Integration Services :: For Each Loop - Place Full Set Of Values For Every Date In The Year
Jun 15, 2015
I have a table with 3000 values and What I need to do is place a full set of these values for every date in the year 2015. How to achieve this through SSIS?I know we can achieve through SQL using while loop.
EG: 1-1-2015 a b c d
1-2-2015 a b c d like wise 12-31-2015 a b c d .
I am trying to load previous days data at 3 am via a SSIS job.
The Date variable is initiated as DATEADD("dd",-1, GETDATE()) in the for loop.
Now, as this job runs at 3 am, and I set the variable as GETDATE() - 1, it excluded the data from 12 am to 3 am in the resultset as Date is set as YYYY-MM-DD 03:00:00:000 I need this to be set as YYYY-MM-DD 00:00:00:000
how to get sumofshares (#tab1) and TotalOutStanding(#tab2) summ up with these values,
MasterKey (#tab1) and IssueKey (#tab2) are like primary key and foreign key
so the request is
need to calculate, sumofshares (#tab1) and TotalOutStanding(#tab2) as below
1)ShareBenefist = U and year( request_dat) in (2012 , 2103) and (Name for 2012 should match with 2013 name and 2012 Acctno should match with 2013 accounno) in (#tab1) then '2012 and 2013 accts UN Veriverted' 2)ShareBenefist = V and year( request_dat) in (2012 , 2103) and (Name for 2012 should match with 2013 name and 2012 Acctno should match with 2013 accounno) in (#tab1) then '2012 and 2013 accts Veriverted' 3)ShareBenefist = N and year( request_dat) in (2012 , 2103) and (Name for 2012 should match with 2013 name and 2012 Acctno should match with 2013 accounno) in (#tab1) then '2012 and 2013 accts NONVERT' 4)year( request_dat) =2102 and Name and Acctno not match with 2013 account name and acctno (#tab1) then '2012 last year accounts' 5)year( request_dat) = 2013 and Name and Acctno not match with 2013 account name and acctno (#tab1) then '2012 This year accounts'
for ex 1) the below accounts in #tab1 has both 2012 and 2013 and acctno same in both years and name is same in both years so it is condired as
insert into #tab1 values (1012, 100,'Tom',800, '08/22/2013')
for ex 2)
insert into #tab1 values (1013, 101,'Bat',550, '09/15/2013')
for ex 4) 2012 records there is not match acctno and name in 2013 recods
insert into #tab1 values (1002, 102,'Kit', 1600, '06/12/2012')
for ex 5) 2013 records there is no match of name and acct no with 2012 records
insert into #tab1 values (1010, 104,'Sim',200, '04/21/2013') insert into #tab1 values (1014, 100,'Pet',200, '02/21/2013') insert into #tab1 values (1016, 110,'Sun',800, '03/22/2013') insert into #tab1 values (1017, 111,'Bet',550, '12/15/2013')
Expected Results (just for format)
AcctTypeDescription,SumofShares, OtotalutStand '2012 and 2013 accts UN Veriverted',2700,234 '2012 and 2013 accts Veriverted' ,2890,234 '2012 and 2013 accts NONVERT' ,4533,325 '2012 last year accounts' ,2334,567 '2012 This year accounts' ,2222,877
I have a simple FOR EACH loop who's task is to go to a folder, find all .zip files and then extract them to a directory of my choosing. I only want this step to extract files in a particular (root) directory.
What is happening is after the step extracts the main file to the specified output directory, it then goes to the next directory and extracts the files in THAT directory - even though I do NOT have "traverse subfolders" selected.
What is going on here? This has never happened before - at least when I was developing these packages with SQL 2008 R2...
Hello, I'm new at Integration services and I have an excel file with information in several worksheets. I want to loop through some specific sheets to retrieve the data and save it in a database table. I know how to retrieve the data from one sheet, but I don't know how to do it for several sheets. Any ideas?...I would appreciate any help.
I have to import a number of excel spreadsheets. I'm using the classic Foreach Loop inside another Foreach loop approach. The outside loop (Foreach File Enumerator) cycles through the Excel files, while the inside loop (Foreach ADO.NET Schema Rowset Enumerator - ExcelSchema - Tables) to cycle through the individual Excel sheets in each file.
Nothing special there; however, for some reason these excel files have some "phantom" tabs that should not be imported. I call them phanton because they show up as an importable tab in a SSSIS import wizard but actually are not listed in the excel file structure (no, they are not hidden tabs, I checked).
My idea is to use a constraint to NOT import those phanton tabs. The name convention should allow me to do that because the normal tabs have the name 'AAAAAAyyyymmdd$' and the phantom tabs show up as 'AAAAAAyyyymmdd$'_xlnm#_FilterDatabase (the line below was captured from the Local Variable window and show one of the phantom tabs name).
I tried using Len (@[User::WorksheetName]) == 17, which corresponds to the length of the normal tabs name ('AAAAAAyyyymmdd$'). However, it does not work. For some reason the portion of the phantom tab name after the ending single quote (_xlnm#_FilterDatabase) appears to be ignored.
I tested with a number of different expressions, including reversing the variable, to no avail. It seems that internally just the standard name between quotes is what the constraint sees.
I have SQL Server 2012 SSIS. I have Excel source and OLE DB Destination.I have problem with importing CustomerSales column.CustomerSales values like 1000.00,2000.10,3000.30,NotAvailable.So I have decimal values and nvarchar mixed in on Excel column. This is requirement for solution.However SSIS reads only numeric values correctly and nvarchar values are set as Null. Why?
I have to load on SS2012 hundeds of excel files produced by an application over the last five years, during time few columns have been added to the initial set.I created on SS2012 a table to match with the full set of columns and want to load all the files inside the table leaving the missing cells to NULL. I think SSIS can do the job but every trial failed do far.
My package is having .csv file as a source and I kept OLEDB destination to load it.
Stored the .csv file in a shared folder and the exact path is given in Enumerator configuration of the foreach loop container. When I execute my package, it is giving the warning as below:
It is saying that file is not there in the specified path and directory is empty. I am running the SSIS package from TFS. I am sure that I have read and write access for the shared folder for my userID. Is there any access there to pick up this file from path.
I have used for-each loop container for loading excel sheet contains multiple sheets with same structure. It is loading data into SQL table even there is no data in sheets.
I use a ForEach Loop Container in a ssis Package. The package has to look up in the directory 'f:ackups' for backupfiles and copy them into another folder.In my development environment it works fine. But if I run it on the SQL-Server with the SQL-Server Agent, the package logs always that the folder ist empty.Unfortunately the message is always 'empty folder' even if I define 'f:labla' as folder that actually not exists!
As filespecification I tried both *.* and *.bak .My assumption is, that the SQL-Server agent has not enough rights for that folder. But on the other side the agent is able to create backup-files in this folder.The SQL-Server Agent works under netservice control.
I have a requirement to load multiple flat files in target table .
I have created the package which used to load files into target table using For each loop container.
But now requirement has been changed now I have to take only those files from table where status="Success" and max JobId. By the query I am to get those records which need to load into table.
Below query I am using to get the files which need to load.
select [JobLogKey],[SrcNm],[DestNm] FROM [ConfigRep].[dbo].[JobLog] Where [JobId]= (Select Max(cast([JobId] as Int)) Jobid FROM [ConfigRep].[dbo].[JobLog] Where [JobStat]='Success')
I have to load using above 2 files which are under SrcNm. I have created one variable called FileToLoad as Object and mapping to result set of above query. I have create JobId,SrcNm and DestNm variable to catch the record at every loop. I have created 2 For each Loop container
Below screen shot of outer Foreach loop. Till here Its working fine. Inner for each loop container not executing any task under that. How to get it done.
I have a for each loop(ADO Enumerator) container which executes for each Advertiserid which is coming from database. In for each loop I have to create a new excel file with the advertiser name. So if the loop executes 7 times there should be seven excel spreadsheets with seven advertiser names.
How can i create an excel dynamically in the foreach loop container.
In my SSIS package I am using Foreach loopcontainer to load multiple flat files.
Now my requirement is that I want to load only those file which contains %vendor%.In source folder I have many files but I am interested in to load only those file which contains the string %vendor% in file name.
I am using a lookup and full cache, occasionally i get this warning:[Lookup [150]] Warning: The component "Lookup" (150) encountered duplicate reference key values when caching reference data. This error occurs in Full Cache mode only. Either remove the duplicate key values, or change the cache mode to PARTIAL or NO_CACHE. Now I know it is only a warning but it is highlighting a real issue.Is there a way of capturing that this has happened?
When the SSISDB database is created, it appears to be using the "Full" recovery model by default. Because of the recovery model, the SSISDB transaction log needs to be regularly backed up or I risk running out of disk space.I would like to set the recovery model to "Simple", so that I do not need to worry about the transaction log consuming too much space. However, I am not sure what the consequences of that action are.features lost by switching the recovery model of the SSISDB database from "Full" to "Simple"?
I am having a challenge to pass the filename variable from SSIS Foreach Loop Container to SQL store procedure. I have an "Execute SQL Task" inside "Foreach Loop Container" which will receive the input filename parameter passed by the Foreach Loop Container. The store procedure command line is defined as "EXEC sp_mySQLStoreProcedure ?" within the "Execute SQL Task". The Foreach loop container will gather the filenames from File System then put it in the filename variable one by one. I would like to pass the filename variable as the input parameter to the sp_mySQLStoreProcedure in the "Execute SQL Task". How can I connect the variable and the store procedure so that it will process all the input files gathered by the Foreach Loop Container?
In order to update an Oracle table target from a SQL Server table source I need to use a Foreach Loop Container, so I can loop on the rows of the SQL Server table source. This source table has two columns: the old identifier to update and the new identifier to apply. I must use the value of the old identifier to filter the Oracle rows to update, while the new identifier is the new value to assign to the filtered old identifier.
I already know how to use the Foreach Loop Container when it is necessary to loop on an unique column of a table/view (using an object variable, using a Foreach ADO enumerator, etc.), but I need to loop on two columns.
I am trying to use one dataset rather than two and was hoping to then filter the data via a table or matrix.
This is my dataset
SELECT Practice.ibvStaffCategorisation.StaffId ,SUM(Practice.ibvStaffTotalsCL2Y.ChargeableMinutes) AS Sum_ChargeableMinutes ,SUM(Practice.ibvStaffTotalsCL2Y.NonChargeableMinutes) AS Sum_NonChargeableMinutes ,SUM(Practice.ibvStaffTotalsCL2Y.ChargeableAmount) AS Sum_ChargeableAmount ,SUM(Practice.ibvStaffTotalsCL2Y.NonChargeableAmount) AS Sum_NonChargeableAmount ,Practice.ibvStaffTotalsCL2Y.Period
[code]....
I would like to display two rows of data for each StaffId one representing the current period and the other all periods to date so the table would look something like below.
The above shows two separate StaffId figures the first line for each shows non chargeable and chargeable for the current period and the second line a total of all periods in that year.
I have managed to get the first row to display only figures from the current period by using a filter however it also applies the same filter to the second row in the group. I have also tried to group the rows but am drawing a blank.
I have a SSRS report developed in Visual Studio 2013 and using SQL server 2012. It has a date control based on parameters which works correctly in the development environment. I can select by day AND I can move from date to date by clicking on the month name to be able to move by month or double clicking to be able to move by year.
When the report is deployed to Internet Explorer 11 or Firefox I can only, click back and forward by one day at a time and I can not double click the date control to move by month or double click to move by year. I can type the dates into the parameter box and get the correct result. I have set the compatibility view settings in IE for my server.
How to show the CurrentMonthanddateandyear in my report header in ssrs?
1.How to show the currentdateandMonthyear exmple date format like June 29 2015 on my report header.
2.How to change the report rdl name with the same name like EmpUpdatedreportJune 29 2015.rdl ,it is possible to create and change the rdl file name with the current dateandmonth.
I have a table called Table1 where I have five fields like Tableid, Processigndate, Amount, remainingCollectonCount and Frequency. All total I have more than 5Lacs records.
Now I need to fill up another table Called FutuecashFlow taking the records from Table1. There will be also five Columns like FutureCashflowid, Table1id, Processigndate, Amount.
Now the condition is that if the remainingCollectonCount =6 and the frequency is 12 then there will be the 6 entries in the futurecasflow table where the prcessign datae wille be addeed by 1 month.
For example Table1 Tableid, Processigndate Amount remainingCollectonCount Frequency 1 2014-02-15 48 8 12
the future cash flow table the prcessing date column will be shown in the following way
I have an SSIS package that imports data from an Excel file, replaces any value in Excel that reads "NULL" to "", then writes the data to a couple of databases.
What I have discovered today, is I have two columns of dates, an admit date and discharge date column, and what I need to do is anywhere I have a null value in the discharge date column, I have to replace it with the value in the admit date column.
I have searched around online and tried a few things using the Replace funtion in Derived columns but no dice so far.
I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:
What I want to accomplish:
I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.
For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.
I'm currently loading a package that does a lookup on a column of data type nvarchar(4).The values itself are (A+, A, B+, B, C, D, /). The strange lookup behaviour is happening for each of the cases, so it's not related to a specific value. After trying to put the cache on NO CACHE, the lookup works perfectly. When using the default FULL CACHE the strange behaviour happens. Could it be related to the data type? I have not yet tried to use a CHAR instead of a NVARCHAR but it looks like people have similar issues using CHAR.