SELECT CASE WHEN WM_Template.WBS2 = '500' THEN '1750.00' + WM_Template.WBS2 ELSE '2000.20' + WM_Template.WBS2 END AS WBS2,
WM_Template.WBS3 AS WBS3,
CASE WHEN WM_Template.WBS2 = '260' THEN 'Pre Con Mtg / Inspections/ Punch List' WHEN WM_Template.WBS2 = '250' THEN 'All Environmental Permits & Approvals'
WHEN WM_Template.WBS2 = '150' THEN 'Project Admin / Clerical / Status Reports ' ELSE WM_Template.LongName END AS LongName,
(ISNULL(LB.AmtBud, 0) + ISNULL(EB.AmtBud, 0)) AS AmtBud, SUM(CASE WHEN LedgerAR.TransType <> 'CR ' AND
LedgerAR.Period <= '200408' THEN Ledgerar.amount * - 1 ELSE ' 0 ' END) AS BTD, SUM(CASE WHEN LedgerAR.TransType <> 'CR ' AND
LedgerAR.Period = '200408' THEN Ledgerar.amount * - 1 ELSE ' 0 ' END) AS BillExt
FROM PR LEFT OUTER JOIN
LB ON LB.WBS1 = PR.WBS1 AND PR.WBS2 = LB.WBS2 AND LB.WBS3 = PR.WBS3 LEFT OUTER JOIN
EB ON EB.WBS1 = PR.WBS1 AND PR.WBS2 = EB.WBS2 AND PR.WBS3 = EB.WBS3 LEFT OUTER JOIN
LedgerAR ON LedgerAR.WBS1 = PR.WBS1 AND LedgerAR.WBS2 = PR.WBS2 AND PR.WBS3 = LedgerAR.WBS3 LEFT OUTER JOIN
LedgerAP ON LEdgerAP.WBS1 = PR.WBS1 AND LedgerAP.Wbs2 = PR.WBS2 AND LedgerAP.WBS3 = PR.WBS3 LEFT JOIN
WM_DA_Template ON WM_DA_Template.WBS2 = PR.WBS2 AND PR.WBS3 = WM_DA_Template.WBS3 LEFT OUTER JOIN
WM_Template ON WM_DA_Template.WM_Key = WM_Template.WM_Key
WHERE (PR.WBS2 <> '9001') AND (PR.WBS2 <> '98') AND (PR.WBS2 <> 'zzz') AND (PR.WBS3 <> 'zzz') AND (PR.WBS2 <> '') AND (WM_Template.WBS2 <> '')
AND WM_Template.WBS2 <> '210' AND pr.wbs1 = '001-298'
GROUP BY WM_Template.WBS2, WM_Template.WBS3, WM_Template.LongName, lb.amtbud, eb.amtbud
second query
SELECT WM_Template.WBS2, CASE WHEN (SUM(isnull(LB.AmtBud * - 1, 0)) <> '0') AND (SUM(isnull(EB.AmtBud, 0)) <> '0')
THEN 'HM & SC' WHEN (SUM(isnull(LB.AmtBud * - 1, 0)) <> '0') AND (SUM(isnull(EB.AmtBud, 0)) = '0') THEN 'HM' WHEN (SUM(isnull(LB.AmtBud, 0))
= '0') AND (SUM(isnull(EB.AmtBud, 0)) <> '0') THEN 'SC' WHEN (SUM(isnull(LB.AmtBud, 0)) = '0') AND (SUM(isnull(EB.AmtBud, 0)) = '0')
THEN (CASE WHEN (SUM(isnull(LedgerAP.Amount, 0)) <> '0') THEN 'SC' END) WHEN (SUM(isnull(LB.AmtBud, 0)) = '0') AND (SUM(isnull(EB.AmtBud, 0))
= '0') THEN (CASE WHEN (SUM(isnull(LedgerAR.Amount * - 1, 0)) <> '0') THEN 'HM' END) WHEN (SUM(isnull(LB.AmtBud, 0)) = '0') AND
(SUM(isnull(EB.AmtBud, 0)) = '0') THEN (CASE WHEN (SUM(isnull(LedgerAP.Amount, 0)) <> '0') AND (SUM(isnull(LedgerAR.Amount * - 1, 0)) <> '0')
THEN 'HM & SC' END) ELSE 'N/A' END AS FeeType
FROM PR LEFT OUTER JOIN
LB ON LB.WBS1 = PR.WBS1 AND PR.WBS2 = LB.WBS2 AND LB.WBS3 = PR.WBS3 LEFT OUTER JOIN
EB ON EB.WBS1 = PR.WBS1 AND PR.WBS2 = EB.WBS2 AND PR.WBS3 = EB.WBS3 LEFT OUTER JOIN
LedgerAR ON LedgerAR.WBS1 = PR.WBS1 AND LedgerAR.WBS2 = PR.WBS2 AND PR.WBS3 = LedgerAR.WBS3 LEFT OUTER JOIN
LedgerAP ON LEdgerAP.WBS1 = PR.WBS1 AND LedgerAP.Wbs2 = PR.WBS2 AND LedgerAP.WBS3 = PR.WBS3 LEFT JOIN
WM_DA_Template ON WM_DA_Template.WBS2 = PR.WBS2 AND PR.WBS3 = WM_DA_Template.WBS3 LEFT OUTER JOIN
WM_Template ON WM_DA_Template.WM_Key = WM_Template.WM_Key
WHERE (PR.WBS2 <> '9001') AND (PR.WBS2 <> '98') AND (PR.WBS2 <> 'zzz') AND (PR.WBS3 <> 'zzz') AND (PR.WBS2 <> '') AND (WM_Template.WBS2 <> '')
AND pr.wbs1 = '001-333'
GROUP BY WM_Template.WBS2
I have one data table (tblPresultPeriods) and one lookup table (lkpStatus).
The query is:
select PPPeriodNumber as PeriodNumber, Max(PPstatus) as Status from tblPresultPeriods where ppmemberid = 133 and pptransseq > 0 group by ppperiodnumber
It returns (correctly):
PeriodNumber Status ------------ ------ A1 1 Q1 4 Q2 1
I want to do a join so that I get the lkpStatus.StatusDescription value to display.
The query is:
select PPPeriodNumber, Max(PPstatus)as status, StatusDescription from tblPresultPeriods, lkpStatus where tblPresultPeriods.PPstatus = lkpStatus.Statuscode and ppmemberid = 133 and pptransseq > 0 group by PPPeriodNumber, PPstatus, StatusDescription order by PPPeriodNumber, PPstatus, StatusDescription
but I get (not what I want):
PPPeriodNumber status StatusDescription -------------- ------ -------------------------------------------------- A1 0 Initialize A1 1 Enter Presults Q1 0 Initialize Q1 1 Enter Presults Q1 4 Re-Review Presutls Q2 0 Initialize Q2 1 Enter Presults
because the of the additional group by & order by columns.
I assume this requires a sub-query, but I am baffeled.
Hi, Iwant to make a left join between two tables connected with a specific field but I also want to have some criteria on the right table. I want to display all the rows from the first(left) table and only the rows from the secod (right) table that match the join and the criteria. However If I have criteria on the second table the join behaves like an inner join displaying only the rows that exist in both tables. In MS Access instead of the right table I use a query in which I enter the criteria and then I connect it with a left join in a new query in order to get the right results. How can I do itin MSSQLServer without using Views? Must I use a subquery with Exists and what is the right syntax in order to achieve this?
I know I can't do this but I dont know will work. any help is much appreciated. the code below in red will always return more than one value, and yes the ?? is actually data (dont ask i didnt do it).
I am basically coding this because of the ?? someone before me thought was a good idea.
inner join MHDDTest.dbo.Admin_tbl_Vendor f on (case when len(b.vadr) > 0 then (case when (b.vadr = '??') then (select vendorNumber from MHDDTest.dbo.Admin_tbl_Vendor where (substring(afunction,3,2) + object) = '42305' and substring(vendorNumber,1,5) = b.vend) else b.vend + '-' + b.vadr end) else b.vend end = f.vendorNumber)
After working with Oracle (can I say that out loud here? ) databases for a couple of years, our company recently switched to SQL2005. So far I really like it, and the switch has been relatively easy for me. Except for one thing...
I'm trying to find out how to join a subquery on multiple columns. In Oracle it would like this:
select * from #temp1 where (id_1, id_2) not in (select id_1, id_2 from #temp2)
But this doesn't work in SQL-T. I've temporarily solved it by doing this:
select * from #temp1 where id_1+id_2 not in (select id_1+id_2 from #temp2)
I don't like concat solutions for joins though (it always feels 'unsafe' to me). Plus, I can't believe there's no way to solve this.
I've searched the FAQ and BOL but I just can't seem to find the solution. Please help. I feel stupid.
Hi, I have a long sql query and I have to left join two tables. The problem is that I need to do a subquery in the left join for the second table. Let me give an example.
My second table haves this data: ID GAME CREATED 1 SOCCER 1-8-1980 1 BASKKET 1-9-2000 2 TENIS 1-10-2000 2 GOLF 1-12-2000 2 CARS 1-9-2010 3 BIKE 1-2-1930
My first table left joins the second one by the ID column. So, I want first to determine the max record of each ID of the second table. Ones I have the max record for each ID in table one i want to left join it with table A. How do I have to build the subquery in the inner join? I believe is something like this:
SELECT * FROM TABLE1 LEFT OUTER JOIN TABLE2 (SUBQUERY) TABLE2_ALIAS ON TABLE1.ID = TABLE2_ALIAS.ID
SELECT A.EmpId,A.IncidentDate FROM EmployeePoints1 as A WHERE IncidentDate= (SELECT MAX(IncidentDate) FROM EmployeePoints1 WHERE EmpId = A.EmpId) AND (DATEADD(day,28,DATEADD(WEEK, DATEDIFF(WEEK, 0,A.IncidentDate), 0)) < DATEADD(WEEK, DATEDIFF(WEEK, 0,GetDate()), 0)) AND (A.IncidentCode = 'I' OR A.IncidentCode = 'A') LEFT JOIN EmployeeTotalPoints1 ON EmployeeTotalPoints1.EmpId = A.EmpId
I have got question about the performance of subquery and left outer join
My scenario is that I have two tables Customer Mater and address book.
Customer Mater and address book tables hold the record for both carrier and customer. and i want retrieve the record for customer and related carrier as well
i have two options
1. either use left outer join (i.e. Join Customer master to Address Book 2 times, 1 for customer and 1 for carrier) by:
Address book (as customer) Left outer Join Customer Master (on related Key)
AddressBook (as carrier) Left Outer Join Customer master (on related Key)
2.or use 1 join for customer and use subquery to retrieve carrier name (from Customer table) as I only need that one
Address Book AB (as Customer) Join Customer Master CM Subquery: Select carrier_name From customer_master cm2 where cm2.carrier = ab.carrier
can any one tell one which is the best as far as performance is concern. My opinion is that the subquery is better becuase left outer join will have the overhread of extra columns... not pretty sure about it..
The problem:I'm updating a report to be "multi-language" capable. Previously,any items that had text associated with them were unconditionallypulling in the English text. The database has always been capable ofstoring multiple languages for an item, however.Desired output:Given the test data below, I'd like to get the following resultsselect * from mytestfunc(1)Item_Id, Condition, QuestionText1876, NOfKids <= 10, This many children is unlikely.select * from mytestfunc(2)CheckID, Condition, QuestionText1876, NOfKids <= 10, NULLThe current SQL for my UDF:CREATE FUNCTION Annotated_Check (@Lang_ID int) RETURNS TABLE AS RETURN (SELECT tblCheck.Item_ID, tblCheck.CheckDescr AS Condition,tblQuestionText.QuestionTextFROM tblCheck LEFT OUTER JOIN tblQuestionText ON (tblCheck.Item_ID =tblQuestionText.Item_ID)WHERE ((tblQuestionText.LanguageReference = @Lang_ID) OR(tblQuestionText.LanguageReference IS NULL)))Test data:CREATE TABLE [dbo].[tblCheck] ([Item_ID] [int] NOT NULL ,[CheckDescr] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CreationDate] [datetime] NULL ,[RevisionDate] [datetime] NULL) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]GOALTER TABLE [dbo].[tblCheck] ADDCONSTRAINT [DF__tblCheck__Creati__0D7A0286] DEFAULT (getdate()) FOR[CreationDate],CONSTRAINT [PK_Check] PRIMARY KEY CLUSTERED([Item_ID]) WITH FILLFACTOR = 90 ON [PRIMARY]GOCREATE TABLE [dbo].[tblLanguage] ([ID] [int] IDENTITY (1, 1) NOT NULL ,[Priority] [int] NULL ,[Name] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,[Spoken] [bit] NULL ,[CreationDate] [datetime] NULL ,[RevisionDate] [datetime] NULL) ON [PRIMARY]GOALTER TABLE [dbo].[tblLanguage] WITH NOCHECK ADDCONSTRAINT [PK_Language] PRIMARY KEY CLUSTERED([ID]) WITH FILLFACTOR = 90 ON [PRIMARY]GOALTER TABLE [dbo].[tblLanguage] ADDCONSTRAINT [DF__tblLangua__Creat__2CF2ADDF] DEFAULT (getdate()) FOR[CreationDate],UNIQUE NONCLUSTERED([Priority]) WITH FILLFACTOR = 90 ON [PRIMARY]GOCREATE TABLE [dbo].[tblQuestionText] ([Item_ID] [int] NOT NULL ,[LanguageReference] [int] NOT NULL ,[QuestionText] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[SameAs] [int] NULL ,[CreationDate] [datetime] NULL ,[RevisionDate] [datetime] NULL) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]GOALTER TABLE [dbo].[tblQuestionText] ADDCONSTRAINT [DF__tblQuesti__Creat__76969D2E] DEFAULT (getdate()) FOR[CreationDate],CONSTRAINT [PK_QuestionText] PRIMARY KEY CLUSTERED([Item_ID],[LanguageReference]) WITH FILLFACTOR = 90 ON [PRIMARY]GOINSERT INTO tblCheck (Item_ID, CheckDescr)VALUES(1876, 'NOfKids <= 10')INSERT INTO tblLanguage (ID, Priority, Name, Spoken)VALUES(1,1,'English', 1)INSERT INTO tblLanguage (ID, Priority, Name, Spoken)VALUES(2,2,'Espanol', 1)INSERT INTO tblQuestionText (Item_ID, LanguageReference, QuestionText)VALUES (1876, 1, 'This many children is unlikely.')Any tips or pointers will be appreciated. Thanks.
hello friends.. I am newbie for sql server...I having a problem when executing this procedure .... ALTER PROCEDURE [dbo].[spgetvalues] @Uid intASBEGIN SET NOCOUNT ON; select DATEPART(year, c.fy)as fy, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1% JRF' ) as survivorship, (select contribeamount from wh_contribute where and contribename like 'Gross Earnings' and ) as ytdgross, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1.5% JRP') as totalcontrib, from wh_contribute c where c.uid=@Uid Order by fy Asc .....what is the wrong here?? " Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."please reply asap...
I am getting 2 resultsets depending on conditon, In the secondconditon i am getting the above error could anyone help me..........CREATE proc sp_count_AllNewsPapers@CustomerId intasdeclare @NewsId intset @NewsId = (select NewsDelId from NewsDelivery whereCustomerId=@CustomerId )if not exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count( NewsPapersId) from NewsPapersendif exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count(NewsDelId) from NewsDelivery whereCustomerid=@CustomeridendGO
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
while running the following query.
SELECT DISTINCT EmployeeDetails.FirstName+' '+EmployeeDetails.LastName AS EmpName,
LUP_FIX_DeptDetails.DeptName AS CurrentDepartment,
LUP_FIX_DesigDetails.DesigName AS CurrentDesignation,
LUP_FIX_ProjectDetails.ProjectName AS CurrentProject,
ManagerName=(SELECT E.FirstName+' '+E.LastName
FROM EmployeeDetails E
INNER JOIN LUP_EmpProject
ON E.Empid=LUP_EmpProject.Empid
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid = LUP_FIX_ProjectDetails.Projectid
WHERE LUP_FIX_ProjectDetails.Managerid = E.Empid)
FROM EmployeeDetails
INNER JOIN LUP_EmpDepartment
ON EmployeeDetails.Empid=LUP_EmpDepartment.Empid
INNER JOIN LUP_FIX_DeptDetails
ON LUP_EmpDepartment.Deptid=LUP_FIX_DeptDetails.Deptid
AND LUP_EmpDepartment.Date=(SELECT TOP 1 LUP_EmpDepartment.Date
FROM LUP_EmpDepartment
WHERE EmployeeDetails.Empid=LUP_EmpDepartment.Empid
ORDER BY LUP_EmpDepartment.Date DESC)
INNER JOIN LUP_EmpDesignation
ON EmployeeDetails.Empid=LUP_EmpDesignation.Empid
INNER JOIN LUP_FIX_DesigDetails
ON LUP_EmpDesignation.Desigid=LUP_FIX_DesigDetails.Desigid
AND LUP_EmpDesignation.Date=(SELECT TOP 1 LUP_EmpDesignation.Date
FROM LUP_EmpDesignation
WHERE EmployeeDetails.Empid=LUP_EmpDesignation.Empid
ORDER BY LUP_EmpDesignation.Date DESC)
INNER JOIN LUP_EmpProject
ON EmployeeDetails.Empid=LUP_EmpProject.Empid
AND LUP_EmpProject.StartDate=(SELECT TOP 1 LUP_EmpProject.StartDate
FROM LUP_EmpProject
WHERE EmployeeDetails.Empid=LUP_EmpProject.Empid
ORDER BY LUP_EmpProject.StartDate DESC)
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid=LUP_FIX_ProjectDetails.Projectid
I've running the below query for months ans suddenly today started getting the following error :"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."
Any ideas as to why??
SELECT t0.DocNum, t0.Status, t0.ItemCode, t0.Warehouse, t0.OriginNum, t0.U_SOLineNo, ORDR.NumAtCard, ORDR.CardCode, OITM_1.U_Cultivar, RDR1.U_Variety, (SELECT OITM.U_Variety FROM OWOR INNER JOIN WOR1 ON OWOR.DocEntry = WOR1.DocEntry INNER JOIN OITM INNER JOIN OITB ON OITM.ItmsGrpCod = OITB.ItmsGrpCod ON WOR1.ItemCode = OITM.ItemCode WHERE (OITB.ItmsGrpNam = 'Basic Fruit') AND (OWOR.DocNum = t0.DocNum)) AS Expr1, OITM_1.U_Organisation, OITM_1.U_Commodity, OITM_1.U_Pack, OITM_1.U_Grade, RDR1.U_SizeCount, OITM_1.U_InvCode, OITM_1.U_Brand, OITM_1.U_PalleBase, OITM_1.U_Crt_Pallet, OITM_1.U_LabelType, RDR1.U_DEPOT, OITM_1.U_PLU, RDR1.U_Trgt_Mrkt, RDR1.U_Wrap_Type, ORDR.U_SCCode FROM OWOR AS t0 INNER JOIN ORDR ON t0.OriginNum = ORDR.DocNum INNER JOIN RDR1 ON ORDR.DocEntry = RDR1.DocEntry AND t0.U_SOLineNo - 1 = RDR1.LineNum INNER JOIN OITM AS OITM_1 ON t0.ItemCode = OITM_1.ItemCode WHERE (t0.Status <> 'L')
Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)
Mar 27 2006 11:51:52
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
sp_dboption 'BB_XXXXX'
The following options are set:
-----------------------------------
trunc. log on chkpt.
auto create statistics
auto update statistics
OK, the problem is that if a run the below query in server01, i get error 512:
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
But, if run the same query in the server02, the query work fine -.
I know that I can use IN, EXISTS, TOP, etc ... but I need understand this behavior.
I am trying to add the results of both of these queries together:
The purpose of the first query is to find the number of nulls in the TimeZone column.
Query 1:
SELECT COUNT(*) - COUNT (TimeZone) FROM tablename
The purpose of the second query is to find results in the AAST, AST, etc timezones.
Query 2:
SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')
Note: both queries produce a whole number with no decimals. Ran individually both queries produce accurate results. However, what I would like is one query which produced a single INT by adding both results together. For example, if Query 1 results to 5 and query 2 results to 10, I would like to see a single result of 15 as the output.
What I came up with (from research) is:
SELECT ((SELECT COUNT(*) - COUNT (TimeZone) FROM tablename) + (SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST'))
I get a msq 102, level 15, state 1 error.
I also tried
SELECT ((SELECT COUNT(*) - COUNT (TimeZone) FROM tablename) + (SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')) as IVR_HI_n_AK_results
but I still get an error. For the exact details see:
[URL]
NOTE: the table in query 1 and query 2 are the same table. I am using T-SQL in SQL Server Management Studio 2008.
I was writing a query using both left outer join and inner join. And the query was ....
SELECT Â Â Â Â Â Â Â S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname FROM Â Â Â Â Â Â Â Production.Suppliers AS S LEFT OUTER JOIN Â Â Â Â Â Â (Production.Products AS P Â Â Â Â Â Â Â Â INNER JOIN Production.Categories AS C
[code]....
However ,the result that i got was correct.But when i did the same query using the left outer join in both the cases
i.e..
SELECT Â Â Â Â Â Â Â S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname FROM Â Â Â Â Â Â Â Production.Suppliers AS S LEFT OUTER JOIN (Production.Products AS P LEFT OUTER JOIN Production.Categories AS C ON C.categoryid = P.categoryid) ON S.supplierid = P.supplierid WHERE S.country = N'Japan';
The result i got was same,i.e
supplier   country   productid   productname   unitprice   categorynameSupplier QOVFD   Japan   9   Product AOZBW   97.00   Meat/PoultrySupplier QOVFD   Japan  10   Product YHXGE   31.00   SeafoodSupplier QOVFD   Japan  74   Product BKAZJ   10.00   ProduceSupplier QWUSF   Japan   13   Product POXFU   6.00   SeafoodSupplier QWUSF   Japan   14   Product PWCJB   23.25   ProduceSupplier QWUSF   Japan   15   Product KSZOI   15.50   CondimentsSupplier XYZ   Japan   NULL   NULL   NULL   NULLSupplier XYZ   Japan   NULL   NULL   NULL   NULL
and this time also i got the same result.My question is that is there any specific reason to use inner join when join the third table and not the left outer join.
OLEDB source 1 SELECT ... ,[MANUAL DCD ID] <-- this column set to sort order = 1 ... FROM [dbo].[XLSDCI] ORDER BY [MANUAL DCD ID] ASC
OLEDB source 2 SELECT ... ,[Bo Tkt Num] <-- this column set to sort order = 1 ... FROM ....[dbo].[FFFenics] ORDER BY [Bo Tkt Num] ASC
These two tasks are followed immediately by a MERGE JOIN
All columns in source1 are ticked, all column in source2 are ticked, join key is shown above. join type is left outer join (source 1 -> source 2)
result of source1 (..dcd column) ... 4-400-8000119 4-400-8000120 4-400-8000121 4-400-8000122 <--row not joining 4-400-8000123 4-400-8000124 ...
result of source2 (..tkt num column) ... 4-400-1000118 4-400-1000119 4-400-1000120 4-400-1000121 4-400-1000122 <--row not joining 4-400-1000123 4-400-1000124 4-400-1000125 ...
All other rows are joining as expected. Why is it failing for this one row?
I'm having trouble with a multi-table JOIN statement with more than one JOIN statement.
For each order, I need to return the following: CarsID, CarModelName, MakeID, OrderDate, ProductName, Total ordered the Car Category.
The carid (primary key) and carmodelname belong to the Cars table. The makeid and orderdate belong to the OrderDetails table. The productname and carcategory belong to the Product table.
The number of rows returned should be the same as the number of rows in OrderDetails.
Why would I use a left join instead of a inner join when the columns entered within the SELECT command determine what is displayed from the query results?
I have a merge join (full outer join) task in a data flow. The left input comes from a flat file source and then a script transformation which does some custom grouping. The right input comes from an oledb source. The script transformation output is asynchronous (SynchronousInputID=0). The left input has many more rows (200,000+) than the right input (2,500). I run it from VS 2005 by right-click/execute on the data flow task. The merge join remains yellow and the task never finishes. I do see a row count above the flat file destination that reaches a certain number and seems to get stuck there. When I test with a smaller file on the left it works OK. Any suggestions?
A piece of software I wrote starting timing out on a query that left outer joins a table to a view. Both the table and view have approximately the same number of rows (about 170000).
The table has 2 very similar columns, one is a varchar(1) and another is varchar(100). Neither are included in any index and beyond the size difference, the columns have the same properties. One of the employees here uses the varchar(1) column (called miscsearch) to tag large sets of rows to perform some action on. In this case, he had set 9000 rows miscsearch value to "g". The query then should join the table and view for all rows where miscsearch is set to g in the table. This query takes at least 20 minutes to run (I stopped it at this point).
If I remove the "where" clause and join all rows in the two tables, the query completes in about 20 seconds. If set the varchar(100) column (called descrip) to "g" for the same rows set via miscsearch, the query completes in about 20 seconds.
If I force the join type to a hash join, the query completes using miscsearch in about 30 seconds.
So, this works:
SELECT di.File_No, prevPlacements, balance,'NOT PLACED' as status FROM Info di LEFT OUTER HASH JOIN View_PP pp ON di.ram_file_no = pp.file_no WHERE miscsearch = 'g' ORDER BY balance DESC
and this works:
SELECT di.File_No, prevPlacements, balance,'NOT PLACED' as status FROM Info di LEFT OUTER JOIN View_PP pp ON di.ram_file_no = pp.file_no WHERE descrip = 'g' ORDER BY balance DESC
But this does't:
SELECT di.File_No, prevPlacements, balance,'NOT PLACED' as status FROM Info di LEFT OUTER JOIN View_PP pp ON di.ram_file_no = pp.file_no WHERE miscsearch = 'g' ORDER BY balance DESC
What should I be looking for here to understand why this is happening?
We are trying to migrate from sql 2005 to 2012. I am changing one of the implicit join to explicit join. As soon as I change the join, the number of rows returned are fewer than before.
INSERT #RIF_TEMP1 (rf1_row_no,rf1_rif, rf1_key_id_no, rf1_last_date, rf1_start_date) SELECT currow.rf0_row_no, currow.rf0_rif, currow.rf0_key_id_no, prevrow.rf0_start_date, currow.rf0_start_date FROM #RIF_TEMP0 currow LEFT JOIN #RIF_TEMP0 prevrow ON (currow.rf0_row_no = prevrow.rf0_row_no + 1)
[Code] ....
the count returned from both the queries is different.
I am not sure what am I doing wrong. The count of #RIF_TEMP0 is always 32, it never changes, but the variable @countTemp is different for both the queries.
Why does this right join return the same results as using a left (or even a full join)?There are 470 records in Account, and there are 1611 records in Contact. But any join returns 793 records.
select Contact.firstname, Contact.lastname, Account.[Account Name] from Contact right join Account on Contact.[Account Name] = Account.[Account Name] where Contact.[Account Name] = Account.[Account Name]
Is there a way to do a super-table join ie two table join with no matching criteria? I am pulling in a sheet from XL and joining to a table in SQLServer. The join should read something like €œfor every row in the sheet I need that row and a code from a table. 100 rows in the sheet merged with 10 codes from the table = 1000 result rows.
This is the simple sql (no join on the tables):
select 1.code, 2.rowdetail from tblcodes 1, tblelements 2
I read that merge joins work a lot faster than hash joins. How would you convert a hash join into a merge join? (Referring to output on Execution Plan diagrams.) THANKS
There is a table called "tblvZipCodes" that contain a zipcode of all cities, area code that are located in that zip code.
The problem I have with the inner join is that there are more than 1 cities in one zipcode code. Is there a way to just return only the 1st row and not return the rest of the rows from the tblvZipCodes in the INNER JOIN query?
Thanks..
Code:
SELECT TOP 100 PERCENT dbo.tblPurchaseRaw.Year, dbo.tblPurchaseRaw.Make, dbo.tblPurchaseRaw.Model, dbo.tblPurchaseRaw.ModelType, dbo.tblPurchaseRaw.Color, dbo.tblvZipCodes.ZIPCode, dbo.tblvZipCodes.City, dbo.tblvZipCodes.County, dbo.tblvZipCodes.State, dbo.tblvZipCodes.AreaCode, dbo.tblvZipCodes.Region, dbo.tblaAccounts.Name, dbo.tblaAccounts.PhoneOne, dbo.tblaAccounts.AccountID, dbo.tblPurchaseRaw.AcceptedID, dbo.tblPurchaseRaw.Series, dbo.tblPurchaseRaw.BodyStyle, dbo.tblaAccounts.WebSite, dbo.tblaAccounts.SalesEmail, dbo.tblPurchaseRaw.EmailTo, dbo.tblPurchaseRaw.PhotoURL, dbo.tblPurchaseRaw.Mileage, dbo.tblPurchaseRaw.RawID, dbo.tblvRegions.Name AS RegionName, dbo.tblPurchaseRaw.VIN, dbo.tblPurchaseRaw.Style, dbo.tblPurchaseRaw.StockDate FROM dbo.tblPurchaseRaw INNER JOIN dbo.tblaAccounts ON dbo.tblPurchaseRaw.AccountID = dbo.tblaAccounts.AccountID INNER JOIN dbo.tblvZipCodes ON dbo.tblPurchaseRaw.ZipCode = dbo.tblvZipCodes.ZIPCode INNER JOIN dbo.tblvRegions ON dbo.tblvZipCodes.Region = dbo.tblvRegions.RegionID WHERE (CONVERT(char, dbo.tblPurchaseRaw.StockDate, 101) <> '01/01/1900') AND (dbo.tblPurchaseRaw.SoldRawID IS NULL) AND (dbo.tblPurchaseRaw.AcceptedID <> - 10) AND (dbo.tblPurchaseRaw.AcceptedID <> - 1) ORDER BY dbo.tblvZipCodes.ZIPCode
hello, i am running mysql server 5 and i have sql syntax like this: select sales.customerid as cid, name, count(saleid) from sales inner join customers on customers.customerid=sales.customerid group by sales.customerid order by sales.customerid; it works fine and speedy. but when i change inner join to right join, in order to get all customers even there is no sale, my server locks up. note: there is about 10000 customers and 15000 sales. what can be the problem? thanks,
