Integration Services :: SSIS Data Conversion From STRING TO DATE
Nov 30, 2015
I am trying to upload data from CSV to Sql table. I have a column as 'arrived_date' value '13:45' etc and while trying to load data i am getting error as "data conversion failed ,truncation may occur while loading data". In flat file connection this column datatype is string but in my table datatype is as time(). There is a error with conversion. I tried to change data type in advanced editor but no use. Using data conversion after flatfile makes my error disappear but it is giving error right at the file not even going through from file?
I am using flat file as source.I have quantity column in flat file which is a Numeric datatype and target table quantity datatype is Numeric.
I am able to load data from source to target but when I am comparing data from source to target I am not getting exact record from source flat files Source having data like
as we can see that data are not matching with source I can not change the target table quantity data type, is there any thing which I can do with source column data type.
We are using lookup transformation in SSIS 2012. The lookup transformation queries a table with two date columns. When we hover the mouse over the two columns in the 'columns' tab of the lookup transformation editor, the two columns show as DT_WSTR instead of DT_DBDATE. This causes the SSIS package to fail due to data type mismatch.A similar abandoned thread is available at: URL....
I have been trying to read a flat file which has a birthdate field. The field is string and the format is "011594". I have been trying to convert it to a date field in the following format "01/15/1994". Using the forum I was able to write the following expression but I am still keep getting error messages.
I also noticed few records are missing birthdate and few do not have the complete birthdate which means some birthdates are missing year and some are missing month. For example, some are completely missing and some are partially missing, like " " or "0312 ". Could this be the reason I was getting error message since the following expression does not include null and incomplete date of birth?
[Derived Column [1014]] Error: An error occurred while attempting to perform a type cast.
[Derived Column [1014]] Error: The "component "Derived Column" (1014)" failed because error code 0xC0049064 occurred, and the error row disposition on "output column "DOB" (2292)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Derived Column" (1014) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
I've a text file which having a datetime column value like YYYY-MM-DD-HH.MM.SS.XXXXXX. I cannot convert this is to datetime format from text file using BCP utility.
Presence of hypen "-" between DD and HH, the SQL server does not accept this is as Datetime.
Is there any option to covert the date value in format file in BCP.
I am re-writing old DTS packages(from sql 2005) to convert them to SSIS packages(sql 2014) and in one of the script task, the old activex script does not run.
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report. Following methods i tried in textbox expression but no luck.
Error:[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ?
I am using OLE DB source to extract data from Oracle. I have query (sample) like below, but SSIS is converting ID as Unicode String [DT_WSTR]. Why is that? and how to avoid this?
I have my SSIS package that reads elements from a Sharepoint list to a SQL table. The data type of my source is string and the destination is integer. The source column can sometimes be an empty string "" (not a required column)
Which expression to use and "where" or "what" SSIS component can I add this expression to? Like I know that I can use the "Conditional Split" to filter the data so for my expression which component can I use?
I have create packages which loads the data from flat file to sql server table, now I want to make my destination table connection dynamic what is format of connection string. I also need to pass user name and password for sql server dynamically in this case, what is the format for the connection string.
Also in package i used ADO.net as source for *.mdb files how i can set the commection to .mdb files dynamically which is used as source in my package.
I need to create a variable expression that will be passing yesterday's date to a sql command but when I create the variable there is only the datetime datatype, how can I trim the time portion from this expression to get the date portion :
I am using SSIS 2012 SP1 to import a comma delimited csv file into a SQL table.
One of the fields carries a time value:
Source = textfile, column=DT_STR(8), value format = "hhmmss", e.g. "011525" Destination = field in SQL table, data type = time(0)
To get it from the textfile to the SQL table I am:
1.) Creating a derived column called [d_Time of Entry]with the following formula -
SUBSTRING([Time of Entry],1,2) + ":" + SUBSTRING([Time of Entry],3,2) + ":" + SUBSTRING([Time of Entry],5,2)
2.) Performing a data conversion task to convert [d_Time of Entry] from DT_STR(8) to time(0) The upload fails because values that start with a zero, i.e. times before 10am, have their leading 0's stripped before being derived. You can see this because "011525" is derived as "11:52:5" when it should be "01:15:25".
Hi i am working on sending data from a dat file to table in sql server Database and i am using the Data conversion transformation in ssis to convert string of fixed length into numeric (11,5) which is the datatype for the price field in the table and its returning an error saying that status vale 6 and error text as Conersion Failed sue to overflow of specific type ... Can anyone let me know how to overcome this error.
All source and target date fields are defined as data type "smalldatetime". The "select" executes without error though when used with "insert into" it fails with the error:
Msg 295, Level 16, State 3, Line 25: Conversion failed when converting character string to small date-time data type..I am converting from a character string to smalldatetime since the source and target date columns are "smalldatetime". All other columns for the source and target are nvarchar(255). I assume there is an implicit conversion that I don't understand. In a test, I validated that all dates selected evaluate ISDATE() to 1.
USE [SCIR_DataMart_FromProd_06_20_2014] GO IF OBJECT_ID ('[SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]', 'U') IS NOT NULL DROP TABLE [SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]
I am downloading a webpage as a text file in order to read a specific string to assign it as a variable/parameter in order to create an output file name. I would like to know how would I be able to look for a specific string and output as another variable for the rest of the package.
2015 Conforming Loan Limits ------------------------------------------------------------------------ o _Loan Limits for Calendar Year 2015--All Counties _[XLS] </DataTools/Downloads/Documents/Conforming-Loan-Limits/FullCountyLoanLimitList2015_HERA-BASED_FINAL_FLAT.xlsx>_ , _[PDF] </DataTools/Downloads/Documents/Conforming-Loan-Limits/FullCountyLoanLimitList2015_HERA-BASED_FINAL.pdf>_ o _List of 46 Counties with Increases in Loan Limits for 2015
[Code] ...
To explain it a more better way, I have a sample webpage text here. I should be searching for "FullCountyLoanLimitList" appended by the current year (like FullCountyLoanLimitList2015) and copy the entire file name in the text file and assign it to another variable so that I can download that specific file using WebClient connection.
I am getting below errors when I try to import data from csv format to a sqlserver table.The csv file has date column that has date with format: 7/10/2015 1:18:39 PM and the sql server is using datetime not null for that field in the table.
[OLE DB Destination [90]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Invalid date format".
[OLE DB Destination [90]] Error: There was an error with input column "Date" (138) on input "OLE DB Destination Input" (103). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
As part of my package, i require a date (Only date, not DateTime) which is 10 months previous to get date.Eg: for today if the package executes, then i want 12/1/2014 , which i will use in my package as a filter like 'where date='?' where ? is a paramter which is is derived from the above logic
So, I have a project parameter @ppdate with value as -10. I create a variable with DateTime (because there is NO date type for SSIS) and gives the expression as below
dateadd("Month",@ppdate, DATEADD("D",-(DAY(GETDATE()))+1,GETDATE())) , I am getting '7/1/2011 11:33:38 AM' which i don't want - i want only '12/1/2014'. How can i get it?
To get '12/01/2014', If i change the variable from DateTime to string, then i think i cant use the value in the filter condition like ''where date='?' because this does not accept string. Is this correct?
I created a simple SSIS package that takes a Flat File Source (CSV file) and Imports it into a OLE DB Destination ([TestCSVImport].dbo.Table1). I have other CSV files I'd like to import, but I don't want to import entries where column "ordereID" (PK) are the equal. Just want to import the new data found in the CSV files. I tried adding a Lookup in-between the Flat File Source and the OLE DB Destination, but I'm not sure how to accomplish only importing new data.
We have a Job that calls a SSIS package 2005 that does some processing and execute a BAT file. This Job is being called by a web application.The BAT file creates a folder and named it based on the current date ( YYYY_MM) e.g 2015_07
It was working okay in the SQL Agent 2005 server until we moved to the new server SQL Agent 2012 using the same package SSIS package 2005. Now the issue is, instead of creating the folder based on YYYY_MM, it's now being created as YYYY_DD.I've checked the Regional settings of both server and they have the same "ENGLISH (United States) format. I even ran the code below and they're returning the same output echo %date:~ 10,4%_% date :~4,2%
I know the BAT file can be improved by not depending current locale in WINDOWS, but I just want to understand how this issue occurs and how does the regional setting being overridden?
I'm using Script Component to load data into Oracle DB due to the poor performance issue. Now, I found it will missing some data during the transmission. Please see the screenshot below:
I setup this package to import data from a Sharepoint list to a SQL Server data table. The primary key of my SQL table is mapped to the Title column of my Sharepoint list. There is a possibility that duplicate values will be entered in the Title field of the Sharepoint list. So when importing data into my table via SSIS, my package always error-out when there it comes across duplicate values. how you others have managed data integrity when importing from a Sharepoint list with the Title column being mapped to the primary key of a table.
Im newto SSIS. I want to develop package for data validation.
FirstName
1. Mandatory field checking: if Null, reject the record 2. If field length > 50, then reject the record
SSN
1. If field length > 12, then reject the record 2. If SSN is not in valid format, issue warning and process rhe record without SSN value. 3. Valid format: 9 digit numeric values should present after striping off all non-numeric characters. 4. Only send 9 digits to MDM
Like these i have 30 rules. And I have to shop the error msg if the validation fails like "Mandatory feild is missing".
In my package , I am used CDC Source transformation and received the Net changes then insert into Destination. But whatever Data coming from CDC source data type Varchar value needs to Converting Non Unicode string to Unicode string SSIS. So used Data conversion transformation to achieved this. I need to achieve this without data conversion.
