I run SSIS using DTEXEC command. The output of the SSIS are getting truncated after X caracters.
This is a typical message which doesn't really debug. (as the full path would show me the DB name...)
Progress: 2015-08-24 11:30:02.20
Source: Ensure Folder exists
Executing query "EXECUTE master.dbo.xp_create_subdir N'R:MSSQL_TRN...".:
100% complete
End Progress
Is there a way to get a longer message?
My source data indeed has leading 0s and I am reading my data into a #Temp Table with the data type of VARCHAR(10)...and its value is "0002565387". I am pumping this data into a SQL Server Table utilizing "OLE DB Destination". My "Flat File Connection Manager" has this column [AdditionalInfo4] defined as string [DT_STR] and the OutputColumnWidth is 100. I don't do any data derivation against this particular data column and simply map it in my "OLE DB Destination" and my database column is defined as [AdditionalInfo4] with a data type of VARCHAR(100).
Upon successful data pump of the data into my SQL Server Table, the column appears in SQL Server as "2565387".
Why is my SSIS solutuion truncating the leading 0s, which are indeed significant, on the data pump of data into my SQL Server Table? Is this possibly just a nuance of SSIS? Should I define a data column derivation for this data column so that the leading 0s are retained?
I have created a SSIS package that runs several reports exporting the file output to a shared directory. Then I email these files as attachments to an email group. I got everything working so far. But when I checked the email there are only some of the attachments (3 out of 6 files).I have created a variable that uses an expression to concatenate several filenames and their paths separated with a "|". When I evaluate the expression it list all six files. When I use the variable in an expression when assigning the "FileAttachments" property in the Expressions tab in the Send Mail Task editor and I evaluate the expression, it only shows 3 out of the 6 files.
Each file name and path is less than 100 characters. Why is this task only grabbing 3 out of the 6 files. If I check the shared directory all 6 files are there. Also, there are two paths in the package that input into the Send Mail Task each creating a different set of report files. Only one of the paths files are getting attached. The connectors to the Send Mail Task are set as Evaluation operation: "Constraint" and the Value: "Completion". Under Multiple constraints I have selected "Logical AND, All constraints must evaluate to True".
I have an Integration services application that retrieves big strings (over 32k) from an ODBC data source and stores them in a SQL server 2005 database as ntext.
Somehow the strings are truncated to 32K. The app only copies the data from the ODBC datasource to the (OLEDB) target.
Also, some of the special characters in the input text are not properly translated.
Any ideas?
I am loading data from a SQL server source table to oracle destination table and data type on both the tables are same but range is not same VARCHAR2(50) NOT NULL in oracle and sql data type is varchar(200). But when trying to load the data from TABLE SQL to TABLE Oracle i'm getting the following error:
View 6 Replies View RelatedI'm trying to import data in Excel into SQL Server table which you would think would be an absolute doddle seeing as they're both key Microsoft products in the BI family..One of the columns in Excel spreadsheet is Comments1 and a couple of the values in this column are over 300 characters in length yet when I set up the Excel source and then open Advanced Editor and look at Input and output properties this column has a data-type of Unicode string [DT_WSTR] with length of 255 which leads to the truncated error in the title.
I've researched this and on find going into the registry and updating the TypeGuessRows value from 8 to zero. I've done this and yet the data-type is still showing as Unicode string [DT_WSTR] with length of 255. I've even moved the row with the largest number of characters to the top of the spreadsheet and changed the TypeGuessRows value to 1 but the data-type still stays the same.I can't believe that it's soooo difficult to import data from one of Microsoft's key BI applications to another using their 'world-class' integration tool.
Suppose in my table i have 300 records. In that 300 records i want to update first 100 records with today's date. 101 to 200 records with yesterday's date and 201 to 300 records with tomorrow's date.
View 2 Replies View RelatedI have one ssis package moving the data from staging to destination. In stating table we have the duplicate data. But in destination table 4 columns have primary key. How to handle the duplicate records in oldedb source.
View 8 Replies View RelatedWhat's the best way to write key values of records processed in my SSIS 2012 package to the log provider chosen?My SSIS package deactivates widgets as well as thingies. It was just released into production this week, runs daily, and we'd like to keep a close eye on what it's doing for a couple of weeks, by that I mean on any day be able to quickly see which thingies and widgets were deactivated that morning. It typically deactivates less than 5 widgets and thingies per day.
We could dig through the database to see which were deactivated, but that only works if somebody hasn't manually reactivated it since it was deactivated. We need a log. This is a temporary watch we're doing, so we don't want to write to a table or make make any significant package changes, such as adding new tasks.It seems like writing the 5-or-so deactivated thingy and widget key values to the log is the best way to watch this package. What's the most efficient way to do this? I'm hoping to avoid a new loop and script component with "Dts.Log" calls, but I don't know any other way.
I have an SSIS package that is creating an Excel worksheet and writing data to it. It works fine when i run it inside Visual Studio. But when it runs as a scheduled job it writes the header and no data. I turned on logging and the log even says it is writing the 10,456 rows that it should be.
But they are not showing up in the Excel document. The job is setup as 32 bit and writing to Excel 97-2003. The job ends normally and does not generate any type of messages that are out of the ordinary. This is running on SQL Server 2008r2.
I have a source table #source with columns 'source', 'patientcode' ,'patientdesc' and it has 4 records as below
source patientcode patientdesc
canada abc patient1
canada efg patient2
canada hij patient3
canada klm patient4
I have a target table and it has 2 records as below.
source prefix tgt_patientcode tgt_patientdesc
canada cn abc patient1
canada cn efg patient2
Now, I want to merge the source data with target table -that means, if the records are already avaible in target, then ignore and if it does not available then INSERT.
This is the query i used but new records are not getting inserted.
MERGE #target T
USING #source S
ON S.SOURCE=T.Source
WHEN NOT MATCHED BY TARGET THEN
INSERT ( Source, Prefix ,tgt_patientcode ,tgt_patientdesc)
VALUES ('Canada' , 'cn' , s.patientcode, s.patientcode);
I want the output as below
source prefix tgt_patientcode tgt_patientdesc
canada cn abc patient1
canada cn efg patient2
canada cn hij patient3
canada cn klm patient4
DDL as below :
create table #target (source varchar(100),prefix varchar(2),tgt_patientcode varchar(100),tgt_patientdesc varchar(100))
insert into #target values ('canada','cn','abc','patient1')
insert into #target values ('canada','cn','efg','patient2')
[Code] ....
I need to get the record counts for all the flat files in a folder. All the flat files are having different format.
Can I get the record count using a single data flow task and for each loop container?
I am in middle of my transformation where I have to assign records equally among 3 different groups. I can do that in SQL using NTILE() Over() function. How do I do that in SSIS package. I have applied different business rules during transformation to get unique records and now I have to assign those records to 3 group in and generate excel report.Basically, I will need to have another column which will have those group numbers.
View 6 Replies View RelatedI have two records in the source with information ID, RevisionID, Description, Region
There are two lookup files one with ID,Description amd other with ID, Region
I wish to update my two source records with performing lookup with these two files.To get the correct description and region data. How to do this in ssis DFT.
I have a transformation where final result set give me 25 rows of data. Now before I put into destination table, I need to add another column which will show how many total records we have. Like.
My dataset:
A 20 abc
B 24 mnp
c 44 apq
Now I need to add another column within my transformation before I store the result set to destination like this:
A 20 abc 3
b 24 mnp 3
c 44 apq 3
Here. new column gives count of total rows in our dataset which was 3.
How can I achieve this? Can I use derive column to this?
I am trying to load a simple Excel file into a Database table and the SSIS Package is not loading any records beyond 3233 records. I am just surprised. I tried using the "IMEX=1" mentioned in some of the online resources but it didn't work. I am using an Excel Source, a Data Conversion Transformation and an OLEDB Destination in my package in SQL Server 2014 (which is pretty simple and straightforward).The Excel file I am trying to load can be found here.
And, here is my table structure.
CREATE TABLE [gov].[loan_limits](
[FIPS_State_Code] [varchar](3) NOT NULL,
[FIPS_County_Code] [varchar](3) NOT NULL,
[County_Name] [varchar](50) NOT NULL,
[State] [varchar](2) NOT NULL,
[CBSA_Number] [varchar](6) NOT NULL,
[code]...
I have one scenario
Table
Col1. Col2
1. A,b,c,df,ghf
2. C,b
3. B
Output should be
Col1. Col2
1. A
1. B
1. C
1. Df
1. Ghf
2. C
2. B
3. B
I have an Excel file which contains some data. I want to load that into a SQL server Table. Here are my conditions :
1. If the table doesn't have any matching records from the Excel file, then my DFT should load the data from that Excel to the Dest Table.
2. If the table has even one or more matching records, then the DFT should not process at all, instead I should send an email to the business stating that there are some matching records and hence the package is not process...ed.
P.S. If i use Lookup, I have two matching and non-matching output. which will process the non matching records into the table and matching can be redirected to any flat/Excel file. But i don't want to do this. I just want to lookup the Sql Server table and excel.
It'll be good if there is an additional option in the Lookup "Fail component on matching records".
I have a stored proc that is returning the results I need for output to .txt file.
Is there a way in SSIS to commit 50K (or whatever number) row batches at a time or should I just handle this in the stored proc?
select * into #TempTable
from SomeTable
[WHILE LOOP] --throttle commit batches of 50K rowcount
select *
from #TempTable
[END LOOP]
drop table #TempTable
But If I'm doing this in SSIS, I can't drop the #temp table otherwise I have nothing to output right?
Hi
I have a table Test a execute this below query
truncate table Test
I want to retrive records of Test table .How can i do.
Ranjeet Kumar Singh
My table has got 67K records but the tool is showing just 100 records other records are getting truncated. Now what i have to do in SQL statement to view the other records starting from 100 to 1000?
View 2 Replies View RelatedHere is my requirement, How to handle using SSIS.
My flatfile will have multiple columns like :
ID key1 key2 key3 key 4
I have SP which accept 3 parameters ID, Key, Date
NOTE: Key is the coulm name from the Excel. So my sp call look like
sp_insert ID, Key1, date
sp_insert ID, Key2,date
sp_insert ID, Key3,date
When Datazen caches a data source, it sometimes says that the data was truncated. What factors are involved in the truncation and what I might be able to do to expand the size of cached elements to avoid truncation? My only current solution is to make the data source "Real Time" rather than cached.
View 3 Replies View RelatedHello friends.
I managed to design an Integration service package,but the desired level of performance has not been achieved(i.e it is performing slow).
So I want to know what are the best practices for optimized solution .
In my package I'm exreacting data from XML file and Storing it in SQL server database with some processing dring data flow.
I'm using
1) Two Script Task Control -In these control,I m opening the connection to XML file through VB.net code and
iterating each record at a time.
2)Two OLE DB Command -Each fetched record from script task component is processed in OLEDB command through
stored procedure and then inseted into database.
3)One for Loop -This loop contains two script Task control and two OLEDB Command control,
(mentioned above),for fetching single record and inserting it in database.
4)One derived Column
5)One Multicast
6)One Character Map
7)One OlEDB Source
As with my current performance I'm able to insert one record in every .5 second (Which is much below to acceptable limits)
Is control lying disabled on SSIS designer pane also affect the performance of execution.
I am exporting SSRS report to Excel I am aware that excel doesn't show footer , It shows in print preview but my footer has text box which have text disclaimer more than 255 characters, the data getting truncated.
View 3 Replies View RelatedHi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
Hello, I have a problem when trying to fully process an SSAS database using Integration Services "Analysis Services Processing Task" task. I have 2 of these tasks which are responsible for processing the Dimensions then the Cubes. When I run the package either via the BIDS environment or on the local server from the Integration Services engine, I will get an error after about 20 minutes stating:
"Error: Memory Error: Allocation failure. Not enough storage is available to process this command""Error: Errors in the metadata manager. An error occurred when loading the <cube name> cube from the file \?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataMyWarehouse<cube file>.xml"
The cube name is not specific, it will fail and any of my cubes could be in the error log
If I fully process the AS database using the AS engine (logon to local AS server, right-click AS database and click Process), I get no errors at all, it processes and completes fine. The processing options are identical when I run in AS or via the SSIS "Analysis Services Processing Task" task.
I've searched quite a lot online but no joy, the information I have gleaned from various sites does not directly link SSIS with SSAS processing problems.
When either the AS processing starts via SSAS or SSIS the memory usage of MSMDSRV.exe increases to around 1.4 / 1.5 GB but never goes to 2GB ever, even when the error appears.
I've done the following with no effect.
" Have run via AS and works fine
" No specific cube it fails on
" Have created a Dimension only package, same problem
" Changed the maxmemorylimit
" Changed the connections to localhost
" Memory DOES NOT max out on server
Server Specs:
Windows Server 2003 Standard + Service Pack 2
4GM ram, 2GB paging file
SQL Server 2005 + Service Pack 2
Can anyone help?
Andy
Does anybody know of a notification services using SSIS? Is it SendMail or otherwise? Is there a step-by-step practice on how to create one?
View 19 Replies View RelatedIs there a way to give customers access to SSIS? They need to be able to create their own SSIS packages. Of course we have more then one customer so it would be nice to have modular security in place where they don't get to see customers abc and customer xyz packages. Only their own.
thanks!
Hi All,
I have created an integration services project (attached is a screenshot) that workes against the flat file (.DAT extension) and it does some manipluation in the data and then load it into the table. Everything works fine.
Now I want to get the name of my flat file source fille (which is a .DAT file) and then insert it in the table.
I am running th integration services against different .DAT files (only one file at one time) which are located on different locations.....so what I want is that, whenever I run the package it do the usuall processing and then while loading the data in to the destination table, it also load the name of the file into the destination table (lets called a field "FileName" of nvarchar type in the table "Comphistory")
How can I achieve this?
I am looking for a quick and easy help.
Thanks,
Zee
Problem
When you have a SSIS package that contains a connection from a data source, this connection is not updated when the data source changes based on a configuration change.
Situation :
A SSIS solution contains 3 configurations : Development, Test, Production. You can create those configurations in configuration manager of the solution.
The SSIS project contains one Data source. It doesn't really matter what type but I take SQL Server. The database server in development is SQL_DEV, in test is SQL_TEST and in production is SQL_PROD. Initially they are for all configurations the same. You can specify those values by changing the active configuration and then editing the Data source.
In the SSIS package (DTSX), you can create a connection manager based on a Data source.
If you change the Data source, the connection manager is also changed. If you change the Data source by changing the active configuration, the connection manager is not being updated.
If you think this isn't a big issue think big. We have 4 configuration, 10 shared Data sources and 25 DTSX packages. That would give a maximum of 1000 settings (4 x 10 x 25). Using this method it can be reduced to 40 (4 x 10). Of course this is a theoretical but it is very common to have the destination data source re-used on all packages, which still would be 100 settings (4 x 25)
Steps to reproduce
- create a new SSIS project
- In the solution explorer, create a new Data source named TestSource.
- In the connection managers window of Package.dtsx, create a new connection from a Data source.
- Make some changes in to TestSource.ds under the Data Sources. For example change the server or the database.
- Verify that those changes are also in the package.
- in the solution explorer, right click the solution and select configuration manager
- under active solution configuration, create a new configuration named test.
- Set the copy settings from : development
- Verify that Create new project configuration is checked.
- click OK and close.
- Notice that the active configuration is now Test
- Make some changes the Testsource.ds like a different server.
- Verify that those changes are also in the package.
- Make the development configuration as active.
- Notice that the Testsource.ds contains now the original settings.
- You will notice that the connection manager still contains the "test" settings and not the development settings.
- If you create a deployment utility it will still contains the wrong values.
with regards,
Constantijn Enders
Hi all,
Can someone explain to me why I am getting this kind of error though I am able to integrate all the data succeesfully to the next destination.
Ronald
SSIS package "Prescription.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at Data Flow Task, SQL Server Destination [521]: An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 58, column 1. The destination column (PatientId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 27, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 26, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 25, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 24, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 23, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 22, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 21, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 20, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Hi,
is Integration Services included in SQL Server Express?
In what version/module?
Thanks
just Do It