Integration Services :: Getting Error While Execute SSIS Package From Console Application
Apr 23, 2015
SSIS package working fine directly.I got following error while execute SSIS package from C# console application.
The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]" in the connection manager collection of "OLE DB Destination".
Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
OLE DB Destination failed validation and returned error code 0xC004800B. One or more component failed validation. There were errors during task validation.
How to execute ssis package from command prompt and also pass configuration file to it and set logging to ssis log provider for sql server. Writing all those options with cmd.
I have created for each container to call all the packages in a folder like below, also created a variable.
Then I add execute package task inside of foreach container and selected file system in a location and in connection called currently creating package name finally in connection properties i added variable in expression which i created and mapped into for each loop container. I referred below link
[URL] ....
All the packages are running but its not ending once all the packages executed its re run and continue the running process, how to stop once all the packages execute.
I have added reffrence for DTS Run time (using Microsoft.SqlServer.Dts.Runtime;)
But I am getting an Error like this
Error 1 'Application' is an ambiguous reference between 'System.Windows.Forms.Application' and 'Microsoft.SqlServer.Dts.Runtime.Application' C:Documents and Settingsvahqmd10My DocumentsVisual Studio 2005ProjectsWindowsApplication1WindowsApplication1Form1.cs 23 17 WindowsApplication1
Error 2 'Application' is an ambiguous reference between 'System.Windows.Forms.Application' and 'Microsoft.SqlServer.Dts.Runtime.Application' C:Documents and Settingsvahqmd10My DocumentsVisual Studio 2005ProjectsWindowsApplication1WindowsApplication1Form1.cs 23 39 WindowsApplication1
Error 3 The type 'System.Windows.Forms.Application' has no constructors defined C:Documents and Settingsvahqmd10My DocumentsVisual Studio 2005ProjectsWindowsApplication1WindowsApplication1Form1.cs 23 35 WindowsApplication1
// IDataReader 'ın buradaki gerçekleştirimi diğer dataReader 'lardan farklı. Kayıtlar okunurken son kayıt okunmasına rağmen // read() metodu bir kez daha true dönüyor ve kayıt sayısı + 1 tane okuma yapılıyor. Yapılan son okuma da istisna fırlatıyor. try { dataTable.Load(dataReader); } catch (ApplicationException ae) {
return dataTable; } However it always fails after I publish the asp.net 2.0 application to our Win 2003 Server. I also copied the configuration and dtsx file to proper location on the server.
I can use dtexec to execute the package without any problem on the same location. But when called from the application, the package fails to validate.
I have a SSIS package that I want users to be able to execute by clicking a button on an a web page. The package does not require any parameters to be passed to it. Previously I've executed DTS packages without any problems but after a fair bit of investigation and trawling the net I've not found a way to do this successfully with SSIS. Some code I've tried - Dim app As New Application() ' ' Load package from file system ' Dim package As Package = app.LoadPackage("c:ssisPackage.dtsx", Nothing)
'package.ImportConfigurationFile("c:ExamplePackage.dtsConfig") 'Dim vars As Variables = package.Variables 'vars("MyVariable").Value = "value from c#"
Dim result As DTSExecResult = package.Execute()
lblResult.Text = "Package Execution results: {0} " & result.ToString() All I get is a message 'Failure'. Does anyone have an example of how to do this?
We have a main package which is calling multiple other packages. The the child packages uses parent package variables and which we are configuring using configuration file while installation of the package. Here we need to set each path while installation because there are many variables using the same path with the different file names(Different files stored in same Folder). We want to get the main path and then if we use relative path in other variables then we need not to assign all the variable paths while installation.
How to we can get the Application path in Integration Services Package(Script Task)?
I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.
Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).
The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.
I have tried to incorporate 638 lines sql code inside the Execute SQL Task editor. But it is truncating the codes inside the Execute SQL Task (SQL command) in SSIS.write all 639 lines of codes in the Execute SQL Task Editor in SSIS.
I want to achieve the following in (SSIS/SSDT for SQL 2012) -
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
I have an execute process task set up to run ftp.exe and a script argument. The ftp.exe is referenced in the executable field without a qualified path. The package just seems to know it's there relatively. I need to change this to run a secured ftp executable that I recently installed on my pc. I put the new executable in the WindowsSystem32 folder where the old ftp.exe is stored. But when I put the new executable in the executable field, it says the 'File/Process "FTPS.exe" is not in path'. I get the same error when I fully qualify the path. Is there something I need to do with the new executable for SSIS to pick it up without having to fully qualify the path?
I have a requirement in which i have to create a custom .net class library for Ex:-I retrieve password(s) from a thrid party component. Below is what i am doing.
(1) Created a custom class library which reads a custom .xml file from a drive Ex:- "D:MyAppMYAppCofig.xml" and sets to my properties of my custom class library and inside it i created an instance of third party component's class and passed these values. Since i need to use this .net custom class library both in web and ssis/database side i am using this custom .xml file.
(2) After validating passed data (properties set in custom .net class library) the thrid party component instance object created in my custom .net class libraty returs a password to me own custom .net class libray.
(3) This password I use in my web app for connecting to database. This code is working fine.
(4) My question is how to execute a custom .net class library code through ssis and to use the my same custom .net class library and pass the password to my SSIS component / taks so that that code block also uses the returned password to connect and do any needed tasks? In other words how to use custom .net class library from SSIS.
My Environment is as follows:- SQL Server is : 2008 R2 VS.NET 2013
I am using SSIS integration between two database. Both databases are sql server 2008. using many integration but getting problem in two only only two integration giving problem, both are executing perfectly and out put also not showing any error.
but destination table not inserted/updated anything.
first issue integration is using data flow task with oledb source and destination. second one is using execute task with for-eachloop container.
We are building a dataload application where parameters are store in a table. And there are multiple packages for each load.There is a column IsChecked column if it is 1 then only the child package should execute.Created a master package. In which i have taken execute SQL task in that storing a results in variable and based on the result the child package should execute. But In executesql task i selected result set as full result set. I am getting the below error.
[Execute SQL Task] Error: Executing the query "SELECT isnull(ID ,0) AS ID FROM DataLoadParameter..." failed with the following error: "The type of the value (DBNull) being assigned to variable "User::LoadValue" differs from the current variable type (Int32). Variables may not change type during execution. Variable types are strict, except for variables of type Object.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Win 7 SP1 x64 PC. I installed SQL Server 2014 Dev Edition + Visual Studio 2015.
I'd like to create some basic ETL SSIS packages, and I worked very comfortably in 2008R2.
For 2014, I started with this tutorial:[URL]However, it says to go to Start->All Programs->Microsoft SQL Server->SQL Server Data Tools.
I did explicitly install SSDT when I installed VS2015. I also installed it separately. I see SSDT listed in Programs, and SSIS is running according to SQL Server Config Manager, and Services. Half of Microsoft's docs seem to be 2012 era, which is a shame because 2014 is out and it's nearly 2016...
how do I get to the GUI where I can design ETL packages?
The attached image below shows the steps and its set up to fail if not successful.However there was a metadata validation issue in step one (underlying database field had changed), yet the job kept emailing stating it was successful.It appears to have just carried on with the other steps despite step one failing.
Create a SSIS package for following scenario.I have one excel file which will contain 10 records for Monday, 12 records for Tuesday, 7 on Wed, no records on Thursday so if records are there I get mail if no records are there I didn't get mail daily.
I am using SSIS 2012 to dynamically backup stored procedures on a list of Servers and Databases.Here are the steps in my package,
1. Execute SQL Task: Captures a result set (configured to save the data set in an Object variable) with all the Servers and Databases on which stored procedures exist.
2. For each loop that is configured to get each each row(server name @[User::Server_Name] and databases name @[User::DataBase_Name]) from the object variable (@[User::Connection_Strings])and pass it to a connection manager that has an expression for servername and database name.
2a) Within the for each loop, i have an execute process task that is configured as
i) Executable: C:WindowsSystem32WindowsPowerShellv1.0powershell.exe ii) Arguments: Configured this to fetch value from an expression. The expression i am using is,'C:batch - CopyPowerShell Scripts to Backup Stored ProceduresScriptOutSPs.ps1' -$Server_Name "+ @[User::Server_Name]+ " -$Database_Name "+ @[User::DataBase_Name]
Note: @[User::Server_Name] is the Servername from object variable and so is @[User::DataBase_Name] for database name . The execute task is to run a command line that triggers a powershell script with parameters. Here is the powershell script that i am using,
When i execute the script, by passing parameters from arguments, it executes successfully but nothing happens. Passing wrong arguments in the expression?
We have 6 SSIS packages which populates different sets of table by reading different set of excel file.We need to have a master SSIS package which will have the configuration (say xml) which consists of database connection details and file path details of child packages.what will the best way to achieve the desire results.
Package 1 use File x package 2 use File y package 3 use File z .... package 6 use File a
The parent ssis package will have xml file as configuration which will store the all the six different file details for child packages along with database connection string.Is the above option feasible . or what approach will be the best possible way to achieve the results.Since the Triggering of SSIS package (Master SSIS package) will be from SQL Job
I am new to SSIS. I have a requirement that from a flat file need to import the data into SQL Server DB(SQl Server2008r2).
1.When the file doesn't found in dir need to send a mail. 2.error reading And writing ,on which record the error occurred and capture the error details and need to send mail. 3. In success also need to send a mail.
I have created a package using SSDT2012 studio and it is failed to deploy under sql server 2012 sp1.Data inserting into sharepoint from sql server 2008 r2 database.The error says:The package failed to load due to error 0xC0010014.
I have a table is SQL server database A that is my source. I have another database B which is accessed via webservice call.(its a CRM server basically). My intention is to transfer data from A to B while B is accessible only via web service. I need to update existing one and create the missing one.
Currently I am using script component, and on every insertion of a row, i call the webservice to check if the record exist or not. If it exist I update it else create it using webservice call itself.
All this happen in Input0_ProcessInputRow(Input0Buffer Row) function.
Now this method is making 2n webserive call which is making the performance very slow.
I want to optimize the approach. Is there a way where I can retrieve whole set of rows in source table in preexecute(), filter it and store it in a List. This way, i just need to check the list a perform update ro create accordingly preventing my webservice call.
How to optimize this or even some better approach?
Its actually a CRM server and I am trying to update and create contacts in CRM sync with a database.
