CASE WHEN [MAIN_GAME] IS NULL AND combo.[CAT_PRODUCT] ='25' THEN 'Standalone' WHEN [MAIN_GAME] IS NULL AND combo.[CAT_PRODUCT] <> '25' THEN 'No main game' ELSE LOWER(prod.[TX_PRODUCT_NAME]) END AS [TX_MAIN_GAME]
I have an SSIS package in which I need to include a derived column. I've done derived columns a ton when there is just one condition being "tested". In this case there are two. I have the following update statement for a table I'm inserting data into:
UPDATE STAGING_DIM_AR_INVOICE SET SC_CODE = ( CASE WHEN REC_TYPE = 'P' AND SC_CODE IS NULL THEN 'ag' WHEN REC_TYPE = 'I' AND SC_CODE IS NULL THEN 'OL'
[Code] ....
I'd like to be able to address this case on the load itself. I've used CONDITIONAL before, but not sure how that would work in this case. I'm trying to keep it as "simple" as possible.
I am using a OLE DB source task and i want to setup a parameter in the select statement. Is this possible and how would this be done. I know you can pass a parameter in the where clause like:
select id, lname, fname, startDate, endDate from Employee where id = ?
How would i set startDate and endDate as parameters as i would like to be able to change these parameters when running the package. I would like to set dates in the select statement as parameters like how you would in the where clause.
Select id, lname, fname, ? startDate, ? endDate, from employee where id = ?
I would like to be able to change these dates without having to go in to the package and hard code it back in there and then deploy.
The package uses a OLE DB source to Flatfile Destination.
I need to run a different select statement based on the value of a parameter. Visual studio is not liking how I am formatting it.
SELECT mc.CtrlID, mc.PrtfID, mc.PrtfTyp, mc.City, mc.STATE, mc.U_O_AND_M, mc.CHBBal, mc.IRG_Number, mc.PrtfName, mc.LnID, mc.UPB, mc.UPB_Master_Loan, aa.Prtf_FNMA_FHLMC_Other , aa.ReportingSummar FROM vw_XXX_GIAC mc INNER JOIN vw_XXX_InvestorMatrix aa on mc.CtrlID = aa.CtrlID WHERE case when @PortfolioID=1 THEN aa.Prtf_FNMA_FHLMC_Other ='FNMA' @PortfolioID=2 THEN aa.Prtf_FNMA_FHLMC_Other ='FHLMC' @PortfolioID=3 THEN aa.Reporting Summar ='FLOW' END
I want to achieve the following in (SSIS/SSDT for SQL 2012) -
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
I have an T-SQL statement that runs in under 4 minutes on the Management Studio, and freezes forever in Integration Services. The statement ran fine before in both places, as well, but now I'm running on x64 OS with everything 64 bits including SQL.
The statement is this:
DECLARE @data datetime set @data = DATEADD(DAY,-1,DATEADD(YEAR,-1, GETDATE()))
INSERT INTO TempDateModelo (Data) (SELECT Data FROM [tPosting Date] a WHERE a.Data>=@data)
UPDATE fModelo SET [Vendas MM Anterior]= (SELECT SUM(b.[Custo Vendas]) FROM fValues b WHERE (b.[Posting Date] BETWEEN DATEADD(YEAR,-1,DATEADD(DAY,-27,fModelo.[Posting Date])) AND DATEADD(YEAR,-1,fModelo.[Posting Date])) AND b.[Item Department]=fModelo.[Item Department] AND b.[Centro Custo]=fModelo.[Centro Custo])
UPDATE fModelo SET [Vendas MM Posterior]= (SELECT SUM(b.[Custo Vendas]) FROM fValues b WHERE (b.[Posting Date] BETWEEN DATEADD(YEAR,-1,fModelo.[Posting Date]) AND DATEADD(YEAR,-1,DATEADD(DAY,27,fModelo.[Posting Date]))) AND b.[Item Department]=fModelo.[Item Department] AND b.[Centro Custo]=fModelo.[Centro Custo])
UPDATE fModelo SET Dia = DATEPART(DAY, [Posting Date]), Mes = MONTH([Posting Date])
if there is any way to accurately size a single server using SSIS. The server will be a virtual machine. The data being loaded will be approximately 200 MB per load with loading to a 150 GB database on a separate server.
I have scheduled SSIS package through Sql Agent and when I right click on job start job as step package runs successfully but when I schedule job it dosent run.
Can anyone help regarding the SQL server integration Services(SSIS), ETL We have requirement like this: We have Live Database( LIVE_DB ) and Reports Database (REP_DB) I want to trasfer the few tables data from LIVE_DB into the REP_DB for end of the day using SSIS If any new records are added, updated or deleted in LIVE_DB, these should reflect in the REP_DB, Our requirement is not to delete the old data, we should append or delete or insert the new transaction data in REP_DB.
Thanks in advance, if anyone help me in resolving this issue.
I have a maintenance plan which consist db full backup and log backup ( in two subplans), I execute both on SQL agent, and both failed.The DB Log Backup : DB FULL BACKUP LOG:
I have a ssis package with an oledb connection using windows authentication. i want to understand when i promote this package to the server and add it to a job, then a user login to the server with sql server authentication and run this job. Which/what windows authentication this package gonna to use to connect to the server ?
I have installed VS community edition 2013 on a widows 7 PC. When I try to create a ssis package the ssis tool bar comes up empty.It just says "loading" on the panel .
Win 7 SP1 x64 PC. I installed SQL Server 2014 Dev Edition + Visual Studio 2015.
I'd like to create some basic ETL SSIS packages, and I worked very comfortably in 2008R2.
For 2014, I started with this tutorial:[URL]However, it says to go to Start->All Programs->Microsoft SQL Server->SQL Server Data Tools.
I did explicitly install SSDT when I installed VS2015. I also installed it separately. I see SSDT listed in Programs, and SSIS is running according to SQL Server Config Manager, and Services. Half of Microsoft's docs seem to be 2012 era, which is a shame because 2014 is out and it's nearly 2016...
how do I get to the GUI where I can design ETL packages?
We'll be using 2014 enterprise to populate some excel spreadsheets. We may not have the option of using ssrs so here is the question.
The excel spreadsheets have some pretty fancy heading structures, multiple tabs and in a few cases graphs that i'm sure are dependent on data sitting somewhere in the spreadsheet. The heading have variable info in them (eg FYxx where xx is a parameterized fiscal year, month names etc). Sometimes those headings have sub headings (with variable info) and so on.
Generally speaking how (if at all) do folks deal with this kind of excel challenge when limited to using ssis? I don't know if templates are going to be a good idea. I don't know if i'll be looking at a fair amount of c# etc code behind the scenes. I can be more specific depending on the feedback.
This is part of a conversion from 2 of the larger BI and statistical tools out there to the MS sql stack. Obviously with some shortcuts that we may wish we didn't take.
we have a table with xml column. This column has a large xml data . I am trying to use ssis to import xml from sql column (table a) to destination (another table).
steps which i did in ssis:
1. execute sql task:
fetch the xml column by query and store "full result set" into an object variable.
2. foreach loop:
select Ado enumerator option and select variable which has reset set of execute sql task. In variable mapping selected a new variable of type string.
when I run package I get below error:
"Error: ForEach Variable Mapping number 1 to variable "User::variable" cannot be applied".
Have Visual Studio 2008 R2 with SP 2 installed. Due to a merger we now have a MySQL database that we need to update from SSIS. Everything works except for the table insert or update. Would upgrading to SP 3 or SP 4 maybe useful with that?
We have installed the latest driver from MySQL. Have tried the ADO.Net and ODBC drivers with similar results when we try to update the database.
I have a ETL ( SSIS ) Process in which i am loading around 150 tables in each run. ( Truncate and Insert ). I have four packages each from different sources. ( Each package loads different tables and different numbers )These are run on weekly basis one after the other. Each package is taking around 60 to 90 minutes each. Now i want to track the progress of the ETL on my front End application.
We want this in two ways.
First Way : I need to show the user how much percent of ETL Process is completed
Second Way : I need to show the No of tables completed and how many rows have been completed in the ongoing table ( which is in process )
Im newto SSIS. I want to develop package for data validation.
FirstName
1. Mandatory field checking: if Null, reject the record 2. If field length > 50, then reject the record
SSN
1. If field length > 12, then reject the record 2. If SSN is not in valid format, issue warning and process rhe record without SSN value. 3. Valid format: 9 digit numeric values should present after striping off all non-numeric characters. 4. Only send 9 digits to MDM
Like these i have 30 rules. And I have to shop the error msg if the validation fails like "Mandatory feild is missing".
I'm unable to find a solution to this truncation error on google.This happens only on one field which has comments. The offending Excel row/column has text that was entered in two lines i.e they entered the data and pressed "enter" and wrote a new line in the same row.Im using an Excel file source in SSIS and an OLEDB Destination (SQL Server) but one column keeps erroring out and I have tried to do the following:
1) Change output column width in advanced editor (still errors)
2) Data conversion tool between the source and destination (still errors)
I have created SSIS package where it generates .txt output file. But my client added new requirement that generated .txt has to be convert into excel or CSV (Depends on client selection on portal where it stores values in table to know in which format they requires).
Until now I've been looking for a possible solution to the execution of a sp from SSIS, but anything seems to work. I´ve got a sp: CREATE PROCEDURE [DBO].[SPIDENTIFIERS] @IDENT NVARCHAR(MAX) OUTPUT
What I need is to save the result in a variable that I've created in SSIS. This is the configuration that I used to try to do it.In the parameter set section I have also used the Direction as Output or ReturnValue but I received a error message. Just to try I put a Script Task to chek the value, but as you can see this is empty.With the Direction Ouput or ReturnValue I've got this:
[Execute SQL Task] Error: Executing the query "EXECUTE spIdentifiers ? OUTPUT;" failed with the following error:
"El valor no está dentro del intervalo esperado.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
The attached image below shows the steps and its set up to fail if not successful.However there was a metadata validation issue in step one (underlying database field had changed), yet the job kept emailing stating it was successful.It appears to have just carried on with the other steps despite step one failing.