Suppose in my table i have 300 records. In that 300 records i want to update first 100 records with today's date. 101 to 200 records with yesterday's date and 201 to 300 records with tomorrow's date.
View 2 RepliesI have a task where I'm dealing with Employee information. I load this data on a daily basis where I capture Name,Is_Active,Address information of the employee and I do truncate and load operation. Now I have a task to have a additional column called 'Statuschanged_dt' and have to capture the date when Is_Active changed from 'Yes' to 'No'. I know this can done in multiple ways like destination lookup, SCD and also CDC.
View 9 Replies View RelatedThe default collation for SSISDB is SQL_Latin1_General_CP1_CI_AS. I had a question from a client today who asked if its possible to change it to French_CI_AS as they have issues with importing data from flat files using SSIS package. The issue they are facing is with different french characters and also numeric values with a scale... All their "user" databases are French_CI_AS as is the Instance collation.I'm guessing its not supported to change the collation of SSISDB as when i attempted on a "test" instance i get.
The object 'dm_execution_performance_counters' is dependent on database collation. The database collation cannot be changed if a schema-bound object depends on it. Remove the dependencies on the database collation and then retry the operation.The object 'get_database_principals' is dependent on database collation. The database collation cannot be changed if a schema-bound object depends on it. Remove the dependencies on the database collation and then retry the operation.
The object 'CK_Folder_PermissionType' is dependent on database collation. The database collation cannot be changed if a schema-bound object depends on it. Remove the dependencies on the database collation and then retry the operation.
The object 'CK_Project_PermissionType' is dependent on database collation. The database collation cannot be changed if a schema-bound object depends on it. Remove the dependencies on the database collation and then retry the operation.
The object 'CK_Environment_PermissionType' is dependent on database collation. The database collation cannot be changed if a schema-bound object depends on it. Remove the dependencies on the database collation and then retry the operation.The object 'CK_Operation_PermissionType' is dependent on database collation. The database collation cannot be changed if a schema-bound object depends on it. Remove the dependencies on the database collation and then retry the operation.ALTER DATABASE failed. The default collation of database 'SSISDB' cannot be set to French_CI_AS. (Microsoft SQL Server, Error: 507
If its not possible to change the collation of SSISDB, Adding collate statement to each join in the ssis package??I cant find anything in documentation about this but maybe overlooked something...
I am working on 1 POC project.I have 2 customer having source file in txt format, but the column sequence of both customer are diffrent.Number of columns in all files are like below.
CustA
ID NAME AGE
1 VIPIN 29
CustB
ID AGE NAME
2 29 jayesh
As per source file you can see that CustA have column sequence ID,NAME,AGE and CustB Have ID,AGE,NAME sequence .I have target table #Temp with ID,NAME,AGE sequence.Like that I have many files from both customer, I have to load in ID,NAME,AGE sequence from all source file to target table.How can we change the sequence of source column before loading to target table.
I am using Execute sql task in my SSIS package, and I am trying to make the following query:
<o:p></o:p>
Select max(sqlid) from archive.dbo.Archivebbxfbhdr
where timein <= ?<o:p></o:p>
Where ? is my input parameter variable migration_start which is a datetime.<o:p></o:p>
My issue is that variable name migration_start which give me default format of 6/11/2015 1:26 AM
But I expecting to get in 2015-06-11 01:26:22.813 format.<o:p></o:p>
How I can I change the datetime format of my variable to be (yyyy/mm/dd)hh:mm:ss)?<o:p></o:p>
how to change measure names in ssas. i need to change it from Total measure to Total GM.
how to change Dimension names in ssas. i need to change it from ID to Master ID.
I have my SSIS package that reads elements from a Sharepoint list to a SQL table. The data type of my source is string and the destination is integer. The source column can sometimes be an empty string "" (not a required column)
Which expression to use and "where" or "what" SSIS component can I add this expression to? Like I know that I can use the "Conditional Split" to filter the data so for my expression which component can I use?
I have created an package in SSIS and getting some problem when i am export date from OLEDB to Excel its format getting change. I am passing date format MM/dd/yyyy and its showing yyyy-MM-dd.
View 2 Replies View RelatedI have package there i have multiple tasks,I have used one User definied varible into my package level,So here my condition is i want to change my variable name from the package level,Here that variable used in different places in my package level,it has used in some places as well in my package level.
I need to change my Variable name after development of my package so how it will changed.
We may need to change the account presently used to run the Windows Service "SQL Server Integration Services".What are the implications of making such a change?
View 5 Replies View RelatedI've deployed my ssis pkg to the server and created a sql job to run this pkg. So far, everything is fine. Today, I got a request to change some variables inside the package which is part of the .dtsconfig. I want to edit the deployed .dtsConfig but it won't allow me and always complained that this file has been opened by another program. I am sure i've closed my ssis designer and other notpad, why can't I edit and save .dtsconfig file?
View 4 Replies View RelatedI run SSIS using DTEXEC command. The output of the SSIS are getting truncated after X caracters.
This is a typical message which doesn't really debug. (as the full path would show me the DB name...)
Progress: 2015-08-24 11:30:02.20
Source: Ensure Folder exists
Executing query "EXECUTE master.dbo.xp_create_subdir N'R:MSSQL_TRN...".:
100% complete
End Progress
Is there a way to get a longer message?
I just converted several SSIS packages from SQL Server 2008 to SQL Server 2012. The packages having issues are those that are SSAS process cube tasks.
When editing the tasks in SSDT for SQL 2008, there is "Change Settings" button/option. In SSDT 2012, there is no Change Settings option!
What happened to it? Even when creating new packages, this option is not available.
I have implemented a package to load multiple files to a destination. Since the source was a txt file, i have created as flat file source. However now we are getting files in excel format as well.
Is there anyway the source gets changed dynamically based on the file extension, output of the foreach file enumerator? I can think one solution to have 2 dataflow tasks based on precedence constraining and expression one is for .txt and other one is for .xls.
I have one ssis package moving the data from staging to destination. In stating table we have the duplicate data. But in destination table 4 columns have primary key. How to handle the duplicate records in oldedb source.
View 8 Replies View RelatedWhat's the best way to write key values of records processed in my SSIS 2012 package to the log provider chosen?My SSIS package deactivates widgets as well as thingies. It was just released into production this week, runs daily, and we'd like to keep a close eye on what it's doing for a couple of weeks, by that I mean on any day be able to quickly see which thingies and widgets were deactivated that morning. It typically deactivates less than 5 widgets and thingies per day.
We could dig through the database to see which were deactivated, but that only works if somebody hasn't manually reactivated it since it was deactivated. We need a log. This is a temporary watch we're doing, so we don't want to write to a table or make make any significant package changes, such as adding new tasks.It seems like writing the 5-or-so deactivated thingy and widget key values to the log is the best way to watch this package. What's the most efficient way to do this? I'm hoping to avoid a new loop and script component with "Dts.Log" calls, but I don't know any other way.
I have an SSIS package that is creating an Excel worksheet and writing data to it. It works fine when i run it inside Visual Studio. But when it runs as a scheduled job it writes the header and no data. I turned on logging and the log even says it is writing the 10,456 rows that it should be.
But they are not showing up in the Excel document. The job is setup as 32 bit and writing to Excel 97-2003. The job ends normally and does not generate any type of messages that are out of the ordinary. This is running on SQL Server 2008r2.
I have a source table #source with columns 'source', 'patientcode' ,'patientdesc' and it has 4 records as below
source patientcode patientdesc
canada abc patient1
canada efg patient2
canada hij patient3
canada klm patient4
I have a target table and it has 2 records as below.
source prefix tgt_patientcode tgt_patientdesc
canada cn abc patient1
canada cn efg patient2
Now, I want to merge the source data with target table -that means, if the records are already avaible in target, then ignore and if it does not available then INSERT.
This is the query i used but new records are not getting inserted.
MERGE #target T
USING #source S
ON S.SOURCE=T.Source
WHEN NOT MATCHED BY TARGET THEN
INSERT ( Source, Prefix ,tgt_patientcode ,tgt_patientdesc)
VALUES ('Canada' , 'cn' , s.patientcode, s.patientcode);
I want the output as below
source prefix tgt_patientcode tgt_patientdesc
canada cn abc patient1
canada cn efg patient2
canada cn hij patient3
canada cn klm patient4
DDL as below :
create table #target (source varchar(100),prefix varchar(2),tgt_patientcode varchar(100),tgt_patientdesc varchar(100))
insert into #target values ('canada','cn','abc','patient1')
insert into #target values ('canada','cn','efg','patient2')
[Code] ....
Is there a way to change an image data type? I want to make a change to some deployed SQL 2008 SSIS deployed packages. I have a TSQL SELECT that searches the packages for a string. But I would like to be able to change a string. I have googled it but cannot find anything.
View 5 Replies View RelatedI need to get the record counts for all the flat files in a folder. All the flat files are having different format.
Can I get the record count using a single data flow task and for each loop container?
I am in middle of my transformation where I have to assign records equally among 3 different groups. I can do that in SQL using NTILE() Over() function. How do I do that in SSIS package. I have applied different business rules during transformation to get unique records and now I have to assign those records to 3 group in and generate excel report.Basically, I will need to have another column which will have those group numbers.
View 6 Replies View RelatedI have two records in the source with information ID, RevisionID, Description, Region
There are two lookup files one with ID,Description amd other with ID, Region
I wish to update my two source records with performing lookup with these two files.To get the correct description and region data. How to do this in ssis DFT.
I have a transformation where final result set give me 25 rows of data. Now before I put into destination table, I need to add another column which will show how many total records we have. Like.
My dataset:
A 20 abc
B 24 mnp
c 44 apq
Now I need to add another column within my transformation before I store the result set to destination like this:
A 20 abc 3
b 24 mnp 3
c 44 apq 3
Here. new column gives count of total rows in our dataset which was 3.
How can I achieve this? Can I use derive column to this?
I am trying to load a simple Excel file into a Database table and the SSIS Package is not loading any records beyond 3233 records. I am just surprised. I tried using the "IMEX=1" mentioned in some of the online resources but it didn't work. I am using an Excel Source, a Data Conversion Transformation and an OLEDB Destination in my package in SQL Server 2014 (which is pretty simple and straightforward).The Excel file I am trying to load can be found here.
And, here is my table structure.
CREATE TABLE [gov].[loan_limits](
[FIPS_State_Code] [varchar](3) NOT NULL,
[FIPS_County_Code] [varchar](3) NOT NULL,
[County_Name] [varchar](50) NOT NULL,
[State] [varchar](2) NOT NULL,
[CBSA_Number] [varchar](6) NOT NULL,
[code]...
I have one scenario
Table
Col1. Col2
1. A,b,c,df,ghf
2. C,b
3. B
Output should be
Col1. Col2
1. A
1. B
1. C
1. Df
1. Ghf
2. C
2. B
3. B
I have an Excel file which contains some data. I want to load that into a SQL server Table. Here are my conditions :
1. If the table doesn't have any matching records from the Excel file, then my DFT should load the data from that Excel to the Dest Table.
2. If the table has even one or more matching records, then the DFT should not process at all, instead I should send an email to the business stating that there are some matching records and hence the package is not process...ed.
P.S. If i use Lookup, I have two matching and non-matching output. which will process the non matching records into the table and matching can be redirected to any flat/Excel file. But i don't want to do this. I just want to lookup the Sql Server table and excel.
It'll be good if there is an additional option in the Lookup "Fail component on matching records".
I have a stored proc that is returning the results I need for output to .txt file.
Is there a way in SSIS to commit 50K (or whatever number) row batches at a time or should I just handle this in the stored proc?
select * into #TempTable
from SomeTable
[WHILE LOOP] --throttle commit batches of 50K rowcount
select *
from #TempTable
[END LOOP]
drop table #TempTable
But If I'm doing this in SSIS, I can't drop the #temp table otherwise I have nothing to output right?
I have a got a package with source as sql table which has got 50 columns. We are using only 10 columns out of this. Recently one column name has changed and thus throws error invalid mapping. When I open the source to do the changes noticed that all the colums are prselected now and also the datatypes got changed to default ( I had changed the datatypes as per my requirement while i developed). So now I had to select required columns from source and redo the datatype changes in advanced editor.Is there any option which doesnt disturb this settings and we just need to correct the mapping alone.
View 4 Replies View RelatedHere is my requirement, How to handle using SSIS.
My flatfile will have multiple columns like :
ID key1 key2 key3 key 4
I have SP which accept 3 parameters ID, Key, Date
NOTE: Key is the coulm name from the Excel. So my sp call look like
sp_insert ID, Key1, date
sp_insert ID, Key2,date
sp_insert ID, Key3,date
Hello friends.
I managed to design an Integration service package,but the desired level of performance has not been achieved(i.e it is performing slow).
So I want to know what are the best practices for optimized solution .
In my package I'm exreacting data from XML file and Storing it in SQL server database with some processing dring data flow.
I'm using
1) Two Script Task Control -In these control,I m opening the connection to XML file through VB.net code and
iterating each record at a time.
2)Two OLE DB Command -Each fetched record from script task component is processed in OLEDB command through
stored procedure and then inseted into database.
3)One for Loop -This loop contains two script Task control and two OLEDB Command control,
(mentioned above),for fetching single record and inserting it in database.
4)One derived Column
5)One Multicast
6)One Character Map
7)One OlEDB Source
As with my current performance I'm able to insert one record in every .5 second (Which is much below to acceptable limits)
Is control lying disabled on SSIS designer pane also affect the performance of execution.
Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
Hello, I have a problem when trying to fully process an SSAS database using Integration Services "Analysis Services Processing Task" task. I have 2 of these tasks which are responsible for processing the Dimensions then the Cubes. When I run the package either via the BIDS environment or on the local server from the Integration Services engine, I will get an error after about 20 minutes stating:
"Error: Memory Error: Allocation failure. Not enough storage is available to process this command""Error: Errors in the metadata manager. An error occurred when loading the <cube name> cube from the file \?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataMyWarehouse<cube file>.xml"
The cube name is not specific, it will fail and any of my cubes could be in the error log
If I fully process the AS database using the AS engine (logon to local AS server, right-click AS database and click Process), I get no errors at all, it processes and completes fine. The processing options are identical when I run in AS or via the SSIS "Analysis Services Processing Task" task.
I've searched quite a lot online but no joy, the information I have gleaned from various sites does not directly link SSIS with SSAS processing problems.
When either the AS processing starts via SSAS or SSIS the memory usage of MSMDSRV.exe increases to around 1.4 / 1.5 GB but never goes to 2GB ever, even when the error appears.
I've done the following with no effect.
" Have run via AS and works fine
" No specific cube it fails on
" Have created a Dimension only package, same problem
" Changed the maxmemorylimit
" Changed the connections to localhost
" Memory DOES NOT max out on server
Server Specs:
Windows Server 2003 Standard + Service Pack 2
4GM ram, 2GB paging file
SQL Server 2005 + Service Pack 2
Can anyone help?
Andy
i have a query i.e.
select project, description from table
with results
chocolate | white
chocolate | black
chocolate | brown
sugar | black
vinegar | yellow
i would like to get a result like:
chocolate | white, blakc, brown
sugar | black
vinegar | yellow
so I would like to get all values of one project in one records included with separators/a space in it