Integration Services :: SSIS Not Pulling All Data From Source?
May 6, 2015
I have ssis package that pull data from SAP (Using ADO.net connection) to SQL server every night but i have noticed that all data from source is not getting pulled by package . package losing some amount of row.
I am trying to pull data from an Oracle Db using SSIS. If I use the Table/View option in the Access Mode option on the OLE DB Source component, it works fine. But when I use the SQL Command option, the processing get stuck at Pre-Execution stage.... (for days).
After designing a SSIS package in Visual Studio 2005 that had two connection manager defined to keep the password. After I deployed the package to a file system. I then Imported the .dtsx file after making a Integration Services connection in Sql Server Management Studio. When I tried to run the package it failed when it tried to make the connection. When I edited the connection manager connection string and added the password and the package ran fine but it does not retain the password!. I need to have this package scheduled to run daily so I need to know how to have the package keep the password in the connection string. I have seen other posts on this issue but not seen a good solution. Could someone point me to the proper MSDN article that would explain how to implement this ? Is it a SQL Server configuration issue or a property in Visual Studio SSIS design time ?
I am working to archive some old data from a data warehouse using SQL server and SSIS. The data will be read and denormalized, then shipped out to a delimited text file.
The rowcount of the incoming data is significant, call it 10M+ rows per unit of work (one text file).
There are development advantages of using a stored proc for the data source - mainly ease of changing the denormalization logic as required. Wondering if there are performance advantages of an embeded query for the data source instead?
It was mentioned by one developer that when using a stored procedure, the output stream from the proc and subsequent SSIS steps cannot start until the full procedure processing is complete; i.e. the proc churns out its' result set in one big chunk.
He hinted that an embedded query does not have this same effect, but I am not sure that is accurate.
I'm using SSIS 2005 Enterprise edition, I'm creating a package that reads an excel (xls) file using the "excel source" component, and it dumps the data into an OLEDB destination (a sql server). When I drag the excel source component and create the excel connection to my file the component automatically reads the columns and their datatypes.
The problem is that I have a column which has numeric data and the package uploads as NULL every number that starts with a zero. (note: in excel this column is formatted as "text", despite it has only numbers, because it's the only way excel maintains the left sided zeros).
So I checked the data types by right clicking the excel source component -> show advanced editor and my surprise is that this column's data type is detected as double-precision float, and it doesn't let me change it. URL... but it only works when the first row of data has a number beginning with zero on this column. How to get the data imported correctly?
I want to design an SSIS package that loads data from files into SQL Server and I want to automate the process. My major issue is that the source file doesnt come in the same format. Some times I comes in either .csv , .xls , .txt or even .rpt file format. Is there a way I can write a code that checks through my folder and based on the available format on the folder it loads the value in ssis.
we need download files from FTP location , so we are using script component as source and when we are using the fallowing code// read a file and write out as columns in rows
WebClient myWebClient = new WebClient(); myWebClient.Credentials = new NetworkCredential(Variables.ftpLogin, Variables.ftpPassword);
// Concatenate the domain with the Web resource filename. string myStringWebResource = Variables.fileURL + Variables.fileName;
string s = myWebClient.DownloadString(myStringWebResource); StringReader reader = new StringReader(s);
we are getting the fallowing error The server returned an error: (404) Not Found. are we missing anything in the code.
I'm trying to import some XLS files that I receive from some suppliers. The problem is that every time they send some columns with text values but formatted as number. When I read those columns with SSIS Excel Source, they come all with null values.
I don't want to change the columns data types every time, so I would like to know if there's a way to bypass the column types that are already there.
I tried to use both the Jet driver and the Office 12 driver. I've already used the IMEX=1 on ExtendedProperties too with no success. Is there a way to force reading the columns as text, even if they have data types assigned to them?
I've got a problem to retrieve data from a Xml Source. Basically, I call a method from a Web Service which gives me a Xml file.
The problem is that the XML structure is not really good. But we can't touch it.
Here is the Xml File :
Code Snippet
<?xml version="1.0" encoding="utf-16"?> <ArrayOfWSTargetVO xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <WSTargetVO> <ProjectId> <Value>131</Value> </ProjectId> <Id> <Value>Toto</Value> </Id> <Name> <Value>bateau</Value> </Name> </WSTargetVO> <WSTargetVO> <ProjectId> <Value>131</Value> </ProjectId> <Id> <Value>Tata</Value> </Id> <Name> <Value>F35</Value> </Name> </WSTargetVO> ... </ArrayOfWSTargetVO> As you can see, for each WSTargetVO, we have a projectid, an id and a name. But the value is not directly put into these nodes but in a new one : <value>
That causes my problem because here is the xsd file generated by visual studio :
Code Snippet
<?xml version="1.0"?> <xsd:schema xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema" attributeFormDefault="unqualified" elementFormDefault="qualified"> <xs:element name="ArrayOfWSTargetVO"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" maxOccurs="unbounded" name="WSTargetVO"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="ProjectId"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="Value" type="xs:unsignedByte" /> </xs:sequence> </xs:complexType> </xs:element> <xs:element minOccurs="0" name="Id"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="Value" type="xs:string" /> </xs:sequence> </xs:complexType> </xs:element> <xs:element minOccurs="0" name="Name"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="Value" type="xs:string" /> </xs:sequence> </xs:complexType> </xs:element> </xs:sequence> </xs:complexType> </xs:element> </xs:sequence> </xs:complexType> </xs:element> </xsd:schema> And when I try to use the outpul results from the Xml file, I can't see how I can get a datatable with three columns corresponding to projectid, id and name.
Integration Services only asks me to choose between WSTargetVO or ProjectID or Id or Name and give me the <value> value.
I don't know if it is possible to modifiy the contents of the XmlFile or something else using XPath.
Of course, if I try to modifiy the XSD file and delete the value node to have a simple structure, I see my three columns but i can't get any data.
I'm aware that the XML file is pretty bad but it is impossible for me to change it.
If somebody has an idea, I would be happy to hear it :-)
I am using SSIS 2014 and installed adapter for sharepoint list source and destination and when I refresh the toolbox I don't see them. Is there a way to manually add them?
I am able to collect data from Progress DB, using ODBC Connectivity. The problem I am facing is, i have to iterate thru multiple servers. How do i configure ODBC source dynamically. It creates problem. Using expression, i tried to set the connectionstring dynamically, but it fails.
I need to grab data from teradata(using odbc connection).. i have no issues if its just bunch of joins and wheres conditions.. but now i have a challenge. simple scenario, i have to create volatile table, dump data into this and then grab data from this volatile table. (Don't want to modify the query in such a way i don't have to use this volatile table.. its a pretty big query and i have no choice but create bunch of volatile tables, above scenarios is just mentioned on simple 1 volatile table ).
So i created a proc and trying to pass this string into teradata, not sure if it works.. what options i have.. (I dont have a leisure to create proc in terdata and get it executed when ever i want and then grab data from the table. )
I'm encountering a very peculiar situation when I'm trying to compare source and target data using conditional split. Following is the Data Flow and how I'm trying to achieve this.
Source Data : Col_A (PK) Col_2 1 100 8 500 Target Data : Col_A (PK) Col_2 1 100 3 700 8 500 Look-up Target on Col_A to check for existing records. Now we have four columns in Look-up match output: Col_A, Col_B, Lkp_Col_A (Target Col), Lkp_Col_B (Target Col).
Conditional Split: Compare Col_B with Lkp_Col_B
Update target if there is any change in the existing value of Col_B.When I'm running the package for every record in source, the conditional split fails and even when there is no change in Col_B, some of the records (Not all and quite randomly) get updated with the same value. If I run the package for few records, it works absolutely fine.
I'm using a shared data source to connect an Oracle server in my packages. After changing the database user password in the shared data source, I noticed the package concerned would fail with the following description.
All examples I found refer to classes under Microsoft.SharePoint namespace. However, I have the SharePoint CSOM that only gives me the Microsoft.Sharepoint.Client namespace.
I need to read the selected values of a multichoice field, but not sure how to do it with classes in the namespace above.
everthing works, exept the TSQL_x0020_Reference_x0020_Numbe field.
I have a package which has an Excel source with the 'Data access mode' set to SQL command and then a sql select statement. When I try and hit the 'Preview...' button below the 'SQL command text' window I get the following error:
"Error at Standard Data Flow Tasks [source tasks name]: No column information was returned by the SQL command"
Ordinarily this would be down to the fact that my SQL is shocking, I hit the 'Preview...' button whilst the workbook the source is pointing at was open and it works fine??
I can't figure this out, but needless to say the package errors with a NEEDSNEWMETADATA when I try and run it.
We have a single generic SSIS package that is used to import several hundred iSeries tables into SQL. I am not looking to rewrite the process. But I am looking for ways to improve performance.
I have tried retain same connection, maximum insert commit size, lock table (tablock), removed some large columns, played with the log file location and size, and now I am working to tweak the defaultbuffermaxrows.
To describe the data flow task - there are six data flows tasks (dft) working at the same time. Each dtf has their own list of iSeries tables and columns and the corresponding generic SQL table names. Each dtf determines their list of tables based on the number of columns to import. So there is dft30 (iSeries table has 1-30 columns to import), dtf60 (iSeries table has 31-60 columns to import), etc. The destination SQL tables are generically called Staging30, Staging60, etc. Each column in the generic Staging tables are varchar(100). The dtfs are comprised of an OLE DB Source and an OLE DB Destination.
The OLE DB Source uses a SQL Command from Variable to build a SELECT statement. The OLE DB Source uses a connection manager that uses an IBM iAccess IBMDA400 provider. The SQL Command ends up looking like this for the dtf30. This specific example is importing from the iSeries table TDACLR and it only has two columns so it will be copied to the Staging30 table.
select TCREAS AS C1,TCDESC AS C2,0 AS C3,0 AS C4,0 AS C5,0 AS C6,0 AS C7,0 AS C8,0 AS C9,0 AS C10,0 AS C11,0 AS C12,0 AS C13,0 AS C14,0 AS C15,0 AS C16,0 AS C17,0 AS C18,0 AS C19,0 AS C20,0 AS C21,0 AS C22,0 AS C23,0 AS C24,0 AS C25,0 AS C26,0 AS C27,0 AS C28,0 AS C29,0 AS C30,''TDACLR'' AS T0 from Store01.TDACLR
The OLD DB Source variable value looks like the following, but I am not showing the full 30 columns
select cast(0 AS varchar(100)) AS C1,cast(0 AS varchar(100)) AS C2,cast(0 AS varchar(100)) AS C3,cast(0 AS varchar(100)) AS C4,cast(0 AS varchar(100)) AS C5, ... cast(0 AS varchar(100)) AS C30.
The OLE DB Destination uses OpenRowSet Using FastLoad From Variable. The insert into Staging30 ends up looking like this.
Of course we then copy and transform the Staging30 data to the SQL table that equals T0.
But back to defaultbuffermaxrows. Previously the dtfs had default values of 10000 for DefaultBufferMaxRows and 10485760 for DefaultBufferSize. I added a SQL task to SUM the iSeries column sizes, TCREAS and TCDESC in this example, and set the DefaultBufferMaxRows by dividing the SUM of the columns max_length into 10485760. But I did not see a performance improvement. Do you think that redefining the columns as varchar(100) for the insert is significant? Should I possibly SUM the actual number of columns (2) as 2x100 or SUM the 30x100?
In my package , I am used CDC Source transformation and received the Net changes then insert into Destination. But whatever Data coming from CDC source data type Varchar value needs to Converting Non Unicode string to Unicode string SSIS. So used Data conversion transformation to achieved this. I need to achieve this without data conversion.
I have a got a package with source as sql table which has got 50 columns. We are using only 10 columns out of this. Recently one column name has changed and thus throws error invalid mapping. When I open the source to do the changes noticed that all the colums are prselected now and also the datatypes got changed to default ( I had changed the datatypes as per my requirement while i developed). So now I had to select required columns from source and redo the datatype changes in advanced editor.Is there any option which doesnt disturb this settings and we just need to correct the mapping alone.
I'm using Script Component to load data into Oracle DB due to the poor performance issue. Now, I found it will missing some data during the transmission. Please see the screenshot below:
I setup this package to import data from a Sharepoint list to a SQL Server data table. The primary key of my SQL table is mapped to the Title column of my Sharepoint list. There is a possibility that duplicate values will be entered in the Title field of the Sharepoint list. So when importing data into my table via SSIS, my package always error-out when there it comes across duplicate values. how you others have managed data integrity when importing from a Sharepoint list with the Title column being mapped to the primary key of a table.
Im newto SSIS. I want to develop package for data validation.
FirstName
1. Mandatory field checking: if Null, reject the record 2. If field length > 50, then reject the record
SSN
1. If field length > 12, then reject the record 2. If SSN is not in valid format, issue warning and process rhe record without SSN value. 3. Valid format: 9 digit numeric values should present after striping off all non-numeric characters. 4. Only send 9 digits to MDM
Like these i have 30 rules. And I have to shop the error msg if the validation fails like "Mandatory feild is missing".
I am using flat file as source.I have quantity column in flat file which is a Numeric datatype and target table quantity datatype is Numeric.
I am able to load data from source to target but when I am comparing data from source to target I am not getting exact record from source flat files Source having data like
as we can see that data are not matching with source I can not change the target table quantity data type, is there any thing which I can do with source column data type.
I am going to set up a new SSIS package that will import data into 5 different tables on a SQL Server database. The source of the data is on another SQL Server and I will use to select the data. If one of the tables fail to import I do not want the SSIS package to import any of the data.What is the best way to create this package? Is it best to create one SSIS package, with five data flow tasks that are linked to each other. Within each data flow task, is a Source and Destination to transfer the data to each table.
.If record from Detail (Spectrum table) is null then do insert the record into Spectrum table set status_flag to 'A' for active else do update the record (replace all old values with new values) set status_flag to 'A' for active end-if
· If record from Master (Staging table) is null then do soft delete set status_flag to 'D' for delete end-if