I am trying to get a query that subtracts a month and a day from current date in SQL Server.
Currently I have SELECT DATEADD("MM", -1,GETDATE()) which subtracts one month from the date but I want to subtract a month and a day from date.
how to write a query to get current date or end of month date if we pass year and month as input
Eg: if today date is 2015-09-29
if we pass year =2015 and month=09 then we have to get 2015-09-29
if we pass year =2015 and month=08 then we have to get 2015-08-31(for previous months we have to get EOMonth date & for current month we have to get current date).
hi,
If today is the 22/4/08
how can I get the day last month,
eg. 22/3/08
?thank you
Hi,I have a simple table called events, which lists the start and end dates of events. I'm using a calendar control that queries the db for events, but at the moment it does a check for every day by passing in the day. (Very inefficient) What I'd like to do is pass in the current month, and get a set of rows that have an event which is in that month. It sounds easy, but I'm a little confused about what to do if the event starts current month -1 and ends currentmonth +1 I obviously need to return results like these also.
View 4 Replies View RelatedI am trying to SUM a column of ActivityDebit with current Calendar_Month to a Column of Trial_Balance_Debit from Last Calendar_Month. I am providing Temp Table code as well as fake data.
=====
IF OBJECT_ID('TempDB..#MyTrialBalance','U') IS NOT NULL
DROP TABLE #MyTrialBalance
CREATE TABLE #MyTrialBalance (
[Trial_Balance_ID] [int] IDENTITY(1,1) PRIMARY KEY CLUSTERED NOT NULL,
[FISCALYEAR] [smallint] NULL,
[Code] ....
Here is my Query I am trying but not working. I cant figure out how to doo the dateadd for correct column.
SELECT A.Trial_Balance_ID,A.ACTIVITYDEBIT --SUM(A.ACTIVITYDEBIT + B.Last_Trail_Balance_Debit) AS New_TB
FROM
(SELECT [Trial_Balance_ID], [Calendar_Month],[ACTIVITYDEBIT]
FROM Mytrialbalance
WHERE actindx='48397' AND ACTIVITYDEBIT='820439.78000'
)A INNER JOIN
(SELECT [Trial_Balance_ID],DATEADD(MM, -1,Calendar_Month)AS Last_Month
FROM Mytrialbalance) B ON B.Trial_Balance_ID=A.Trial_Balance_ID
I have the following code block
CREATE TABLE #tbl_1 (event_time DATETIME2, SID INT ,NAME VARCHAR(20) )
INSERT INTO #tbl_1 VALUES ('2015-08-27 13:47:24.123','150','abc')
INSERT INTO #tbl_1 VALUES ('2015-09-27 13:47:24.123','149','acb')
INSERT INTO #tbl_1 VALUES ('2015-10-27 13:47:24.123','148','cba')
CREATE TABLE #tbl_2 (event_time DATETIME2, SID INT ,NAME VARCHAR(20) )
INSERT INTO #tbl_2
SELECT * FROM #tbl_1 where ? SELECT * FROM #tbl_2
My requirement is to insert values into #tbl2 that are in current month which are event_time values '2015-08-27'
I need to get previous month data in the table based on current date.
In case of execution of each month, the data for previous month should come with date as between
create table TestDate
(Sno Int,
Name varchar(100),
DateofJoin datetime)
insert into TestDate values (1,'Raj', '2/21/2014')
insert into TestDate values (1,'Britto', '6/12/2014')
insert into TestDate values (1,'Kumar', '5/14/2014')
insert into TestDate values (1,'Selva', '6/27/2014')
insert into TestDate values (1,'Ravi', '5/2/2014')
insert into TestDate values (1,'Gopu', '6/2/2014')
/*
if I execute in month July ( ie: today)
select * from TestDate where dateofjoin between 1-june-2014 and 30-june-2014
Result
5 Ravi 2014-05-02 00:00:00.000
3 Kumar 2014-05-14 00:00:00.000
if I execute in month June
select * from TestDate where dateofjoin between 1-may-2014 and 30-may-2014
Result
6Gopu2014-06-02 00:00:00.000
2Britto2014-06-12 00:00:00.000
4Selva2014-06-27 00:00:00.000
/*
I have a SSRS report using 2008 R2. It prompts the user for the start and end dates. This all works. But now I want the start date parm to default to the first day of the current month and the end date parm to default to the last day of the current month.In the new query window in SQL Server Management Studio, I can run this chunk of code to get the first day of current month:
SELECT DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()), 0)
And this code to get the last day of current month:
SELECT DATEADD(DAY, -(DAY(DATEADD(MONTH, 1, GETDATE()))),
DATEADD(MONTH, 1, GETDATE()))
But I don't know how to do this in SSRS 2008. How can I make my start / end parms to get these values.
I can't seem to upload images so here's the link: [URL] ....
I need to get the last value of # Orders week avg in the current context (the highlighted value). The calendar dimension here is a week level one so I don't think I can use LASTNONBLANK. The measure is from the facts_sales table which is linked to a calendar dimension via a date key.
I am trying to use one dataset rather than two and was hoping to then filter the data via a table or matrix.
This is my dataset
SELECT
Practice.ibvStaffCategorisation.StaffId
,SUM(Practice.ibvStaffTotalsCL2Y.ChargeableMinutes) AS Sum_ChargeableMinutes
,SUM(Practice.ibvStaffTotalsCL2Y.NonChargeableMinutes) AS Sum_NonChargeableMinutes
,SUM(Practice.ibvStaffTotalsCL2Y.ChargeableAmount) AS Sum_ChargeableAmount
,SUM(Practice.ibvStaffTotalsCL2Y.NonChargeableAmount) AS Sum_NonChargeableAmount
,Practice.ibvStaffTotalsCL2Y.Period
[code]....
I would like to display two rows of data for each StaffId one representing the current period and the other all periods to date so the table would look something like below.
StaffId | Non Chargeable Time | Chargeable Time
CJJ | 0:20 | 4:20
| 4:50 | 19:20
JN | 0:05 | 5:30
| 1:30 | 25:30
The above shows two separate StaffId figures the first line for each shows non chargeable and chargeable for the current period and the second line a total of all periods in that year.
I have managed to get the first row to display only figures from the current period by using a filter however it also applies the same filter to the second row in the group. I have also tried to group the rows but am drawing a blank.
How to show the CurrentMonthanddateandyear in my report header in ssrs?
1.How to show the currentdateandMonthyear exmple date format like June 29 2015 on my report header.
2.How to change the report rdl name with the same name like EmpUpdatedreportJune 29 2015.rdl ,it is possible to create and change the rdl file name with the current dateandmonth.
I have a the following date variables that's being set around the current date. how to adjust it to work around a date variable @Date instead of the current date? Lets the @Date = 2015-06-30 then the it would adjust the variable below accordingly. I'm assuming the getdate()) needs to be replaced with @Date but I can't seem to get it to work.
Declare @EndOfLMPriorYear Date = DateAdd(yyyy,-1,EOMONTH(Dateadd(Month,Datediff(Month,0,getdate())-1,0)))
Declare @EndOfPriorMonth Date = EOMONTH(Dateadd(Month,Datediff(Month,0,getdate())-2,0))
DECLARE @EndOfLastMonth Date = EOMONTH(Dateadd(Month,Datediff(Month,0,getdate())-1,0))
I have the following requirement I need to extract all records for min or max date between the 1 and 10th of every month, the following query works but I find some dates that are not in the range specified.
Select
[EventType],ItemName,FORMAT([TimeLastModified],'MM')asFromMonthValue,
FORMAT([TimeLastModified],'MM')asToMonthValue,
FORMAT([TimeLastModified],'MMM')asFromMonthLabel,
FORMAT([TimeLastModified],'MMM')asToMonthLabel,
min([TimeLastModified])asMinDate,max([TimeLastModified])asMaxDate,ModifiedBy,Casewhen[EventLog].EventType=1
Then
'Item Added'
[Code] .....
I have a filed named 'date'. I convert this into 101 format. Now I want to sort that date by year not by month.
View 12 Replies View RelatedI have a query for which in the where clause i use where Year(openDate) = Year(GETDATE()) and Month(OpenDate) = Month(GETDATE())-1 which would give me the data i needed for this year last month. However if i run this query on Jan 2015 or Jan 2016, this query would fail.
how to modify my where clause so that it runs regardless of even if its Jan ?
My goal is to select values from the same date range for a month on month view to compare values month over month. I've tried using the date trunc function but I'm not sure what the best way to attack this is. My thoughts are I need to somehow select first day of every month + interval 'x days' (but I don't know the syntax).In other words, I want to see
Select
Jan 1- 23rd
feb 1-23rd
march 1-23rd
april 1-23rd
,value
from
table
I have a table that records a GL period as a string. I want to convert this value to the last date in the month.
GlPeriodID
APR 2015
I want to convert to
4/30/2015
I have a column which stores a set of dates. I want to tell how many days left of a date till it’s month end. It should be noted that month ends are taken from the date series, not a calendar month end.
Something like below,
DateTD Days left
2009-01-05 14
2009-01-06 13
2009-01-07 12
2009-01-08 11
2009-01-09 10
2009-01-12 9
2009-01-13 8
2009-01-14 7
2009-01-15 6
2009-01-16 5
2009-01-19 4
2009-01-20 3
2009-01-21 2
2009-01-22 1
2009-01-23 0
2009-02-02 /
2009-02-03 /
I am trying to query a code where i need to loop a month in a specified date range. Inside the loop I need to return a result of data each month and need to update the table of the returned data. How do I do the update a field inside the loop? Here's my query:
declare @table1 table (
YEAR_EFF int,
MONTH_EFF int,
IDNumber (8),
SUBS_CNT smallint,
MEM_CNT smallint)
declare @StartDate datetime,
[code]....
Others says I need to use exec sp_executesql N'' but how do I use it using my code above?
I need to recognize only one month in a date range e to make a proportion of the quantity. Practically, period 31-08-2015 - 30-09-2015 is 31 days, 1 belonging August and 30 belonging September so 3.2258% of the quantity must belong August and 96.7742% September. The quantity 200, so 193.54 belong September (That's what I need to achieve). Range 01-09-2015 / 30-09-2015 Qty 500, all 500 belong September.
Range 01-07-2015 / 20-08-2015 Qty 2500 0 belong September. A little bit more complicated if I got 25-06-2015 / 16-12-2015. it 30 day for September and with a datediff I can count the days and make a proportion. I can write piece by piece the code but I'd prefer of course to have only one query for this.
The DDL:
create table forum (idd int, byfrom date, byto date, qty int)
insert into forum values
(1,'2015-06-15','2015-08-18',300),(2,'2015-09-16','2015-10-04',400),(3,'2015-07-28','2015-09-27',1000),
(4,'2015-09-01','2015-09-30',500),(5,'2015-09-03','2015-09-03',300),(6,'2015-08-02','2015-09-02',100),
(7,'2015-07-01','2015-07-30',500),(8,'2015-06-03','2015-12-08',500),(9,'2015-09-01','2015-09-30',500),
(10,'2015-08-04','2015-09-04',300)
I am working with a SQL Server database that was set up to store the year, month, and day in separate columns, rather than use a single column for the date. I plan to change this so that we store dates and times using the datetime data type. Until then, for now, I need to write transact-SQL select statements to concatenate the year, month and day to create a date that can be displayed in the results window in the format yyyy/mm/dd.
I can't seem to find any built-in function in SQL Server that will let me do this. Of course, using Excel or Access, I can use the DATE() function to reconstruct the date into yyyy/mm/dd. Is there a way to reconstruct the date into yyyy/mm/dd in SQL Server?
I have a dynamic sql query where in I am comparing two tables and loading data for last 15 days. e.g today 2050921 then I am going to load till 20150906.
I pass on 2 variables @currentdate and @currentdate-1 to the query which are in date format 'yyyymmdd'
I need to do this for last 15 days how do I do this using while loop.
Note my date format is YYYYMMDD.
DECLARE @SQL VARCHAR(MAX)
@sql = ' insert into target
select from table_1_currentdate a
LEFT JOIN Table_2_currentdate-1 b
on a.col1=b.col1 where b.col1 is null '
exec(@sql)
I have to use while loop and decrement it every time and load data for last 15 days comparing two tables. I tried so many times I am not getting it right .
I've written sql code which takes a date and finds the Last Day of the Month one year ago. For example, it takes the date '2015-04-17' and returns the date '2014-04-30'. The code works fine in a query. Now I'm trying to turn this into a function. However, when I try to create the function I get the error:
Operand type clash: date is incompatible with int
Why is this error being returned?
Here is my function:
CREATE FUNCTION dbo.zEOM_LY_D(@Input Date)
RETURNS date
AS
BEGIN;
DECLARE @Result date;
SET @Result = convert(DATE, DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,dateadd(m, -11, @Input)+1),0)),101)
RETURN @Result;
END;
This seems to get the job done...
SELECTRIGHT('00000000'+CONVERT(VARCHAR,REPLACE(CONVERT(VARCHAR,GETDATE(),101),'/','')),8)
However, when I try to create it and CONVERT it to a DECIMAL, it then loses the "0"
SELECTCONVERT(DECIMAL(8,0),RIGHT('00000000'+CONVERT(VARCHAR,REPLACE(CONVERT(VARCHAR,GETDATE(),101),'/','')),8))
Is it impossible to convert it to a decimal and retain the leading "0" on the month?
My vendor's spec states..."Business Date Numeric For 8 positions MMDDYYYY"
Let's say if the date is 01/01/2015 till 01/01/2016
I want split these dates monthly format wise and then use them in variable in cursors to loop
For an example Monthly date should be 01/01/2015 and 01/31/2015 and use these two values in 2 variables and make a loop until it never ends whole date range which is 01/01/2016
I have two tables Costtable (Id,ResourceId, Amount,Date) and ResourceTable (ResourceId,Name) which shows output as below.
I want to show 0 amount for rest of the name in case of September. For e.g. if rest of the Resources does not appear in cost table they should appear 0 in amount
My Desired output
My current query
SELECT
RG.Id AS Id,
RG.Name AS Name,
ISNULL(SUM(AC.Amount), 0) AS Amount,
RIGHT(CONVERT(varchar(10), AC.[Date], 105), 7) AS [YearMonth]
[Code] ....
Most of the data is in one table.
Company 1-Jan 1-Feb 1-Mar 1-Apr
RSP RSP RSP RSP
NON-RELO $295 1 $0 0 $1,400 7 $0 0 $1,195 4 $0 0 $4,700 8 $0 0
AMERICAN ESCROW & CL//AECC $2,650 4 $0 0 $3,720 8 $0 0 $2,339 4 $0 0 $2,460 2 $0 0
American Internation//AIRCO $9,131 30 $2,340 9 $10,927 35 $2,340 9 $9,142 31 $2,600 10 $18,406 54 $3,900 15
American Internation//AIR $20,611 63 $1,820 8 $23,892 75 $1,040 4 $35,038 111 $3,120 12 $3,778 16 $1,560 6
American Internation//Ab $64,248 206 $6,240 24 $59,800 187 $5,200 20 $87,115 264
I did something similar doing just record counts but this is far more complicated. I'm at a loss that this is even possible.
SUM(CASE datepart(month, tbFile.openedDate) WHEN 1 THEN 1 ELSE 0 END) AS 'January',
Hello. How do I increment or decrement a date by adding/subtracting days? For example I want to add 4 days to the date today. I should get 07/31/2005 since today is 07/27/2005. And if I add 5 days then I should get 08/01/2005. Thank you.
View 5 Replies View RelatedHi,
I'm making some sort of application where people can add their resume.
They also need something to add places where they have worked or currently are working.
I have a form where they can add this and i add this experience using the following stored procedure:
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create procedure [dbo].[sp_Insert_Experience]
@ExperienceId uniqueidentifier,
@ExperienceEmployee nvarchar(100),
@ExperienceFrom datetime,
@ExperienceUntil datetime,
@ExperienceQualifications nvarchar(250),
@ExperienceTechnologies nvarchar(250),
@ExperienceTasks nvarchar(250)
as
insert into Experiences
values(@ExperienceId,@ExperienceEmployee,@ExperienceFrom,@ExperienceUntil,@ExperienceQualifications,
@ExperienceTechnologies,@ExperienceTasks);
It must be possible to add the place where they currently are working. Then the ExperienceUntil has to be something like still going on. Then I decided that the user then had to set the current date.
But what I want is the following, I want that the ExperienceUntil keeps updating automatically, like everytime i get that record, it has to have current date.
Is this possible ?
But if the ExperienceUntil isn't the current date , it just had to take the supplied parameter date.
l want to run my procedure every month,but it must look at the 1st and the last day of the month.So that when l use my where clause l'll
say where 1st and last day between @startdate and @enddate. How do l do that?
collections_hexagon '2002-05-12','2002-05-12'
Alter Procedure Collections_Hexagon
(
@Startdate datetime,
@Enddate datetime
set @Startdate = 1stdayof currentMonth
set @Startdate = lastdayof currentMonth
)
I've this query
SELECT
t1.ID, t1.Date, t1.Time,
t1.VALUE
FROM RESULT WHERE t1.Date>=CONVERT(VARCHAR(10),DATEADD(d,-7,GETDATE()),101) AND
t1.Date<CONVERT(VARCHAR(10), GETDATE(), 101)
Let's say, current date is 8 AUG 2005 and current time is 2045
So, i will get
ID | Date (this is datetime) | Time (this is integer) | Value
--------------------------------------------------
204 | 8/1/2005| 2359 | 90
205 | 8/1/2005| 2250 | 99
206 | 8/1/2005| 1950 | 88
...
...
207 | 8/7/2005| 1845 | 77
208 | 8/7/2005| 2255 | 77
209 | 8/7/2005| 2140 | 77
Can someone can show me to filter data between
t1.Date>=CONVERT(VARCHAR(10),DATEADD(d,-7,GETDATE()),101) AND TIME>=CurrentTime
t1.Date<CONVERT(VARCHAR(10), GETDATE(), 101) AND TIME<=CurrentTime
If current date is 8 AUG 2005 and current time is 2045, so the result shown as follow
ID | Date (this is datetime) | Time (this is integer) | Value
--------------------------------------------------
204 | 8/1/2005| 2359 | 90
205 | 8/1/2005| 2250 | 99
...
...
207 | 8/7/2005| 1845 | 77
I only have this query,
SELECT
t1.ID, t1.Date, t1.Time,
t1.VALUE
FROM RESULT WHERE t1.Date>=CONVERT(VARCHAR(10),DATEADD(d,-7,GETDATE()),101) AND
t1.Date<CONVERT(VARCHAR(10), GETDATE(), 101)
lack of idea to put the TIME condition.
Plz help me..
Hi there everbody,
i am trying to get the last day of the Q + 1 month
the first part i have succeeded (dateadd(ms,-3,DATEADD(qq, DATEDIFF(qq,0,getdate() )+1, 0))) ,but how do i add 1 more month ?
would appreciate any suggestion
regards
Yoav
I am writing a usage query, I need to determine what the current month and year is. If the current month is 1, then I need Year-1. I keep getting this error Line 5: Incorrect syntax near '='.
If I comment out the case statement just evaluate the (YEAR(User_Date) = YEAR(DATEADD(yy, - 1, GETDATE())))or (YEAR(User_Date) = YEAR(GETDATE())) by itself, the query works. What I am missing? Anybody?1 SELECT CONVERT(char(10), User_Date, 101) AS userdate, COUNT(*) AS CNT, User_Name2 FROM Users3 WHERE (User_Name = 'Joe Bob') AND (MONTH(User_Date) = MONTH(DATEADD(mm, - 1, GETDATE()))) AND 4 case MONTH(User_Date) when 1 then 5 (YEAR(User_Date) = YEAR(DATEADD(yy, - 1, GETDATE())))6 else (YEAR(User_Date) = YEAR(GETDATE()))7 END8 GROUP BY CONVERT(char(10), User_Date, 101), User_Name9 ORDER BY CONVERT(char(10), User_Date, 101), User_Name