I have a table thats updated daily with monthly data totals:
Month, Total orders1, Total orders2, etc
12/01/2012, 5, 8, etc
11/01/2012, 6, 5, etc
How do I pull data from this table in SQL Server for ONLY the current month? I was thinking using the getdate() function to get the current month, but it doesn't match exactly so I get no results
I need to get previous month data in the table based on current date.
In case of execution of each month, the data for previous month should come with date as between
create table TestDate
(Sno Int,
Name varchar(100),
DateofJoin datetime)
insert into TestDate values (1,'Raj', '2/21/2014')
insert into TestDate values (1,'Britto', '6/12/2014')
insert into TestDate values (1,'Kumar', '5/14/2014')
insert into TestDate values (1,'Selva', '6/27/2014')
insert into TestDate values (1,'Ravi', '5/2/2014')
insert into TestDate values (1,'Gopu', '6/2/2014')
/*
if I execute in month July ( ie: today)
select * from TestDate where dateofjoin between 1-june-2014 and 30-june-2014
Result
5 Ravi 2014-05-02 00:00:00.000
3 Kumar 2014-05-14 00:00:00.000
if I execute in month June
select * from TestDate where dateofjoin between 1-may-2014 and 30-may-2014
Result
6Gopu2014-06-02 00:00:00.000
2Britto2014-06-12 00:00:00.000
4Selva2014-06-27 00:00:00.000
/*
I have a series of daily data and I am looking to filter for month end business days and create a sum.
This piece of code gets what I need, arbitrarily, for the 7th day of every month. How can I amend the code so that rather than 7, I have the last business day of every month?
select FROM_DATE, PORTFOLIO, SUM(VALUES) from MyTable
where DATEPART(day,FROM_DATE) = 7
group by FROM_DATE, PORTFOLIO
I have the following code for last business day of month (from a previous question raised on these forums), but when I set DATEPART(day,FROM_DATE) equal to the following piece of code, I get no results.
CASE DATEDIFF(dd,0,DATEADD(mm,DATEDIFF(mm, 0, FROM_DATE),-1))%7
WHEN 5 THEN DATEADD(dd, -1, DATEADD(mm,DATEDIFF(mm, 0, FROM_DATE),-1)) -- if Saturday subtract one day
WHEN 6 THEN DATEADD(dd, -2, DATEADD(mm,DATEDIFF(mm, 0, FROM_DATE),-1)) -- if Sunday subtract two days
ELSE DATEADD(mm,DATEDIFF(mm, 0, FROM_DATE),-1)
END
hello all..
i want to update my table information with the value which is currently inserted/updated in another table dynamically..how to get the value of a currently inserted single cell in that table..?
table1 contains Refno,.....Refno is primarykey,identity
table 2 contains uploadID,....uploadID is primary key,identity
table3 contains RefNo,UploadID(both r foriegn keys corresponding to table1 & table2)
how to fill table3 with values(not manually) when i am inserting records into table1 n table2 ..( refno and uploadId are identity columns )..Any Idea..?
thanks in Advance
Anne
Hi,
Writing a report that displays total hours, etc for each day in a given month and I'm having trouble comking up w/ an elegant solution. Tables are set up like this:
table1 (id, start_date,end_date,submitter)
table2( id,table1_id,start_time,end_time, etc)
Each record in table2 is a child to a parent record in table1 and there may be multiple children for each parent. The "start_time" and "end_time" fields are datatype "datetime" and are stored with actual times (not 12:00:00 AM"). I need the report to display the values for each day in a gridview, etc so I can act upon them from the "RowDataBound" sub (more math, etc). The problem that I am running into is that for records that have multiple children for a given day, I need to sum those results and display the summed data as a single row within the GV - can't seem to work that out - I keep getting every child record displaying as its own row in the GV.
Any thoughts? I'm sure it's probably fairly simple but I am still a beginner...thanks as always
I have two tables Costtable (Id,ResourceId, Amount,Date) and ResourceTable (ResourceId,Name) which shows output as below.
I want to show 0 amount for rest of the name in case of September. For e.g. if rest of the Resources does not appear in cost table they should appear 0 in amount
My Desired output
My current query
SELECT
RG.Id AS Id,
RG.Name AS Name,
ISNULL(SUM(AC.Amount), 0) AS Amount,
RIGHT(CONVERT(varchar(10), AC.[Date], 105), 7) AS [YearMonth]
[Code] ....
I want to check a table to see what rows have been updated today, then write to a text file some data from the selected rows; then I want to automate this (DTS package? TSQL stored procedure job?) to run every night at midnight. Is the DTS Wizard the best way, that's what I did, but have not confirmed that it is writing a new text file every day, and does each new version write over the old one?
View 1 Replies View RelatedI am pulling data that shows appt information on a patient:
FName,LName, PhoneNumber, ApptDate, ApptTime, and Status that equals Active. I need to pull this info everyday. How can I set this up in a stored procedure to pull all this information automatically on a daily basis where it pulls by Appt Date that is 2 days greater than the current date?
Thanks!
Thanks!
Lisa
I have a cluster hosting multiple GP databases and a second for my data-warehouse I am playing around with (personal project).
I have scripts that pull data from all the DB's to input into the DW's tables(Customers,Reps,Hub....)
An example of my branch script :
select interidas BranchID,
cmpnynamas BranchDesc,
address1as BranchAddressLine1,
address2as BranchAddressLine2,
address3as BranchAddressLine3,
zipcodeas PostalCode
from dynamics..SY01500
Where interid in ('comp1', 'comp2', 'comp4', 'comp5')
what would be the best way to using these scripts pull the data to my testDW and not have duplicate data issues?
I was thinking of using a staging DB on the GP cluster and then building an import data package to run nightly. the issue i had was how do i avoid duplicate data ?
I am looking to pull all records for current & previous calendar year in one query. I know how to pull the current calendar year, but how would I pull current & previous?
select id, list_date
from tableA
where list_date > DATEADD(year,-1,GETDATE())
I am building RDA process between SQL server and SQL server CE. Since when we use the method 'SqlCeRemoteDataAccess.pull()', the data will be pulled down from SQL server to CE server and a new table is created with some addtional columns. As I only intend to pull the data and never push it back to SQL server, if I pull the data down for the second time, there will be an error saying that table is already existing. I wonder whether I can pull the data to an existing table everytime I do the RDA?
View 1 Replies View RelatedSome how reason I don't able to pull the data from table and it's giving me following error..I was using just simple select statement
Msg 605, Level 21, State 3, Line 1'
Attempt to fetch logical page (3:10809) in database 9 failed. It belongs to allocation unit 72057616050421760 not to 72057613925351424.
pulling data from a table in Server A and creating the same table on Server B.
From what I've read you can't export/import or use a wizard as the db is of the type dbo.md_*****.
l want to run my procedure every month,but it must look at the 1st and the last day of the month.So that when l use my where clause l'll
say where 1st and last day between @startdate and @enddate. How do l do that?
collections_hexagon '2002-05-12','2002-05-12'
Alter Procedure Collections_Hexagon
(
@Startdate datetime,
@Enddate datetime
set @Startdate = 1stdayof currentMonth
set @Startdate = lastdayof currentMonth
)
Hi there everbody,
i am trying to get the last day of the Q + 1 month
the first part i have succeeded (dateadd(ms,-3,DATEADD(qq, DATEDIFF(qq,0,getdate() )+1, 0))) ,but how do i add 1 more month ?
would appreciate any suggestion
regards
Yoav
hi,
If today is the 22/4/08
how can I get the day last month,
eg. 22/3/08
?thank you
Hi, Im trying to pull data from 2 fields in the same table into a SqlDataSource that feeds into a GridView, and display them as 1 field in GridView? I have a database table that has entries of users and their friends. so
this tblFriendUser has a column called UserName and another column
called FriendUserName.
I am trying to get a list of friends for that particular user. Note
that if User1 initiated the friend request, he will be listed as
UserName and his friend as FriendUserName, but if his friend initiated
the friend request, it will be vice versa: him being the FriendUserName
and his friend the UserName. So I want the following 2 queries run and merged into
one query in order to return 2 columns only: UserFriendID & UserName, is that
possible? Is my design bad? Any suggestions/advice would help! Thanks a lot!
SELECT UserFriendID, UserName
FROM tblUserFriends
WHERE (UserName = @UserName);
SELECT UserFriendID, FriendUserName AS UserName
FROM tblUserFriends
WHERE (FriendUserName= @UserName);
Hi,I have a simple table called events, which lists the start and end dates of events. I'm using a calendar control that queries the db for events, but at the moment it does a check for every day by passing in the day. (Very inefficient) What I'd like to do is pass in the current month, and get a set of rows that have an event which is in that month. It sounds easy, but I'm a little confused about what to do if the event starts current month -1 and ends currentmonth +1 I obviously need to return results like these also.
View 4 Replies View RelatedI am writing a usage query, I need to determine what the current month and year is. If the current month is 1, then I need Year-1. I keep getting this error Line 5: Incorrect syntax near '='.
If I comment out the case statement just evaluate the (YEAR(User_Date) = YEAR(DATEADD(yy, - 1, GETDATE())))or (YEAR(User_Date) = YEAR(GETDATE())) by itself, the query works. What I am missing? Anybody?1 SELECT CONVERT(char(10), User_Date, 101) AS userdate, COUNT(*) AS CNT, User_Name2 FROM Users3 WHERE (User_Name = 'Joe Bob') AND (MONTH(User_Date) = MONTH(DATEADD(mm, - 1, GETDATE()))) AND 4 case MONTH(User_Date) when 1 then 5 (YEAR(User_Date) = YEAR(DATEADD(yy, - 1, GETDATE())))6 else (YEAR(User_Date) = YEAR(GETDATE()))7 END8 GROUP BY CONVERT(char(10), User_Date, 101), User_Name9 ORDER BY CONVERT(char(10), User_Date, 101), User_Name
I have table 'Open_Months' as shown below
Emp_IdMonthYear
00FBG 42013
I need current month and previous 2 months, for this i have concatinated month and year column into date formate, the query for this as shown below
SELECT cast(CONVERT(datetime, CONVERT(varchar(4), OM_Year) + RIGHT('0' + CONVERT(varchar(2), OM_Month), 2) + '01', 112) AS Datetime) from Open_Months where OM_Emp_ID = '00FBG'
Date
2013-04-01
From the above date I need to find current month and its previous 2 months.
I have a problem with a date in my sql view, I need the records from the 3 last months but without the current month, if I execute my view right now I have the records from January to april but I just need from January to march, I must have always the 3 previous month but I don't know how I can do it
(dbo.frhkrg.fakdat >= DATEADD(MM, - 3, GETDATE()))
how would i take the query and show just the current months unique logins
SELECT DISTINCT YEAR(Login_Time) AS Year, MONTH(Login_Time) AS Month, COUNT(*) AS Login_Cnt
FROM Login
WHERE Login_Time >=#10/1/2005#
GROUP BY YEAR(Login_Time), MONTH(Login_Time)
ORDER BY YEAR(Login_Time), MONTH(Login_Time)
Hi, I'm dabbling in trying to retrieve some info from an SQL database and publish it in Sharepoint data view. I'm trying to create a View in the SQL database that retrieves all records for the current month. So that in July, it automatically shows me July records, and when August ticks over, it automatically displays August's records. I can hard code the dates in to the query no probs (e.g. a statement like ENTRYDATE >= '1/07/2007') but was hoping there is a way to specify current month. So maybe the statement looks like ENTRYDATE >= "CURRENTMONTH".
Thanks in advance!
I am trying to get a query that subtracts a month and a day from current date in SQL Server.
Currently I have SELECT DATEADD("MM", -1,GETDATE()) which subtracts one month from the date but I want to subtract a month and a day from date.
The only way the job success is if I select the option add rows wich is copying all rows even the ones that are already there, I tried to drop amd recreate the table option but i just dosn't run that way, help please..
View 1 Replies View RelatedHi,I was wondering if you guys have any nth script to reads from tableand outputs into a temp table subset of records. There was a nth toolI used to use it was GROUP1 which was written in C and it used to bevery fast on nth -in a flat file. In this program we used to pass fewparamaeters. For example if I want 30,000 records from the file of500,000. The function seams to work something like this. you dividethe 30,000 records of 500,000 which will result with .090909090909.Now we would pass only the first 7 digit (0909090) as parameter thatwould nth the file down to 30,000 records. This function allwaysworked whichever number you use as long as the read file is largerthan output fileI like to use the similar concept in Sql Server and I was wondering ifanyone has any script to do this or how to go about this?Thank you. I appreciate your feedbackagron
View 1 Replies View RelatedI have the following code block
CREATE TABLE #tbl_1 (event_time DATETIME2, SID INT ,NAME VARCHAR(20) )
INSERT INTO #tbl_1 VALUES ('2015-08-27 13:47:24.123','150','abc')
INSERT INTO #tbl_1 VALUES ('2015-09-27 13:47:24.123','149','acb')
INSERT INTO #tbl_1 VALUES ('2015-10-27 13:47:24.123','148','cba')
CREATE TABLE #tbl_2 (event_time DATETIME2, SID INT ,NAME VARCHAR(20) )
INSERT INTO #tbl_2
SELECT * FROM #tbl_1 where ? SELECT * FROM #tbl_2
My requirement is to insert values into #tbl2 that are in current month which are event_time values '2015-08-27'
Here is my query
SELECT id, (CONVERT(datetime, event_date)) AS event_date, xmlfilename, event_active FROM test WHERE (YEAR(event_date) >= YEAR(GETDATE())) AND (MONTH(event_date) >= MONTH(GETDATE())) AND (DAY(event_date) >= DAY(GETDATE())) ORDER BY event_date ASC
The above query shows me event only upcoming event from the current month.
I want to list all the events happening today and future. I do not want to show past event. How to do this?
I have a SSRS report using 2008 R2. It prompts the user for the start and end dates. This all works. But now I want the start date parm to default to the first day of the current month and the end date parm to default to the last day of the current month.In the new query window in SQL Server Management Studio, I can run this chunk of code to get the first day of current month:
SELECT DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()), 0)
And this code to get the last day of current month:
SELECT DATEADD(DAY, -(DAY(DATEADD(MONTH, 1, GETDATE()))),
DATEADD(MONTH, 1, GETDATE()))
But I don't know how to do this in SSRS 2008. How can I make my start / end parms to get these values.
I need to calculate “NET_SALES” and “MARGIN_PERCENT” for each month of the current year … the following returns the same values for each month in the list, which are for the current month. Taking out the GROUP BY line works fine for an overall number.
SALES_MONTH, NET_SALES, MARGIN_PERCENT
January, 1246627.69, 24
February, 1246627.69, 24
March, 1246627.69, 24
-------------------------------------------------
DECLARE @NetSales DECIMAL(18,6)
DECLARE @Cost DECIMAL(18,6)
SELECT
@NetSales = sum(IL.MERCHANDISE+IL.TAX)
,@Cost = sum(IL.COST)
FROM INVOICELINE IL
[Code] .....
I'm trying to create a WHERE statement that will calculate values from our current fiscal year to the last complete month.I'm using code that was created for us that does the calculations for our entire fiscal years. I thought I had fixed the WHERE statement to work like we wanted last year, but it appears to be broken now after trying it again in January and February. I'm guessing my WHERE statement only works for March and up, but how to get it to work for every month. Most attempts I'm trying it's just returning very large and inaccurate values.
I included my WHERE statement below of what I originally had that worked last year. The @BeginYear/Month/etc are retrieved from a different table and @Month is just set to MONTH(GETDATE())-1.
WHERE
(YEAR(SA3.DocumentDate)=@BeginYear AND MONTH(SA3.DocumentDate)>=@BeginMonth AND MONTH(SA3.DocumentDate)<=@Month)
OR
(YEAR(SA3.DocumentDate)=@EndYear AND MONTH(SA3.DocumentDate)<=@EndMonth AND MONTH(SA3.DocumentDate)>=@Month)
I can't seem to upload images so here's the link: [URL] ....
I need to get the last value of # Orders week avg in the current context (the highlighted value). The calendar dimension here is a week level one so I don't think I can use LASTNONBLANK. The measure is from the facts_sales table which is linked to a calendar dimension via a date key.
I need to create a set so that when a user selects a month in filter (say 201506) then it should give me a list of months from 201406 to 201506. Any appropriate MDX query.
View 7 Replies View Related