Joining Two Tables - Calculate % Of Budgets Used For Each Waver Service By Month
Aug 9, 2013
I have written two programs; One which sum the total cost for services provided and one which pulls in the projected budgets for the services. The budgets can be renewed once a year or every six months. I’m having trouble joining to the programs together so I can calculate the % of budgets used for each waver service by month.
I have a query which provides the total number of each of 2 invoice flags per month, starting 1st Feb this year. I also need a percentage calculated for each of the 2 flags by month. However, it is showing the totals correctly for each of the flags by month, but the percentage is using the total of both flags for all months, and so it is wrong if I only want to look at one month. The query is as follows along with a sample output including % which are incorrect.
How can I correct this so that it shows the right % for each of the flags for each month?
Select sk.Period Period, sk.[Invoice Flag], count(*) * 100.0 / Sum(count(*)) Over () Percentage, count(*) Total1 From (Select wh.worknumber [Work Order],
[code].....
Output at present:
Period Invoice Flag Percentage Total1 --------------------------------- ------------------------------- --------------------------------------- ----------- 2015-02 Invoiced after 7 days 5.704697986577 136 2015-03 Invoiced after 7 days 2.097315436241 50 2015-02 Invoiced with Customer Approval 59.563758389261 1420 2015-03 Invoiced with Customer Approval 32.634228187919 778
I am new to SQL programming, i have only a fair knowledge on sql programmin.So, I apologies for any silly questions-
I have a Table1 which contains C1-acountid C2-date C3-grossamount(postivie and negative decimal values) C4-netamount
Table2 C1-groupid C2-accountid
Table 3 C1-groupid C2-groupname
I need create a store procedure to retrieve the following on a single table
1. top 10 losers of the day i.e. 10 AccountIDs with the greatest negative Grossamount for the day NOTE:These 10 AccountIDs may be sam or differing each day 2.sum of Netamount for each AccountIDs listed in STEP 1 since the beginning of the month. NOTE:These 10 AccountIDs may be same or differing each day and each day sum of netamount should be from beginning of the month till current date. 3.Sum of Netamount for the last 5 days for each accountids in STEP1
The result set must contain the columns as below
C1-accountid C2-date C3-net loss for 10 losers on the current date since the beginning of the month C4-Sum of Net for last 5 days C5-groupname
Please help me.
Below is the script that i have written, without calculating the sum
( select top 10 a.date, a.accountid, a.gross, a.net, c.groupname from GBSys_Sum_EOD a
join server2.dbname.dbo.table2 b on a.accontid=b.accounit=id join server2.dbname.dbo.Table3 c on b.groupid=c.groupid
where date> getdate()-1 and gross< (floor(-00.00)) order by gross )
I have a table which has name,Speciality,start date and end date. So each person may have 1/more rows .They will have more if they change their specialities. For example if you look at the data below.
AdjusterNameSpecialtyDatestartDateEnd Test Inside Property2009-08-29 2010-07-31 Test Management2010-08-012012-07-31
If we see at the data above Test has 2 rows because he changed his specialty in the middle.My requirement is to calculate the total number of employees in each month for last 2 years in each speciality. For example if we look at the example above, Test was in Inside property from 2009 Aug to 2010 Aug but if i use just the date start and take the month for each adjuster it gives me the number of adjusters started in that year and month but what i want is Test should be counted in all the months for Inside property until 2010 07 month. Which means i want to have the total number of adjusters present by each speciality for each month of last 2 years .
i want to calculate the month salary of an employee.which will be calculated on the basis of previous available leaves and present available leave(i.e) 2 per month.
What's the best way to calculate a customers age and value by month and year?
I need to be able to calculate customer value by month and year, and then to calculate their age at each month in time. I've found a way of grouping sales by month and year that includes age for a particular contact like this:
select fh.contact_number , concat(year(fh.transaction_date), '-', month(fh.transaction_date)) as transaction_month_year , cast(fh.transaction_date as date) as transaction_date , sum(fh.amount) as ttl_amount_in_month
[Code] .....
It seems to work, but any better way to achieve this?
I need to calculate “NET_SALES” and “MARGIN_PERCENT” for each month of the current year … the following returns the same values for each month in the list, which are for the current month. Taking out the GROUP BY line works fine for an overall number.
I'm trying to create a WHERE statement that will calculate values from our current fiscal year to the last complete month.I'm using code that was created for us that does the calculations for our entire fiscal years. I thought I had fixed the WHERE statement to work like we wanted last year, but it appears to be broken now after trying it again in January and February. I'm guessing my WHERE statement only works for March and up, but how to get it to work for every month. Most attempts I'm trying it's just returning very large and inaccurate values.
I included my WHERE statement below of what I originally had that worked last year. The @BeginYear/Month/etc are retrieved from a different table and @Month is just set to MONTH(GETDATE())-1.
WHERE (YEAR(SA3.DocumentDate)=@BeginYear AND MONTH(SA3.DocumentDate)>=@BeginMonth AND MONTH(SA3.DocumentDate)<=@Month) OR (YEAR(SA3.DocumentDate)=@EndYear AND MONTH(SA3.DocumentDate)<=@EndMonth AND MONTH(SA3.DocumentDate)>=@Month)
Hi, I have been handed an excel spreadhseet containing all budget & qty for all our Products - By Month by Distributor and told to write a report showing against current figures & last years figures (both pulled from sql tables)
I am having trouble pulling it all together - i have created a table based upon the excel spreadsheet - but i seem to be tieing myself in knots,
I cannot be the first to do this lol - and i feel i am proberly over-complcating things - anyone have any ideas i can use - I am not an expert report writer by the way, relatively new to reporting Services.
I have created 3 views, which I then want to join to produce an overall result. The first view returns customer details, along with payment information. The next two views return values only when the customer has purchased extras outside our standard product i.e. if there is no purchase of an extra, then nothing is written to the extra's table. When I join the views together they only return values where data has been matched in all 3 views i.e. extra's have been purchased. Any data that did not match in all 3 view (i.e. no extra's purchased) is either ignored or dropped from the results. So I need my script to return all values even if no data exists in the two extra views.
My scripts are as follows: Main View SELECT CUSTOMER_POLICY_DETAILS.POLICY_DETAILS_ID, CUSTOMER_POLICY_DETAILS.HISTORY_ID, CUSTOMER_POLICY_DETAILS.AUTHORISATIONUSER, CUSTOMER_POLICY_DETAILS.AUTHORISATIONDATE, ACCOUNTS_TRANSACTION.TRANSACTION_CODE_ID, CUSTOMER_INSURED_PARTY.SURNAME, SYSTEM_INSURER.INSURER_DEBUG, SYSTEM_SCHEME_NAME.SCHEMENAME, CUSTOMER_POLICY_DETAILS.POLICYNUMBER, --TotalPayable IsNull(SUM(CASE LIST_TRAN_BREAKDOWN_TYPE.IncludeInTotal WHEN 1 THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT ELSE 0 END), 0) AS TotalPayable, --NetPremium IsNull(SUM(CASE ACCOUNTS_TRAN_BREAKDOWN.Tran_Breakdown_Type_ID WHEN 'NET' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT ELSE 0 END), 0) AS NetPremium, --IPT IsNull(SUM(CASE WHEN SubString(ACCOUNTS_TRAN_BREAKDOWN.Premium_Section_ID, 1, 3) = 'TAX' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT ELSE 0 END), 0) AS IPT, --Fee IsNull(SUM(CASE ACCOUNTS_TRAN_BREAKDOWN.Tran_Breakdown_Type_ID WHEN 'FEE' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT ELSE 0 END), 0) AS Fee, --TotalCommission IsNull(SUM(CASE WHEN SubString(ACCOUNTS_TRAN_BREAKDOWN.Tran_Breakdown_Type_ID, 4, 4) = 'COMM' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT ELSE 0 END), 0) AS TotalCommission
FROM ACCOUNTS_CLIENT_TRAN_LINK INNER JOIN ACCOUNTS_TRANSACTION ON ACCOUNTS_CLIENT_TRAN_LINK.TRANSACTION_ID = ACCOUNTS_TRANSACTION.TRANSACTION_ID INNER JOIN ACCOUNTS_TRAN_BREAKDOWN ON ACCOUNTS_TRANSACTION.TRANSACTION_ID = ACCOUNTS_TRAN_BREAKDOWN.TRANSACTION_ID INNER JOIN LIST_TRAN_BREAKDOWN_TYPE ON ACCOUNTS_TRAN_BREAKDOWN.TRAN_BREAKDOWN_TYPE_ID = LIST_TRAN_BREAKDOWN_TYPE.TRAN_BREAKDOWN_TYPE_ID INNER JOIN CUSTOMER_POLICY_DETAILS ON CUSTOMER_POLICY_DETAILS.POLICY_DETAILS_ID = ACCOUNTS_CLIENT_TRAN_LINK.POLICY_DETAILS_ID AND CUSTOMER_POLICY_DETAILS.HISTORY_ID = ACCOUNTS_CLIENT_TRAN_LINK.POLICY_DETAILS_HISTORY_ID INNER JOIN SYSTEM_INSURER ON CUSTOMER_POLICY_DETAILS.INSURER_ID = SYSTEM_INSURER.INSURER_ID INNER JOIN SYSTEM_SCHEME_NAME ON CUSTOMER_POLICY_DETAILS.SCHEMETABLE_ID = SYSTEM_SCHEME_NAME.SCHEMETABLE_ID INNER JOIN CUSTOMER_INSURED_PARTY ON ACCOUNTS_CLIENT_TRAN_LINK.INSURED_PARTY_HISTORY_ID = CUSTOMER_INSURED_PARTY.HISTORY_ID AND ACCOUNTS_CLIENT_TRAN_LINK.INSURED_PARTY_ID = CUSTOMER_INSURED_PARTY.INSURED_PARTY_ID WHERE CUSTOMER_POLICY_DETAILS.AUTHORISATIONDATE = '2007-08-17' AND ACCOUNTS_TRANSACTION.TRANSACTION_CODE_ID <> 'PAY'
GROUP BY CUSTOMER_POLICY_DETAILS.POLICY_DETAILS_ID, CUSTOMER_POLICY_DETAILS.HISTORY_ID, CUSTOMER_POLICY_DETAILS.AUTHORISATIONUSER, CUSTOMER_POLICY_DETAILS.AUTHORISATIONDATE, ACCOUNTS_TRANSACTION.TRANSACTION_CODE_ID, CUSTOMER_INSURED_PARTY.SURNAME, SYSTEM_INSURER.INSURER_DEBUG, SYSTEM_SCHEME_NAME.SCHEMENAME, ACCOUNTS_TRANSACTION.Transaction_ID, CUSTOMER_POLICY_DETAILS.POLICYNUMBER
Add on View 1 CREATE VIEW TOPCARDPA AS select policy_details_id, History_id, Selected from customer_addon where product_addon_id = 'TRPCAE01'
Add on View 2 CREATE VIEW TOPCARDRESC AS select policy_details_id, History_id, Selected from customer_addon where product_addon_id = 'HICRESC01'
Join Result Script SELECT TOPCARD.AUTHORISATIONUSER, TOPCARD.AUTHORISATIONDATE, TOPCARD.TRANSACTION_CODE_ID, TOPCARD.SURNAME, TOPCARD.INSURER_DEBUG, TOPCARD.SCHEMENAME, TOPCARD.POLICYNUMBER, TOPCARD.TotalPayable, TOPCARD.NetPremium, TOPCARD.IPT, TOPCARD.Fee, TOPCARD.TotalCommission, TOPCARDPA.SELECTED, TOPCARDRESC.SELECTED FROM dbo.TOPCARD TOPCARD INNER JOIN dbo.TOPCARDPA TOPCARDPA ON TOPCARD.POLICY_DETAILS_ID = TOPCARDPA.POLICY_DETAILS_ID AND TOPCARD.HISTORY_ID = TOPCARDPA.HISTORY_ID INNER JOIN dbo.TOPCARDRESC TOPCARDRESC ON TOPCARD.POLICY_DETAILS_ID = TOPCARDRESC.POLICY_DETAILS_ID AND TOPCARD.HISTORY_ID = TOPCARDRESC.HISTORY_ID
I have included all the scripts I have used, as others may find them useful, in addition to anyone that is able to provide me with some assistance. Thanks in advance for for the help.
How do I do a max month minus 1? This is my code, but it's not coming up with the result I want. distint svcmo(service month) 200801 200712 200711 200710
select max(svcmo) from my table result: 200801 select max(svcmo) - 1 from my table result: 200800
Hi. I'm new to SQL, and need to join 2 tables... any hints??? table1:id (int)title(varchar(50))body(text) table2:id (int)title(varchar(50))body(text) somehow need to get the id, which table the record is from, and the title and body... so if the tables had the information: table1:id title body1 "first title" "first body"2 "second title" "second body"3 "third title" "third body" table2:id title body1 "first title" "first body"2 "second title" "second body"3 "third title" "third body" I would like to get... id table title body3 1 "third title" "third body"3 2 "third title" "third body"2 1 "second title" "second body"2 2 "second title" "second body"1 1 "first title" "first body"1 2 "first title" "first body" Does anyone know how to get this? I am fairly flexible if i need to change things... cheers, eh!
Hello everyone,I'm starting a new project right now and am trying to cut down on the number of stored procedures and tables I'm gonna have to use and I have run into a dead end.Up till now I have been doing the following: Say I had a PRODUCTS table with a DesignId column and ColorId column. I would then create a DESIGN table (Name, Id) and a COLOR table (Name, Id) to INNER JOIN with the two columns in my PRODUCTS table. And the same goes for all my other tables: ORDERS, CUSTOMERS, LINKS etc...... And in the end I would have a lot of tables and stored procedures for these category columns. So I thought, it would be nice to just have a Categories and Subcategories table for all my category columns for the whole website. That way every time I need to define a category column for any table I can simply just add the values to my Categories and Subcategories table instead of having to create a new table for every category column. Everything is fine and dandy except for trying to INNER JOIN these two tables with more than one column. To get values for one column is no problem:<code> SELECT *, _SubCategories.SubCategoryNameFROM _ProductsINNER JOIN _SubCategoriesON _Products.DesignId = _SubCategories.SubCategoryIdWHERE DesignId = COALESCE (@DesignId, DesignId)</code> But how do you INNER JOIN the ColorId column as well. Both DesignId and ColorId values are in my _SubCategories table. In a stored procedure: Is there any way to create a table and columns. Run a loop statement, with one INNER JOIN . Rerun another loop statement with a new INNER JOIN statement? Would that work or does any one else have an idea what would?Thank you guys for the help. It is much appreciated. Alec
Hello all, I have two datatables "customersReached " and "customersGuessed " and I want to combine them into one table only, the problem is that one table exeeded to the other by two fields, so what can I do??????? Mahmoudona
I've been trying to think about how I can do this. I have forums that I have written built around SQL Server. Basicly you have:
-A users Table -A Posts Table -A Replies Table.
Posts and replies have very similar structures. I'd like to be able to merge them and pick out the earliest post for said forum.
1 - is there a way to merge them so that the post date for both the replies and posts tables is contained in 1 column. If not is there a better alternative.
I'd also like to add indexing to the posts so I can do paging. Is there a way for me to add an index number to them while I can sort them anyway i want.
I am using MS SQL Server 2005 on Windows XP with SQL Server Management Studio Express CTP. I am having issues with my query on joining 2 tables I created using BETWEEN to restrict the Salary. Table 1 is called Employee and Table 2 is called Job_title. The column Job_title_code is the only column that is in both tables which is how I am joining both tables. Here is my SQL query:
Code:
SELECT Employee.*, Job_title.*
From Employee
INNER JOIN Job_title
ON Employee.Job_title_code=Job_title.Job_title_code
WHERE Salary
BETWEEN 50000 AND 500000;
The results I am getting back are:
Msg 207, Level 16, State 1, Line 7 Invalid column name 'Job_title_code'.
I can't figure out how to fix this error. I feel like I have tried everything, so any help will be much appreciated. Thank you.
Hi, I have a table with fields as partnerid, contractno. The partnerid field has the Id number which can be a supplier or a customer. I need to get the partner id(supplier) and the partner id (customers) of that particular supplier only. I tried with self join but the data is data is replicating.
Data in table PId ContractNo 20045 1567 435 1567 123 1567 345 1678 1004 1678
I need to display the data in the following format.
jack 20 Melbourne AAA Nick 30 Bendigo BBB Russ 28 Sydney AAA Marty 31 Perth AAA
Table 3
name age city Position
jack 20 Melbourne Manager Nick 30 Bendigo Manager Russ 28 Sydney Clerk Marty 31 Perth Manager
Table 4
name age city datejoined
jack 20 Melbourne 09-09-2001 Nick 30 Bendigo 08-05-2001 Russ 28 Sydney 10-12-2000 Marty 31 Perth 11-11-1999
I want a query which extract the name, age and city from Table 2 (where name,age and city equals table1 values) and position from table3 where position is 'manager' else return null and date joined from table 4 only for the managers else return null.
so the result should be
name age city position datejoined
jack 20 Melbourne Manager 09-09-2001 Nick 30 Bendigo Manager 08-05-2001 Russ 28 Sydney null null
my query
SELECT b. name, b.age, b.city,b.company,c.position,d.datejoined FROM Table1 a, Table2 b, Table3 c, Table4 d WHERE a.age=b.age and a.name=b.name and a.city=b.city and b.age*=c.age and b.name*=c.name and b.city*=c.city and b.position='Manager' and b.age*=d.age and b.name*=d.name and b.city*=d.city
THE RESULT IS
jack 20 Melbourne Manager 09-09-2001 Nick 30 Bendigo Manager 08-05-2001 Russ 28 Sydney null 10-12-2000
When I try to join table4 with table i am getting a exception
Ps: as the original code was in SQL SERVER 6.5 I have to use *= for joins not keywords LEFT JOIN or RIGHT JOIN
I have a bit of an issue that I can not seem to figure out and was hoping to get some feedback/advice from you all.
First a little background. I have two databases and I am adding a new table too one of them. However I need to join the two databases but by columns and the columns I want to use to join them will use different data types and values.
Example database 1 column 1 will be groups.group.id and database 2 column 1 will be users.group.id. However in database 2 (users) the group_id will contain different data.
Database 1 group.id will contain a single integer and database 2 group.id I want to have it contain multiple integers seperated by a comma.
Example code: select groups.group.id, groups.group.name from groups, users where groups.disabled='1' and users.user_id = $user_id and groups.group.id ? users.group.id
The "?" is where I am having trouble. Does anyone know of a way to join two databases by columns using different data types?
Hi, i have some sql experience and can link tables but the link i am trying to get is not displaying how i need it to
here is the code i am using, which display logical results, but not the ones i need :P
qry = "SELECT * FROM wce_contact INNER JOIN wce_mailer_link ON wce_contact.UNIQUEID = wce_mailer_link.Contactid LEFT JOIN wce_mailer ON wce_mailer.uniqueid = wce_mailer_link.mailerid RIGHT JOIN wce_mailer_attachments ON wce_mailer_attachments.uniqueid = wce_mailer.fileid WHERE wce_contact.uniqueid = '"& Request.QueryString("id") &"'"
Ok i have these tables
wce_contact This has the contacts name and address
wce_mailer This holds the details of the mailer and a link to the wce_mailer_attachments, there would be multiple rows in wce_mailer_attachments table which link to 1 row in wce_mailer.
wce_mailer_link This holds the wce_contact uniqueid, and the wce_mailer uniqueid. there will be many contacts to many mailers
wce_mailer_attachments This holds an individual row for one attachment, but the uniqueid would be the same for multiple rows, Dependant on how many attachments the users adds. i.e. one mailer could have several attachments, they would all have the same uniqueid.
Basically the results i am getting using the join i built are displaying each attachment as a separate row when i display the mailers assigned to a contacts record. i need them to display in one single row where the uniqueids are the same in the wce_mailer_attachments and they match the only fileid in wce_mailer.
Hi all! I have a problem joining three tables. My tables are: rooms: room_id ¦ room_name computers: computer_id ¦ computer_name ¦ room_id bookings: booking_id ¦ computer_id ¦ date
I want to join them so that i get a listing that displays all room names, and if there is a booking for any computer in that room I also want to display the computer name and the booking date next to the room name. If one room has bookings for several computers I would like to display that room several times.
I have gotten a correct result with:
SELECT rooms.room_name, t.computer_name, temp.date FROM rooms LEFT JOIN (SELECT computers.room_id, computers.computer_name, bookings.date FROM computers JOIN bookings ON (bookings.computer_id = computers.computer_id)) AS temp ON (rooms.room_id = temp.room_id)
but I would like to use something shorter like: SELECT rooms.room_name, computers.computer_name, bookings.date from computers INNER JOIN bookings ON (computers.computer_id = bookings.computer_id) RIGHT JOIN rooms ON (computers.room_ID = rooms.room_ID)
That however gives me a list where every combination of rooms and computers is listed and bookings displayed when there is a match. I don't really get why this doesn't work and I've been staring at it for days. Could somebody help me out? (I'm using PHP and MySQL)
Let say i have 3 tables (tblA, tblB, tblC). I want to get all data in tblA. At the same time, i want to join the tables. If value in column aStatus equal to 1, it will get the value from tblB. If the column value is 2, it will refer to tblC. Else, if it 0, no need to refer to any table. just like inner join.. but i dun get the logic of how im going to do that.. can someone advise me on how to do the joining? please refer to picture below.
Not sure if this as straight forward as it sounds!
Everytime I create new fields on our DB it creates new tables(our customer units have changed). What I need to do is pull the customer units from both tables into the same column. Is there a way to do this?
I am having trouble building a query that joins three tables. The tables are:
Table------------key fields Organizations---org_KEY (all fields start with org_) Locations-------LOC_KEY--LOC_ORG_KEY (all fields start with loc_) Users-----------USR_ORG_KEY----USR_LOC_KEY (all fields start with usr_)
Every location record is tied to a record in the organization table. (Via loc_key=org_key) Each user record belongs to one organization and one location. (usr_org_key=org_key and usr_loc_key=loc_key) Not all locations have a user. So if there is no user for any location ,I need the address info.
I need a result that is of all organizations, Locations and users Not all locations have a user but they all have address information eg (loc_address1, loc_city, etc....)
OK this is probably a really simple question, but I need to join three tables and I dont understand which types of "JOIN"s to use or how to lay it all out. Just as an example, this is what i want to do:
(table_name | field1, field2,)
kids_tbl | id, first_name, hair, eyes
hair_tbl | id, hair_color
eye_tbl | id, eye_color
So I want to replace the hair and eye color in the kids_tbl (which are numbers corresponding with the ids in the other tables) with the actual word from the correct table.
I have been reading up on this but it just isn't making sense to me.
Hi! I am trying to join two tables and use BETWEEN to restrict record selection. I have a table called, employee and a table called jobs. How do I write a query where I join the two and restrict the record selection by using the employee's salaries?
Given the following tables: table 1 1ClientNo 1BirthDate 1FirstName1MiddleName1LastName 100 08/12/1982TomMerry Hanks 101 08/13/1982May Hero Thompson 102 08/14/1982DrewBerry More 103 08/15/1985MinervaLee Potter table 2 2ClientNo2AccountNo 100 18010515 101 18010450 102 18010220 103 18010220
table 33AccountNo3Name 3Balance 18010515Tom Merry Hanks 100 18010450May Hero Thompson200 18010220Drew and Minierva200 18010220Drew and Minierva200 table 44AccountNo4DatePosted 1801051510/11/2005 18010450 What query can I build so that I can get this result?
Now I want to join these two tables (primary key TX_1) and get the sum of column T1_2 under the condition that T1_3 = a and T2_2 = 1 so that I get
Resulting table: T1_3 = a AND T2_2 = 1 ---------------- T1_1 SUM(T1_2) 10 250 20 50 40 560
but I am at a complete loss as how to accomplish this! Any help would be highly appreciated. I hope I have provided enough information to make my question comprehensible.
