select @cmd = 'select uid from ' + ltrim(rtrim(@db))'..sysusers where name = ' + "'" + ltrim(rtrim(@OldOwner)) + "'"
exec (@cmd)
How can I use @OldID to hold on UID return from this statement.
When I try use:
select @cmd = 'select @OldID = uid from ' + ltrim(rtrim(@db))'..sysusers where name = ' + "'" + ltrim(rtrim(@OldOwner)) + "'"
then I'm getting a error message: @OldID not declare.
I use OdbcConnection inside clr procedure, for getting data. If I use simple EXEC dbo.clr_proc - all is OK. If I use INSERT...EXEC I recive error message: Distributed transaction enlistment failed.
I set MSDTC security options for No Authentification and Allow inbound and Allow outbound, but it's no use.
Have this problem solution? May be, I must use another method to get my data?
P.S. Linked Servers and OPENQUERY is not applicable. Sybase not describe columns in stored proc result set and one stored proc may return different result set by params.
Hi, I have written a stored proc to bulk insert the data from a data file. I have a requirement that i need to insert the data into a table of which the name is not known. I mean to say that the table name will be passed as a parameter to the stored proc. And also i need to insert the date that will also be passed as the parameter to the stored proc
The follwing statement works fine if i give the table name directly in the query
Code Snippet
DECLARE @LastUpdate varchar(20)
SET @LastUpdate = 'Dec 11 2007 1:20AM'
INSERT INTO Category SELECT MSISDN, @LastUpdate FROM OPENROWSET( BULK '\remotemachinedatafile.txt', FORMATFILE = '\remotemachineFormatFile.fmt', FIRSTROW = 2) AS a
To satisfy my requirement ( i.e passing the table name dynamically , and the date) , i have formed the query string ( exact one as above ) and passing it to EXEC statement. But its failing as explained below
Code Snippet
@Category - Will be passed as a parameter to the stored proc
Print @vsBulkSQL - This prints the folliwing statement
INSERT INTO Category SELECT MSISDN, 'Dec 11 2007 1:20AM' FROM OPENROWSET ( BULK '\remotemachineDataFile.txt' , FORMATFILE ='\remotemachineFormatFile.fmt', FIRSTROW =2) AS a
Exec @vsBulkSQL - This statement gives the following error
The name 'INSERT INTO Sports SELECT MSISDN, 'Dec 11 2007 1:20AM' FROM OPENROWSET ( BULK '\remotemachineSecond.txt' , FORMATFILE ='\remotemachineFormatFile.fmt', FIRSTROW =2) AS a' is not a valid identifier.
Can any one please point out where am i doing wrong? Or do i need to do anything else to achive the same
Using SQL Server 7.0, I am trying to use a variable string called from a form to perform a simple query.
Here's what it looks like:
[after submitting a form on the previous page with a drop down list box titled "fiscal"]
dim strYear
strYear = Request.Form("fiscal")
sql = "SELECT * FROM VENDOR WHERE STATUS = 'P' AND '"& strYear &"';"
[where strYear is the following: PYMNT_DT > ''12/31/98'']
Records exist that meet this criteria. If the PYMNT_DT > '12/31/98' is hardcoded into the sql statement, 12 records are returned. However, when the variable string is used instead, no records are found. Any ideas on how this problem might be fixed?
I have a stored proc that builds a character string from a number of rows returned from a select query. Is there anyway to insert a carriage return after I append the value of each row to the string variable?
ALTER PROCEDURE [dbo].[sp_SelectMostRecentArticle]
AS BEGIN
DECLARE @article_id INT SELECT @article_id = ( SELECT TOP 1 article_id FROM article ORDER BY article_id DESC )
DECLARE @comment_count INT SELECT @comment_count = ( SELECT COUNT(comment_id) FROM comment JOIN article ON article_id = comment_article_id GROUP BY article_id HAVING article_id = @article_id )
SELECT TOP 1 article_id, article_author_id, article_title, article_body, article_post_date, article_edit_date, article_status, article_author_id article_author_ip, author_display_name, category_id, category_name--, comment_count AS @comment_count
FROM article
JOIN author ON author_id = article_author_id JOIN category ON category_id = article_category_id
GROUP BY article_id, article_title, article_body, article_post_date, article_edit_date, article_status, article_author_ip,article_author_id, author_display_name, category_id, category_name
HAVING article_id = @article_id
END GO
as you can see, im trying to return a comment_count value, but the only way I can do this is by defining the variable.
I have had to do it this way, because I cannot say COUNT(comment.comment_id) AS comment_count or it returns an error that it cant reference the comment.comment_id.
But when change it to FROM article, comment; I get errors about the article_author_id and article_comment_id.
And i cant add a join, because it would return the amount of rows of the comment...
unless someone could help with what i Just decribed (as i would prefer to do it this way), how would i return the variable value as part of the select statement?
We need to pull from a table that is named tablename_mmddyy and populate a table with the same format tablename_mmddyy. The date will be different every month so I want to be able to build the tablenames every month. Is there a way to do this in SSIS? Thank you.
I'm using a file Task to rename files to include a Month and Year in the FIle. Part of the requirement in the file name is a two digit month. I have the following query built which will return a two digit month regardless if it's a one or two digit month.
I need retrieve only strings that hold the sub-string in middle. no first no last just middle.
See: the sub-string is "test"
Yes: test test test Yes: take test test Yes: test test take Yes: take test take No: test test No: test take take No: take take test No: test
I prepare sample data...
declare @sample table(s varchar(50)); insert @sample values ('test test test'), ('test test'), ('test'), ('test take test'), ('test take take'), ('take test test'), ('take test take');
I'm trying to add a 'change password' control to my site and seem to be having some issues. I have code that works if I statically define what user is displayed on the form, but I cant get it to detect the 'authenticated' user and show them the reset for for that ID.If I take the "+ myid" out of the select statement and just define the username statically the form works properly. Error:System.Data.SqlClient.SqlException: The column prefix 'System.Security.Principal' does not match with a table name or alias name used in the query. Here's a piece of the code that is supposed to detect the current logged in user. However, it gives the error. (some of the code may be redundant but its not causing issues that I can tell) public void InitPage() { IPrincipal p = HttpContext.Current.User; String myid = HttpContext.Current.User.ToString(); SqlServer sqlServer = new SqlServer(Util.SqlConnectionString()); DataTable dt; SqlConnection cnn = new SqlConnection(ConfigurationManager.ConnectionStrings["myconnection"].ConnectionString); SqlDataAdapter cmd1 = new SqlDataAdapter("select * from USER WHERE USER_NAME = "+ myid, cnn); DataTable UIDtable = new DataTable(); cmd1.Fill(UIDtable); User_Id.Value = UIDtable.Rows[0]["ID"].ToString(); dt = sqlServer.USER_SELECT(Util.SiteURL(Request.QueryString["Pg"].ToString()), User_Id.Value);
I have a select statement and I would like to know which when clause(1st set of whens) was fired and the value of the then for further use in my query. I am wondering if this is possibly, and how it would be done. If i try and set a @variable at the beginning of the case statament i get an error, here is my query SELECT PIE.productID, PIE.quantity, CEILING((PIE.width/12.0)/0.5)*.5 as width, CEILING((PIE.length/12.0)/0.5)*.5 as length, ***throws an error**** @sqft = CASE --- but the then clause of this CASE is the value i want for later use in this same query WHEN CEILING((PIE.width/12.0)/0.5)*.5 > (2.0 * (CEILING((PIE.length/12.0)/0.5)*.5)) THEN CEILING((((CEILING((PIE.width/12.0)/0.5)*.5) * 1.5) * CEILING((PIE.length/12.0)/0.5)*.5)/1.0)*1.0 WHEN CEILING((PIE.length/12.0)/0.5)*.5 > (2.0 * (CEILING((PIE.width/12.0)/0.5)*.5)) THEN CEILING((((CEILING((PIE.length/12.0)/0.5)*.5) * 1.5) * CEILING((PIE.width/12.0)/0.5)*.5)/1.0)*1.0 ELSE CEILING((CEILING((PIE.length/12.0)/0.5)*.5) * (CEILING((PIE.width/12.0)/0.5)*.5)/1.0)*1.0 END AS sqft, CASE WHEN @custMarkup = 1 THEN (SELECT PML1 FROM ProductMarkup PM WHERE PIE.productID = PM.productID) WHEN @custMarkup = 2 THEN (SELECT PML2 FROM ProductMarkup PM WHERE PIE.productID = PM.productID) WHEN @custMarkup = 3 THEN (SELECT PML3 FROM ProductMarkup PM WHERE PIE.productID = PM.productID) WHEN @custMarkup = 4 THEN (SELECT PML4 FROM ProductMarkup PM WHERE PIE.productID = PM.productID) WHEN @custMarkup = 5 THEN (SELECT PML5 FROM ProductMarkup PM WHERE PIE.productID = PM.productID) END AS markup FROM ProductsInEstimate PIE WHERE estID = @estid
i am using a OLE DB Source in my dataflow component and want to select rows from the source based on the Name I enter during execution time. I have created two variables,
enterName - String packageLevel (will store the name I enter)
myVar - String packageLevel. (to store the query)
I am assigning this query to the myVar variable, "Select * from db.Users where (UsrName = " + @[User::enterName] + " )"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, enterName,. I select that and when I click on OK am getting this error.
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
myVar variable, i have set the ExecuteAsExpression Property to true too.
Hi, I have an sql query like this :DECLARE @TableName varchar(200), @ColumnName varchar(200), @EmployeeID varchar(200), @Result varchar(200);SET @TableName = 'Customer';SET @ColumnName = 'First_Name';SET @CustomerID = 28;-- This line return ErrorSET @Result = EXEC ('select' + @ColumnName + ' from ' + @TableName + ' where Recid = ' + @CustomerID + '');Print @Result; I am pretty sure the SELECT statement in EXEC will only return 0 or 1 record. But how to capture result from EXEC? Thanks
OK, I'm fairly new to SQL Server, but I know SQL and databases pretty well. I'm just starting to use the dynamic SQL feature of SQL Server (with EXEC), and am wondering how to return a scalar value from a dynamic SQL expression. I realize I can't use EXEC in a user-defined function, but I want to create a stored procedure with one OUTPUT variable so I can simulate a function. The following code does not work, because EXEC does not return a value:
I have 2 variables, one is the column name of the table and the otherone is the table name and I need to write this in the "Execute SQLtask" of a "For each loop" container in a ssis package like this:Truncate table <tableName>Insert into <tableName>Exec (' select [' + ?+ '] from '+ ?)It gives me error message when I try run the ssis. However if I putthe above statements into a stored procedure and wrote look this, itworks:spStroedproc ?, ?Do I need to change any of my settings for my "Exec" to work?Thank you in advance
Hi I have a maintenance proceudre that trims data tables on the live site, but prior to trimming i need to execute procs via linked servers at four seprate locations (subscribers) to ensure all of their data is up to date before the trim happens (the deletes are blocked at the subs). my problem is that if i go exec @error_id = procname and an error such as permission being denied or proc missing, the return code is still 0 - therefor it looks like th proc ran successfully, meanwhile it didnt. does anyone know how to check for these sorts of erors, so i dont leave this to chance?
I am trying to find a way to return the result of an EXEC(*sqlstring*) from a function. I can return the tsql but not the result of an execute.
This is my function:
ALTER FUNCTION [dbo].[ReturnPickItemValue] ( -- Add the parameters for the function here @TypeID int, @CaseID int ) RETURNS varchar(max) AS BEGIN -- Declare the return variable here DECLARE @RTN varchar(max)
IF(SELECT IncludeDates FROM TBL_LU_PICK WHERE PickTypeID = @TypeID) = 1 BEGIN SET @RTN = 'SELECT PickItem I + CASE D.IsStartDateEstimated WHEN 0 THEN CAST(StartDate as varchar) ELSE CAST(dbo.ReturnEstimatedDate(D.IsStartDateEstimated, 0) as varchar) END + CASE D.IsEndDateEstimated WHEN 0 THEN CAST(EndDate as varchar) ELSE CAST(dbo.ReturnEstimatedDate(D.IsEndDateEstimated, 1) as varchar) END
FROM TBL_LU_PICK L INNER JOIN TBL_Pick_Items I ON I.PickTypeID = L.PickTypeID INNER JOIN TBL_PICK P ON P.PickItemID = I.PickItemID LEFT JOIN TBL_PickDates D ON D.PickID = P.PickID WHERE L.PickTypeID = ' + CAST(@TypeID as varchar) + ' AND P.CaseID = ' + CAST(@CaseID as varchar) END ELSE BEGIN SET @RTN= 'SELECT I.PickItem FROM TBL_LU_PICK L INNER JOIN TBL_Pick_Items I ON I.PickTypeID = L.PickTypeID INNER JOIN TBL_Pick P ON P.PickItemID = I.PickItemID WHERE L.PickTypeID = ' + CAST(@TypeID as varchar) + ' AND CaseID = ' + CAST(@CaseID as varchar) END
RETURN @RTN
END
Each time I try " RETURN EXEC(@RTN) " or something similar I get an error.
I have tried executing the tsql and assigning the result to a varchar and returning that varchar but i get an error.
I'm new to SSIS, but have been programming in SQL and ASP.Net for several years. In Visual Studio 2005 Team Edition I've created an SSIS that imports data from a flat file into the database. The original process worked, but did not check the creation date of the import file. I've been asked to add logic that will check that date and verify that it's more recent than a value stored in the database before the import process executes.
Here are the task steps.
[Execute SQL Task] - Run a stored procedure that checks to see if the import is running. If so, stop execution. Otherwise, proceed to the next step.
[Execute SQL Task] - Log an entry to a table indicating that the import has started.
[Script Task] - Get the create date for the current flat file via the reference provided in the file connection manager. Assign that date to a global value (FileCreateDate) and pass it to the next step. This works.
[Execute SQL Task] - Compare this file date with the last file create date in the database. This is where the process breaks. This step depends on 2 variables defined at a global level. The first is FileCreateDate, which gets set in step 3. The second is a global variable named IsNewFile. That variable needs to be set in this step based on what the stored procedure this step calls finds out on the database. Precedence constraints direct behavior to the next proper node according to the TRUE/FALSE setting of IsNewFile.
If IsNewFile is FALSE, direct the process to a step that enters a log entry to a table and conclude execution of the SSIS.
If IsNewFile is TRUE, proceed with the import. There are 5 other subsequent steps that follow this decision, but since those work they are not relevant to this post. Here is the stored procedure that Step 4 is calling. You can see that I experimented with using and not using the OUTPUT option. I really don't care if it returns the value as an OUTPUT or as a field in a recordset. All I care about is getting that value back from the stored procedure so this node in the decision tree can point the flow in the correct direction.
The SSIS package passes the FileCreateDate parameter to this procedure, which then compares that parameter with the date saved in tbl_ImportFileCreateDate.
If the date is newer (or if there is no date), it updates the field in that table and returns a TRUE IsNewFile bit value in a recordset.
Otherwise it returns a FALSE value in the IsNewFile column.
SELECT @CreateDateInTable = FileCreateDate FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName
IF EXISTS (SELECT ProcessName FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName)
BEGIN
-- The process exists in tbl_ImportFileCreateDate. Compare the create dates.
IF (@FileCreateDate > @CreateDateInTable)
BEGIN
-- This is a newer file date. Update the table and set @IsNewFile to TRUE.
UPDATE tbl_ImportFileCreateDate
SET FileCreateDate = @FileCreateDate
WHERE ProcessName = @ProcessName
SET @IsNewFile = 1
END
ELSE
BEGIN
-- The file date is the same or older.
SET @IsNewFile = 0
END
END
ELSE
BEGIN
-- This is a new process for tbl_ImportFileCreateDate. Add a record to that table and set @IsNewFile to TRUE.
INSERT INTO tbl_ImportFileCreateDate (ProcessName, FileCreateDate)
VALUES (@ProcessName, @FileCreateDate)
SET @IsNewFile = 1
END
SELECT @IsNewFile
The relevant Global Variables in the package are defined as follows: Name : Scope : Date Type : Value FileCreateDate : (Package Name) : DateType : 1/1/2000 IsNewFile : (Package Name) : Boolean : False
Setting the properties in the "Execute SQL Task Editor" has been the difficult part of this. Here are the settings.
General Name = Compare Last File Create Date Description = Compares the create date of the current file with a value in tbl_ImportFileCreateDate. TimeOut = 0 CodePage = 1252 ResultSet = None ConnectionType = OLE DB Connection = MyServerDataBase SQLSourceType = Direct input IsQueryStoredProcedure = False BypassPrepare = True
I tried several SQL statements, suspecting it's a syntax issue. All of these failed, but with different error messages. These are the 2 most recent attempts based on posts I was able to locate. SQLStatement = exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output SQLStatement = exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
Parameter Mapping Variable Name = User::FileCreateDate, Direction = Input, DataType = DATE, Parameter Name = 0, Parameter Size = -1 Variable Name = User::IsNewFile, Direction = Output, DataType = BYTE, Parameter Name = 1, Parameter Size = -1
Result Set is empty. Expressions is empty.
When I run this in debug mode with this SQL statement ... exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output ... the following error message appears.
SSIS package "MyPackage.dtsx" starting. Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
When the above is run tbl_ImportFileCreateDate does not get updated, so it's failing at some point when calling the procedure.
When I run this in debug mode with this SQL statement ... exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output ... the tbl_ImportFileCreateDate table gets updated. So I know that data piece is working, but then it fails with the following message.
SSIS package "MyPackage.dtsx" starting. Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC001F009 at GLImport: The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. ". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
The IsNewFile global variable is scoped at the package level and has a Boolean data type, and the Output parameter in the stored procedure is defined as a Bit. So what gives?
The "Possible Failure Reasons" message is so generic that it's been useless to me. And I've been unable to find any examples online that explain how to do what I'm attempting. This would seem to be a very common task. My suspicion is that one or more of the settings in that Execute SQL Task node is bad. Or that there is some cryptic, undocumented reason that this is failing.
Hi everybody, I would like to know if it's possible to execute a stored procedure, passing it parameters, using not CommandType.StoredProcedure value of sqlcommand, but CommandType.Text.
I tried to use this: sqlCmd.CommandType = CommandType.Text sqlCmd.Parameters.Add(sqlPar) sqlCmd.ExecuteNonQuery()
With this sql command: "exec sp ..."
I wasn't able to make it to work, and I don't know if it's possible.
Another question: if it's not possible, how can I pass a Null value to stored procedure? This code: sqlPar = new SqlParameter("@id", SqlDbType.Int) sqlPar.Direction = ParameterDirection.Output cmd.Parameters.Add(sqlPar)
sqlPar = new SqlParameter("@parent_id", DBNull) cmd.Parameters.Add(sqlPar)
doesn't work, 'cause I get this error: BC30684: 'DBNull' is a type and cannot be used as an expression.
How can I solve this? Bye and thanks in advance.
P.S. I would prefer first method to call a stored procedure ('cause I could call it with 'exec sp null' sql command, solving the other problem), but obviusly if it's possible...=)
I use new query to execute my store procedure but didnt return any value is that any error for my sql statement??
USE [Pharmacy_posicnet] GO /****** Object: StoredProcedure [dbo].[usp_sysconf] Script Date: 22/07/2015 4:01:38 PM ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER procedure [dbo].[usp_sysconf]
I wanted to insert the result-set of a Exec(@sqlcommand) into a temp table. I can do that by using:
Insert into #temp Exec(@sqlcommand)
For this to accomplish we need to define the table structure in advance. But am preparing a dynamic-sql command and storing that in variable @sqlcommand and the output changes for each query execution. So my question is how to insert/capture the result-set of Exec(@sqlcommand) into a temp table when we don't know the table structure.
I want to pass the results of a stored proc into a table variable in SQL SEVER 2000. Something like this declare @a table ( employeeid int )exec @a=dbo.MetricsProcessor_GetTopEmployees @parameter1, @parameter2 How can i do this? This is throwing an error. Thanks.
Hi!Can anybody give me a hint how to put sa resut from EXEC into avariable.EXEC is called:EXEC(@TmpQuery) and it returns a single int value (SELECT COUNT(*)....)Thanks!Mario.
Hello,I am fairly new at stored procedures. I have created some that willgo through a table and return a start date and an end date that isdependent upon the fiscal period you want, but I then need to usethose dates in another stored procedure to retrieve the information Ineed. My stored procedure looks like this.================================================== ====================CREATE PROCEDURE dbo.R920ExtTotal@MthsBack Decimal OUTPUTASDECLARE @sSQL AS NVARCHAR(255), @StartDate as SMALLDATETIME, @EndDateas SMALLDATETIMEExec @StartDate = GetMthStart @MthsBackExec @EndDate = GetMthEnd @MthsBackSET @sSQL = 'Select count(extension) as Total From r920f00 Where([date] BETWEEN "' +CONVERT(nvarchar, @StartDate) +'" and "' +CONVERT(nvarchar, @EndDate) +'")'Select @sSQLEXEC (@sSQL)ReturnGO================================================== ===============The problem is my variables @StartDate and @EndDate do not retaintheir values after the EXEC statement and revert to 01/01/1900. Howcan I get around this problem?Thanks!!!!Chip
