I have a website that works OK on my local machine when I test it within Microsoft Visual Studio's debugging mode. However now that I have copied it over to a remote server it is failing with an error message of:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)As far as I'm aware I have never used SQL Server with my webpage. All connections to databases are to Oracle with connection strings and providers set up in the webconfig file. The website does however use a login control to recognise authorised users. Does this mean I've unknowingly been using SQL Server (to support the login control) and I therefore need to install this on the remote machine? Or is it something simpler? Wondered if anybody had seen this error message before?
Supposingly I take Full backup of database once a week and differential backup daily and TransactionLog backup every 30 min ( All on a File on SQL Server ). If my sql server crases then is it possible to get to-the-point recovery of database by just restoring the database by mentioning the file names.
I am worried mainly about TransactionLog backup.
I will be pleased if some one can suggest other better way of backing large database.
We have implemented a simple form of failover which combines daily full backups, differentials every 10 minutes and log backups every minute. We developed this form of "poor man's replication" because we will be deploying 3,400 instances of SQL in our retail chain.
The event log is cluttered with "Database Backedup" messages from all of these backups. I altered the messages to "no log" but they continue to appear. Is there any way that I can disable these messages or are they hard wired?
When we are doing our backup of our SQL servor there is one database that won't backup. The user that created it named in Vendor Insurance Compliance with spaces in between the words. The error message that we're getting from the backup is incorrect syntax near 'Insurance' Error number 10007. Is it beacuse of the spaces in between the names? I'm fairly new to SQL server - are you allowed to put blanks in the names?
Anyone knows why I am getting this error €œNon-SysAdmins have been denied permission to run DTS Execution job steps without a proxy account.", when I run a differencial backup. I used an administrator account to create the job. Any suggestions
Hi,After sending a request, I would get the possible error message.Not the code @@error, nor the exact content of sysmessages, but themessage like it could be in the log file.TIA,TSalm
This is my first posting and actually I have big problem which I need to resolve immediately:
I have a 38 GB Database on my SQL Server which I want to full-backup. Until now backup was created on the same volume where the database resides. But now the volume is out of disk space. So what we did is that we connected an external USB disk drive with 500 GB to the SQL Server and try to backup there.
But our first and all consecutive backup attemps failed with error SQL-DMO (ODBC SQLState: 42000). It's working fine the first few minutes as we can see that the backup file is continously growing. But then it abruptly aborts with above error message.
Can anyone figure out why ? Any help is appreciated.
hello friend i have table1 and table2 and table3.. i have category and product number and name of colums for per table i want to do this.. select category from table1 where category= textbox1.text and category from table2 where category= textbox1.text and category from table 3 where category= textbox1.text and if there are category for per category colums of per table, gridview should displayed table1 and table2 and table2 in category and name and product number of colums:) if there is category of coulums for table1, gridview should displayed just table1 in category and name and product number of colums:) i want to 3 bind for gridview1 :) it should be without join because i dont need join.. columns name is same for tables but value of category is different but it can be same :) cheers
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.". Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.
I am applying hourly differential backup to the backup server from production with the following command. This command makes the database on standby server into read only mode.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup' WITH MOVE 'arsystem' TO 'd:ardataarsystem.mdf' , MOVE 'arsystem_log' TO 'D:ARLOGARsystem' , STANDBY = 'E:SQL backup from productionSQL daily diff back up'
Now I want to run a command which will put the database in write mode. I have created a job which would make the datbase Write mode. This job runs successfully sometimes and fails sometimes. I need to ensure that the job always succeeds. When it fails, how do I troubleshoot and what is the possible fix?
Thanks in advance.
The error message is
Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The steps for the job are as follows with the failing step highlighted in bold.
copy /y "\172.31.9.12Remedy BackupackupSQL backupsql_full_backup" "E:SQL backup from productionsql_full_backup"
copy /y "\172.31.9.12Remedy BackupackupSQL backupSQL daily diff back up" "E:SQL backup from productionSQL daily diff back up"
xp_cmdshell 'net stop "bmc remedy action request system server"'
exec rp_kill_db_processes 'ARSYSTEM'
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
Failing step
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
RECOVERY
xp_cmdshell 'del /f "E:SQL backup from productionsql_full_backup"'
xp_cmdshell 'del /f "E:SQL backup from productionsql daily diff back up"'
xp_cmdshell 'net start "bmc remedy action request system server"'
I have scheduled the following hourly diffential restore job too which never fails.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup' WITH MOVE 'arsystem' TO 'd:ardataarsystem.mdf' , MOVE 'arsystem_log' TO 'D:ARLOGARsystem' , STANDBY = 'E:SQL backup from productionSQL daily diff back up' EXEC MASTER..XP_CMDSHELL 'del /f "E:SQL backup from productionSQL daily diff back up"'
well i have got a form which displays some result from the databasse, it runs fi9 in webmatrix, but when i try to run it from my main page and when i click on that button which should displays the aspx page, it gives me this error:
Server Error in '/' Application. --------------------------------------------------------------------------------
Login failed for user 'MUFADDALASPNET'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'MUFADDALASPNET'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
-------------------------------------------------------------------------------- Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
I am getting an error message when trying to up to update a database from a form. It appears a simple looking error but I can't seem to see what the problem is Any ideas would be appreciated
This is the error message Line 1: Incorrect syntax near '('. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near '('.
Source Error:
Line 95: sqlConnection.Open Line 96: Try Line 97: rowsAffected = sqlCommand.ExecuteNonQuery Line 98: Finally Line 99: sqlConnection.Close
I created database using SQL server and runs under Cassini. The creation of database is ok but I have a problem when I am creating the table in database. Whenever I execute the code to create the tables, it shows the error message like 'Server not found' or just hang there. Does anybody know why it hang while I am creating the table? Is it because of the code or it's the time out error. Pls help as I am very new to this area.
Hi everybody, There are times when the database (SQL 7.0) cannot be accessed ( backup, routine maintenance, etc....) from asp page. In those cases i am getting an ugly asp error message. Is there a way ( code ) which will trap that error and return a nicer custom message for user or something like that. Thanks a lot,
Any advice from the crowd? Every time I try to run "Copy DatabaseWizard" I get an error message saying I must be a member of thesysadmin group and have permission to copy files over the network. I'ma local admin on both boxes and a member of the sysadmin group on bothSQL servers and an admin on the network. What am I missing here?Thanks,Ralph NobleJoin Bytes!
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
Ok so I'm using the Management Studio Express and was able to log in and get into the database server, but I had to click the "options>>" button and change database I wanted to connect to from <<default>> to my database on the server or else I get the "cannot open user database, login failed" error message.Then I right click my database and it gives me the "Cannot open user database. Login failed" error message, even though I already connected to the database to login during the connect screen. Also I'm able to interact with the database using SQL QUERIES in the Management Studio, like adding new tables with it, but if I right click the database and click "add table" I get that error.What gives? I know I have permission since I was able to log on, and modify the database using SQL queries but if use the GUI I can't use it. I can't even right-click select "properties" without getting that error. The reason I want to use the GUI is because I want to right click and use the backup feature of the database.My guess is that Management Studio continues to point to the default database(which gives me that message) after I already logged in, so I have no idea how to change the default database that management studio points to, to the one I do have permission to use. Thanks in advance.
I've got code that on my own machine (visual studio .net 2003 and iis and sql server all exist on this box) works great. I display my test page, which loads a dropdownlist on page_load. This works great on my own machine.
When I move the code to our dev environment. Web server and database servers on separate boxes. I get the error "Object reference not set to an instance of an object" when i try to open the connection to the database. I thought it had to do with permissions and I check all through sql server and everything looks great. I then thought it was the connection string. I still haven't ruled this out, but I wrote a quick vbscript app to attach to the database and try to pull a record. The vbscript worked fine. So, the code works fine on my computer, but not on the web server. The connection does work with vbscript, but through my asp.net web app I get the "object reference" error.
All code below...
ASP.NET webpage: private void Page_Load(object sender, System.EventArgs e) {
if( !IsPostBack ) { // Create a command object for the query string mySelectQuery = "select id from vw_abcd order by ID";
SqlCommand myCommand = new SqlCommand(mySelectQuery,sqlConnection1); sqlConnection1.Open();
Connection string on my machine: workstation id=wXXXXXX01;packet size=4096;user id=testuser;password=testpass;integrated security=SSPI;data source=wXXXXXX01;persist security info=False;initial catalog=TestDB"/>
Connection string on web server: network library=DBMSSOCN;data source=xxx.xx.xxx.xxxinstance1;user id=testuser;password=testpass;initial catalog=TestDB
vbscript: Dim connConnection, rstresultset strConnectionString = "driver={Sql Server};server=xxx.xx.xxx.xxxinstance1;user id=testuser;password=testpass;database=TestDB"
Set connConnection = CreateObject("ADODB.Connection")
connConnection.Open strConnectionString Set rstresultset = createobject("ADODB.Recordset")
rstresultset.ActiveConnection = connConnection
rstresultset.Open "select id, comment from testtable", connConnection
Error message and stack trace: Object reference not set to an instance of an object.
at System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) at System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) at System.Data.SqlClient.SqlConnection.Open() at Web2.Drilldown.Page_Load(object sender, System.EventArgs e)
When I want to execute my package as a job in a SQL Server 2005, I get this Message:
Executed as user: EDAsvcSQLServerPMS. ....00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 09:46:00 Error: 2008-05-16 09:46:01.41 Code: 0xC0048020 Source: Data Flow Task Data Flow Task (DTS.Pipeline) Description: The version of component "Excel Source" (1) is not compatible with this version of the DataFlow. End Error Error: 2008-05-16 09:46:01.54 Code: 0xC0048020 Source: Data Flow Task DTS.Pipeline Description: The version of component "Excel Source" (1) is not compatible with this version of the DataFlow. End Error Error: 2008-05-16 09:46:01.54 Code: 0xC0048021 Source: Data Flow Task Excel Source [1] Description: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Excel Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://ww... The package execution fa... The step failed.
The package works fine on the developed server but when I try it out on our integration server it won't go through without these errors. The protection level is set on DontSaveSensitiv and allready I had an error less.
I hope someone can help me, because I can't find anything with google. Thanx!
I have a stored procedure which uses a column of a table. Unfortunately, the table exists, but the column does not. Still when we create or alter it, it shows 'completed successfully'.
Also, when this script is executed on another server, it gives the respective error, correctly.
Is there any database option or setting which has been tampered or changed by mistake.
Your helpful suggestions are welcome. Thanks in advance.
I am having difficulty restoring a database (DB_1) with 2 datafiles and one log file, DB Structure is as following:
Filegroup PRIMARY with file name 'fnm_data' with physical file name and location D:dbfile_1.mdf, Filegroup 'FG1' with file name 'fgnm1_data1' with physical file name and location F:dbfile_FG1.mdf, One log file with file name 'fnm_log' with physical file name and location (E:loglog_db.ldf)
{Note} Logfile resides on E drive whereas Datafiles reside on several other drives.
I need to restore the DB on another machine. And I need to move the log file to a drive other than E.In this case it is K drive. Hence I have used the following code,
restore log DB_1 from disk='M:kupccciclog.txt'
WITH RESTRICTED_USER , MOVE 'fnm_log'
TO 'K:DBlog_db.ldf', recovery, replace,RESTART
go
When I try to restore from backup files, I keep error message saying "Physical file name E:loglog_db.ldf may be incorrect." 'fnm_log' cannot be restored. Use Move command to identify a valid location for the file.
Even though I am using Move command to move the log file.
Then I found that if I create a drive with E: and a folder named 'log' then restore program runs alright. That is, when E:log exists then code does run smoothly. All the restore code is looking for the presence of path of the log file from where it is been backed up. In this case it is E:log folder. Once the database is restored I could kill that directory and nothing happens. Also log file has been restored on K:DB only.
Why the restore code is looking for the initial drive letter and path even though I have used Move command? Is there an issue in my code?
I am currently working in VB.NET with SQL Mobile 2005. I am trying to compact a database, .sdf, using the SqlCeEngine Object compact(connectionstring). When I use this code to compact a small database, only about 300KB, it returns okay however when I try to compact a larger database, about 9MB, it returns with a SQL Error Code: 0, "The operation completed successfully" however with no compacted database. The code works however it only seems to work for smaller databases. Does anyone have any ideas on how to correct this error or tell me why it returns with that type of error.
I have a field that contains a town  ex : New York. Sometimes, the field will have brackets to be more specific ex: New York (Brooklyn). What I need is a formula that will return only "Brooklyn" if there are brackets or  the whole field if there are no brackets.Here's what I thought would do the trick :
So if InStr returns more than 0, meaning that I have brackets, I'll split at the "(", get the second part and remove the last character which is the closing bracket I don't want. If there is no bracket, I'll return the whole field.Somehow, when there is no bracket, my report overview shows me "#Error" as if the first Iif was true and what's in the true part is not actually possible, because it's trying to take the second part of a split that couldn't split because there is no bracket to split.
I'm new to SQL CLR programming and have recently implemented a few simple test UDTs. Typically I provide a property called Value and, if applicable, a method to display that value in a different format. For example, I havea UDT representing Australian states: the Value property returns the acronym (e.g. VIC) and the ProperName() method returns the full name (e.g. Victoria).
However, when I do a regular query, say SELECT * FROM Customers, the values in the column in which I am using the UDT are displayed as hex (I believe), for example '0x008064'.
Is this behaviour the result of a faulty implementation on my part or is it just the way SQL Server displays a non-native data type?
Here's the essential implementation code:
[Serializable] [SqlUserDefinedType(Format.UserDefined, IsByteOrdered = true, MaxByteSize = 58, IsFixedLength = false)] public struct udt_au_stateId : INullable, IBinarySerialize { private bool _isNull; private AU_StateId _state; private enum AU_StateId { ACT, NSW, NT, QLD, SA, TAS, VIC, WA }
public void Read(BinaryReader r) { SetStateId(r.ReadString()); }
public void Write(BinaryWriter w) { w.Write(_state.ToString()); }
public SqlString Value { get { return _state.ToString(); } set { if (!SetStateId(value.ToString())) throw new ArgumentException("'" + value.ToString() + "'" + " is not a valid Australian state or territory."); } }
public SqlString ProperName() { return GetProperName(); }
public override string ToString() { if (_isNull) return "<NULL>"; else return _state.ToString(); }
public bool IsNull { get { return _isNull; } }
public static udt_au_stateId Null { get { udt_au_stateId u = new udt_au_stateId(); u._isNull = true; return u; } }
public static udt_au_stateId Parse(SqlString s) { if (s.IsNull) return Null; else { udt_au_stateId u = new udt_au_stateId(); u.Value = s; return u; } }
I have exported a report to excel that contains an ntext column. The exported excel file shows "#Error" for the ntext column in some of the rows. If I see the same report in reporting services I don't see any problem. I have checked that this is not any issue with the length of the text. Could you suggest me something on this?
I installed SQL 2005 including backward compatibility, MSDN libraries and SP2 a new Windows 2003 server (chose mixed mode authentication). Installation was successful and I then installed an off the shelf database with Windows authentication which also installed successfully. I created a new group in AD, added the database users into the group and gave db-owner rights to the group in SQL as advised by the installation guide. However, when I try to open the database it gives an error message saying "Cannot open database.[DBNETLIB][ConnectionOpen(Connect()).] SQL server does not exist or access denied". I also tested it adding an individual user (myself) as a user to no avail. When I set up DSN in ODBC on my computer I can successfully test the connection but can't run the application. The connection is via TCP/IP. Any suggestions?
Can this be done in ASP.Net, as it stands my database views in my ASP.Net application are just standard Unlike the view in MS Access which shows the collapsable linked data below the data (from a different table)
I have sql server 2005 express installed on an XP machine. When I browse for a database engine, SQL server 2005 management console displays machinenamesqlexpress in the local tab, BUT in the network tab only the machinename is displayed. Thus, I cannot connect to express from a networked machine.
