Integration Services :: Illegal Characters In Command Line On Execute Process Task Editor

Aug 26, 2015

I'm trying to execute a simple VBS file from the Executable command line in the Execute Process Task Editor.

My line is this : cscript.exe "c:convertcsvssisXlsToCsv.vbs"

SSIS keeps saying there are illegal characters here.  I've Googled and looked about 20 articles and I can't resolve it.

I have a ForEach that loops through Excel files and changes them to CSV files using code i found. This script takes an original Excel file and transfers it to a new CSV file in a new directory.

So in DOS at the CMD line I would type : XlsTocsv.vbs originalfile.xls newfile.csv

I have the original file and new file in the Arguments line so I'm assuming that after the script executes it will look at the filepaths in the loop and loop through them so I want it do to this when it runs:

XlsTocsv.vbs [User::@ExcelFile] [User::@CSVFile]

I just can't get it to execute and I keep getting illegal characters.  

View 5 Replies


ADVERTISEMENT

Integration Services :: Execute Process Task Failing

Dec 1, 2015

I have an SSIS package which calls a command line app.When run in BIDS, it executes normally. The command line app is passed the arguments, does what it needs to do.When called as a SQL Agent Job (by the agent, or by me) it fails when calling the app, giving an exit code of 2 (which is an exception trapped by a try-catch). The SQL Agent service is running under my user (it's a test environment). The argument passed (from the log) is valid, and I've run it against the app, it provides the appropriate output.I can't for the life of me figure out what's going wrong.The app is passed an argument of a path and a password, and applies the password to the file, using interop.

View 13 Replies View Related

Integration Services :: Unzip Files Using Execute Process Task

Jul 6, 2015

while i am trying to unzip files using execute process task ,getting below error

[Execute Process Task] Error: In Executing "C:Program Files7-Zip7z.exe" "a -tzip D:excel.zip D:unzipfileexcel.xls" at "", The process exit code was "1" while the expected was "0".

Warning: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED.  The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.

i want to know more about unzip and zip files and folders using execute process task.

zip folder:  C:Program Files7-Zip7z.exe
SQL version: SQL server 2008 R2

do not having win rar so please instruct using 7z.its quite interest to work but i don't know to get desired result.

View 6 Replies View Related

Integration Services :: Using SSIS Execute Process Task To Do Robocopy

May 12, 2015

I am trying to do robocopy of files from one server to another using SSIS package in order to automate and schedule the task.

So, int the Execute Process task editor I put the following

Executable: C:WindowsSystem32Robocopy.exe
Arguments: robocopy SourceServerNameE$BackupTestSource DestinationServerNameE$BackupTestDest
TestSource and TestDest are folder names,

And I want all the files in the source folder to be copied to the destination folder.

I am getting this error when I execute the task: The process exit code was "16" while the expected was "0"

View 6 Replies View Related

Integration Services :: Pass Parameters To SSIS Execute Process Task?

Nov 3, 2015

Got a powershell script to split a large XML file to split in smaller chunks. I have Execute ProcessTask in SSIS with: 

Executable: %windir%system32WindowsPowerShellv1.0powershell.exe

argument: -ExecutionPolicy ByPass -command ". 'C:WorkspacesSplitToytPMFile.ps1'"

I need to pass File Name as parameter to the PS script. I tried using the StandardInputVariable but it doesn't work. 

View 11 Replies View Related

Integration Services :: SSIS Execute Process Task Executable Not Found

Jul 10, 2015

I have an execute process task set up to run ftp.exe and a script argument.  The ftp.exe is referenced in the executable field without a qualified path.  The package just seems to know it's there relatively.  I need to change this to run a secured ftp executable that I recently installed on my pc.  I put the new executable in the WindowsSystem32 folder where the old ftp.exe is stored.  But when I put the new executable in the executable field, it says the 'File/Process "FTPS.exe" is not in path'.  I get the same error when I fully qualify the path.  Is there something I need to do with the new executable for SSIS to pick it up without having to fully qualify the path?

View 8 Replies View Related

Integration Services :: Execute Process Task / Passing In Variables From SSIS To Powershell Script

May 15, 2015

I am using SSIS 2012 to dynamically backup stored procedures on a list of Servers and Databases.Here are the steps in my package,

1. Execute SQL Task: Captures a result set (configured to save the data set in an Object variable) with all the Servers and Databases on which stored procedures exist.

2. For each loop that is configured to get each each row(server name @[User::Server_Name] and databases name @[User::DataBase_Name]) from the object variable (@[User::Connection_Strings])and pass it to a connection manager that has an expression for servername
and database name.

2a)  Within the for each loop, i have an execute process task that is configured as

 i) Executable:  C:WindowsSystem32WindowsPowerShellv1.0powershell.exe
 ii) Arguments:  Configured this to fetch value from an expression. The expression i am using is,'C:batch - CopyPowerShell Scripts to Backup Stored ProceduresScriptOutSPs.ps1' -$Server_Name "+ @[User::Server_Name]+ " -$Database_Name "+ @[User::DataBase_Name]
             
Note:  @[User::Server_Name] is the Servername from object variable and so is @[User::DataBase_Name] for database name . The execute task is to run a command line that triggers a powershell script with parameters. Here is the powershell script that i am using,

param([String]$Server_Name,[String]$Database_Name)
$Server = $Server_Name
$Database = $Database_Name
$savePath = "SalesDepartmentsData ScienceUsersSANDEEP PStoredProcedures_Backup"

[code]...

When i execute the script, by passing parameters from arguments, it executes successfully but nothing happens. Passing wrong arguments in the expression?

View 3 Replies View Related

Best Method For Using FTP Command Xp_cmdshell Or Execute Process Task

Dec 8, 2005

Hi, I need to send a table data into flat and then ftp into different location.
I was using xp_cmdshell via sql task but my network engineer is saying that this xp_cmdshell will break the security and recomond to use "Execute Process Task". If i'm using this task getting the below error.
Could you advice me regrding network engineer thought and any solution for avoiding this error.


---------------------------
Execute Process Task: C:WINDOWSsystem32ftp.exe
---------------------------
CreateProcessTask 'DTSTask_DTSCreateProcessTask_1': Process returned code 2, which does not match the specified SuccessReturnCode of 0.
---------------------------
Thanks,

View 1 Replies View Related

How To Pass Command Line Parms To The Execute Package Task

Oct 2, 2006

I have a ForEachLoop parent pkg that reads thru the file system of dtsx to be executed.

I would like to pass CLI parms to the command itself (dtexec). I'm not looking at passing values to the child pkgs but rather additional command line values such as:

/CONFIGFILE "C:myconfig.dtsConfig.



In my expression builder for the PackageName I added the additional string but during the execution, the reference to my dtsconfig is ignored without any errors and the child pkg runs using the default values provided at design time.

@[User::PackageToRun] + " /CONFIGFILE C:\myconfig.dtsConfig ".



How does one add additional CL values during the runtime for Execute Package Task?



Thanks,

Anatole

View 3 Replies View Related

Integration Services :: Error To Open Script Task Editor

Jun 12, 2015

I am using SSIS 2008 tool for developing ETL package. I get below error whenever I click on script task editor.Cannot show Visual Studio 2008 Tools for Applications editor. (Microsoft Visual Studio).

View 2 Replies View Related

Integration Services :: Stored Procedure In Execute Task Fails But Task Does Not Fail

Jul 1, 2015

I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?

View 3 Replies View Related

Integration Services :: Argument For Option (parameter) Is Not Valid - The Command Line Parameters Are Invalid

May 6, 2015

i am parameterize  my DB connection in sql sever 2012,it showing in agent job as parameter.but when i run job it giving me error:

Argument "" for option "parameter" is not valid.  The command line parameters are invalid.  The step failed.

what i need to do is pass different environment here while deploying to different env.

View 2 Replies View Related

Integration Services :: Execute SSIS Package From Command Prompt

May 28, 2015

How to execute ssis package from command prompt and also pass configuration file to it and set logging to ssis log provider for sql server. Writing all those options with cmd.

View 3 Replies View Related

Integration Services :: SSIS Script Task Component Not Opening Script Editor

Apr 30, 2015

I have VS 2013 installed in my machine with SQL server 2012 ,I have installed Microsoft data tools for VS 2013,In the integration service project  i used script component when i try to pen the script task its not opening VSTA projects ,its simple ideally without any action.I am facing this issue for past 2 months i tried fixing this problem but no use.

The script  task editor has "Access VSTA to write script using VS 2012".So i installed VSTA tools for 2012 and 2013 but no issue.

But the script component works for VS 2010.I have installed Microsoft Visual Studio tools for VS 2012,VS2012 AND VS 2013.

This issue is occurring for VS 2012 and VS 2013.

View 2 Replies View Related

Integration Services :: SSAS Process Task - Change Settings Box Not Visible?

May 17, 2015

I just converted several SSIS packages from SQL Server 2008 to SQL Server 2012. The packages having issues are those that are SSAS process cube tasks.

When editing the tasks in SSDT for SQL 2008, there is "Change Settings" button/option. In SSDT 2012, there is no Change Settings option!

What happened to it? Even when creating new packages, this option is not available.

View 7 Replies View Related

Integration Services :: Appending A Value From Execute Task To Filename?

Jun 28, 2015

This is for SSIS 2008r2. I am generating flat files successfully with a datetime stamp (filename_yyyymmddhhmm). Now I need to append a MAX(FILEDATE) from the file. I have a query to do this, but am not sure about two things:

1) Is it advised to put the query in a Script Task (with db conn and so forth) or is it better to put it in an Execute SQL Task? I am thinking the latter but am not 100% sure.

2) How would I pass the result of this query (yyyymm) to the filename. The filename format would be (filename_yyyymm). I am assuming that I would probably need to pass the result into a variable/expression but am not quite sure of the steps involved.

View 4 Replies View Related

Integration Services :: How To Process SSAS 2012 Cube With SSIS 2014 And Script Task

Nov 11, 2015

Now I have a different constellation: Integration Services run on one server, in version 2014, the Analysis Services instance to process the cube database on runs on another server, version 2012.I tried several different combinations of SSIS version and Analysis Management Objects version, and got several errors while running the process package (e.g. object reference not set to an instance of an object, cannot find AnalyisServices.dll..)

Is this combination 2014/2012 possible at all?I assume the BIDS version has to be for SQL Server 2014, as I want to run SSIS packages on a 2014 server, is that correct? Does it matter at all, can I also deploy 2012 packages?Which version of Analysis Management Objects do I have to use? I assumed I have to use version 11.0 here, because I want to process a 2012 cube?If it is possible to use the "old" 11.0 version of AMO, do I have to do anything so that it can be found by the SSIS package running on the server (it was built on my local computer, there I have all SQL Server versions from 2005 to 2014 installed in parallel), or do I just have to copy it to the appropriate SQL Server folder?

View 3 Replies View Related

Integration Services :: SSIS - Can Use Variables In A Data Flow Task Command

Jul 2, 2010

In my SSIS Data Flow Task, I have a query that retrieves data based on a couple of date parameters. Is there a way we can pass/use the Variables defined in the SSIS package in the query ?

(I am assigning values to those variables from C# code)

The query should look like this:

select ordernumber, customerid from salesorder

where statecode=3 and datefulfilled between @variable1 and @variable2

View 8 Replies View Related

Integration Services :: Parameterize TOP Clause Inside Execute Task

Jun 23, 2015

in a SSIS 2012 pkg, I'm trying to specify a SELECT TOP ? myColumn FROM myTable inside an Execute SQL task, but unsuccessfully.Is it possible to parameterize the TOP clause?

View 6 Replies View Related

Integration Services :: How To Capture Execute Task Values In Table

Jun 19, 2015

How to capture execute sql task results.

Example if the execute sql task runs select statment (select * from table)means , how do i capture into  sql table.

View 10 Replies View Related

Integration Services :: Codes Truncating In Execute Task In SSIS

May 7, 2015

I have tried to incorporate 638 lines sql code inside the Execute SQL Task editor. But it is truncating the codes inside the Execute SQL Task  (SQL command) in SSIS.write all 639 lines of codes in the Execute SQL Task Editor in SSIS.

View 7 Replies View Related

Integration Services :: Possible To Get Output Of Execute Task To Excel Destination

Jul 10, 2015

IS that possible to get teh output of a execute sql task to excel destination.I have query which will comapre the  data difference between two databses. It will comapre all tables in both databses and list out the difference in data by each table. I need to run this query using SSIS and need to get the output to a excel sheet...I have used the data flow task to run this query but my query is giving some error when used with data flow task. So i have used excecute sql task and need to write teh out put to a excel sheet.

View 11 Replies View Related

Execute Store Procedure In Informix From Sql Task Integration Services 2005

Dec 21, 2007



hi,
i need execute a store procedure of Informix from sql server integration services.
i use driver IBM informix provider 3.2 and have linked server Informix and use sql task for execute the procedure
it's posible??

View 2 Replies View Related

Integration Services :: Execute Task Does Not Update From Date Variable Reliably

Oct 23, 2014

I'm using a DateTime variable in SSIS 2008 that is used to set the SQLStatement property of an Execute SQL Task.

"DELETE FROM Labor WHERE Week = '" + (DT_WSTR, 100) @[User::Week] + "'"

Week is the next Sunday:
DATEADD( "day", @[User::DaysTillSunday] , @[User::TheDayThatIsTwentyMinutesPrior] )
DaysTillSunday:
DATEPART( "dw", @[User::TheDayThatIsTwentyMinutesPrior] ) == 1 ? 0 : 8 - DATEPART( "dw", @[User::TheDayThatIsTwentyMinutesPrior] )

TheDayThatIsTwentyMinutesPrior:
(DT_DATE)(DT_DBDATE)DATEADD("minute",-20,GETDATE())

The SSIS Package deletes the current week's data, reloads it with fresh data, then calculates the difference between the current week and last week.

The problem is that randomly, instead of deleting the current week, it will delete the previous week.  This happens maybe 5-10% of the time.  At least it does until I rebuild the package and import it into SQL Server again.

I'm guessing that the Execute SQL Task is not updating the value of the Week variable before it executes.  I started with the source type being a variable.  Then I decided to try Direct input and pass in the Week as a parameter (OLE DB Connection Type).  That didn't work either.

Most recently I tried writing the Week variable to a table first, then having a sequence container with all the tasks second.  Slightly better but I still saw the date was wrong 2 times in about 90 executions.  I was hoping that writing the Week variable out to the database would force an update of any associated connections to it, but that didn't seem to work.

View 18 Replies View Related

Integration Services :: How To Run All SSIS Packages In A Folder Using Execute Package Task

Jun 26, 2015

I have created for each container to call all the packages in a folder like below, also created a variable.

Then I add execute package task inside of foreach container and selected file system in a location and in connection called currently creating package name finally in connection properties i added variable in expression which i created and mapped into for each loop container. I referred below link 

[URL] ....

All the packages are running but its not ending once all the packages executed its re run and continue the running process, how to stop once all the packages execute. 

View 24 Replies View Related

Integration Services :: How To Access Object Type Variable In Execute Task

Nov 18, 2015

In my ssis 2012 package, I have a 'object' type variable with some table like records. I want to do some SQL operations like insert/update on the records in another table based on this 'Object' type variable records. Basically I want to use a MERGE statement with another physical table with the records in the 'Object' type variable.how to map/use the Object type variable in Execute sql task.I am not good in script task. How to utilize this Object variable in a Execute sql task?  

View 9 Replies View Related

Integration Services :: Logging Record Counts To Execute Task For Table Update

Jun 20, 2015

Have an SSIS package running great in 2008R2. It generates several flat files based on inline database queries. The first step of the package inserts a record into a log stats table and the last step of the package updates this record with the package name, run time and execution status. Now I need to add the records counts for each flat file to the log table. 

Is there a way I can update one field for run counts with each of the counts for each file. So the [run counts] table column would look something like:

file1: 43522
file2: 645367
file3: 7883

Is it possible to store the record counts and flat file names in variables then concat them at the end when updating this record?

Or, is a better way to just insert/update a new record for each flat file step and log the counts for that file for its own record?

In either case, how I can capture the file count and pass that to the update statement.

View 4 Replies View Related

Integration Services :: Send Email When Execute Task Stops But Doesn't Error?

Oct 13, 2015

I'm trying to put together an SSIS package that will look in one directory for 2 distinctly named .csv files.  The files will then be loaded into 2 tables. 

The first task I execute is a SQL Task that checks to see if the tables I'm loading the data into are empty.  If the tables have data, the package stops executing.  If they are empty, the package continues to execute.

What is the best way to send an email out from SSIS if the package stops on the first step? 

View 10 Replies View Related

Integration Services :: Calling Oracle Stored Procedure With Output Parameters In OleDB Command Task?

Nov 7, 2015

I want to call "oracle" stored procedure with output parameter from SSIS ole db command task.

Actually I am able to successfully call the procedure but my Output value is not updating in the mapped column.

I used below PL/SQL query.

DECLARE
IS_VALID VARCHAR2(200);
BEGIN
IS_VALID(
PARAM1 => ?,
PARAM2 => ?,
IS_VALID => IS_VALID
);
? := IS_VALID;
END;

If I try to supply "OUTPUT" word I get error:

"ORA-06550: line 1, column 45:

PLS-00103: Encountered the symbol "OUTPUT" when expecting one of the following:   . ( ) , * @ % & = - + < / >"
BEGIN
IS_VALID(
?,
?,
? OUTPUT
);
END;

how to receive output parameter value of oledb command while calling oracle stored procedures.

View 4 Replies View Related

[Execute Process Task] Error:The Process Exit Code Was -1 While The Expected Was 0.

Mar 11, 2008

Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server

What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%



However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".

There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log

Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0

thanks in advance
Dave

View 1 Replies View Related

Execute Process Task Error - The Process Exit Code Was 1 While The Expected Was 0.

Jan 30, 2007

How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:

SSIS package "IngramWeeklyPOS.dtsx" starting.

Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".

Task failed: Unzip download file

SSIS package "IngramWeeklyPOS.dtsx" finished: Success.

Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:

SSIS package "IngramWeeklyPOS.dtsx" starting.

Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".

Task failed: Unzip download file

SSIS package "IngramWeeklyPOS.dtsx" finished: Success.

The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.

Thanks,

Monisha

View 1 Replies View Related

Execute Process Task - Error :The Process Exit Code Was 2 While The Expected Was 0.

Mar 20, 2008



I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.

For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.

I am using the Execute Process Task and the process parameters I am providing are:



WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat

The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"

the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.

The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :

[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]

Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.

Can anyone help ?




View 9 Replies View Related

Integration Services :: SP Runs Fine In SSMS But Failed In Execute Task / All Parameters Checked Ok

Jul 30, 2015

There is one SP with parameters varchar, int, varchar and int. It runs perfect in SSMS. Now, I've moved into a Execute SQL task with four IN parameters. In parameter mapping, data type is varchar, long, varchar, long and parameter name is 0,1,2,3. It worked before which is great. Today, I opened this pkg for another testing but failed with the following error:failed with the following error: "Incorrect syntax near ';'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,parameters not set correctly, or connection not established correctly.

I know SP is fine as tested in SSMS.  I could not understand where it could go wrong in the ssis package. Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved