MSDE Update SQL Stored Procedure Syntax
May 10, 2004
I have 2 tables, table A and B. Table A has the following fields; Phone (nvchar), Fname (nvchar), Lname (nvchar), DNC (bit). Table B has one field, PhoneNo (nvchar). I would like to update the field DNC in Table A to True(1) if the values Phone in Table A = PhoneNo in Table B.
I tried this syntax but it never updated:
UPDATE dbo.A
SET DNC = 1
WHERE (Phone = 'SELECT MAX dbo.B.PhoneNo FROM dbo.B')
These tables have over 100K records and I would like to make sure it runs through and checks every single record and not just the first 10000.
View 1 Replies
ADVERTISEMENT
Nov 24, 2005
This is probably a very simple question but i would appreciate some helpwith the correct syntax for and update stored procedureI have created user form that allows the user to update the name and address fields in a datatable called customers based on the input value customer ID = ( datatable/Customers)customerIDI have got this far and then got lost:Create SP_UpdateCustomer(@customerID, @name, @address)As Update customers ( name, address)Where customerID = @customerID GOCould anyone tell me what the correct sntax should be.many thanksMartin
View 3 Replies
View Related
Jul 20, 2005
Hi,I have a problem with updating a datetime column,When I try to change the Column from VB I get "Incorrect syntax near'942'" returned from [Microsoft][ODBC SQL Server Driver][SQL Server]'942' is the unique key column valueHowever if I update any other column the syntax is fineThe same blanket update query makes the changes no matter what isupdatedThe problem only happens when I set a unique key on the date field inquestionKey is a composite of an ID, and 2 date fieldsIf I allow duplicates in the index it all works perfectlyI am trying to trap 'Duplicate value in index' (which is working onother non-date columns in other tables)This is driving me nutsAny help would be appreciated
View 5 Replies
View Related
Jun 27, 2006
This is probably a very simple question but i would appreciate some help
I have the following stored procedure and I am getting the error message
"The objects "aspnet_Users" And "aspnet_Users" in the FROM clause have the same exposed names. Use correlation names to distinguish them"
Can anyone tell me where I am going wrong.
many thanks
Martin
ALTER PROCEDURE [dbo].[SP_CreateOrder](@CartID char (36),@UserId Varchar (50),@OrderTotal decimal (8))
AS
Declare @OrderID int
INSERT INTO Orders (UserID,Name,Address1,Address2,City,State,Country,Zip,OrderTotal)
SELECT aspnet_Users.UserId,aspnet_Users.Name,aspnet_Profile.Address1,aspnet_Profile.Address2,aspnet_Profile.City,aspnet_Profile.State,aspnet_Profile.Country,aspnet_Profile.Zip,@OrderTotal
FROM aspnet_Users,aspnet_Profile Join aspnet_Users On aspnet_Profile.UserId=aspnet_Users.UserId
WHERE asp_Users.UserId=@UserId
SET @OrderID = @@IDENTITY
INSERT INTO OrderDetails (UserId,OrderID,ProductID,Name,Cost,Quantity)
SELECT @UserID,@OrderID,Products.ProductID,Products.Name,Products.Cost,ShoppingCart.Quantity
From aspnet_User,Products Join ShoppingCart ON Products.ProductID =ShoppingCart.ProductIDWHERE aspnet_User.Userid=@UserId AND ShoppingCart.CartID = @CartID
EXEC SP_DeleteShoppingCart @CartIDSELECT @OrderIDGO
View 2 Replies
View Related
Dec 7, 2006
Does this Stored Procedure Syntax look okay?I'm trying to call it using classic asp with the following code but get an error on calling the stored procedure:set objComm = Server.CreateObject("ADODB.Command")
objComm.ActiveConnection = sstrDsnString 'You can also just specify a connection string here
objComm.CommandText = "editorTAmonthlyReport" ' stored procedure name
objComm.CommandType = adCmdStoredProc 'Requires the adovbs.inc file or typelib meta tag
'Add Input Parameters to date and from date variables - dtFrom and dtTo
objComm.Parameters.Append.CreateParameter("@dtFrom", adDate, adParamInput, 9)
objComm.Parameters.Append.CreateParameter("@dtTo", adDate, adParamInput, 9)
CREATE PROCEDURE editorTAmonthlyReport
@FromDate DateTime,
@ToDate DateTime
As
Select
U.UserID,
U.Title,
U.FirstName,
U.Surname,
TAU.UserPosition,
U.Email,
A.AgencyName,
A.AddressLine1,
A.AddressLine2,
A.Town,
A.County,
A.Postcode,
C.Country,
Coalesce(U.Phone,A.Phone) As Phone,
TAU.DateOfCreation
From
[user] U LEFT OUTER JOIN MyTrafalgarUser MTU
ON MTU.userID=U.UserID
INNER JOIN TravelAgencyUser TAU
ON U.UserID=TAU.UserID
INNER JOIN Agency A
ON TAU.AgencyID=A.AgencyID
INNER JOIN Country C
ON A.CountryID=C.CountryID
Where ( u.userid > 34657 AND DateDiff(d,TAU.DateOfCreation, @FromDate) < 0 )
and datediff(d,TAU.DateOfCreation, @ToDate) > 0
ORDER BY TAU.DateOfCreation
GO
View 2 Replies
View Related
Jun 8, 2007
Hi All
I will like to allow guess users to add items to the shopping cart (using a temp shoppingcartID):
' If user is not authenticated, either fetch (or issue) a new temporary cartID
If Not context.Request.Cookies("MMDotNetID") Is Nothing ThenReturn context.Request.Cookies("MMDotNetID").Value.ToString
Else
' Generate a new random GUID using System.Guid ClassDim tempCartId As Guid = Guid.NewGuid()
' Send tempCartId back to client as a cookie
context.Response.Cookies("MMDotNetID").Value = tempCartId.ToString()
context.Response.Cookies("MMDotNetID").Expires = DateTime.Now.AddMonths(1)
' Return tempCartId
Return tempCartId.ToString
' If user is authenticated I use the userID to store the items in the Shopping Cart
'If the user logon after adding some items to the cart I need to Migrate the old items.
'But my STORED PROCEDURE is not working properly:ALTER PROCEDURE MM_SP_ShoppingCartMigrate (
@OriginalCartId nvarchar(50),
@NewCartId nvarchar(50))
As
IF EXISTS(SELECT * FROM MM_SP_ShoppingCart
WHERE CartID = @NewCartId)
BEGIN
DECLARE @CountItemsInOldCard intSELECT @CountItemsInOldCard = MM_SP_ShoppingCart.Quantity
FROM MM_SP_ShoppingCartWHERE CartID = @OriginalCartId
DECLARE @CountItems intSELECT @CountItems = MM_SP_ShoppingCart.Quantity
FROM MM_SP_ShoppingCartWHERE CartID = @NewCartId
UPDATE MM_SP_ShoppingCart
SET Quantity = @CountItems + @CountItemsInOldCardWHERE CartID = @NewCartId
END
ELSE
UPDATE
MM_SP_ShoppingCart
SET
CartID = @NewCartId
WHERE
CartID = @OriginalCartId
DELETE FROM MM_SP_ShoppingCart
WHERE CartID = @OriginalCartId
RETURN
'Any help
View 2 Replies
View Related
Jul 20, 2005
I need help in writing a stored procedure on SQL Server 2000.Basically the stored procedure's primary task is to generate invoicerecords and insert the records in a invoice table. In order togenerate the invoice records, I have an initial table which arebasically Day Records. The task that I would like to complete is toselect all records from that initial table and I guess put them into atemp table. Now that i have my temp table, I would like to loop thruthe table record by record, and do inserts in the invoice table. Icant seem to figure out the syntax since I am somewhat weak in TSQLProgramming. I would appreciate any assistance on this forum or to myemail. Also If you need some pseudocode for the process or the DDL forthe initial table and the invoice table, I can definitely post that inthe forum possibly in the next thread. Please advise, I would need afull written syntax to get me started since i have some otherprocesses that I would need to build using the template. Thanks again.
View 7 Replies
View Related
Jul 20, 2005
I'm enhancing a large ASP application by replacing raw SQL statementsin the code with calls to stored procedures. I've seen thisrecommended in many places to increase SQL Server effieicency.Replacing select statements is going fine but I hit a sticking pointwhen trying to replace an update statement.Currently, I use this kind of statement a lot in my ASP:sql = "update"sql = sql & " field1 = value1"sql = sql & ",field2 = value2"If Len(value3) Then sql = sql & ",field3 = value3"sql = sql & " where ...., etc, etcThe important part here is checking if "value3" has a value beforeinserting it into my SQL statement. So how can I put this updatestatement into a stored procedure, pass in values for value1, value2,and value3, and leave off the value3 part of the update if value3comes in as null.Thanks all.
View 3 Replies
View Related
Jul 20, 2005
Hi AllIm trying to use the code at the bottom of this message inside my storedprocedure and when i execute the procedure in query analyzer i get thefollowing error:Server: Msg 207, Level 16, State 3, Line 1Invalid column name 'H'.This error happens a few times and im pretty sure it is because the selectstatement needs the ' around the data that is being searched. This is whatthe select statement looks like for me:SELECT * FROM Locations WHERE GroupID = H OR GroupID = HM OR GroupID = HMSOR GroupID = HMSS OR GroupID = HMSSR OR GroupID = HMSSRVAnd im pretty sure it is failing because sql wants the select statement tolook like this:SELECT * FROM Locations WHERE GroupID = 'H' OR GroupID = 'HM' OR GroupID ='HMS' OR GroupID = 'HMSS' OR GroupID = 'HMSSR' OR GroupID = 'HMSSRV'Am i thinking along the right lines with this ? If so does anybody know of away that i can put the ' mark around the the data that is being searched for? Any help is greatly appreciatedThanksCREATE PROCEDURE [dbo].[TestSP]@MachineName VarChar(50),@UserName VarChar(50)ASDECLARE @MachineLength Char(2) /* Local Machine Name Length */DECLARE @SrchInt Char(1) /* Search Loop Integer Counter */DECLARE @SqlStr VarChar(300) /* SQL Select String */DECLARE @CurrMach VarChar(50) /* Local Machine Name Counter */SET @SrchInt = 1SET @MachineLength = Len(@MachineName)SET @SqlStr = 'SELECT * FROM Locations WHERE GroupID = 'WHILE @SrchInt <= @MachineLengthBEGINSET @CurrMach = LEFT(@MachineName,@SrchInt)IF @SrchInt = 1BEGINSET @SqlStr = @SqlStr + LEFT(@MachineName,1)ENDIF @SrchInt > 1BEGINSET @SqlStr = @SqlStr + ' OR GroupID = ' + @CurrMachENDSET @SrchInt = @SrchInt + 1PRINT @SqlStrENDEXEC (@SqlStr)GO
View 4 Replies
View Related
Nov 2, 2003
my scriptcode goes like:
<%@ Page Language="VB" %>
<%@ import Namespace="System.Data" %>
<%@ import Namespace="System.Data.SqlClient" %>
<script runat="server">
Function populera() As Integer
Dim connectionString As String = "server='localhost'; trusted_connection=true; Database='modell2'"
Dim SqlConnection As SqlConnection = New SqlConnection(connectionString)
Dim queryString As String = "procForetag"
Dim sqlCommand As SqlCommand = New SqlCommand(queryString, sqlConnection)
SqlConnection.Open()
sqlCommand.CommandType = CommandType.StoredProcedure
sqlCommand.Parameters.Add(New SqlParameter("@Foretagsnamn", SqlDbType.varchar, 70))
sqlCommand.Parameters.Add("@Besoksadress", SqlDbType.varchar, 30)
sqlCommand.Parameters.Add("@Boxadress", SqlDbType.varchar, 20)
sqlCommand.Parameters.Add("@Postnummer", SqlDbType.char, 5)
sqlCommand.Parameters.Add("@Postadress", SqlDbType.varchar, 30)
sqlCommand.Parameters.Add("@Telefon", SqlDbType.varchar, 15)
sqlCommand.Parameters.Add("@Kontaktperson", SqlDbType.int, 70)
sqlCommand.Parameters("@Foretagsnamn").Value = txtFnamn.Text
sqlCommand.Parameters("@Besoksadress").Value = txtBadress.Text
sqlCommand.Parameters("@Boxadress").Value = txtBoxadress.Text
sqlCommand.Parameters("@Postnummer").Value = txtPnr.Text
sqlCommand.Parameters("@Postadress").Value = txtPadress.Text
sqlCommand.Parameters("@Telefon").Value = txtTelefon.Text
sqlCommand.Parameters("@Kontaktperson").Value = txtKontakt.Text
return nothing
sqlConnection.Close
End Function
Sub btnOK_Click(sender As Object, e As EventArgs)
dim i As Integer
i = populera()
End sub
</script>
and the stored procedure like this:
create procedure procForetag @Foretagsnamn varchar(70), @Besoksadress varchar(30),@Boxadress varchar(20), @Postnummer char(5),
@Postadress varchar(30),@Telefon varchar(15), @Kontaktperson int
as insert into Foretag
values(@Foretagsnamn, @Besoksadress,@Boxadress, @Postnummer,
@Postadress,@Telefon, @Kontaktperson)
However, when I run the page it doesn't update the database with the values that I provide. So the connection to the database that doesn't seem to work..Does anybody see why?
/asp.net-wannabe
View 5 Replies
View Related
Jan 7, 2004
Is there a way to add a field or a stored procedure to a server running MSDE? Like a script on the command line or?? how can this be done.
Thank you,
View 5 Replies
View Related
Apr 21, 2005
Hi,
I have a MSDE datatable which containes Documents and a link to thet document.
Is there any way i can search the doument name colunm using a search box from my web site and display the results. I have seen all these "stored procedure" discussions and just wonder whether it would be easy to search using the stored procedure?
I haven't got much experience using MSDE and it seems really a big task for me.
Any help/suggestions would be highly appreciated.
Thanks, RAJESH
View 4 Replies
View Related
Jul 27, 2006
This is probably a simple question but i would appreciate some help.
I have a stored procedure that i want want first to check if a customer
exists in the customer table and if a customer doesnt exist to insert values.
I know that there are other ways to do this but i was wondering if itwas possible to do this only within the stored procedure.
I have been using:
SELECT COUNT(*)FROM customersWHERE customerID=@customerID
IF COUNT(*)=0............
(Insert statement follows)
But the new customer values are not being inserted.Can anyone tell me where I am going wrong or suggest a diferent wat of doing this?
Many Thanks
martin
BY the way the rows seem to be counted as the information is inserted if i use If COUNT(*)>0 but the insert is not happening with the code above.
View 2 Replies
View Related
Jun 3, 2005
I'm having a weird issue with a stored procedure I wrote. I can
run it in Query Analyzer and no problem, but when I run it from the web
I get an error.
Heres the stored procedure:
CREATE PROCEDURE dbo.UpdateLosses
(
@Record int,
@PriorCarrier varchar(50),
@Year varchar(4),
@Losses money
)
AS
BEGIN TRAN
UPDATE Losses
SET PriorCarrier = @PriorCarrier,
[Year] = @Year,
Losses = @Losses
WHERE @Record = Record
COMMIT TRAN
GO
Here's the error:
Line 1: Incorrect syntax near 'UpdateLosses'.
Here's how I run it in Query Analyzer:
exec UpdateLosses @Record=20, @PriorCarrier='John', @Year='2002', @Losses=234.32
Any suggestions?
View 4 Replies
View Related
Dec 2, 2005
I would be very grateful if someone could help me with a stored procedure syntax problem
I want to insert the value "OrderTotal" into databasetable("Newtable") column "OrderTotal"(money (8)). The value can be returned from the page (Dim amount As Decimal = ShoppingCart.GetTotal() totalAmountLabel.Text = String.Format("{0:c}",amount) or returned by the function "ShoppingCart.GetTotal".
This is the syntax i have tried, but I get the error message "Invalid column name OrderTotal"
CREATE PROCEDURE SP_NewOrder(@CartID char (36),@CustomerID Varchar (50),@OrderTotal decimal(8))
AS
INSERT INTO NewTable (FirstName,ProductID,OrderTotal)
SELECT Customer.FirstName,Products.ProductID,Ordertotal
From Customer,Products Join ShoppingCart ON Products.ProductID =ShoppingCart.ProductIDWHERE Customer.CustomerID=@CustomerID AND ShoppingCart.CartID = @CartIDGO
Can anyone tell me where i am going wrong
many thanks
martin
View 1 Replies
View Related
May 9, 2006
Dear Forum,
I am adding a new column name to my Stored Procedure called HeadlinerID. It is an Int that is 4 characters long. I seem to be putting this in incorrectly in my stored procedure. I have tried it like: @HeadlinerID int(4), and @HeadlinerID int, and both ways I get the error below:
Error 170: Line 16: Incorrect Syntax near ‘)’. Line 40: Incorrect syntax near ‘@Opener’.
Is there a trick to putting in integers in a stored procedure?
Thanks,
Jeff Wood
Boise, ID
CREATE PROCEDURE Item_Insert( @Title varchar(50), @_Date datetime, @Venue varchar(50), @HeadlinerID int(4), @Opener varchar(150), @Doorstime varchar(50), @Showtime varchar(50), @Price varchar(50), @Onsaledate datetime, @Ticketvendor varchar(50), @TicketURL varchar(150), @Description varchar(1000),
)AS
INSERT INTO shows( Title, _Date, Venue, HeadlinerID, Opener, Doorstime, Showtime, Price, Onsaledate, Ticketvendor, TicketURL, Description)VALUES( @Title, @_Date, @Venue, @HeadlinerID, @Opener, @Doorstime, @Showtime, @Price, @Onsaledate, @Ticketvendor, @TicketURL, @Description )GO
View 3 Replies
View Related
Feb 5, 2004
I have the following stored procedure. The good thing is I finally got the syntax to the point where it doesn't blow up, but I was under the impression the "print" statement would print my result. In this case all I get is the statement ' 1 Row Affected ' which by the way is not the answer I was expecting.
Here's the code:
'
CREATE PROCEDURE createevents
AS
declare @myvariable varchar(700)
declare @myvar varchar(700)
begin
Select @myvariable = d.id
from table1 d, table2 dc where d.class = dc.class
If @myvariable > 0
begin
Select @myvar =dp. class
from table3 dp, table2 dc
where dp.class = dc.class
If @myvariable >= 1
begin
print @myvariable + (',') + @myvar
end
end
else
begin
print @myvariable + ('is empty')
end
end
'
Thanks in advance for any help.
View 5 Replies
View Related
Jun 23, 2008
MS SQL SERVER 2005
My problem is the next :
I have a Stored Procedure that execute several tasks
If I write the SP en the following format :
quote:
USE [REPORTES]
GO
/****** Object: StoredProcedure [dbo].[Astral_sp_AcCpasArtC] Script Date: 06/23/2008 11:29:16 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTERPROCEDURE [dbo].[Astral_sp_AcCpasArtC]
AS
BEGIN
SELECT ...
UPDATE ...
INSERT ...
END
It saves ok in Stored Procedures folder but doesn't run ok only send the message = Command(s) completed successfully.
Otherwise
If I write the SP in the following format :
quote:
USE [REPORTES]
GO
/****** Object: StoredProcedure [dbo].[Astral_sp_AcCpasArtC] Script Date: 06/23/2008 11:29:16 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTERPROCEDURE [dbo].[Astral_sp_AcCpasArtC]
AS
GO
SELECT ...
GO
UPDATE ...
GO
INSERT ...
GO
It run ok select/update/insert records but doesn't saves in Stored Procedures folder
It only save the next part :
quote:
USE [REPORTES]
GO
/****** Object: StoredProcedure [dbo].[Astral_sp_AcCpasArtC] Script Date: 06/23/2008 11:29:16 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTERPROCEDURE [dbo].[Astral_sp_AcCpasArtC]
AS
Also, when the SP has only one task (let's say a Select), it works ok with AS BEGIN - END format
Wich could be the problem?
Thanks
JG
View 7 Replies
View Related
Jul 20, 2005
I'm trying to use a couple of variables in a stored procedure. Things workfine when I hard code the data into the variables and also work fine when Iuse the variable in the WHERE clause and hard code data for the othervariable. So, I think I have a syntax problem when trying to use"FrontPage.@FrontpageProduct" as seen in my example code below. I've triedmany variations... and either get syntax errors or end up with a result of"no records." If somebody could assist me with the proper syntax for a"table_name.@variable_name" reference it would be greatly appreciated.The following procedure is called from a VB/.asp page. It's for astorefront front page where product codes listed in the table "FrontPage"are used to pull product data from table "Products."=============================CREATE PROCEDURE dbo.frontpage@FrontpageProduct varchar,@FrontpageDay varcharASSELECT * FROM Products LEFT JOIN FrontPage ON Products.Code =FrontPage.@FrontpageProduct WHERE FrontPage.theDay = @FrontPageDayGO=============================Again, thank you in advance for any help.Dave
View 4 Replies
View Related
Jan 3, 2008
How do I pass my stored procedure value into my query? My first example works, in the second example my parameters are contained in the sql string. How do I expose parameter values to the inner sql string?
Thanks for any help.
Kevin
==============================================
This works:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[SelectTest]
@StartDate datetime,
@EndDate datetime
AS
BEGIN
SET NOCOUNT ON;
SELECT
DownloadDate, [Project Number], [Project Name], [Expenditure Category],
[Expenditure Type], [Commitments], RevExp
FROM
dbo.OracleDownload
WHERE
DownloadDate BETWEEN @StartDate AND @EndDate
END
This does not:
INSERT INTO ReportTable (ItemDate, ProjectNo, ProjectName, Category, Type, Amount, RevExp)
EXECUTE
('SELECT DownloadDate, [Project Number], [Project Name], [Expenditure Category], [Expenditure Type], [Commitments], RevExp
FROM
dbo.OracleDownload
WHERE
[Project Number] > 0 AND DownloadDate BETWEEN @StartDate AND @EndDate ');
View 3 Replies
View Related
Jul 7, 2006
I get a syntax error from the following:
CREATE PROCEDURE dbo.IsFirmNickNameUnique
@NickName varchar(12),
@Found bit output
AS
IF ((SELECT COUNT(*)
FROM Firm
WHERE
Firm.NickName = @NickName) = 0)
BEGIN
@Found = 0
END
ELSE
BEGIN
@Found = 1
END
RETURN
View 1 Replies
View Related
Apr 22, 2008
Hi, i'm writing this stored procedure -
Code Snippet
USE [TheHub]
GO
create proc dbo.sp_GetInvitationsHistoryDetails(@ExecID int, @OrgID int)
as
IF (@OrgID = 0)
BEGIN
select E.EventID,E.Description as Event,E.EventDate as Date
I.Attending as [Att'g],NotAttending as [Not att'g],I.Bootcamp as [Maybe] I.Attended
FROM Invitations I INNER JOIN Events E on I.EventID=E.EventID
WHERE I.MemberID=@ExecID and NotForStats=0
ORDER BY E.EventDate DESC
END
ELSE
BEGIN
select E.EventID,E.Description as Event,E.EventDate as Date
count(*) as Invited,SUM(CONVERT(smallint,I.Attended)) AS Attended
FROM Invitations I INNER JOIN Events E on I.EventID=E.EventID
WHERE I.MemberID IN (select ID FROM Executives WHERE OrganisationID=OrgID
GROUP BY E.EventID,E.Description,E.EventDate
ORDER BY E.EventDate DESC
END
and i'm getting the following syntax errors when i check it -
Msg 102, Level 15, State 1, Procedure sp_GetInvitationsHistoryDetails, Line 10
Incorrect syntax near 'I'.
Msg 102, Level 15, State 1, Procedure sp_GetInvitationsHistoryDetails, Line 19
Incorrect syntax near 'count'.
Msg 156, Level 15, State 1, Procedure sp_GetInvitationsHistoryDetails, Line 23
Incorrect syntax near the keyword 'ORDER'.
Originally i just ran this sql from C# and it worked, obviously added the @ to the variables but it's basically the same.
Any ideas??
View 6 Replies
View Related
May 27, 2008
hi need help how to send an email from database mail on row update
from stored PROCEDURE multi update
but i need to send a personal email evry employee get an email on row update
like send one after one email
i use FUNCTION i get on this forum to use split from multi update
how to loop for evry update send an single eamil to evry employee ID send one email
i update like this
Code Snippet
:
DECLARE @id nvarchar(1000)
set @id= '16703, 16704, 16757, 16924, 17041, 17077, 17084, 17103, 17129, 17134, 17186, 17190, 17203, 17205, 17289, 17294, 17295, 17296, 17309, 17316, 17317, 17322, 17325, 17337, 17338, 17339, 17348, 17349, 17350, 17357, 17360, 17361, 17362, 17366, 17367, 17370, 17372, 17373, 17374, 17377, 17380, 17382, 17383, 17385, 17386, 17391, 17392, 17393, 17394, 17395, 17396, 17397, 17398, 17400, 17401, 17402, 17407, 17408, 17409, 17410, 17411, 17412, 17413, 17414, 17415, 17417, 17418, 17419, 17420, 17422, 17423, 17424, 17425, 17426, 17427, 17428, 17430, 17431, 17432, 17442, 17443, 17444, 17447, 17448, 17449, 17450, 17451'
UPDATE s SET fld5 = 2
FROM Snha s
JOIN dbo.udf_SplitList(@id, ',') split
ON split.value = s.na
WHERE fld5 = 3
now
how to send an EMAIL for evry ROW update but "personal email" to the employee
Code Snippet
DECLARE @xml NVARCHAR(MAX)DECLARE @body NVARCHAR(MAX)
SET @xml =CAST(( SELECT
FirstName AS 'td','',
LastName AS 'td','' ,
SET @body = @body + @xml +'</table></body></html>'
EXEC msdb.dbo.sp_send_dbmail
@recipients =''
@copy_recipients='www@iec.com',
@body = @body,
@body_format ='HTML',
@subject ='test',
@profile_name ='bob'
END
ELSE
print 'no email today'
TNX
View 2 Replies
View Related
Jun 21, 2008
Hi,
Im new to this forum and new also to SQL SERVER Edition Express.
Im trying to creat stored procedure. My main problem is that I need to display an alias consisting of 2 fields in a combobox (VB.Net) using also an innerjoin. Can anyone help me find my mistake please
My code is here and the error is :
-----------------------------------------------------------
Msg 156, Level 15, State 1, Procedure LA_suppName, Line 16
Incorrect syntax near the keyword 'INNER'.
-----------------------------------------------------------
@supplierFID int,
@supplierID int,
@LANo nvarchar(15) OUTPUT,
@suppName nvarchar(MAX) OUTPUT
AS
BEGIN
SET NOCOUNT ON;
-- Insert statements for procedure here
SELECT tb_LA.LANo, tb_supplier.suppName AS OrderSupplier
INNER JOIN tb_supplier ON tb_LA.supplierFID=tb_supplier.supplierID
Order by tb_LA.LANo
END
------------------------------------------------------
Eventually I would need to use tb_LA.LANo and make a query to populate the tb_LABooks in another combobox on selectvaluechanged. Is this possible please???
Many thanks
View 5 Replies
View Related
Aug 9, 2006
Can anyone tell me why the line highlighted in blue produces the following error when I try to run this stored proc? I know the parameters are set properly as I can see them when debugging the SP.
I'm using this type of approach as my application is using the objectdatasource with paging. I have a similar SP that doesn't have the CategoryId and PersonTypeId parameters and that works fine so it is the addition of these new params that has messed up the building of the WHERE clause
The Error is: "Syntax error converting the varchar value ' WHERE CategoryId = ' to a column of data type int."
Thanks
Neil
CREATE PROCEDURE dbo.GetPersonsByCategoryAndTypeByName (@CategoryId int, @PersonTypeId int, @FirstName varchar(50)=NULL, @FamilyName varchar(50)=NULL, @StartRow int, @PageSize int)
AS
Declare @WhereClause varchar(2000)Declare @OrderByClause varchar(255)Declare @SelectClause varchar(2000)
CREATE TABLE #tblPersons ( ID int IDENTITY PRIMARY KEY , PersonId int , TitleId int NULL , FirstName varchar (50) NULL , FamilyName varchar (50) NOT NULL , FullName varchar (120) NOT NULL , AltFamilyName varchar (50) NULL , Sex varchar (6) NULL , DateOfBirth datetime NULL , Age int NULL , DateOfDeath datetime NULL , CauseOfDeathId int NULL , Height int NULL , Weight int NULL , ABO varchar (3) NULL , RhD varchar (8) NULL , Comments varchar (2000) NULL , LocalIdNo varchar (20) NULL , NHSNo varchar (10) NULL , CHINo varchar (10) NULL , HospitalId int NULL , HospitalNo varchar (20) NULL , AltHospitalId int NULL , AltHospitalNo varchar (20) NULL , EthnicGroupId int NULL , CitizenshipId int NULL , NHSEntitlement bit NULL , HomePhoneNo varchar (12) NULL , WorkPhoneNo varchar (12) NULL , MobilePhoneNo varchar (12) NULL , CreatedBy varchar(40) NULL , DateCreated smalldatetime NULL , UpdatedBy varchar(40) NULL , DateLastUpdated smalldatetime NULL, UpdateId int )
SELECT @OrderByClause = ' ORDER BY FamilyName, FirstName'
SELECT @WhereClause = ' WHERE CategoryId = ' + @CategoryId + ' AND PersonTypeId = ' + @PersonTypeIdIf NOT @Firstname IS NULLBEGIN SELECT @WhereClause = @WhereClause + ' AND FirstName LIKE ISNULL(''%'+ @FirstName + '%'','''')'ENDIf NOT @FamilyName IS NULLBEGIN SELECT @WhereClause = @WhereClause + ' AND (FamilyName LIKE ISNULL(''%'+ @FamilyName + '%'','''') OR AltFamilyName LIKE ISNULL(''%'+ @FamilyName + '%'',''''))'END
Select @SelectClause = 'INSERT INTO #tblPersons( PersonId, TitleId, FirstName, FamilyName , FullName, AltFamilyName, Sex, DateOfBirth, Age, DateOfDeath, CauseOfDeathId, Height, Weight, ABO, RhD, Comments, LocalIdNo, NHSNo, CHINo, HospitalId, HospitalNo, AltHospitalId, AltHospitalNo, EthnicGroupId, CitizenshipId, NHSEntitlement, HomePhoneNo, WorkPhoneNo, MobilePhoneNo, CreatedBy, DateCreated, UpdatedBy, DateLastUpdated, UpdateId)
SELECT PersonId, TitleId, FirstName, FamilyName , FullName, AltFamilyName, Sex, DateOfBirth, Age, DateOfDeath, CauseOfDeathId, Height, Weight, ABO, RhD, Comments, LocalIdNo, NHSNo, CHINo, HospitalId, HospitalNo, AltHospitalId, AltHospitalNo, EthnicGroupId, CitizenshipId, NHSEntitlement, HomePhoneNo, WorkPhoneNo, MobilePhoneNo, CreatedBy, DateCreated, UpdatedBy, DateLastUpdated, UpdateId
FROM vw_GetPersonsByCategoryAndType '
EXEC (@SelectClause + @WhereClause +@OrderByClause)
View 1 Replies
View Related
Jul 30, 2007
Hello,
I'm writing a fairly involved stored procedure. In this Stored Procedure, I have an update statement, followed by a select statement. The results of the select statement should be effected by the previous update statement, but its not. When the stored procedure is finish, the update statement seemed to have worked though, so it is working.
I suspect I need something, like a GO statement, but that doesnt seem to work for a stored procedure. Can anyone offer some assistance?
View 6 Replies
View Related
May 26, 2000
hai guys,
i have written a stored procedure which creates a table ex:
USE PUBS
GO
IF EXISTS (SELECT * FROM SYSOBJECTS WHERE NAME = 'RC_STRPROC')
DROP PROCEDURE RC_STRPROC
GO
USE PUBS
GO
CREATE PROCEDURE RC_STRPROC
(@TBLNAME VARCHAR(35), @COLVAL1 VARCHAR(35), @COLVAL2 VARCHAR(35))
AS
IF EXISTS (SELECT * FROM SYSOBJECTS WHERE NAME = '@TBLNAME')
DROP TABLE @TBLNAME
CREATE TABLE @TBLNAME
(@COLVAL1, @COLVAL2)
GO
it gives an syntax error at '@tblname'
can u guys tell me the problem
thanks
hiss
View 2 Replies
View Related
Feb 17, 2008
Hi all,
I copied the the following code from a book to the query editor of my SQL Server Management Studio Express (SSMSE):
///--MuCh14spInvTotal3.sql--///
USE AP --AP Database is installed in the SSMSE--
GO
CREATE PROC spInvTotal3
@InvTotal money OUTPUT,
@DateVar smalldatetime = NULL,
@VendorVar varchar(40) = '%'
AS
IF @DateVar IS NULL
SELECT @DateVar = MIN(InvoiceDate)
SELECT @InvTotal = SUM(InvoiceTotal)
FROM Invoices JOIN Vendors
WHERE (InvoiceDate >= @DateVar) AND
(VendorName LIKE @VendorVar)
GO
///////////////////////////////////////////////////////////////
Then I executed it and I got the following error:
Msg 156, Level 15, State 1, Procedure spInvTotal3, Line 12
Incorrect syntax near the keyword 'WHERE'.
I do not know what wrong with it and how to correct this problem.
Please help and advise.
Thanks,
Scott Chang
View 18 Replies
View Related
Dec 26, 2007
I have a stored procedure that contains a paramteter of type nvarchar(max). What is the syntax to pass this parameter to the sp from a VB.Net application. Specifically, I need to know what to put in the 3rd parameter below:
cmd.Parameters.Add("@Name", SqlDbType.NVarChar, , Name)
View 1 Replies
View Related
May 14, 2008
The following query works fine in query analyzer, but when I add it to my stored procedure I receive an error 156. How do I work around this?
select distinct(dateposted)
from billingprocedures bp1,
billingprocedureordercomponentvalues bpocv,
ordercomponentvalues ocv
where bp1.billingid = @billingid
and bp1.procedureid = bpocv.billingprocedureid
and bpocv.ordercomponentvalueid = ocv.ordercomponentvalueid
Thanks,
Bryan
View 12 Replies
View Related
Jun 16, 2006
Can someone walk me through the code for my update_command event?Every article I read and every tutorial I walk through has a slightly different way of doing this task.It's confusing trying to understand which code-behind variables I need in my update_command event and how to pass them to a stored procedure.
Please help me connect the dots.
I have a SQL server table that looks like this (Both data types are char)
Status_Id Status_DescriptionA ActiveP Planned
I have a SQL stored procedure that looks like this…
create procedure dbo.usp_Update_Status_Master(@status_id char(1),@status_description char(30))asupdate status_masterset status_description = @status_descriptionwhere status_id = @status_idGO
Here is my code behind…
Imports SystemImports System.DataImports System.Data.SqlClientImports System.ConfigurationImports System.Data.OdbcPublic Class WebForm1 Inherits System.Web.UI.Page Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load If Not IsPostBack Then Call LoadStatusMasterGrid() End If End Sub Public Sub LoadStatusMasterGrid() Dim connection As SqlConnection = New SqlConnection(ConfigurationSettings.AppSettings("sqlConn")) connection.Open() Try Dim command As SqlCommand = _ New SqlCommand("usp_Select_Status_Master", connection) Command.CommandType = CommandType.StoredProcedure Dim adapter As SqlDataAdapter = New SqlDataAdapter(Command) Dim table As DataTable = New DataTable adapter.Fill(table) dgStatusMaster.DataSource = table dgStatusMaster.DataKeyField = "status_id" dgStatusMaster.DataBind() Catch ex As Exception Console.WriteLine(ex.Message) Throw Finally connection.Close() End Try End Sub Private Sub dgStatusMaster_EditCommand(ByVal source As Object, _ ByVal e As System.Web.UI.WebControls.DataGridCommandEventArgs) Handles dgStatusMaster.EditCommand dgStatusMaster.EditItemIndex = e.Item.ItemIndex dgStatusMaster.DataBind() Call LoadStatusMasterGrid() End Sub Private Sub dgStatusMaster_CancelCommand(ByVal source As Object, _ ByVal e As System.Web.UI.WebControls.DataGridCommandEventArgs) Handles dgStatusMaster.CancelCommand dgStatusMaster.EditItemIndex = -1 Call LoadStatusMasterGrid() End Sub Private Sub dgStatusMaster_UpdateCommand(ByVal source As Object, _ ByVal e As System.Web.UI.WebControls.DataGridCommandEventArgs) Handles dgStatusMaster.UpdateCommand ‘ How do I code this part? End SubEnd Class
Thanks in advance for taking the time.Tim
View 1 Replies
View Related
Feb 18, 2008
hi
i have 2 columns linked ( 1 to a textbox and the other to drop down list)
when i try to update i get 1 of the to the update SP but not the other and get this error
Procedure or Function 'Update_ActiveCity' expects parameter '@Cities', which was not supplied.
_________________ this is the code of the aspx ____________
<asp:GridView ID="grdD" runat="server" AutoGenerateColumns="False" DataKeyNames="CountryCode" DataSourceID="dsGrdD" OnRowDataBound="grdD_RowDataBound"><Columns><asp:TemplateField><ItemTemplate>
<asp:TextBox ID="txtCountry" runat="server" Text='<%# Bind("Country") %>' />
<asp:DropDownList ID="ddlCities" runat="server" />
</ItemTemplate></asp:TemplateField></Columns></asp:GridView>
<asp:SqlDataSource ID="dsGrdD" runat="server" ConnectionString="<%$ ConnectionStrings:DBConnectionString %>"
SelectCommand="Select_Cities" SelectCommandType="StoredProcedure" UpdateCommand="'Update_ActiveCity' " UpdateCommandType="StoredProcedure" CacheExpirationPolicy="Sliding">
<SelectParameters> <asp:SessionParameter Name="ListCode" SessionField="ListCode" Type="String" /> </SelectParameters>
</asp:SqlDataSource>
_______________________ this is the code behind ____________________protected void grdD_RowDataBound(object sender, GridViewRowEventArgs e)
{DropDownList ddl = e.Row.FindControl("ddlCities") as DropDownList;if (ddl != null)
{
string s = DataBinder.Eval(((GridViewRow)e.Row).DataItem, "Cities").ToString();ddl.DataSource = s.Split(',');
ddl.DataBind();
}
}
_______________________________________________________________________________-
View 9 Replies
View Related
May 3, 2008
here is the procedureALTER PROCEDURE dbo.UpdateContact
(@ContactId bigint,@FirstName nvarchar(50),
@LastName nvarchar(50),@Telephone nvarchar(50),
@Addressline nvarchar(150),@State nvarchar(100),
@City nvarchar(100),@PostalCode varchar(50),
@Email nvarchar(50),
@MobilePhone varchar(50))
AS
SET NOCOUNT ON
UPDATE ContactSET FirstName = @FirstName,
LastName = @LastName,
Telephone = @Telephone,
MobilePhone = @MobilePhone,
Email = @Email,
Addressline = @Addressline,
City = @City,
State = @State,
PostalCode = @PostalCodeWHERE ContactId = @ContactId
RETURN
what is the problem if i execute the storedprocedure separately it is working but when i call the storedprocedure in the code it fails.
It gives an error as "syntax error near Updatecontact"
Any ideas???
View 1 Replies
View Related
