How To Use BETWEEN With Custom-ordered Values
Jul 23, 2005
We have a 10 digit primary key value in this format: M000123456. The
order for this key is first determined by positions 3 and 4 in this
example, then positions 1 and 2. So a brief sample of correct ordering
would look like this:
M000001501
M000011501
M000021501
M000001601
M000011601
M000021601
Now my question: how can I use a BETWEEN (or > and <) in my WHERE
clause to get a range of values for this column? I use the following
ORDER BY clause to control how the results are sorted, but I can't get
the same logic to work with BETWEEN in a WHERE clause.
ORDER BY SUBSTRING(<fieldname>, 7, 2), SUBSTRING (<fieldname>, 5, 2)
How do I return values between M000011501 and M000011601 for example?
View 3 Replies
ADVERTISEMENT
May 8, 2008
Hi,
I have a table called emp, having 2 field name & sex
values are:
name sex
a 1
b 2
c 1
now i want to display the values in above table as like below...
name sex
a Male
b Female
c Male
How to do that...?
View 11 Replies
View Related
Apr 21, 2006
I'd like to be able to hold onto lineageIDs in a list in the custom property of an output object. I found that I can really only easily use an array which is fine but now that I have coded it I cannot set any of the array values programatically. I can't even initialize the array the way I want it. I also cannot change the value in the debugger, it just pops back to zero.
Am I missing something? Here's how I'm trying to do it:
IDTSCustomProperty90 linIDsProperty = output.CustomPropertyCollection.New();
linIDsProperty.Name = "KeyColumnLineageIDs";
linIDsProperty.Value = new int[MAX_KEY_COLS];
for (int i = 0; i < ((int[])linIDsProperty.Value).Length; ++i)
((int[])linIDsProperty.Value)[i] = -1;
(please ignore the \ around the [i], the forum changes [i] into for some reason)
Thanks
Charlie.
View 4 Replies
View Related
May 2, 2008
Hi Folks,
I have a task I wrote which does not always update the property value (as seen in the properties pane)
Basically, change something on the form, then update the task host property with:
this.taskHostValue.Properties["Duration"].SetValue(this.taskHostValue, Convert.ToInt32(spnDuration.Value));
Stepping through this, it does exactly what it is supposed to. Having a look at the property value, it confirms it has changed.
Reopening the UI and resetting all the controls returns the expected results.
The package however does not realise it has changed. There is no * next to the package name in the top tabs.
As long as the package thinks it is unchanged, SaveXML does not get called either so the tasks do not persist.
Changing the value on the properties pane works fine though.
The frustrating thing is this is slightly random. Slight in the sense that sometimes it works but most of the time it does not.
The sample code I used was the MS download IncrementTask (Which works BTW) so I can't see it as being a VS / SSIS bug but rather something I am / am not doing. 3 tasks I have written all behave the same. I have to "nudge" them before savign the package.
Any ideas what the problem might be?
TIA
Cheers,
Crispin
View 3 Replies
View Related
Jun 23, 2006
I've created a custom Data Processing Extension and I've implemented the IDBCommandAnalysis interface so that my reports can enter parameters and pass them to my Data Processing Extension.
My question is, how do I extract the value from the Parameters coming from the report? Where do the parameters get passed off from the report? I can query the Parameters collection and my report gets prompted in Preview mode to enter something for the parameter but I can't find the spot where it gets passed for processing.
View 5 Replies
View Related
May 12, 2015
I am writing my first custom SSIS task and I can see that, if I put a public property into the task, I see that property in the standard Properties window. If I add a property of type String, I can put a value in that property, in the task code, and when I instantiate the task in a package, I can see the value I entered.
To try and get a drop down list property in the Properties window, I declared a property of type Combobox, and indeed a drop down list appears in that property.
My problem is trying to get values in that property. I have used the test items:
   Property.Items.add("Fred")
   Property.Items.Add("Jim")
But I do not see the values in the drop down list. All I do see is one item with a value of "(none)".
View 3 Replies
View Related
Jun 25, 2007
Hello Experts. You may have more luck at this than me.
I am interested in finding the quantity of items that were ordered alone. I have an orderid field and a product field. So the count of the orderid has to equal one and the have them grouped by product.
Example of how data looks like
I am looking for transactions like orderid 3 and 5.
OrderID
Product
1
hotdog
1
burger
1
taco
2
burrito
2
snack
2
chips
3
burger
4
hotdog
4
burger
4
taco
5
burrito
6
snack
6
chips
When i run
SELECT product, count(orderid)
From Table
Where BusinessDateID = 20060725
group by product
having (count(orderid)=1)
I only get back items that were only sold once.
I am looking for a result that looks like this
Product
Ordered alone
hotdog
2
burger
3
taco
4
burrito
32
snack
12
chips
76
View 7 Replies
View Related
Sep 13, 2000
I need to export data in a specific order (e.g. the order in which the data was inserted into the table). My BCP was doing this then just started exporting in random order. I know that SQL 7 doesn't guarantee return order unless specified by an ORDER BY clause. However, that's not possible with BCP unless you use the command line BCP with the QUERYOUT option. That's my problem. I'm using the BulkCopy object in DMO and I don't see an option to order the data or use a query with an order by statement. Any suggestions?
--Buddy
View 1 Replies
View Related
Jan 31, 2008
Hi all,
I feel like I'm missing something really simple here...
I'm trying to write an sp to return a list of countries alphabetically to populate a web drop-down list in a form. However, since most people using the form will be from USA, I want "USA" to appear as the first row, then the rest should be alphabetical, e.g. ("USA", "Afghanistan", "Albania"... "Zimbabwe")
I'm using a UNION query, but it's ordering the result set so that USA appears alphabetically, not as the first row. I'm not using an ORDER BY clause.
Here's the code I'm using:
CREATE PROCEDURE GetCountries AS
SELECT Country_Name
FROM Countries
WHERE Country_Name = 'USA'
UNION
SELECT Country_Name
FROM Countries
WHERE Country_Name <> 'USA'
GO
I also tried selecting into a temp table and doing a UNION that way, but got the same results.
View 3 Replies
View Related
Jan 18, 2008
I€™m trying to follow examples from: http://www.sqlmag.com/Articles/ArticleID/49240/49240.html?Ad=1 for an update statement that needs to run in a specified order.
Here€™s my problem:
I have a table:
TopicActivity
PK €“ DayNum int (this is a date in YYYYDDD format)
PK €“ TopicId int
Visits int
LifetimeVisits int
LifetimeVisits is a new column that I want to calculate the value using the previous Visits column data.
Sample Data:
DayNum TopicId Visits LifetimeVisits
2008001 1 5 0
2008002 2 1 0
2008002 1 3 0
2008003 1 10 0
I want the end result to look like this:
DayNum TopicId Visits LifetimeVisits
2008001 1 5 5
2008002 2 1 1
2008002 1 3 8
2008003 1 10 18
Here is the query I€™ve been trying:
WITH ordered AS
(
SELECT *, ROW_NUMBER() OVER(PARTITION BY TopicId ORDER BY DayNum) AS RowNum
FROM TopicActivity
)
update ordered set
ordered.LifetimeVisits = ordered.Visits +
isnull((select o2.LifetimeVisits
from ordered as o2
where o2.TopicId = ordered.TopicId
and o2.RowNum = (ordered.RowNum - 1)),0)
The update doesn€™t seem to be happening in order as LifetimeVisits seems to have random results every time I run the query. (Usually the first couple of rows are right. I€™m dealing with thousands of records) I can€™t use a cursor as the query takes way to long.
I'm running SQL Server 2005.
View 6 Replies
View Related
Mar 8, 2007
Hi,
I am creating a custom transformation component, and a custom user interface for that component.
In
my custom UI, I want to show the custom properties, and allow users to
edit these properties similar to how the advanced editor shows the
properties.
I know in my UI I need to create a "Property Grid".
In
the properties of this grid, I can select the object I want to display
data for, however, the only objects that appear are the objects that I
have already created within this UI, and not the actual component
object with the custom properties.
How do I go about getting the properties for my transformation component listed in this property grid?
I am writing in C#.
View 5 Replies
View Related
Jul 5, 2006
hi,
i am a newcomer and a freshman in asp.net. i am now writing a web-based system for SME as my final year project. i am going to use sql server and asp.net in C# to perform my final year project.
as asp.net is new for me, i would have some simple problems to ask.
1. in the project, i would like the system can automatically generate the enquiry number for each new order input to the system. for example today is 05 July 2006, the enquiry number would like 2006211xxxx, where 2006 is year, 211 is the day count start from 1 Jan and xxxx is the random number/ ordered number. how can i implement this? i even don't know how to generate the ordered number. could anyone help me
2. if there is an unknown test sample in each order input. as the sample number for each order is different, how can i set a flexible table that can have different number of rows for user to input the test result.
thanks
Rgds, universe
View 1 Replies
View Related
Jan 16, 2014
Installed the Northwind database for data to practice with. I'm trying to combine data from several tables to make the orders table more readable. Meaning, I'm trying to replace the EmployeeID field with the combination of the firstname and lastname fields from the Employees table. Everything works fine until I try to sum the Unit price field from the [Order Details] table. Using just a SUM() function or the Select statement below causes the error and any combination of fields in the Group By command don't correct it. It's clear that I'm doing something wrong, I'm just not sure how to get the data I want or use the group by command properly. Query below:
Select o.OrderID, c.companyName, e.firstname + ' ' + e.lastname EmployeeName, o.orderdate, s.companyName,
o.Freight, o.shipName, o.ShipAddress, (Select Sum(od.UnitPrice) from [Order Details] od where od.OrderID = o.OrderID)as Amount
from orders o, customers c, Employees e, Shippers s, [Order Details] od
where o.CustomerID = c.CustomerID
[Code] ....
Running the first query (with the select statement) works, but returns a row for each of the the items that was ordered for that OrderID and NOT using the Group By. I would like to have the SUM() of the items ordered in one row. Is this possible?
View 6 Replies
View Related
Jul 23, 2005
When a nonunique nonclustered index is built on top of a clusteredindex, is it guaranteed that the bookmark in the nonclustered indexwill be kept in the same order as the clustered index?Here's an example to demonstrate my question:CREATE TABLE indextest (col1 int NOT NULL,col2 int NOT NULL,col3int,col4 int)ALTER TABLE indextest ADD PRIMARY KEY CLUSTERED (col1,col2)CREATE INDEX ix_indextest ON indextest (col1,col3)GOINSERT indextest VALUES (1,2,1,1)INSERT indextest VALUES (1,3,2,1)INSERT indextest VALUES (1,4,2,1)INSERT indextest VALUES (2,1,1,1)INSERT indextest VALUES (1,1,1,1)SELECT col1,col2 FROM indextest WHERE col1=1 AND col3=1DROP TABLE indextestThe select statement above is covered by the nonclustered index, sothat index is used. However, the nonclustered index is defined only toensure the ordering of col1 and col3 within the index; col1 and col2follow within the index as the bookmark to the clustered index. When Irun this query, my desired result is to have the records appear in theorder supported by the clustered index:1,11,2As it happens, the result I got was indeed in that order, but I don'tknow if it was mere coincidence, or if the bookmark in the nonclusteredindex is maintained in the same order as the clustered index. If Iwant to ensure the above order, is it sufficient to have thenonclustered index defined as above, or do I need to define it as:create index ix_indextest on indextest (col1,col3,col2)just to be sure that the results are returned in ascending order forcol1,col2? If the two-column index is sufficient, is it guaranteed tostill be sufficient in SQL2005 and future versions of SQL Server, or amI better off adding the third column just to be safe?Thank you,--Dennis Culley
View 4 Replies
View Related
Mar 7, 2008
How would i find the 3rd date in a sequence of dates, that is ordered?
Example
Date1 = 08-01-01
Date2 = 08-02-01
Date3 = 08-03-01
Date4 = 08-04-01
i need to retrieve Date3
View 4 Replies
View Related
Oct 19, 2007
I'd like the "OUTPUT DELETED.* INTO target table" resulting from a DELETE to occur in the same order as the clustering key of the target table. Is this possible?
View 6 Replies
View Related
Nov 5, 2012
I would like to do a SELECT query and have the return set ordered by the order which the rows are physically stored in the table.
Specifically, something like:
Select a.*, b.normalizedColumn
FROM table a
JOIN table b
(a.id = b.id)
ORDER BY "Physical order of table a rows"
I believe if there is a clustered index on the table, I can just order by that index and it SHOULD be the physical order of the table.
(I would like to see this as I am generating mock data and would like to verify the "randomness" of the data inserted).
View 6 Replies
View Related
May 13, 2008
How do you all recommend storing ordered pairs in SQL Server 2005? I plan to add one record for every data point but this will generate many records and requires an extra field to relate the points together. Are there any better ways to do this? Can the data still be searchable or does it have to be unpacked first?
View 2 Replies
View Related
Jul 23, 2005
Ive been playing with this for a few days and thought I might thow itout for seggestions.I have Several Queries that need counts returnedThe Queries are Mutually Exclusive meaning whatever Query they returnin first they cannot be included in the counts of any queries belowthem.This set of queries for exampleSelect ID From Customers where FIRST_NAME = 'Chris' (would return say150)Select ID From Customers where ST='OH' (This would retunr say 50, BUTRun alone it might return 70, however 20 of those were in the firstQuery so they arent to be retunred in this result set.The total for Bot Queries would be 200But If I reverse it like soSelect ID From Customers where ST='OH' (This now returns 70)Select ID From Customers where FIRST_NAME = 'Chris' (This now returns130)The total of course for BOT Queries is 200 but I dont need that total Ineed the total for EACH Query depending on its orderingWhat I need are the single counts depending on the order in which thequeries are runIt seems like a recursion problem, but It might go past 32 level so Icant use recursive SQL ( I dont think )I've thought of (or tried to think how to use Not In, Not Exist, etcbut still dosent come up with the results....)How Can I grab the counts for each Query ?Chris
View 5 Replies
View Related
May 3, 2006
How can I create a function that returns hierarchical data from a table with this structure:
- CategoryID
- CategoryName
- CategoryFather
I want to bring the result set like this...
CategoryID | CategoryName | CategoryFather | HierarchicalLevel
1 | Video | 0 | 0
2 | DivX | 1 | 1
3 | WMV | 1 | 1
4 | Programming | 0 | 0
5 | Web | 4 | 1
6 | ASP.Net | 5 | 2
7 | ColdFusion | 5 | 2
How can I do this? Does anybody has a sample code? I need this on SQL Server 2000 and if it's possible (but not too necessary) in SQL Server 2005.
Thanks.
View 9 Replies
View Related
May 15, 2008
Greetings,
I have a C# application that calls a stored procedure to query the database (MSSQL 2005). I only have one field/column returned from the query but I need that column ordered.
How do I use the ORDER BY clause without returning the index column which does the sorting? The first example is NOT what I want. I want something that works like the second example which only returns the 'Name' column.
ALTER PROCEDURE [dbo].[MyProcedure]
AS
BEGIN
SELECT DISTINCT A.Name, A.index
FROM
...
...
ORDER BY A.[Index], A.Name ASC
END
ALTER PROCEDURE [dbo].[MyProcedure]
AS
BEGIN
SELECT DISTINCT A.Name
FROM
...
...
ORDER BY A.[Index]
END
Thanks
View 14 Replies
View Related
Aug 14, 2007
Hi,
I've created a Custom Data Flow Component and added some Custom Properties.
I want the user to set the contents using an expression. I did some research and come up with the folowing:
Code Snippet
IDTSCustomProperty90 SourceTableProperty = ComponentMetaData.CustomPropertyCollection.New();
SourceTableProperty.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
SourceTableProperty.Name = "SourceTable";
But it doesn't work, if I enter @[System:ackageName] in the field. It comes out "@[System:ackageName]" instead of the actual package name.
I'm also unable to find how I can tell the designer to show the Expression editor. I would like to see the elipses (...) next to my field.
Any help would be greatly appreciated!
Thank you
View 6 Replies
View Related
Apr 2, 2007
Hi,
I'm trying to enable Expression for a custom property in my custom data flow component.
Here is the code I wrote to declare the custom property:
public override void ProvideComponentProperties()
{
ComponentMetaData.RuntimeConnectionCollection.RemoveAll();
RemoveAllInputsOutputsAndCustomProperties();
IDTSCustomProperty90 prop = ComponentMetaData.CustomPropertyCollection.New();
prop.Name = "MyProperty";
prop.Description = "My property description";
prop.Value = string.Empty;
prop.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
...
}
In design mode, I can assign an expression to my custom property, but it get evaluated in design mode and not in runtime
Here is my expression (a file name based on a date contained in a user variable):
"DB" + (DT_WSTR, 4)YEAR( @[User::varCurrentDate] ) + RIGHT( "0" + (DT_WSTR, 2)MONTH( @[User::varCurrentDate] ), 2 ) + "\" + (DT_WSTR, 4)YEAR( @[User::varCurrentDate] ) + RIGHT( "0" + (DT_WSTR, 2)MONTH( @[User::varCurrentDate] ), 2 ) + ".VER"
@[User::varCurrentDate] is a DateTime variable and is assign to 0 at design time
So the expression is evaluated as: "DB189912189912.VER".
My package contains 2 data flow.
At runtime,
The first one is responsible to set a valid date in @[User::varCurrentDate] variable. (the date is 2007-01-15)
The second one contains my custom data flow component with my custom property that was set to an expression at design time
When my component get executed, my custom property value is still "DB189912189912.VER" and I expected "DB200701200701.VER"
Any idea ?
View 5 Replies
View Related
Aug 17, 2005
What I want to accomplish is that at design time the designer can enter a value for some custom property on my custom task and that this value is accessed at executing time.
View 10 Replies
View Related
Aug 16, 2006
I am writing a custom task that has some custom properties. I would like to parameterize these properties i.e. read from a varaible, so I can change these variables from a config file during runtime.
I read the documentation and it says if we set the ExpressionType to CPET_NOTIFY, it should work, but it does not seem to work. Not sure if I am missing anything. Can someone please help me?
This is what I did in the custom task
customProperty.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
In the Editor of my custom task, under custom properties section, I expected a button with 3 dots, to click & pop-up so we can specify the expression or at least so it evaluates the variables if we give @[User::VaraibleName]
Any help on this will be very much appreciated.
Thanks
View 3 Replies
View Related
May 1, 2008
As the topic suggests I need the end results to show a list of shows and their dates ordered by date DESC.
Tables I have are structured as follows:
SHOWS
showID
showTitle
SHOWACCESS
showID
remoteID
VIDEOS
videoDate
showID
SQL is as follows:
SELECT shows.showID AS showID, shows.showTitle AS showTitle,
(SELECT MAX(videos.videoFilmDate) AS vidDate FROM videos WHERE videos.showID = shows.showID)
FROM shows, showAccess
WHERE shows.showID = showAccess.showID
AND showAccess.remoteID=21
ORDER BY vidDate DESC;
I had it ordering by showTitle and it worked fine, but I need it to order by vidDate.
Can anyone shed some light on where I am going wrong?
thanks
View 3 Replies
View Related
Apr 21, 2006
1) We are writing a custome Source component for Oracle with OCI calls, Could some one please let me know how to Enable Error Handling for the Same,
2) Is it possible to write Custome Error Handeling Component for SSIS? if yes could you please help me on how to write it.
Thanks in advance.
View 1 Replies
View Related
Apr 16, 2014
How to count the number of values that exist in a row based on the values from an array of numbers. Basically the the array of numbers I want to look for are in row 1 of table [test 1] and I want to search for them and count the "out of" in table [test 2]. Excuse me for not using the easiest way to convey my question below. I guess in short I have 10 numbers and like to find how many of those numbers exist in each row. short example:
Table Name: test1
Columns: m1 (int), m2 (int), m3 (int) >>> etc
Array/Row1: 1 2 3 4 5 6 7 8 9 10
------
Table Name: test2
Columns: n1 (int), n2 (int), n3 (int), n4 (int), n5 (int)
Row 1: 3, 8, 18, 77, 12
Row 2: 1, 4, 5, 7,18, 21
Row 3: 2, 4, 6, 8, 10
Answer: 2 out of 5
Answer: 4 out of 5
Answer: 5 out of 5
View 2 Replies
View Related
Jun 4, 2007
Hello all,
I am trying to think my way through a solution which I believe others have probably come across... I am trying to implement a matching routine wherein I need to match an address against a high value and a low value (or, for that matter an input date vs. a start and end date) to return the desired row ... i.e. if I were to use a straight vb program I would just use the following lookup:
"SELECT DISTINCT fire_id, police_ID, fire_opt_in_out, police_opt_in_out FROM ipt_tbl " & _
" WHERE zip_code = @zip_code AND addr_prim_lo <= @street_number AND addr_prim_hi >= @street_number " & _
" AND addr_prim_oe = @addr_prim_oe AND street_pre = @street_pre AND street_name = @street_name " & _
" AND street_suff = @street_suff AND street_post = @street_post " & _
" AND (expiry_date = '' OR expiry_date = '00000000' OR expiry_date > @expiry_date)" & _
" GROUP BY fire_ID, police_ID, fire_opt_in_out, police_opt_in_out"
My question, then, is how would you perform this type of query using a lookup / merge join or script? I have not found a way to implement a way to set the input columns? I can set the straight matches without a problem, i.e. lookup zip code = input zip code, but can't think of the correct way to set comparisons, i.e. lookup value 1 <= input value AND lookup value 2 >= input value
Any suggestions?
thanks for your time...
View 5 Replies
View Related
Feb 23, 2007
I have a DTSX package which reads values from a fixed-length text file using a data reader and writes some of the column values from the file to an Oracle table. We have used this DTSX several times without incident but recently the process started inserting NULL values for some of the columns when there was a valid value in the source file. If we extract some of the rows from the source file into a smaller file (i.e 10 rows which incorrectly returned NULLs) and run them through the same package they write the correct values to the table, but running the complete file again results in the NULL values error. As well, if we rerun the same file multiple times the incidence of NULL values varies slightly and does not always seem to impact the same rows. I tried outputting data to a log file to see if I can determine what happens and no error messages are returned but it seems to be the case that the NULL values occur after pulling in the data via a Data Reader. Has anyone seen anything like this before or does anyone have a suggestion on how to try and get some additional debugging information around this error?
View 12 Replies
View Related
Nov 13, 2015
I am working with a data set containing several years' of monetary values. I have entries for past dates and the associated values, and I also have entries for future dates. I need to populate the values of the future date records with the values from the same date the previous year. Is there any way this can be done in Power Pivot?
View 6 Replies
View Related
Jul 28, 2015
I have a string variable
string str1="1,2,3,4,5";
I have to use the above comma separated values into a SQL Search query whose datatype is integer. How would i do this Search query in the IN Operator of SQL Server. My query is :
declare @id varchar(50)
set @id= '3,4,6,7'
set @id=(select replace(@id,'''',''))-- in below select query Id is of Integer datatype
select *from ehsservice where id in(@id)
But this query throws following error message:
Conversion failed when converting the varchar value '3,4,6,7' to data type int.
View 4 Replies
View Related
Apr 11, 2008
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
View 1 Replies
View Related
