A problem has come up in designing a Web page to maintain a small reference table in SQL Server 2000 (9 columns, about 25 records).
I tried to design the Web page to allow INSERT and UPDATE operations using a single page that posts back to itself. The page contains a set of empty form fields for a new record, followed by a set of filled-in form field for each row in the table. The form fields for existing records are given a unique name based on the field name concatenated with the primary key value for that row.
If I set up the page to INSERT only, it works properly. But when I add the fields for existing records, the INSERT operation malfunctions. Specifically, anytime a set of existing fields for a particular column is added to the page, the INSERT will no longer work properly for that column. This is true for all fields except the primary key field. It always INSERTs correctly. I tried adding only some columns to the set of existing form fields. In that case, the INSERT operation added the correct values for the fields that were not listed in the existing records section, but failed for the others.
I am using the INSERT INTO syntax for that operation and the recordset .Update syntax for the edits. I tried using the recordset .AddNew/.Update syntax for the insert, but it exhibited the same problems. The column data types contain smallint, bit, nvarchar, and ntext types.
I know that the correct values are being put into the INSERT statement. I also tried renaming the INSERT form fields to be totally different than the names of the existing record fields. But the problem comes back no matter what.
If necessary, I can split the logic so that inserts and updates are handled by different pages. But I would like to make this work if possible. If a reader knows why SQL Server is causing this problem, any help would be greatly appreciated.
Fit an intere table in same page without page break for save the excel export.
My table has a Group for order my dates.
I need to have the intere table in the same page, i don't care about blank space at the end of the page.
I can't use the page break beacuse i need an excel export in a unique sheet.. I have tested.. every page break..you'll have a different sheet in your excel export
Can I roll back certain query(insert/update) execution in one page if query (insert/update) in other page execution fails in asp.net.( I am using sqlserver 2000 as back end) scenario In a webpage1, I have insert query into master table and Page2 I have insert query to store data in sub table. I need to rollback the insert command execution for sub table ,if insert command to master table in web page1 is failed. (Query in webpage2 executes first, then only the query in webpage1) Can I use System. Transaction to solve this? Thanks in advance
Hello,I am writing a stored procedure that will take data from severaldifferent tables and will combine the data into a single table for ourdata warehouse. It is mostly pretty straightforward stuff, but there isone issue that I am not sure how to handle.The resulting table has a column that is an ugly concatenation fromseveral columns in the source. I didn't design this and I can't huntdown and kill the person who did, so that option is out. Here is asimplified version of what I'm trying to do:CREATE TABLE Source (grp_id INT NOT NULL,mbr_id DECIMAL(18, 0) NOT NULL,birth_date DATETIME NULL,gender_code CHAR(1) NOT NULL,ssn CHAR(9) NOT NULL )GOALTER TABLE SourceADD CONSTRAINT PK_SourcePRIMARY KEY CLUSTERED (grp_id, mbr_id)GOCREATE TABLE Destination (grp_id INT NOT NULL,mbr_id DECIMAL(18, 0) NOT NULL,birth_date DATETIME NULL,gender_code CHAR(1) NOT NULL,member_ssn CHAR(9) NOT NULL,subscriber_ssn CHAR(9) NOT NULL )GOALTER TABLE DestinationADD CONSTRAINT PK_DestinationPRIMARY KEY CLUSTERED (grp_id, mbr_id)GOThe member_ssn is the ssn for the row being imported. Each member alsohas a subscriber (think of it as a parent-child kind of relationship)where the first 9 characters of the mbr_id (as a zero-padded string)match and the last two are "00". For example, given the followingmbr_id values:1234567890012345678901123456789021111111110022222222200They would have the following subscribers:mbr_id subscriber mbr_id12345678900 1234567890012345678901 1234567890012345678902 1234567890011111111100 1111111110022222222200 22222222200So, for the subscriber_ssn I need to find the subscriber using theabove rule and fill in that ssn.I have a couple of ideas on how I might do this, but I'm wondering ifanyone has tackled a similar situation and how you solved it.The current system does an insert with an additional column for thesubscriber mbr_id then it updates the table using that column to joinback to the source. I could also join the source to itself in the firstplace to fill it in without the extra update, but I'm not sure if theextra complexity of the insert statement would offset any gains fromputting it all into one statement. I plan to test that on Monday.Thanks for any ideas that you might have.-Tom.
I Want to write a single SP which inserts and updates.
CREATE PROCEDURE sp_NewPassword @UserName nvarchar(50), @OldPassword nvarchar(50), @NewPassword nvarchar(50) AS BEGIN INSERT INTO RGH_ChangePassword(vUserName, vNewPassword) VALUES(@UserName, @NewPassword) UPDATE RGH_LoginMaster SET vPassword=@NewPassword WHERE vUserName=@vUserName and vPassword=@OldPassword END
When i tried to create above sp it gives me an error saying
Msg 137, Level 15, State 2, Procedure sp_NewPassword, Line 8 Must declare the scalar variable "@vUserName".
In VB6 using MDAC 2.8 I could do a single select statement that would act as either an Insert or an update. Is there a way to do this in ADO.net? My old VB6 code Dim dbData As New ADODB.Connection Dim rs1 As New ADODB.Recordset Dim strParm As String Dim strCusNo As String ' strParm = "Provider=SQLOLEDB; Data Source=SQL2000; Initial Catalog=DATA_01; User ID=UserName; Password=password" dbData.Open strParm ' strParm = "Select CusNo from CusFil Where CusNo = '" & strCusNo & "'" rs1.Open strParm, dbData, adOpenStatic, adLockOptimistic, adCmdText If rs1.BOF And rs1.EOF Then rs1.AddNew Else
End If With rs1 !CusNo = strCusNo .Update End With rs1.Close ' Set rs1 = Nothing dbData.Close Set dbData = Nothing
1.First i need to update the row if the status column is 0 to 1 2.Need to insert the row IF SegmentId=@SegmentId and SubjectId<>@SubjectId and StaffId=@StaffId 3.Need to insert the row IF StaffId<>@StaffId And ClassId=@ClassId and SegmentId<>@SegmentId and SubjectId<>@SubjectId
I have wrote the stored procedure to do this, But the problem is If do the update, It is reflecting in the database by changing 0 to 1. But it shows error like cannot insert the duplicate
I can think of ways to resolve this issue, but I am wondering if there is a standard practice or some setting that is used to ensure that text containing a single quote, such as "Bob's house", is passed correctly to the database when using a SqlDataSource with all of the default behavior. For example, I have a FormView setup with some text fields and a SqlDataSource that is used to do the insert. There is no code in the form currently. It works fine unless I put in text with a single quote, which of course messes up the insert or update. What is the best way to deal with this? Thank you
I would like to update/insert data into a Orderhearder Table along with the related details into the corrosponding OrderDetails Tables. Can this be done using a single stored procedure or do we have to make one call to the UpdateOrderHeader Stored Procedure and loop thru all the details and call the UpdateOrderDetails Stored Procedure. How do we handle the Transactions in such a case ?
1.First i need to update the row if the status column is 0 to 1 2.Need to insert the row IF SegmentId=@SegmentId and SubjectId<>@SubjectId and StaffId=@StaffId 3.Need to insert the row IF StaffId<>@StaffId And ClassId=@ClassId and SegmentId<>@SegmentId and SubjectId<>@SubjectId
I have wrote the stored procedure to do this. But the problem is If do the update. It is reflecting in the database by changing 0 to 1. But it shows error like cannot insert the duplicate
Here is the stored Procedure what i have wrote
ALTER PROCEDURE [dbo].[InsertAssignTeacherToSubjects]
Hi All, In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
I'm trying to insert data into a table from two tables into a single table along with a hard coded value.
insert into TABLE1 (THING,PERSONORGROUP,ACCESSRIGHTS) VALUES ((select SYSTEM_ID from TABLE2 where AUTHOR IN (select SYSTEM_ID from TABLE2 where USER_ID =('USER1'))),(select SYSTEM_ID from TABLE2 where USER_ID =('USER2')),255)
I get the following-
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
In my web page(.Net/c#) , I want to update few fields of a database table. The code is fine. The stored procedure through which I perform the execution is fine. I'm confidently saying this is because, if I try to do the update direclty while executing the stored procedure, it gets updated. I'm facing a weird problem while trying to update the fields from my web page. When I make an update and submit it, the first time it shows the updated value in the screen. But if I try to refresh it or redisplay the data ( I guess whenever it makes a trip to the database), the old values gets populated instead of the new values. I tried debugging it, but everything seems to be working fine. I looked up the execution in SQL Profiler, everything seems to be fine. I've no clue what's going on. I've proper permissions to make an update. So there is no permission issue. Could someone tell me how to handle this issue and what might be the possible problem which makes the values not update in the database?
update a tables value(a single column), based on a query of another database, using a common column.
Here's what I've cooked up so far:
Declare @trackingNo nvarchar (50) Set @trackingNo = ( select tracking_no from P21_Shipping.dbo.shipping_data t1 inner join P21.dbo.oe_hdr t2 on t1.order_no = t2.order_no
[Code] ...
print @trackingNoThe error it's returning is:
Msg 512, Level 16, State 1, Line 3 Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
So, I'm wanting to query Shipping_data for order_No that matches the same orderNo column value in P21 Database(oe_hdr table), then update P21 oe_hdr table with "trackingNo from Shipping_data
need help on update from one table to another like this this is my first table
tb_all_holiday
id
fname
Start_Date
End_Date
val_holiday
111 aaaa
15/03/2008 21/03/2008
1
222 bbbb
02/05/2008 09/05/2008
3
333 cccc
03/04/2008 15/05/2008
4
333 cccc
29/04/2008 07/07/2008
1
444 dddd
01/05/2008 02/05/2008
1
444 dddd
09/05/2008 19/08/2008
1
555 EEE
09/07/2008 09/08/2008
4
666 fff 10/09/2008 12/09/2008
1 this is my second table to insert into !
i need to insert to another table like this single row for each day from start_date TO END_DATE check each employee add row for each day insert all employee one after one
ID fname new_date val_holiday ----------------------------------------------------
question need help how can i use this code below not for insert i need it for update another table but only if exist the link to the code in this FORUM http://forums.microsoft.com/MSDN/AddPost.aspx?PostID=3208536&SiteID=1&Quote=True
Adam Haines wrote:
GPS,
Since you have such a dependency on dates and date calculations, you should implement a calendar table. A calendar table will make calculation such as this much more simplistic.
Calendar table link http://sqlserver2000.databases.aspfaq.com/why-should-i-consider-using-an-auxiliary-calendar-table.html.
Note the calendar table I use is a little different than this one. The only thing you will need to change is isodate to dt.
Now the code to get the results you need:
Code Snippet declare @t table( id int, fname char(4), Start_Date datetime, End_Date datetime, val_holiday int ) insert into @t values (111, 'aaaa', '3/15/2008', '03/21/2008', 1 ) insert into @t values (222, 'bbbb', '05/2/2008', '05/9/2008', 3) insert into @t values (333, 'cccc', '04/3/2008', '05/15/2008', 4) insert into @t values (333, 'cccc', '04/29/2008', '07/07/2008', 1 )
select id, fname, cal.ISODate, val_holiday from @t t1
inner join Calendar cal on cal.isodate >= t1.start_date and cal.ISODate <= t1.end_date
table2 is intially populated (basically this will serve as historical table for view); temptable and table2 will are similar except that table2 has two extra columns which are insertdt and updatedt
process: 1. get data from an existing view and insert in temptable 2. truncate/delete contents of table1 3. insert data in table1 by comparing temptable vs table2 (values that exists in temptable but not in table2 will be inserted) 4. insert data in table2 which are not yet present (comparing ID in t2 and temptable) 5. UPDATE table2 whose field/column VALUE is not equal with temptable. (meaning UNMATCHED VALUE)
* for #5 if a value from table2 (historical table) has changed compared to temptable (new result of view) this must be updated as well as the updateddt field value.
Now we have different packages for 4 tables data loading. These 4 packages will start at a time. Before going to load the data we have to make the Flag to 1 and after that we have to load it. Because of this we have written Update statement to update the Value to 1 in respective Package.
Now we are getting dead lock because we are using same table at a same time. Because we are updating different records.
I am trying to build a DIM table using a source table that has the following setup...
CREATE TABLE [dbo].[APPL_STATUSES]( [APPLICATIONS_ID] [varchar](10) NOT NULL, [POS] [decimal](10, 0) NOT NULL, [APPL_STATUS] [varchar](5) NULL, [APPL_STATUS_DATE] [datetime] NULL, [APPL_APPLICANT] [varchar](10) NULL) GO
[code]....
What I am trying to do is to break out the APPL_STATUS_DATE into a STATUS_START_DATE and an STATUS_END_DATE in a new table. I also need to be able to update the STATUS_END_DATE based on the previous day's date. Like so...
CREATE TABLE [dbo].[APPL_APPLICANT_STATUSES]( [APPLICATIONS_ID] [varchar](10) NOT NULL, [POS] [decimal](10, 0) NOT NULL, [APPL_STATUS] [varchar](5) NULL, [STATUS_START_DATE] [datetime] NULL, [STATUS_END_DATE] [datetime] NULL, [APPL_APPLICANT] [varchar](10) NULL) GO
I am trying to insert values in a single table with four columns from 4 different sources. is it possible to run these 4 insertions in parallel. all these insertion are independent of each other
I have created a trigger that is set off every time a new item has been added to TableA.The trigger then inserts 4 rows into TableB that contains two columns (item, task type).
Each row will have the same item, but with a different task type.ie.
We need to Insert/Update a Fact Table from staging Table. currently we are using a SP which update Fact Table for Each region. this process is schedule, every 5 min job is run and Update fact table.but time of Insert and Update too long from staging to Fact, currently we are using merge statement for Insert and update.in my sp we are looping number how many region we need to update and at a time single Region we are updating using while loop in current SP.
I'm importing XML file into DataTable and need to Insert Data into SQL Table. I'm not sure if its posible to take a DataTable with Data and insert into DataAdapter. From there i wanted to update SQL using TableAdapter? Any Tips? Thanks,
This should be easy for someone, but I just can't seem to find a sample to do this.....I have created a table...CREATE TABLE dbo.test ( oId int NOT NULL UNIQUE, test1 varchar(50) NOT NULL PRIMARY KEY )Now, I need to go back and simply add another column to the table such as test2 varchar(50)Not sure if the insert is the way to go and been playing around with various statements but with no luck.Suggestions?Thanks all,Zath
I am new to triggers and need help on the following:
I have a hourly table that inserts new rows every hour but I need to either Insert or Update the daily table with the sum of the reading from the hourly table. If a row exist in the daily table with the date of the hourly table, then I need to update this row but if it doesn't exist, I need to insert this row.
