I would like to fire a pre execution event, grab the name of the stored procedure (source of the sql task), insert a record with the name and datetime, and then fire a post event that would update the record with a modified dated.
What is the best way to capture the source value name in the execute sql task.
I'm writing a custom source component that reads data from a SharePoint list with dynamic mapping to output columns. It's my first custom component and it's based on several samples and tutorials from Internet
Output columns are not created by the component itself, they must be added by user at design time. The component makes dynamically an association between SharePoint fields and available output columns at run-time (based on an mapping table).
I made a very basic skeleton and I encounter a problem when I add a column to output: it has no datatype and when I try to set one I have an the error Property value is not valid, The component xxxxxx does not allow setting output column datatype properties.
Imports System
Imports Microsoft.SqlServer.Dts.Pipeline
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
<DtsPipelineComponent(ComponentType:=ComponentType.SourceAdapter,
DisplayName:="SharePoint Dynamic Assoc List Source",
[Code] ....
I'm having alot of trouble figuring out the proper way to log from inside my custom source adapter.
I couldn't find my useful information in MSDN, it mostly applies to logging from inside a script task.
I'd like to log my messages along with all the other SSIS package log entries, which I have going to the dts log table.
I'm assuming I should be using some functionality from Microsoft.SqlServer.Dts.RunTime, probably the LogProvider.
Can anyone advise?
I have a task where I'm dealing with Employee information. I load this data on a daily basis where I capture Name,Is_Active,Address information of the employee and I do truncate and load operation. Now I have a task to have a additional column called 'Statuschanged_dt' and have to capture the date when Is_Active changed from 'Yes' to 'No'. I know this can done in multiple ways like destination lookup, SCD and also CDC.
View 9 Replies View RelatedMy objective is to extract the source table data from SQL/Oracle or CSV files and load into destination table using CDC mechansim. May I know the steps required to implement in production from development.
View 3 Replies View RelatedHow to capture execute sql task results.
Example if the execute sql task runs select statment (select * from table)means , how do i capture into sql table.
I got a problem with a user who needs to log on to the integration services. The user ist is "sysadmin" on the SQL Server and I granted him rights in the DCOM configuration for MSSQL Integration Services (remote and local log-on and remote and local execute and start). But if the user trys to log-on to the integration services it says "Access denied", why.
View 9 Replies View RelatedI have a got a package with source as sql table which has got 50 columns. We are using only 10 columns out of this. Recently one column name has changed and thus throws error invalid mapping. When I open the source to do the changes noticed that all the colums are prselected now and also the datatypes got changed to default ( I had changed the datatypes as per my requirement while i developed). So now I had to select required columns from source and redo the datatype changes in advanced editor.Is there any option which doesnt disturb this settings and we just need to correct the mapping alone.
View 4 Replies View RelatedI ma having a package having 10 DFT Task.In Each DFT Task there are odd number of insert and update at the end
for example.
source>lookup>lookup1>lookup2>transformation>conditionalsplit>
1 New CurrYearMinus4 YEAR(ScheduleDepartDate) == (@[User::CurrentYear] - 4) && ISNULL(Run_Id)
2 New CurrYearMinus3 YEAR(ScheduleDepartDate) == (@[User::CurrentYear] - 3) && ISNULL(Run_Id)
3 New CurrYearMinus2 YEAR(ScheduleDepartDate) == (@[User::CurrentYear] - 2) && ISNULL(Run_Id)
4 New CurrYearMinus1 YEAR(ScheduleDepartDate) == (@[User::CurrentYear] - 1) && ISNULL(Run_Id)
[code]....
I need reflecting changes of csv file in oracle DB. Suppose, I load single csv file in oracle DB which contains 10 rows. After some time, I have loaded another CSV file which has the modified row of the previously loaded csv file. So, how can I capture the CSV changes and how it is going to get reflected in oracle DB?There is no unique column in csv file to identify particular row.
View 3 Replies View RelatedI have enabled SSIS logging for a Package.
Is it possible for SSIS logging to output the value of a variable.
Currently, it is only outputting the name of the variable, such as:"User::FilePath"
We run std 2008 r2. When I deploy and run a pkg from the catalog, how can I get that flat file system log we always instructed ssis to write to when we ran from the command line? I believe it was the /L param . Not sure at this point if i'll use sql agent or somehow employ task scheduler to kick off the pkg.
View 2 Replies View RelatedHave an SSIS package running great in 2008R2. It generates several flat files based on inline database queries. The first step of the package inserts a record into a log stats table and the last step of the package updates this record with the package name, run time and execution status. Now I need to add the records counts for each flat file to the log table.
Is there a way I can update one field for run counts with each of the counts for each file. So the [run counts] table column would look something like:
file1: 43522
file2: 645367
file3: 7883
Is it possible to store the record counts and flat file names in variables then concat them at the end when updating this record?
Or, is a better way to just insert/update a new record for each flat file step and log the counts for that file for its own record?
In either case, how I can capture the file count and pass that to the update statement.
In my package there are 10 DFT.
Each DFT have source > Tranformation > Conditionsplit > Rowcount_Transformation > Oledb Command
> Rowcount_Transformation1 > Oledb Command1
> Rowcount_Transformation2 > Oledb Command2
> Rowcount_Transformation3 > Oledb Command3
All update hapend on diffrent Table.I want to log in Audit table .
My audit table like
Table_Name Insert_count Update_count
How can I log the package having multiple OLEDB Destination.
So I have to make a fairly dynamic Data flow. I will get the most of the configuration from a database table. I will look up the name of the procedure to run as a source (I can use expressions or a script component source for this), I will lookup columns names from a database table.I can use expressions (maybe) or a destination script component for the destination including the destination table name and column names, these will be looked up in a database table.What I am not sure is how I will do the mapping. How can I make this dynamic? The logic for mapping will be in the database as well. Could I create a custom dataflow all in one script? A source, destination and mappings all in one script? Is there an example of this out there.my task ios to make the data flow completely dynamic.all config info would be kept in a SQL Server database.A complete custom script component dataflow task.
View 3 Replies View RelatedI recently read the project real ETL design best practices whitepaper. I too, want to do custom logging as I do today, and also use SSIS logging. The paper recommended using the variable system::PackageExecutionId to tie the 2 logging methods together.
View 4 Replies View RelatedI have a very basic / stripped connection manager with only one property (SSIS 2012). It works fine in design time (you can open the connection manager editor and change the value), but in runtime it only works in 32bit mode. The runtime-validate-method does work, but if everything validates OK then in 64bit it throws an error when you run the package:
Exception deserializing the package "The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The 2 VS projects are .Net 4 class library projects with the Build Platform on "Any CPU"
I only add references to:
Microsoft.SqlServer.ManagedDTS - C:WindowsMicrosoft.NETassemblyGAC_MSILMicrosoft.SqlServer.ManagedDTSv4.0_11.0.0.0__89845dcd8080cc91
Microsoft.SqlServer.ManagedDTS.dll
Microsoft.SqlServer.Dts.Design -
[code]....
I'm writing my first SSIS custom task. I have added Public properties, which appear in the standard task properties window, and to one of them I have added an EditorAttribute as follows:
<Category("General"), _
Browsable(True), _
EditorAttribute(GetType(UIFileNameEditor), _
GetType(System.Drawing.Design.UITypeEditor))> _
Public Property FilesToArchive() As String
[Code] ....
When I select the FilesToArchive property in the Properties window, I get an ellipsis that appears in the property value. When I click on the ellipsis, it brings up the FolderBrowserDialog, which is defined in the UIFileNameEditor class. This all works fine.
What I want to do is to bring up the EditorUI, the one you get when you double click on the task, and also populate that with properties which can be edited. I have a class which inherits DTSBaseTaskUI, which is displayed when I double click on the task.
I can also get properties to be displayed in that UI but I cannot get them to be editable in that UI, using the same technique as in the standard Properties window, as described above.
I have a requirement in which i have to create a custom .net class library for Ex:-I retrieve password(s) from a thrid party component. Below is what i am doing.
(1) Created a custom class library which reads a custom .xml file from a drive Ex:- "D:MyAppMYAppCofig.xml" and sets to my properties of my custom class library and inside it i created an instance of third party component's class and passed these values. Since i need to use this .net custom class library both in web and ssis/database side i am using this custom .xml file.
(2) After validating passed data (properties set in custom .net class library) the thrid party component instance object created in my custom .net class libraty returs a password to me own custom .net class libray.
(3) This password I use in my web app for connecting to database. This code is working fine.
(4) My question is how to execute a custom .net class library code through ssis and to use the my same custom .net class library and pass the password to my SSIS component / taks so that that code block also uses the returned password to connect and do any needed tasks? In other words how to use custom .net class library from SSIS.
My Environment is as follows:-
SQL Server is : 2008 R2
VS.NET 2013
Is it possible to capture the contents of THROW within a CATCH into a variable so that it can be written to a logging table?
I can capture ERROR_MESSAGE() to a variable but unfortunately it only writes the last error rather than the previous one that is informational.
I realize that THROW can be multiple lines so it may not be possible to do through TSQL but thought I should ask.
Hi All,
Please let me know whether we can use Teradata as Source in SSIS (Target is SQL Server 2005). ie. Do we have oledb driver for NCR Teradata to connect to it. Our SSIS will be hosted in 64 bit SQL, but for development we use 32 bit.
Any inputs is really appreciated.
Regards, kart
I am writing my first custom SSIS task and I can see that, if I put a public property into the task, I see that property in the standard Properties window. If I add a property of type String, I can put a value in that property, in the task code, and when I instantiate the task in a package, I can see the value I entered.
To try and get a drop down list property in the Properties window, I declared a property of type Combobox, and indeed a drop down list appears in that property.
My problem is trying to get values in that property. I have used the test items:
Property.Items.add("Fred")
Property.Items.Add("Jim")
But I do not see the values in the drop down list. All I do see is one item with a value of "(none)".
Hi everyone,
I've got a problem to retrieve data from a Xml Source.
Basically, I call a method from a Web Service which gives me a Xml file.
The problem is that the XML structure is not really good. But we can't touch it.
Here is the Xml File :
Code Snippet
<?xml version="1.0" encoding="utf-16"?>
<ArrayOfWSTargetVO xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<WSTargetVO>
<ProjectId>
<Value>131</Value>
</ProjectId>
<Id>
<Value>Toto</Value>
</Id>
<Name>
<Value>bateau</Value>
</Name>
</WSTargetVO>
<WSTargetVO>
<ProjectId>
<Value>131</Value>
</ProjectId>
<Id>
<Value>Tata</Value>
</Id>
<Name>
<Value>F35</Value>
</Name>
</WSTargetVO>
...
</ArrayOfWSTargetVO>
As you can see, for each WSTargetVO, we have a projectid, an id and a name. But the value is not directly put into these nodes but in a new one : <value>
That causes my problem because here is the xsd file generated by visual studio :
Code Snippet
<?xml version="1.0"?>
<xsd:schema xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema" attributeFormDefault="unqualified" elementFormDefault="qualified">
<xs:element name="ArrayOfWSTargetVO">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="unbounded" name="WSTargetVO">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="ProjectId">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="Value" type="xs:unsignedByte" />
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element minOccurs="0" name="Id">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="Value" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element minOccurs="0" name="Name">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="Value" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xsd:schema>
And when I try to use the outpul results from the Xml file, I can't see how I can get a datatable with three columns corresponding to projectid, id and name.
Integration Services only asks me to choose between WSTargetVO or ProjectID or Id or Name and give me the <value> value.
I don't know if it is possible to modifiy the contents of the XmlFile or something else using XPath.
Of course, if I try to modifiy the XSD file and delete the value node to have a simple structure, I see my three columns but i can't get any data.
I'm aware that the XML file is pretty bad but it is impossible for me to change it.
If somebody has an idea, I would be happy to hear it :-)
(I'm a beginner in Integration Services)
Thank you,
Radik
I'm having trouble using a Progress database as a source. I have an OpenLink driver installed and a System DSN set up. I can successfully test the connection. I added this DSN to the connection manager and added it to a DataReader Source. I then added the SQLCommand property. I was able to map columns and such, so I believe the SQLCommand was successfully parsed. However, when I try to save the DataReader Source, I get an error:
Error at Data Flow Task [DataReader Source [2266]]: System.Data.Odbc.OdbcException: ERROR [HY010] [OpenLink][ODBC][Driver]Function sequence error at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcDataReader.NextResult() at System.Data.Odbc.OdbcDataReader.Close() at Microsoft.SqlServer.Dts.Pipleline.DataReaderSourceAdapter.ReinitializeMetaData() at Microsoft.SqlServer.Dts.Pipleline.ManagedComponentHost.HostReinitialieMetaData(IDTSManagedComponentWrapper90 wrapper)
I have a Data Flow Task. I have one "OLE DB Source" which gets my data from a SQL Server Database. I have a second "OLE DB Source" which uses DATEADD to derive a date qualifier that I would like to use as a date qualifier in my subsequent Excel spreadsheet...opting to use SQL Server and DATEADD rather than messing around with VB syntax to get the previous week date qualifier.I am trying to connect the flow from one OLE DB Source to the next OLE DB Source and get the error..Component OLE DB Source has no inputs, or all of its inputs are already connected to other outputs. You may be able to edit the component to add new inputs to it.Can't I connect two completely different and independent SQL Server queries using "OLE DB Source" within my Data Flow?
Is there any way to store my derived date from my second "OLE DB Source" to a variable so that I cana then use that as my date qualifier within my Excel destination?
I have two servers (TESTSERVER, PRODSERVER). On the TESTSERVER i have a package that i'm using for data load from a source database on a SOURCESERVER. Everything works great until this point. Now from the PRODSERVER in the SSIS package i'm trying to create a connection in the connection manager to the SOURCESERVER and i'm getting the following error
Test connection failed because of an error in initializing provider. Login timeout expired.A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
I have one small requirement.. I want to load the different types of files(.txt, .csv, .tsv, .xlsx).
Using one forearch loop container how can I load the files to database and I shouldn't use the script task to split the filenames. Is there any other way to load all the files using forearch loop container, exesql task..
need to do data profiling on 3source tables .Can I use the data profiling task for it.
I am mapping the xml output to excel file using dataflow task.
I have ssis package that pull data from SAP (Using ADO.net connection) to SQL server every night but i have noticed that all data from source is not getting pulled by package . package losing some amount of row.
View 7 Replies View RelatedI am working on 1 POC project.I have 2 customer having source file in txt format, but the column sequence of both customer are diffrent.Number of columns in all files are like below.
CustA
ID NAME AGE
1 VIPIN 29
CustB
ID AGE NAME
2 29 jayesh
As per source file you can see that CustA have column sequence ID,NAME,AGE and CustB Have ID,AGE,NAME sequence .I have target table #Temp with ID,NAME,AGE sequence.Like that I have many files from both customer, I have to load in ID,NAME,AGE sequence from all source file to target table.How can we change the sequence of source column before loading to target table.
I have created a SSIS Package which does the incremental update using CDC Controls.
The design is similar to any standard CDC incremental package.
It has a CDC Start which sets the Mark Processing Range, a data flow and a Mark Processed Range.
The issue that i'm facing is that the CDC Source control time-out but i can still see rows moving from CDC Source to Splitter and target table. After the rows are transferred, the Data Flow task Fails which leads to package failure.
This results in Mark Processed Range not being executed.
So my query is
1. Why is CDC Source being time-out?
2. What can i do so that all three i.e Mark Processing Range, data flow and Mark Processed Range execute successfully or nothing does.
i want to use lookup transformation using Excel as a source.i am having two excel files .
file1 one of the column contains 'Andhrapradesh'
file2 one of the column contains 'ap'
here want to match these using lookup.
My package is having .csv file as a source and I kept OLEDB destination to load it.
Stored the .csv file in a shared folder and the exact path is given in Enumerator configuration of the foreach loop container. When I execute my package, it is giving the warning as below:
It is saying that file is not there in the specified path and directory is empty. I am running the SSIS package from TFS. I am sure that I have read and write access for the shared folder for my userID. Is there any access there to pick up this file from path.