Integration Services :: SSIS Execute Multiple Packages Based On Conditional Split
Sep 4, 2015
We are building a dataload application where parameters are store in a table. And there are multiple packages for each load.There is a column IsChecked column if it is 1 then only the child package should execute.Created a master package. In which i have taken execute SQL task in that storing a results in variable and based on the result the child package should execute. But In executesql task i selected result set as full result set. I am getting the below error.
[Execute SQL Task] Error: Executing the query "SELECT isnull(ID ,0) AS ID FROM DataLoadParameter..." failed with the following error: "The type of the value (DBNull) being assigned to variable "User::LoadValue" differs from the current variable type (Int32). Variables may not change type during execution. Variable types are strict, except for variables of type Object.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
View 3 Replies
ADVERTISEMENT
Apr 22, 2015
We manage some SSIS servers, which has only SSIS and SSIS tools installed on them and not the sql server DB.
SSIS packages and configuration files are deployed on a NAS. We run the SSIS packages through DTEXEC by logging in to the server.
We want to allow developers to run their packages on their own on the server, but at the same time we dont want to give them physical access on the server i.e we do not want to add them into RDP users list on server properties. We want them to allow running their packages remotely on the server.
One way We could think of is by using powershell remoting and we are working on that. But is there any other way or any tool already present for the same.
View 4 Replies
View Related
Aug 24, 2015
I am importing the values for field Atype from a .csv file as DT_STR, 13 and I need to fit them into a bit type CType field.
When I write the conditional split ((ISNULL(Atype)?"a":Atype)!=(ISNULL(CType)?"9":CType)) it says that the DT_WSTR and DT_I4 types are incompatible and that I need to explicitly cast with a cast operator. I haven't been able to make it work, how to explicitly cast?
View 4 Replies
View Related
May 18, 2015
i am creating ssis packages with condition split . condition is SUBSTRING(EnglishProductName,1,1) == "A". pacakge is successfully executived but data is not move to condition split transformer to oldeb destinations. it not showing any error.
View 3 Replies
View Related
Oct 14, 2008
I'm pretty new to SSIS but I've managed to cobble together a number of individual packages to refresh SQL tables from a 3rd-party database.
Now, what I'd like to do is have a single package that I can use to invoke each of the individual ones. Since it will run on a quad, I'd like to invoke them such they'll run in parallel.
View 2 Replies
View Related
Jun 10, 2015
Import.csv file looks like,
TABLE_NAME DESC CODE
tab1 table1 A
tab1 table1 B
tab1 table1 C
tab2 table2 D
tab2 table2 E
tab2 table2 G...
First column values are table names which are already exists in target database. Next two columns[Desc],[Code] data gets populate from CSV file to table.
In this scenario, how to load tab1 data into the same table in destination and so on.
Which way will be more standard to accomplish this task? If its a script task using C#, looking for clear script to identify a value changes in the first column.
View 4 Replies
View Related
Jun 26, 2015
I have created for each container to call all the packages in a folder like below, also created a variable.
Then I add execute package task inside of foreach container and selected file system in a location and in connection called currently creating package name finally in connection properties i added variable in expression which i created and mapped into for each loop container. I referred below link
[URL] ....
All the packages are running but its not ending once all the packages executed its re run and continue the running process, how to stop once all the packages execute.
View 24 Replies
View Related
Oct 12, 2014
I have one scenario
Table
Col1. Col2
1. A,b,c,df,ghf
2. C,b
3. B
Output should be
Col1. Col2
1. A
1. B
1. C
1. Df
1. Ghf
2. C
2. B
3. B
View 9 Replies
View Related
Sep 30, 2015
I have a delimited text file with 650+ columns. The sum of the column lengths of a single row, if fully populated, exceeds 30K bytes. The "killer" fields lengthwise are the "Description" fields. If they were removed from the input file, the remainig columns would occupy about 5000 bytes, which is within SQL max row length.
Can SSIS be used to created these two tables? (one without description fields, the other with those field but arranged vertically in the table rows).
The fundamental issue is I can not import a single file row into a sql table because that row length could exceed the max byte count for a row.
View 8 Replies
View Related
Oct 29, 2015
I'm trying to write a conditional split where I want to bring in only records where the date is less than today, but my problem is that I can't simply do this Column < GetDate() because if something comes in today, it takes the time into account and it will bring that record for today. You can do this in SQL, but I'm not sure how to do that in SSIS
SELECTCAST(CONVERT(char(8),GetDate(),112)ASdatetime)
View 2 Replies
View Related
May 22, 2015
I have a field 'IsActive' which is bit type either 1 or 0. And in my package, the conditional split must be set something like
IsActive==0
And throws exception that condition evaluated as NULL where Boolean was expected. How i can make this work?
View 8 Replies
View Related
Aug 12, 2015
I'm encountering a very peculiar situation when I'm trying to compare source and target data using conditional split. Following is the Data Flow and how I'm trying to achieve this.
Source Data : Col_A (PK) Col_2
1 100
8 500
Target Data : Col_A (PK) Col_2
1 100
3 700
8 500
Look-up Target on Col_A to check for existing records. Now we have four columns in Look-up match output: Col_A, Col_B, Lkp_Col_A (Target Col), Lkp_Col_B (Target Col).
Conditional Split: Compare Col_B with Lkp_Col_B
Update target if there is any change in the existing value of Col_B.When I'm running the package for every record in source, the conditional split fails and even when there is no change in Col_B, some of the records (Not all and quite randomly) get updated with the same value. If I run the package for few records, it works absolutely fine.
View 8 Replies
View Related
May 8, 2015
I have a Problem with my destinations. I have a split condition with two ways the flow can use.
In this case: all and Date.
All and Date can be set by using a variable. Its working good.
When a user fills the variable with a date value (cast to string) the conditional split executes the correct flow with all the needed rows... The same time the all flow will be executed with 0 rows. In the end the destionation file for the all values will be overwritten with nothing. The same on the other hand when a user fills the variable with the all value, the date file is empty. What can i do to make sure that the files are not empty?
View 2 Replies
View Related
May 4, 2015
I have 12 packages to execute in order. I made a table in my DB where i mentioned the name of each package and his order in execution.
I want to create a master package that get the name and order from my DB table to execute all packages.
View 3 Replies
View Related
Oct 27, 2015
I have 100 packages all of them stored in "Integration services catalog". Is there a way to execute packages using script task in ssis 2012.
View 5 Replies
View Related
May 21, 2015
I was to split each record into multiple columns. The problem is some records need to be split into only 1 column, others may need to be split into more. Also need to remove the "/"'s. This is all dependent on where a "/" is found. Been beating my head for a while and getting nowhere.
So:
create table #foo (myPK int, c1 nvarchar(425))
insert into #foo values (1,'/folder1')
insert into #foo values (2,'/lvl1/folder2')
insert into #foo values (3,'/folder1/lvl2/folder3')
insert into #foo values (4,'/f1/folder2/lvl3/fldr4')
Should return as:
folder1
lvl1
folder2
folder1
lvl2
folder3
f1
folder2
lvl3
fldr4
View 10 Replies
View Related
Dec 3, 2015
I have 5-6 table and wanna to make sure if I'm using any of them in my Packages and I do have 100 Packages.shortest way to search these tables in Packages.
View 2 Replies
View Related
Jun 10, 2015
I have a table that I am using in a package to create an extract from. In that table is an address field called "Street" that is 255 characters in length. My table also has 3 additional fields called address_1, address_2 and address_3 that are each 50 characters in length because that is the requirement for my extract. I need to split the address field up in such a way that if it is longer than 50 characters, it backs up to the first space in the address prior to character #50, puts that info in street1, then from that cut off point used in street1, puts the next 50 up to the prior blank space in street2, then the remainder in street3. Where the extract will be used only has three 50 character fields so if the data runs more than 150 characters, the street3 data will just have to be truncated. No way around that, but I don't anticipate any address getting close to that long. Although doing such a split would be much easier using SQL, the solution requirement is that it be done in the package, not using SQL to do so.
I'm assuming I need to use a "derived column transformation" in my data flow. But, I can't figure out how to do what I need to do with a derived column transformation.
Example of info in an address:
123 Chicamauga Avenue South, Across the Street from International Center Square, Apartment Number 17650 Tokiwa-machi Machida
position 1-50:
123 Chicamauga Avenue South, Across the Street fro
Therefore, Street1 would need to get:
123 Chicamauga Avenue South, Across the Street
[code]....
View 5 Replies
View Related
Aug 28, 2007
Need some help...
When we tried to run mulitple packages one after the other from a windows service, first one succeeds but later ones are throwing below error :
"The script threw an exception: The element cannot be found in a collection. This error happens when you try to retrieve an element from a collection on a container during execution of the package and the element is not there.
A deadlock was detected while trying to lock variable "System:ackageName, User::BusinessDate, User::Environment, User:ortfolioName" for read access. A lock could not be acquired after 16 attempts and timed out."
Later, we tried to create separate AppDomains for each package and execute via console application, but ended up with below error (The below expressions were defined in OnError Event) :
"The result of the expression "@[User::ReportErrorFrom]" on property "FromLine" cannot be written to the property. The expression was evaluated, but cannot be set on the property.
The result of the expression ""Error At :" + @[System:ourceName] + "" +
"Error Description : "+ @[System::ErrorDescription] + "" " on property "MessageSource" cannot be written to the property. The expression was evaluated, but cannot be set on the property."
At last, we tried to span a separate process (System.Diagnostics.Process) for each package. this seems working but taking very long time:
A package that normally takes 2 min, is taking 60 min.
We also tried creating an SSIS Package that executes mulitple packages. But only first package is getting executed, and second one is throwing below error (Here the variable it is trying to lock is of first package):
"Failed to lock variable "UniqueInstrumentsQuery1" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
Please help us with some work around for this. Thanking you in advance,
View 17 Replies
View Related
Nov 10, 2010
What is the best way of documenting SSIS packages?I am not interested in purchasing any software, any general template that covers the key information of any SSIS package that should be defined and documented.
View 5 Replies
View Related
Sep 23, 2007
Hi,
I have the following table in MsAccess
EmployeesA
empId integer,
empName varchar(60),
empAge integer,
empStatus char(1) - can be N,D or S - New, Deleted or Shifted
and the following in Sql2005
EmployeesB
Id smallint,
Name varchar(60),
Age int,
Status char(1) - Bydefault 'N'
I have written a Foreach File package that populates the sql server tables (EmployeesB) from Access(EmployeesA). However i want to check for a condition now.
If empStatus = N in EmployeesA, then insert a new record in EmployeesB
If empStatus = D in EmployeesA, then search for that field in the EmployeesB by passing empname and age and if found, mark the Status field in EmployeesB as 'D'
If empStatus = S in EmployeesA, then search for that field in the EmployeesB by passing empname and age and if found, mark the Status as 'S' in EmployeesB and insert a new row.
How do I do it for each table each row in EmployeesA using a foreach file loop?
Thanks,
lolsron
View 6 Replies
View Related
Jun 18, 2015
I have a MASTER package containing multiple packages using execute package task in SSIS.When am running this MASTER Package in Sql server agent in SSMS, am getting error as below.
steps how to run this and let me know what information am missing to run the Master package.
ERROR :Failed to decrypt protected XML node “DTS: Password” with error 0x8009000B “Keynot valid for use in specified state”. You may not be authorized to access this information.
This error occurs when there is cryptographic error. Verify that the correct key is available.
View 2 Replies
View Related
Jun 29, 2015
How to split excel workbook into individual sheets using SSIS 2008 without using " Microsoft.Office.Interop.Excel"
The Workbook need to be broken into multiple sheets available in the workbook.
The SSIS package will read the excel workbook and split into individual sheet and rename the sheet with the name available in the workbook..
View 6 Replies
View Related
Apr 25, 2015
IN SSIS...
1.---->I have a sales table country wise regions like (india, usa, srilanka) ....
india usa
srilanka
a b
c
d e
f
So I want output like in
flat file1.txt has india flat file2.txt has usa flat file3.txt has srilanka
a b
c
d e
f
2.----->I dont know how many regions in my table....dynamically split into separate flat files ....
View 2 Replies
View Related
Jun 12, 2015
I am currently moving everything from SQL Server 2005 SP2 to SQL Server 2012. I have a method for getting users, logins, roles and SQL jobs. But I also have to get copy all of the SSIS packages from 2005 to 2012. I know I can go to the 2012 SQL Server and click on the MSDN folder and choose import. However, this only enables me to import one package at a time. I have 95 packages. Is there a way to get them all from the 2005 SQL Server to the 2012 SQL Server in one shot? I am not a SQL developer nor am I a DBA but I have been assigned this task.
View 5 Replies
View Related
May 19, 2015
I have a SSIS package that needs to run before another SSIS package.
At the moment I have deployed it to the SSISDB, and have set up parameters to enable it run on the right server.
I have not yet experimented with SQL Agent yet, but based on what I have read, it is not possible to do so.
What is the best way to schedule these 2 jobs to run one after the other on a periodic basis using the correct environment and variables set up?
I thought about importing one package into the other, but this creates a copy and any changes to the original will not be replicated.
View 7 Replies
View Related
Jun 1, 2015
Any script in ssis 2012 packages deployment and create the jobs though power shell script.
View 3 Replies
View Related
Sep 5, 2007
This is probably an easy question, and I just can't find the solution. I've searched extensively, but I am probably just not searching for exactly what I need.
Basically, I have a Conditional Split. What I need to do is for each row coming out of my split, I need to SELECT some data from another database based on one of the fields and then place the data from the DB into a file for later processing.
Seems pretty simple, considering the power of SSIS. Using tools such as OLE DB Command didn't help - the data that comes out of the OLE DB Command is the input data, not the data returned by the command.
How can I do this?
Thank you!
Nolan
View 1 Replies
View Related
May 1, 2015
I have around 500 packages (SQL 2005) deployed in file system & all this packages are running on daily basis via SQL agent. Now I need to migrated all 500 packages into SQL server 2008 R2.
There is no inventory to track which package belogs to which team and any other information.
Now, I need a method to query the pakages connection string details with database respective. Is there any method?
View 2 Replies
View Related
Aug 8, 2013
How to pass variable from Parent to child and child to Parent Packages is this possible in SQL SSIS 2012. I need this only in SSIS 2012 ...
View 6 Replies
View Related
Aug 10, 2015
Here is my requirement, How to handle using SSIS.
My flatfile will have multiple columns like :
ID key1 key2 key3 key 4
I have SP which accept 3 parameters ID, Key, Date
NOTE: Key is the coulm name from the Excel. So my sp call look like
sp_insert ID, Key1, date
sp_insert ID, Key2,date
sp_insert ID, Key3,date
View 7 Replies
View Related
Jun 16, 2015
I have a requirement where in i have around 15 different flat files , filenames are fixed but folder path can be changed(i think i should use a variable for folder path). These 15 files data should go to their respective tables in the database.
Whether I need to create separate data flow task for each file or separate package? In addition to these, example : while importing product data into product table, if product ID already exists, we need to ignore it and upload only the new records.
View 4 Replies
View Related
Aug 25, 2015
I have an excel file that has multiple sheets and I need to import data from each separate sheet to a separate table using SSIS.
E.g. Sheet A data should go to Table A and Sheet B data should go to Table B and so on. Is it possible to do this with out using script task.
View 6 Replies
View Related
