I have 3 columns in my SharePoint list. I wasn’t to select the max date for a particular condition. How to write it in CAML?So from the below table I want to get the max date for column 1 when the value is A or B
View 3 RepliesWhat's the best way to write key values of records processed in my SSIS 2012 package to the log provider chosen?My SSIS package deactivates widgets as well as thingies. It was just released into production this week, runs daily, and we'd like to keep a close eye on what it's doing for a couple of weeks, by that I mean on any day be able to quickly see which thingies and widgets were deactivated that morning. It typically deactivates less than 5 widgets and thingies per day.
We could dig through the database to see which were deactivated, but that only works if somebody hasn't manually reactivated it since it was deactivated. We need a log. This is a temporary watch we're doing, so we don't want to write to a table or make make any significant package changes, such as adding new tasks.It seems like writing the 5-or-so deactivated thingy and widget key values to the log is the best way to watch this package. What's the most efficient way to do this? I'm hoping to avoid a new loop and script component with "Dts.Log" calls, but I don't know any other way.
I am using a OLE DB source task and i want to setup a parameter in the select statement. Is this possible and how would this be done. I know you can pass a parameter in the where clause like:
select id, lname, fname, startDate, endDate from Employee where id = ?
How would i set startDate and endDate as parameters as i would like to be able to change these parameters when running the package. I would like to set dates in the select statement as parameters like how you would in the where clause.
Select id, lname, fname, ? startDate, ? endDate, from employee where id = ?
I would like to be able to change these dates without having to go in to the package and hard code it back in there and then deploy.
The package uses a OLE DB source to Flatfile Destination.
I have a general question I need a few pointers or explanations. I have a top level Data Flow query in a SSIS package that has been running for years for which I have made some minor changes to pull additional fields and rectify a filter condition.
I have noticed that when I run this same query, exactly as entered in the Data Flow task, in the SQL Server 2012 Management Studio, the query returns some 105,000+ records but when run in development by executing the package the top level task only indicates some 21,000 records returned. Since there was not other transformations or filtering performed, I had expected the same record count and am not getting it.
I have defined a variable Var_Query_SQL and passed the below query using expression but it is showing error. where am i going wrong.
"SELECT
sample_id ,
sample_time ,
trans_date ,
product = mh.[identity] ,
comments = s.m_smp_comment
[URL] ...
I am querying OSI PI data using PI OLEDB source transformation in SSIS. When i write a simple query, data is coming. My requirement is to pass parameter to pull data from PI. When i do it the usual way of passing parameters, i get the following error:
"OLE DB Source failed the pre-execute phase and returned error code 0xC0202009"
This is my source query.
SELECT tag, time, value FROM PIAVG WHERE SUBSTR(tag,1,9) =? AND time > '20-Oct-15' and TIME <'29-OCT-15' AND TIMESTEP='1H'
where i am assigning a User::variable for the ?
I have around 500 packages (SQL 2005) deployed in file system & all this packages are running on daily basis via SQL agent. Now I need to migrated all 500 packages into SQL server 2008 R2.
There is no inventory to track which package belogs to which team and any other information.
Now, I need a method to query the pakages connection string details with database respective. Is there any method?
I have a requirement of migrating DTS package which is done in Sql Server 2000 to SSIS 2012.
I started with one package having data driven query task and done with source for which i chose OLE DB Source and given the required select query in ssis 2012
I'm stuck now and i'm unable to choose the relevant tools in ssis 2012 for binding, transformation,queries and lookup tabs used in dts 2000 for this DDQT.
We've two OLE DB sources under DFT. TableA from one OLE DB source brings ID's as ( 1, 3, 5 ) and TableB from another OLE DB source brings ID's as ( 0, 3, 6 ). Now would I be able to use merge component to get all non-matching ID's from both tables A & B and store in the OLE DB destination as ( 0, 1, 5, 6 ) [ 1 & 5 from TabelA and 0 & 6 from TableB ]If no, what other option I've to make this req. doable?
View 6 Replies View RelatedDefault code page in ETL package is 1252 which will not work if the collation is different e.g in Japanese_CI_AS, it is 932.
My question is how to write a generic ETL package so that it can cater any collation or any code page.
I have a Problem with my destinations. I have a split condition with two ways the flow can use.
In this case: all and Date.
All and Date can be set by using a variable. Its working good.
When a user fills the variable with a date value (cast to string) the conditional split executes the correct flow with all the needed rows... The same time the all flow will be executed with 0 rows. In the end the destionation file for the all values will be overwritten with nothing. The same on the other hand when a user fills the variable with the all value, the date file is empty. What can i do to make sure that the files are not empty?
in a SSIS 2012 pkg, I'm trying to specify a SELECT TOP ? myColumn FROM myTable inside an Execute SQL task, but unsuccessfully.Is it possible to parameterize the TOP clause?
View 6 Replies View RelatedIs it possible to do? I'm getting lock violations in I try to execute several tasks in parallel.
View 4 Replies View RelatedI want to achieve the following in (SSIS/SSDT for SQL 2012) -
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
I have a requirement like below .
Input table will be like below:
eventdata:
accountID deviceID timestamp speedKPH address
--------- -------- ---------- -------- -------------
preva1 bolero 1359089006 15 Ullalu Road
preva1 bolero 1359088796 0 Ullalu Road
preva1 bolero 1359088886 0 Ullalu Road
preva1 bolero 1359088888 8.47 Ullalu Road
preva1 bolero 1359088986 0 Ullalu Road
preva1 bolero 1359088988 45 Ullalu Road
preva1 bolero 1359088996 21 Ullalu Road
preva1 bolero 1359088998 0 Ullalu Road
preva1 bolero 1359089006 15 Ullalu Road
preva1 bolero 1359089009 12 Ullalu Road
preva1 bolero 1359089006 15 Ullalu Road
preva1 bolero 1359089016 0 Ullalu Road
preva1 bolero 1359089026 0 Ullalu Road
So here i need output table like below:
stoppagedetails:
accountID deviceID from_timestamp to_timestamp diff
--------- -------- ---------- -------- -------------
preva1 bolero 1359088796 1359088888 92
preva1 bolero 1359088986 1359088988 2
preva1 bolero 1359088998 1359089006 8
preva1 bolero 1359089016
How to write mysql query for the above requirement.
i want to select the values of column passed from the user like
connectionsizein or connectionsizemm
how can i do
i am using sql server 2005
Hi,
I want to insert datas from a txt-file into a sql-table.
Therefor i would use a xml-file for the structure!
How can i refer this xml-file to a measurement insertion task?
Tanks for your help and sorry for my bad english :rolleyes:
I want to use UDF in SSIS where function accept 4 parameter value and return 1 value.
How can i achieve that. I need workflow.
Can Somebody please show me how to acheive this, using the order details in Northwinddatabase or any other good example. as much details as possible. Many Thanks!
View 6 Replies View RelatedHow to achieve the below condition in ssis
if person_id is like '123%' or '124%'
then details='xyz'
else details='yxz'
if there is any way to accurately size a single server using SSIS. The server will be a virtual machine. The data being loaded will be approximately 200 MB per load with loading to a 150 GB database on a separate server.
View 3 Replies View RelatedI have scheduled SSIS package through Sql Agent and when I right click on job start job as step package runs successfully but when I schedule job it dosent run.
View 12 Replies View Related
Can anyone help regarding the SQL server integration Services(SSIS), ETL
We have requirement like this:
We have Live Database( LIVE_DB ) and Reports Database (REP_DB)
I want to trasfer the few tables data from LIVE_DB into the REP_DB for end of the day using SSIS
If any new records are added, updated or deleted in LIVE_DB, these should reflect in the REP_DB, Our requirement is not to delete the old data, we should append or delete or insert the new transaction data in REP_DB.
Thanks in advance, if anyone help me in resolving this issue.
Regards,
Bhushanam.
I have a maintenance plan which consist db full backup and log backup ( in two subplans), I execute both on SQL agent, and both failed.The DB Log Backup : DB FULL BACKUP LOG:
View 14 Replies View RelatedI want to get output of below query in single row.
Select 'Name'
Select 'Surname'
Expected output is Name,Surname
Basically I'm running a number of selects, using unions to write out each select query as a distinct line in the output. Each line needs to be multiplied by -1 in order to create an offset balance (yes this is balance sheet related stuff) for each line. Each select will have a different piece of criteria.
Although I have it working, I'm thinking there's a much better or cleaner way to do it (I use the word better loosely)
Example:
SELECT 'Asset', 'House', TotalPrice * -1
FROM Accounts
WHERE AvgAmount > 0
UNION
SELECT 'Balance', 'Cover', TotalPrice
FROM Accounts
WHERE AvgAmount > 0
What gets messy here is having to write a similar set of queries where the amount is < 0 or = 0
I'm thinking something along the lines of building a table function contains all the descriptive text returning the relative values based on the AvgAmount I pass to it.
I have a ssis package with an oledb connection using windows authentication. i want to understand when i promote this package to the server and add it to a job, then a user login to the server with sql server authentication and run this job. Which/what windows authentication this package gonna to use to connect to the server ?
View 3 Replies View Relatedconverting seconds to HH:MM:SS using SSIS. I know how to do it in T-SQL.
View 13 Replies View RelatedI have installed VS community edition 2013 on a widows 7 PC. When I try to create a ssis package the ssis tool bar comes up empty.It just says "loading" on the panel .
View 2 Replies View RelatedWin 7 SP1 x64 PC. I installed SQL Server 2014 Dev Edition + Visual Studio 2015.
I'd like to create some basic ETL SSIS packages, and I worked very comfortably in 2008R2.
For 2014, I started with this tutorial:[URL]However, it says to go to Start->All Programs->Microsoft SQL Server->SQL Server Data Tools.
I did explicitly install SSDT when I installed VS2015. I also installed it separately. I see SSDT listed in Programs, and SSIS is running according to SQL Server Config Manager, and Services. Half of Microsoft's docs seem to be 2012 era, which is a shame because 2014 is out and it's nearly 2016...
how do I get to the GUI where I can design ETL packages?
We'll be using 2014 enterprise to populate some excel spreadsheets. We may not have the option of using ssrs so here is the question.
The excel spreadsheets have some pretty fancy heading structures, multiple tabs and in a few cases graphs that i'm sure are dependent on data sitting somewhere in the spreadsheet. The heading have variable info in them (eg FYxx where xx is a parameterized fiscal year, month names etc). Sometimes those headings have sub headings (with variable info) and so on.
Generally speaking how (if at all) do folks deal with this kind of excel challenge when limited to using ssis? I don't know if templates are going to be a good idea. I don't know if i'll be looking at a fair amount of c# etc code behind the scenes. I can be more specific depending on the feedback.
This is part of a conversion from 2 of the larger BI and statistical tools out there to the MS sql stack. Obviously with some shortcuts that we may wish we didn't take.
we have a table with xml column. This column has a large xml data . I am trying to use ssis to import xml from sql column (table a) to destination (another table).
steps which i did in ssis:
1. execute sql task:
fetch the xml column by query and store "full result set" into an object variable.
2. foreach loop:
select Ado enumerator option and select variable which has reset set of execute sql task. In variable mapping selected a new variable of type string.
when I run package I get below error:
"Error: ForEach Variable Mapping number 1 to variable "User::variable" cannot be applied".
Have Visual Studio 2008 R2 with SP 2 installed. Due to a merger we now have a MySQL database that we need to update from SSIS. Everything works except for the table insert or update. Would upgrading to SP 3 or SP 4 maybe useful with that?
We have installed the latest driver from MySQL. Have tried the ADO.Net and ODBC drivers with similar results when we try to update the database.