Hi All,
Is there any way to remove the My Subscription,Site Setting links on the main page in Report manager.And also our client wants SSRS reports to be seen by his customer over the internet.Anybody knows about this?
Any help will be appreciated.
Thanks
Anupama
I created a subreport1 with tablix.I created second subreport2 that has a tablix and one column chart and both are placed in a rectangle. No page break is applied to this rectangle. When I run the sub report, both tablix and Column chart are displayed on one page .
I created a main report and added Subreport 1 and Subreport 2 in 2 different rectangles. I set page break property of Rectangle(Subreport1) to End and no page break is applied to Rectangle of Subreport2.Â
When I run the main report, subreport1 is displayed in one page, subreport2 is displayed in 2 different pages.
Hi All,
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Any Solution?
Thanks and Regards
Pragash
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports
Report that links to another report
Both reports return more than one page
Reporting Services installed
Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
Hi
Can anybody tell me that how can i configure the things that will show my main report page when i enter Url like http://localhost/ReportServer. It gives directory struction first & then we have to select particular report
Rajnish
please help, when I access my report and click on the subscription tab, on the top page i only see the "new subscription" button. I also tried creating a data driven sub in sql manger but it was disbaled. please help how to correct this one.
thanks
This should be an easy one...
You get an email that contains a link to a report. The email was sent automatically as part of a subscription.
Does that link point to a snapshot that was taken when the report was run, or does clicking the link cause the report to re-run altogether?
Thanks,
Dan
I have set up a test subscription that sends an email that includes both the report and the url link to the report. However, the report does not render when user clicks on url link in subscription email. The parameter toolbar sorta appears at top of page but buttons are not showing correcty. I saw similiar issue posted in another forum but no one had resolved yet. We all noticed that the subscription email uses /reportserver folder instead of /Reports folder.
The report does appear fine in the email so I believe the problem is the URL.
Can anyone tell me how to resolve?
Thanks,
Tammy
The URL from Report Manager is
http://dss0vw037.svr.us.jpmchase.net/Reports/Pages/Report.aspx?ItemPath=%2fIOC+Metrics%2fDCS+Emergency+Contact+List
The URL in subscription email
http://dss0vw037.svr.us.jpmchase.net/reportserver?%2fIOC+Metrics%2fDCS+Emergency+Contact+List&rs%3aParameterLanguage=en-US
Hi there,
Some months ago, we migrated our SQL Server Reporting services server from Server 'Alpha' to server 'Bravo'. I thought we performed all of the steps needed to accomplish this task based on various Microsoft Articles that we identified. The fact that everything has been running fine (we thought) for the last several months confirmed our belief that everything was done.
Our problem found the other day is with a report 'Subscription'. The other day, a user called me and said their subscription is coming to them fine with the report displayed, but the link to re-run the report at the bottom of the e-mailed document doesn't work. I looked at the e-mail they received and found that the link had 'http://alpha/reportserver/...' instead of 'http://bravo/reportsserver/...'. Since 'Bravo' is the name of the new server, I new something was a miss. I tried creating a new subscription to a report and the result was the same 'http://alpha/reportserver/...' I've looked high and low in the SQL Reporting services configuration and can not figure out where I missed a change from 'Alpha' to 'Bravo'.
Has anyone seen anthing like this? If you can help me out it would be greatly appreciated. Thanks! - Eric-
Dear All,
I deleted a replication in the PROD server. However, the subscription info still exists in the subscription folder in the DR server.
Can anyone tells me how to remove the subscription info? (When I delete the publication, there's a message saying we need to manually delete the subscription info in the subscriber)
I'd tried restart the SQLAgent service, Disabling Publishing in PROD server but it's useless.
thanks first.
rgds.
Hi,
I am sure there is a thread about that one but I cannot find it.
I have a server which does not include the correct link with the subsciptions.
I create a subscription and ask to include the link to the reporet, I get the report with the machine name instead of the DNS name.
i.e. i get
The report is accessible at the following address:
http://atlanta/reportserver/...
instead of http://reporting.onsemi.com/reports/....
I tried to edit rswebapplication.config like that
<ReportServerUrl>reporting.onsemi.com</ReportServerUrl>
and rsreportserver.config like that
<DefaultHostName>onsemi.com</DefaultHostName>
but still cannot get the correct URL in the subscription.
Any idea?
Thanks,
Philippe
When I set up an email subscription for a report, I can get the email notification if I only include a link to the report, but get the generic "Failure sending mail: The report server has encountered a configuration error. See the report server log files for more information." error message when I attempt to include the actual report in the email; either as "Web Archive," or PDF." When I consult the ReportServer log file, I do not see any sort of exception that would indicate the true source of the error.
I have set the file security on the RSTempFiles folder to allow the IIS_WPG group to modify the folder, but when I looked into the RS config files, it looked as though SSRS wasn't configured to use temporary storage.
Any suggestions?
-Matthew
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
I hope someone can help as I have searched for a solution but been unable to find one as yet.
My problem is that after installing SharePoint V3.0 and amending the Report Server to <ServerName>:8080, as I don't yet wish to use integrated mode, everything works fine except email delivered subscriptions. The URL in the email body referencing the report only puts in <ServerName> etc. omitting the port number :8080. I have tried to find where this URL link is built-up from but have had no luck in the report manager, report services configuration and the config files, does anyone know where I need to look and if possible what I need to amend to have the link include :8080 after the servername portion of the URL. I can copy the URL and manually insert the port address and it works but this defeats the object of automated subscriptions.
Sorry if this is a dumb question but it is giving me a headache at the moment.
All answers gratefully received,
Andy
Hi,
We have created replication from one production server to another backup server by using SQL scripts. These scripts have been generated by SQL Server after manual initial setup. When I ran these scripts they did not add the subscription for the backup server because a stored procedure were missing named something like sp_addsubscription. Therefore I ran the script on the production server and created the subscription manually on the backup server. But I made an error, I created a push subscription first but I should have created a pull subscription. Now I can't delete the push subscription. I don't even get a error message. I can't press delete and when right clicking on it I can only choose Help. The subscription has the following properties:
Type: push
Status: retrying
Last action: The process could not connect to distributor 'PSERV'
Replication type: Snapshot
Anyone know how I can delete this push subscription on my backup server?
Best,
/M
Hi all,
I'm a rather newbie, not only to this forum but also to sql server having a question to the following issue:
Is it possible to drop/remove/delete the "orphan" of a merge subscription on one instance of sql server without having the (former) distributor/publisher (on other instance) available?
The background is: I had a small replication infrastructure with two instances (on two machines), one the publisher and distributor, the other the subscriber. Now it happened that the publisher/distributor machine was completely set up new without having the replication dropped in advance, what remained on the subscriber is now a database with all the merge/replication tables and the guid columns in the user tables.
Moreover this, an entry remained in the subscription saying that a subscription with the former publisher exists...
Can I remove these "orphans" without having to setup the instance again?
Thank you,
Andy
Hello,
I think I may be going a little bit mad. Last week I created a database on SQL Server. I then created an access database on a different windows server, and set up an ODBC connection on that windows server to my database on SQL Server. I then set up linked tables within Access to point to my tables on the SQL Server. I'm fairly sure that I opened those links at the time and managed to display and update the data from Access. However I have come to this today and when I go into the Access database and attempt to open one of the links I get a connection failed message. When I check the ODBC connection on the windows server it is fine. Does anyone have any ideas on this? I really need this to be working by tomorrow to do a demo, and I'm so convinced it worked last week I am a little bemused!
Many many thanks in advance of your wonderful and prompt replies!!! :)
Paula
Hi Folks,
Somehow i am stuck at a very basic step. I have two pages -
1. DomainList.aspx which just displays all the records from the Domains table.2. DomainAddEdit.aspx which displays the selected record in FormView(Edit Mode) with two link for Update and Cancel.
The Update link in the FormView does nothing on the first click. It just reloads the page with the new data I entered. If I click again on the Update link, it throws me an error:
"Cannot insert the value NULL into column 'DNS', table 'MSInteractive.dbo.Domains'; column does not allow nulls. UPDATE fails.The statement has been terminated. "
I have no clue why all this is happening. I have spent more than two days on this and this is very very frustrating.
Just to mention, I haven't written any code for this. Its developed all using the VWD tools available. I have posted this message earlier but haven't got any response. I am sure most of you guys must have been doing these steps everyday. So, please post your thoughts.
Thanks a million.
Here is the relevant code for my DomainADDEdit.aspx:
<asp:FormView ID="FormView1" runat="server" DataSourceID="SqlDataSource1" DefaultMode="Edit"> <EditItemTemplate> Id: <asp:TextBox ID="IdTextBox" runat="server" Text='<%# Bind("Id") %>'></asp:TextBox><br /> RegistrarAccountId: <asp:TextBox ID="RegistrarAccountIdTextBox" runat="server" Text='<%# Bind("RegistrarAccountId") %>'></asp:TextBox><br /> Registrar: <asp:TextBox ID="RegistrarTextBox" runat="server" Text='<%# Bind("Registrar") %>'></asp:TextBox><br /> DNS: <asp:TextBox ID="DNSTextBox" runat="server" AutoPostBack="True" OnTextChanged="DNSTextBox_TextChanged" Text='<%# Bind("DNS") %>'></asp:TextBox><br /> EmailHost: <asp:TextBox ID="EmailHostTextBox" runat="server" Text='<%# Bind("EmailHost") %>'></asp:TextBox><br /> Registered: <asp:TextBox ID="RegisteredTextBox" runat="server" Text='<%# Bind("Registered") %>'></asp:TextBox><br /> Expires: <asp:TextBox ID="ExpiresTextBox" runat="server" Text='<%# Bind("Expires") %>'></asp:TextBox><br /> MsiResponsible: <asp:CheckBox ID="MsiResponsibleCheckBox" runat="server" Checked='<%# Bind("MsiResponsible") %>' /> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:MSInteractiveConnectionString %>" SelectCommand="SELECT [Id], [RegistrarAccountId], [Registrar], [DNS], [EmailHost], [Registered], [Expires], [MsiResponsible] FROM [Domains] WHERE ([Id] = @Id)" UpdateCommand="UPDATE Domains SET DNS = @txtDNS WHERE (Id = @Id)"> <UpdateParameters> <asp:FormParameter FormField="DNSTextBox" Name="txtDNS" /> <asp:QueryStringParameter Name="Id" QueryStringField="Id" /> </UpdateParameters> <SelectParameters> <asp:QueryStringParameter Name="Id" QueryStringField="Id" Type="String" /> </SelectParameters> </asp:SqlDataSource><br /> <asp:LinkButton ID="UpdateButton" runat="server" CommandName="Update" Text="Update" OnClick="UpdateButton_Click"></asp:LinkButton> <asp:LinkButton ID="UpdateCancelButton" runat="server" CausesValidation="False" CommandName="Cancel" Text="Cancel"></asp:LinkButton> </EditItemTemplate>
Hello,
I want read only connection to Sybase server from MS SQL Server 2000. I think Link server should be best solution. Can anyone guide me as help shows link of Oracle but not sybase. any help is apreciated.
I've written following on creating link server from ER
ProductName : Sybase ASE
Datasource : Server A
providerstring: DRIVER={Sybase.ASEOLEDBProvider};SERVER=unixbox,45 10;UID=sa;PWD=abc1411'
Thanks A Lot
Hello,
Can anyone guide me how to create link server to sybase from MS SQL Server 2000 cluster.
Thanks
Sejal
Hi there folks,
was just wondering if there was an easy way to include a files contents into a web page via a database field. A bit confusing i know.
Here goes:
I got a field called ContentPage stored in a database. (e.g Index.htm)
I want to retrieve this page and then include its contents in my middle div of the webpage like so: <!--#include file="<%=ContentPage%>"-->. Not allowing me to do this as you may have guessed. These pages will either be htm or aspx pages. This would make my life so much easier.
Is there any way of doing this or am i kidding myself.
Would appreciate any help.
Paul
I've a database in 2000 which needs to be accessed from 2005 via linkedserver. I've tried the GUI options and it is failing. One thins is that ourboth servers have hyphen('-' not underscore, could that be a problem) in thenames, like 2k-srv and 2k5-srv as hosts, but the instances are default.Can anyone give me the steps please.TIANasir
View 4 Replies View RelatedI searched the forum, but I was unable to find an answer to this. What I want to do is remove the page breaks (horizontal lines) from the web archive, but I've been unable to find anything on the internet about it.
Does anyone have any advice/suggestions? Thanks in advance.
Hi,
I have a .net application in this application I want to call directly subscription page of a perticular Report through URL.
And i want to hide the header section too.Is it possible
If not how can i provide this feature of subscription in my application
Regards
How to add a link to the child report in the page header section of a report in SSRS 2005 ?Basically I want a link to the child report which should appear on all the pages of the report if the report has multiple pages.
I cannot see to find how to uninstall SQL 6.5 client from a users PC..
Please can somone advise..
Many Thanks
Darren
Hi everyone -
I need to remove the formatting characters
from the phone field in the database.
The data entry scrubber did not perform correct,
and now, a LOT of records have the ( in the field.
Is there a quick way to remove the ( from the field in the database??
MSSQL 2000
thanks
tony
I am extremely new with .asp. We have the .net framework 1.1 installed on our server and the following query works in Crystal Reports (older version). We would like to have this converted to a .asp page with two inputs. One for the date range and one for the state. Can someone please tell me how to go about this. I do have downloaded as test. Visual Studio 2003.net and Web Matrix. I really am looking for (if there is any) a way to pretty quickly convert query to web pages so users can use them without a huge expense. IF someone already has something like this done. That would be great. The following query is for Visual Enterprise (Manufacturing software). Thanks
SELECT
SHIPPER."CUST_ORDER_ID", SHIPPER."SHIPPED_DATE", SHIPPER."INVOICE_ID",
SHIPPER_LINE."USER_SHIPPED_QTY", SHIPPER_LINE."SHIPPED_QTY", SHIPPER_LINE."UNIT_PRICE",
RECEIVABLE_CURR."CURRENCY_ID", RECEIVABLE_CURR."SELL_RATE",
CUST_ORDER_LINE."PART_ID", CUST_ORDER_LINE."ORDER_QTY", CUST_ORDER_LINE."USER_ORDER_QTY",
INVENTORY_TRANS."TYPE", INVENTORY_TRANS."ACT_MATERIAL_COST", INVENTORY_TRANS."ACT_LABOR_COST", INVENTORY_TRANS."ACT_BURDEN_COST", INVENTORY_TRANS."ACT_SERVICE_COST",
CUSTOMER_ORDER."CUSTOMER_ID", CUSTOMER_ORDER."SHIP_TO_ADDR_NO", CUSTOMER_ORDER."CURRENCY_ID",
PART."DESCRIPTION", PART."STOCK_UM",
CUSTOMER."STATE",
CUST_ADDRESS."ADDR_NO", CUST_ADDRESS."NAME", CUST_ADDRESS."STATE"
FROM
{ oj ((((((("VMFG"."dbo"."SHIPPER" SHIPPER INNER JOIN "VMFG"."dbo"."RECEIVABLE_CURR" RECEIVABLE_CURR ON SHIPPER."INVOICE_ID" = RECEIVABLE_CURR."INVOICE_ID") INNER JOIN "VMFG"."dbo"."SHIPPER_LINE" SHIPPER_LINE ON SHIPPER."PACKLIST_ID" = SHIPPER_LINE."PACKLIST_ID" AND SHIPPER."CUST_ORDER_ID" = SHIPPER_LINE."CUST_ORDER_ID") INNER JOIN "VMFG"."dbo"."INVENTORY_TRANS" INVENTORY_TRANS ON SHIPPER_LINE."TRANSACTION_ID" = INVENTORY_TRANS."TRANSACTION_ID") INNER JOIN "VMFG"."dbo"."CUSTOMER_ORDER" CUSTOMER_ORDER ON SHIPPER_LINE."CUST_ORDER_ID" = CUSTOMER_ORDER."ID") INNER JOIN "VMFG"."dbo"."CUST_ORDER_LINE" CUST_ORDER_LINE ON SHIPPER_LINE."CUST_ORDER_ID" = CUST_ORDER_LINE."CUST_ORDER_ID" AND SHIPPER_LINE."CUST_ORDER_LINE_NO" = CUST_ORDER_LINE."LINE_NO") INNER JOIN "VMFG"."dbo"."CUSTOMER" CUSTOMER ON CUSTOMER_ORDER."CUSTOMER_ID" = CUSTOMER."ID") INNER JOIN "VMFG"."dbo"."PART" PART ON CUST_ORDER_LINE."PART_ID" = PART."ID") LEFT OUTER JOIN "VMFG"."dbo"."CUST_ADDRESS" CUST_ADDRESS ON CUSTOMER_ORDER."CUSTOMER_ID" = CUST_ADDRESS."CUSTOMER_ID" AND CUSTOMER_ORDER."SHIP_TO_ADDR_NO" = CUST_ADDRESS."ADDR_NO"}
WHERE
SHIPPER."SHIPPED_DATE" >= {ts '2002-08-01 00:00:00.00'} AND
SHIPPER."SHIPPED_DATE" < {ts '2004-08-25 00:00:00.00'}
ORDER BY
SHIPPER."SHIPPED_DATE" ASC
Hi
When i use my insert-exec in my proc, say it Y, and the inner proc is X (don't contain an other insert-exec). when i call the Y proc in sql query analyzer the call is executed and it get me back results.
But when I call the Y proc from an ASP page, the execution is aborted, and I don’t know why, I have tested many thinks but it doesn’t work (for exp: the use commit transaction, set ....).
Please could you tell me if i miss some things i should add to my procs for the IIS web server could have right to execute my Y proc
Configuration of my application
- IIS Web server 6.0
- Sql Server 2000 SP 2.0
- TSQL as a sql language (of course)
- ASP as web porgramming language
- The call of the insert exec proc is as following:
o INSERT INTO #TMP_F_B (
o Field1 ,
o Field2,
o Field3 ,
o …,
o )
o EXEC dbo.ps_a5s_rpt_charge700 @util, @annee , @perimetre , @secteur , @poste , @fournisseur , @err , @lib_err
Many thanks
Sincerly
I have a report that gets sends out through a subscription and sometimes the report has multiple pages and all those pages appear within one email.Is it possible to set the subscription in such a way that an email is sent per page when the subscription executes.
View 2 Replies View RelatedAny idea what this error is??
Thanks.
Attempt to fetch logical page (3:8360) in database 'XYZ' belongs to object '1934538212', not to object 'product'. [SQLSTATE HY000] (Error 605). The step failed.
I have created an Access2003 project (existing data) that links to external data. First I connected to a SQL Server 2000 database. Success. Then I tried to set up a Transact SQL data connection to a legacy MDW-secured Access97 database. (A third-party VB6 application goes against it, and we don't have the source code, so we cannot upgrade it.)
The Transact SQL link tests OK but I cannot select any of the tables or queries from the list presented. However, with the same credentials, I can use these same objects in Excel 2003.
When setting up the link in Access2003, I specify JET 4.0 OLE DB Provider, I enter the MDW file on the All tab, a username and a password on the Connection tab where I browse to the MDB file, and specify Shared Deny None on the Advanced tab. When I test the connection, it tests OK ("Test connection succeeded"). Yet on the "Select the Database and Table/Cube which contains the data you want" dialog, "(Default)" appears in the grayed-out dropdown. Then, beneath that dropdown, there is a grid with Name and Description columns. The grid contains query names but the grid is not enabled. The list of queries is this table is grayed out. Neither of the scrollbars works.
BUT... if I use the SAME username and password in Excel2003, and specify the same MDW, there is no problem working with these same database objects in the legacy Access97 database. WHAT IS DIFFERENT ABOUT THE WIZARD IN EXCEL THAT ALLOWS IT TO SUCCEED AND THE WIZARD IN ACCESS THAT CAUSES IT TO FAIL HERE? In Excel, the list of available providers says Microsoft Access Driver, not JET 4.0 OLE DB Provider.
Thanks
TR
When trying to link to an SQL table in Access 2003, the software appears to be malfunctioning.
The sequence of events is File - Get External Data - Link Tables - Files of Type: ODBC Databases().
The Problem: On two of my computers, the select data source window does not pop up, preventing me from linking to any ODBC data source.
Observations: This function has worked normally in the recent past and works on other computers running Access 2003. One difference between the computers working and non-working computers is Norton Antivirus 2006 (recent upgrade).
Has anyone experienced anything like this? What's going on?