Transact SQL :: Number Of Days Between A Date And Its Month End
Sep 23, 2015
I have a column which stores a set of dates. I want to tell how many days left of a date till it’s month end. It should be noted that month ends are taken from the date series, not a calendar month end.
Something like below,
DateTD Days left
2009-01-05 14
2009-01-06 13
2009-01-07 12
2009-01-08 11
2009-01-09 10
2009-01-12 9
2009-01-13 8
2009-01-14 7
2009-01-15 6
2009-01-16 5
2009-01-19 4
2009-01-20 3
2009-01-21 2
2009-01-22 1
2009-01-23 0
2009-02-02 /
2009-02-03 /
View 28 Replies
ADVERTISEMENT
Aug 26, 2015
I want to show this kind of output
UserID UserName 1 2 3 30
OR
UserID UserName 1 2 3 31
user data saved in db select distinct UserID,Name from Userss Where IsActive=1 and order by UserID and i want to just calculate no of days in month based on year and month name supplied by user. one way i can do it. first i will create a temporary table and in loop add many columns to that table and later dump user data to specific column.
View 10 Replies
View Related
Jul 20, 2005
DECLARE @varDate datetimeDECLARE @varMonthDate datetimeDECLARE @varYear datetimeDECLARE @varFOM varchar(10)DECLARE @NumDaysInMonth as intselect @varDate = '2/1/2004'select @varMonthDate = MONTH(@varDate)select @varYear = YEAR(@varDate)select @varFOM = CAST(CAST(@varMonthDate as int) as varchar) + '/1/' +CAST(CAST(@varYear as int) as varchar)select @NumDaysInMonth = DATEDIFF (day,@varFOM,DATEADD(mm,1,@varFOM))select @NumDaysInMonth as DaysInMonth
View 1 Replies
View Related
Apr 11, 2008
I have a query that counts the number of pay checks received in a month, but I need to compare that to the number of actual paydays in a month. If we were on a set pay schedule (i.e. the 15th of each month) it would be easy. Unfortunately that's not the case. We are paid biweekly on Fridays and our last pay day was April 4th.
So I need to know how many pay periods were in a specified month. For example, April would have 2 (April 4th and 18th), May would have 3 (May 2nd, 16th, and 30th), etc.
As always, your help is very much appreciated!
View 10 Replies
View Related
Mar 28, 2000
I am trying to determine the amount of days in a month to prorate a month end estimate.
We measure service calls and need to approximate how many we will have at month end.
I would like to automate a query to post on our web and need to know how many days are in the current month.
A possible solution would be to piece together a datetime variable using getdate and dateadd then use a datepart.
However , I don't know how to create a datetime variable this way.
Thanks in advance
View 1 Replies
View Related
Sep 4, 2007
Hi 2 all,
I need to calculate the number of working days in a month. In clear, i need to ignore saturday.sunday and holiday in a month.
can anyone say the solution?
thanks.
View 2 Replies
View Related
Jun 29, 2015
I have 3 month of record in my table. if i pass 2 and 10, i need to select the record of between 2 and 10 days of record of every month. if i pass 10 and 20, it should select the record between 10 and 20 of every month. How to query for that?
View 8 Replies
View Related
Oct 17, 2015
I need a simple query to display all the days of a given month and year
View 2 Replies
View Related
May 13, 2015
I want to find the first weekend day, second weekend day, third weekend day and fourth weekend day per month using sql query. This is getting from recurring appointment. If weekdays = 65 means it accepts only saturday and sunday. So I want first, second, third and fourth weekend days for a month using query in sql server 2008...
View 17 Replies
View Related
Nov 19, 2015
I want to find out count of same UserID used within 7 days for that month.
For example, in below scenario, UserID 458's 1st TTo is 8/26/2015 and it used again on 8/28/2015 which is less than 7 so result should be 1. (DateDiff between 1st TTo and 2nd Tfrom should be less than 7) This is for month of Aug.
ID TFrom TTo
9876 8/1/2015 8/7/2015
4140 8/21/2015 9/4/2015
458 8/23/2015 8/26/2015
458 8/28/2015 9/8/2015
Scenario 2,for UserId 458, TTo is 9/20 and it used again Tfrom on 9/20 so result should be 1
user ID TFrom T To
592 9/1/2015 9/24/2015
526 9/3/2015 9/11/2015
292 9/11/2015 9/25/2015
352 9/12/2015 9/24/2015
458 9/14/2015 9/20/2015
458 9/20/2015 10/2/2015
706 9/22/2015 10/6/2015
View 5 Replies
View Related
Mar 31, 2008
I am using oracle 10G DB as back end.I have two date fields in a table.
1)premium_paying_start_date
2)premium_paying_end_date
i have to get the premium_term i.e, the difference between the two dates(premium_paying_end_date-premium_paying_start_date).
The difference should show the year,month and no of days difference.
For example :
premium_paying_start_date : 14-10-1984
premium_paying_end_date : 01-03-2008
Difference should be : 23 Y : 4 M : 15 D (Y = years, M = months , D= days)
So please give me the solution for this.
View 6 Replies
View Related
Mar 18, 2014
I have a query to run a report where the results has a column named “Due Date” which holds a date value based on the project submission date.Now, I need to add 4 columns named, “45 Days Expectant”, “30 Days Overdue”, “60 Days Overdue” and “90 Days Overdue”.I need to do a calculation based on the “Due Date” and “System (I mean default computer date) Date” that if “System Date” is 45 days+ to “Due Date” than put “Yes” in “45 Days Expectant” row.
Also, if “Due Date” is less than or equal to system date by 30 days, put “Yes” in “30 Days Overdue” and same for the 60 and 90 days.how to write this Case Statement? I have some answers how to do it in SSRS (Report Designer) but I want to get the results using T-SQl.
View 2 Replies
View Related
Sep 22, 2006
I need help with creating a query that compares the current date with a stored date field. If the difference between the two dates is greater or equal to 5 days for example, I need to be able to return these records. I am not sure if this can be done through a query alone but any help and suggestions would greatly be appreciated. Thanks in advance.
View 4 Replies
View Related
May 8, 2015
I am new to sql server query. I am trying to write a query for an application and I want user to enter number of over due days for payment.Below is my query and I am getting an error: An expression of non-boolean type specified in a context where a condition is expected, near 'Group'.
SELECT (P.FirstName+', '+P.LastName) As PA, Px.PRespDate,Px.DateFrom
WHERE Px.Hide = 0 AND Px.Total <> Px.Payments AND Px.PRespDate IS NOT NULL AND PE.Hide = 0 AND PE.BillReady = 1
AND DATEDIFF(DAY, Px.DateFrom, PRespDate) LIKE 'Enter # of days |%% '
Group By (P.FirstName+', '+P.LastName), Px.PRespDate,Px.DateFrom
View 2 Replies
View Related
Oct 28, 2015
i have written a sql function which returns only number of working days (excludes holidays and Weekends) between given StartDate and EndDate.
USE [XXX]
GO
/****** Object: UserDefinedFunction [dbo].[CalculateNumberOFWorkDays] Script Date: 10/28/2015 10:20:25 AM ******/
SET ANSI_NULLS ON
GO
[code]...
I need a function or stored procedure which will return the date which is 15 working days (should exclude holidays and Weekends) prior to the given future Date? the future date should be passed as a parameter to this function or stored procedure to return the date. Example scenario: If i give date as 12/01/2015, my function or stored procedure should return the date which is 15 working days (should exclude holidays and Weekends) prior to the given date i.e 12/01/2015...In my application i have a table tblMasHolidayList where all the 2015 year holidays dates and info are stored.
View 18 Replies
View Related
Aug 7, 2015
We have a stored procedure which currently accepts the following parameter: exec dbo.PurgeOldData <'yyyy-mm-dd'...We want to schedule this sp to run once a (first day of the month) going back to say today's date (or the date when this sp is called to run) minus 365 or purging 12 months data. Basically, the function should convert the today's date minus xxx number of days to yyyy-mm-dd so that the sp accept it as the correct parameter and purges the data successfully. So, if the sp is run on 2015-08-06, it will purge data going back to 2014-08-06 or earlier with the following parameter:
exec dbo.PurgeOldData <'2014-08-06'>
which means, all the data prior to the above date will be purged. Even the sp was run on 2015-08-06, the converted value of 2014-08-06' is entered as the sp parameter.
View 3 Replies
View Related
May 6, 2015
I am currently working on a T-Sql query(Sql server 2008) to calculate total no of days between date ranges by year
Table:
Start Date End Date
01/01/2013 04/30/2014
11/01/2014 05/31/2015
06/01/2015 12/31/2015
My expected result.
2013 - 365
2014 - 181
2015 - 365
Note:
Date range can span b/w multiple years
Date ranges will not overlap
I just want the total number of days covered by the range for each year.
Is there any simple way to do this calculation.
View 9 Replies
View Related
May 24, 2015
SQL express 2012. I am trying to case in the where part and having a syntax errors - This is what i am trying to do:
select all the days in week number x including last year if necessary... so if the year start not at the beginning of the week then look in last year as well ( for the same week number of this year and last week nu of last year)
declare
@yyyy int = 2014,-- THE YEAR
@mm int = 1,-- THE MONTH
@week1No int = 1,-- THE WEEK NUMBER IN THE YEAR
@week2No int = 37-- THE last WEEK NUMBER IN last YEAR
select count(tblDay.start)-- tblDay.start IS smallDatetime
[Code] ....
View 2 Replies
View Related
May 24, 2015
SQL express 2012
I am trying to case in the where part and having a syntax errors - this is what i am trying to do:
Select all the days in week number x including last year if necessary... so if the year start not at the beginning of the week then look in last year as well ( for the same week number of this year and last week nu of last year)
declare
@yyyy int = 2014,-- THE YEAR
@mm int = 1,-- THE MONTH
@week1No int = 1,-- THE WEEK NUMBER IN THE YEAR
@week2No int = 37-- THE last WEEK NUMBER IN last YEAR
select count(tblDay.start)-- tblDay.start IS smallDatetime
[Code] ...
View 2 Replies
View Related
Sep 15, 2014
--From the rows I want to know how many number of days a person was active for the given date range.
create table [dbo].[personstatus]
(
id int identity(1,1),
name varchar(100),
DateAdded date,
InactivationDate date ) ;
insert into [dbo].[personstatus] values
[Code] ....
--The output I am looking for.
/*
1) FromDt = '2014-01-01' ToDt ='2014-01-30'
KRISS = 7
VDENTI = 7 days
2) FromDt = '2013-01-01' ToDt ='2014-01-01'
KRISS = 1
VDENTI = 1 days
3) FromDt = '2013-01-01' ToDt ='2014-01-01'
KRISS = 0
VDENTI = 1 days
4) FromDt = '2013-01-01' ToDt ='2014-12-31'
KRISS = 8+24+8+21 = 61 Days
VDENTI = 31+24+31+30 = 116 Days
*/
View 9 Replies
View Related
Jun 17, 2015
I have a table which has name,Speciality,start date and end date. So each person may have 1/more rows .They will have more if they change their specialities. For example if you look at the data below.
AdjusterNameSpecialtyDatestartDateEnd
Test Inside Property2009-08-29 2010-07-31
Test Management2010-08-012012-07-31
If we see at the data above Test has 2 rows because he changed his specialty in the middle.My requirement is to calculate the total number of employees in each month for last 2 years in each speciality. For example if we look at the example above, Test was in Inside property from 2009 Aug to 2010 Aug but if i use just the date start and take the month for each adjuster it gives me the number of adjusters started in that year and month but what i want is Test should be counted in all the months for Inside property until 2010 07 month. Which means i want to have the total number of adjusters present by each speciality for each month of last 2 years .
View 2 Replies
View Related
Sep 29, 2015
how to write a query to get current date or end of month date if we pass year and month as input
Eg: if today date is 2015-09-29
if we pass year =2015 and month=09 then we have to get 2015-09-29
if we pass year =2015 and month=08 then we have to get 2015-08-31(for previous months we have to get EOMonth date & for current month we have to get current date).
View 3 Replies
View Related
Dec 3, 2013
I need to associate aggregate gross_revenue with calendar year, but do not have a date field that reflects payment dates, just contract periods a start_date and an end_date. The contract periods are typically 1 or 2 years and can start at any time I.e start_date 6/1/2012, end date 5/31/13. I think by finding the number of days that fall in each calendar year and storing in a temp table, I can create a simple formula to associate revenue to each year.
View 2 Replies
View Related
May 6, 2008
Hi,
I need to calculate the number of working days from a date backwards. For example 2 working days before Thursday would be the Tuesday (as a basic example)
I use the following code and a Calendar table to calculate the working days from a date but can anyone help with reworking this query to do the reverse
declare @WorkingDate as datetime
SELECT @WorkingDate=dt
FROM tblCalendar AS c
WHERE (@WorkingDays =
(SELECT COUNT(*) AS Expr1
FROM tblCalendar AS c2
WHERE (dt >= @StartDate) AND (dt <= c.dt) AND (IsWeekday = 1) AND (IsHoliday = 0))) AND (IsWeekday = 1)
AND (IsHoliday = 0)
-- Return the result of the function
RETURN convert(varchar(12),@WorkingDate,106)
Hope someone can help
Thanks
View 3 Replies
View Related
Apr 16, 2015
I'm trying to calculate the time difference between a date field and today's date in days. The date field is not mandatory and can therefore be blank. I'm trying to execute the following query:
SELECT employee_code, Civil_ID, DATEDIFF(Day, Civil_ID, GETDATE())
FROM ODEV_VIEW_Credentials_Expiry_Dates
WHERE Civil_ID IS NOT NULL AND Civil_ID != ''
ORDER BY employee_code
I keep getting the following message:
The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
Warning: Null value is eliminated by an aggregate or other SET operation.
No matter what filter I use to process non-blank dates, it never works.
View 12 Replies
View Related
May 21, 2015
declare @siva1 datetime;
declare @siva2 datetime;
set @siva1='2014-03-10 05:02:11'
set @siva2='2014-03-12 23:52:11'
i want output like this 2.18 means 2day 18hours difference how using query
View 6 Replies
View Related
Sep 8, 2015
I need to run a select on Mondays to pull data for 7 days prior to the Thursday of last week; i.e. Friday - Thursday inclusive. I'm sure this is simple, but I work with dates so infrequently that I need a refressher.
View 7 Replies
View Related
Feb 2, 2014
I have already created a table name 'tblHolidays' and populated with 2014 Holidays. What I would like is be able to calculate (subtract or add) number of days from a date. For example subtract 2 days from 07/08/2014 and function should return 07/03/2014.
CREATE FUNCTION [dbo].[ElapsedBDays] (@Start smalldatetime, @End smalldatetime)
RETURNS int
AS
BEGIN
/*
Description:
Function designed to calculate the number of business days (In hours) between two dates.
[Code] ......
View 4 Replies
View Related
Oct 14, 2015
Here I have 2 Dates. CreatedDttm & ModifiedDttm.
I want - DATEDIFF(Day,CreatedDttm,ModifiedDttm) and I have to exclude the Weekend days from that query result.
View 10 Replies
View Related
Sep 10, 2015
I have a calendar table against entire year 2015 with each day with 2 flag,
1. WK_DT_IN == except Satarday and Sunday, value is "Y", for Sat/Sun, value is "N"
2. HOL_DT_IN == value will only be "Y" only for holiday, example for '2015-01-01' date, it's value is "Y"
DECLARE @CAL TABLE (CAL_DT DATE, WK_DT_IN CHAR(1), HOL_DT_IN CHAR(1))
INSERT INTO @CAL VALUES ('2015-01-01', 'Y', 'Y'), ('2015-01-02', 'Y', 'N'),('2015-01-03', 'N', 'N'),
('2015-01-04', 'N', 'N'), ('2015-01-05', 'Y', 'N'), ('2015-01-06', 'Y', 'N'), ('2015-01-07', 'Y', 'N')
We have a given date, example '2015-01-01', I need to find out a date after 2 business days? I can think of loop, but will it work.
I need to exclude date which having HOL_DT_IN = "Y" and WK_DT_IN = "N".
View 3 Replies
View Related
Nov 12, 2015
I have the following requirement I need to extract all records for min or max date between the 1 and 10th of every month, the following query works but I find some dates that are not in the range specified.
Select
[EventType],ItemName,FORMAT([TimeLastModified],'MM')asFromMonthValue,
FORMAT([TimeLastModified],'MM')asToMonthValue,
FORMAT([TimeLastModified],'MMM')asFromMonthLabel,
FORMAT([TimeLastModified],'MMM')asToMonthLabel,
min([TimeLastModified])asMinDate,max([TimeLastModified])asMaxDate,ModifiedBy,Casewhen[EventLog].EventType=1
Then
'Item Added'
[Code] .....
View 5 Replies
View Related
Jun 9, 2015
I have a filed named 'date'. I convert this into 101 format. Now I want to sort that date by year not by month.
View 12 Replies
View Related
Jun 3, 2015
I have a query for which in the where clause i use where Year(openDate) = Year(GETDATE()) and Month(OpenDate) = Month(GETDATE())-1 which would give me the data i needed for this year last month. However if i run this query on Jan 2015 or Jan 2016, this query would fail.
how to modify my where clause so that it runs regardless of even if its Jan ?
View 6 Replies
View Related
