Memory Issues, SSIS Package Out Of Memory Help
Dec 6, 2006
I am running Visual Studio 2005. I have an SSIS Package which is consuming a huge amount of memory. During the execution of the package the memory keeps increasing. Until finally i get an Out of Memory exception. I have run this package using dtexec, and in the BIDS. No difference. I do have some script components and have added some code to get the assemblies in the current appdomain. I do see that one particular assembly is increasing on every loop. VBAssembly every time it hits the script component is increasing by 6, and along with it the memory is climbing. What is this VBAssembly being used for is there an update to SQL Server Integration Services that I need?
Thanks! Aaron B.
View 6 Replies
ADVERTISEMENT
Mar 27, 2008
Hello, I understand that we should use SSMS -> Server Properties -> Memory to put a cap on the SQL server memory usage, therefore it gives some space memory for OS, this is based on the fact if the max memory is not specified, SQL will use whatever available memory and eventually crash the system.
My question is that when a server has SSIS and SSAS services installed along with the SQL service. Would the max memory setting covers the SSIS and SSAS memory usage, or the SSIS and SSAS has to shared the memory with OS?
Thanks,
fshguo.
View 1 Replies
View Related
Aug 23, 2007
I have an SSIS Package that loads data from a log file. Prior to loading the data I need to prepare the file. I run a script that cleans the file. Then I import the flat file into SQL Server.
Log File Management Task
1. Run Unix Log File Task
2. Import the new log file (flat file) into SQL Server
Error
i.Unix.dtsx
Message: The script threw an exception: Exception of type 'System.OutOfMemoryException' was thrown.
Is this because the system is running out of memory? The RAM on the server is 4gb. Below is a sample of the script. The job doesn't always fail; there are times when the job executes with success and other times when it fails.
Script Source Code
-----------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports System.Collections.Generic
Imports System.IO
Imports System.Text
Imports System.Diagnostics
Imports System.Globalization
Imports Microsoft.VisualBasic
Imports System.Text.RegularExpressions
Public Class ScriptMain
'********** Begin Error Log Settings **********
'Dim sSource As String = "i.SSIS.Unix.FileManager"
'Dim sLog As String = "Application"
'Dim sMachine As String = "."
'Dim ELog As New EventLog(sLog, sMachine, sSource)
'********** End Error Log Settings **********
Public Sub Main()
'variables for the unix log file
Dim newFile As String = "D:iLogunixlog.txt"
Dim copyFile As String = "\server16iLogunixlog.txt"
'variables for working log files
Dim oldFile As String = "D:i empunixlog.txt"
Dim difFile As String = "D:i empunixdiff.txt"
Dim trimdiff As String = "D:i empunixdifft.txt"
Dim formatTemp As String = "D:i empunixlog_formatted.txt"
Dim errorFile As String = "D:i empunixlog_bad.txt"
'delete unixlog.txt copy unixlog.txt
'if the file is on the local server delete it and copy the new file over
'if the file is not present copy the new file over
Try
If File.Exists(newFile) Then
File.Delete(newFile)
File.Copy(copyFile, newFile)
Else
File.Copy(copyFile, newFile)
End If
While Not File.Exists(newFile)
System.Threading.Thread.Sleep(1000)
End While
'ELog.WriteEntry("FileCopy.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("FileCopy.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
'open the old file; read backwards until we reach the carriage
'return and store that "seek" position; now open the new file and
'seek to that stored position. finally, read the rest of the file
'and write that data to the difference file.
' determine position of last line in the old file
Dim lastLine As Long = GetLastLinePosition(oldFile)
' get all data in new file starting at position determined above
Dim fi As New FileInfo(newFile)
Dim buffer(fi.Length - lastLine) As Byte
Dim fs As New FileStream(newFile, FileMode.Open)
Try
fs.Seek(lastLine, SeekOrigin.Begin)
fs.Read(buffer, 0, buffer.Length)
fs.Close()
' write that new data to the difference file
fs = New FileStream(difFile, FileMode.OpenOrCreate, FileAccess.Write, FileShare.None)
fs.Write(buffer, 0, buffer.Length)
fs.Close()
'ELog.WriteEntry("FileCopy.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("FileCopy.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
'remove the partial row from the difference file
Try
TrimFinal(difFile, trimdiff)
'ELog.WriteEntry("TrimFinal.Call.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("TrimFinal.Call.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
'perform the file formatting
sFormatFile(trimdiff, formatTemp, errorFile)
'
Dts.TaskResult = Dts.Results.Success
End Sub
Function GetLastLinePosition(ByVal fileName As String) As Long
Dim pos As Long = -1
Dim fs As New FileStream(fileName, FileMode.Open, FileAccess.Read, FileShare.ReadWrite)
Try
fs.Seek(-2, SeekOrigin.End) ' -2 to skip a potential vbcrlf at the end of file
While fs.Position > 0
fs.Seek(-1, SeekOrigin.Current)
If fs.ReadByte = 10 Then
pos = fs.Position
Exit While
Else
fs.Seek(-1, SeekOrigin.Current)
End If
End While
fs.Close()
'ELog.WriteEntry("GetLastLinePosition.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("GetLastLinePosition.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
Return pos
End Function
Sub TrimFinal(ByVal difFile As String, ByVal trimdiff As String)
Dim fi2 As New FileStream(difFile, FileMode.OpenOrCreate, FileAccess.Read)
Dim fo2 As New FileStream(trimdiff, FileMode.OpenOrCreate, FileAccess.Write)
Dim sr2 As New StreamReader(fi2)
Dim sw2 As New StreamWriter(fo2)
Dim line2 As String
Try
Do While sr2.Peek <> -1
line2 = sr2.ReadLine()
If (sr2.Peek <> -1) Then
sw2.WriteLine(line2)
End If
Loop
sw2.Flush() : sw2.Close()
sr2.Close()
fi2.Close() : fo2.Close()
'ELog.WriteEntry("TrimFinal.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("TrimFinal.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
End Sub
Sub sFormatFile(ByVal currentFile As String, ByVal tempFile As String, ByVal errorFile As String)
Dim tfp As New Microsoft.VisualBasic.FileIO.TextFieldParser(currentFile)
Dim sw As New System.IO.StreamWriter(tempFile)
Dim swErrorFile As New System.IO.StreamWriter(errorFile)
tfp.TextFieldType = FileIO.FieldType.Delimited
tfp.SetDelimiters(",")
tfp.HasFieldsEnclosedInQuotes = True
tfp.TrimWhiteSpace = True
Dim fields() As String
Try
While Not tfp.EndOfData
Try
fields = tfp.ReadFields()
If fields.Length <> 23 Then
'write bad rows to error-file
swErrorFile.WriteLine(String.Join(",", fields))
Else
If fields(3) = "" And fields(13) = "" Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
ElseIf IsDate(fields(3)) = True OrElse fields(3) = Format(CDate(fields(3)), "yyyy-MM-dd HH:mms") And fields(13) = "" Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
ElseIf IsDate(fields(13)) = True OrElse fields(13) = Format(CDate(fields(13)), "yyyy-MM-dd HH:mms") And fields(3) = "" Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
ElseIf IsDate(fields(3)) = True OrElse fields(3) = Format(CDate(fields(3)), "yyyy-MM-dd HH:mms") _
And IsDate(fields(13)) = True OrElse fields(13) = Format(CDate(fields(13)), "yyyy-MM-dd HH:mms") Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
Else
swErrorFile.WriteLine(String.Join(",", fields))
End If
End If
Catch ex As Exception
'ELog.WriteEntry("sFormatFile.TFP.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 0, CType(4, Short))
End Try
End While
tfp.Close()
sw.Close()
swErrorFile.Close()
File.Delete(currentFile)
File.Move(tempFile, currentFile)
'ELog.WriteEntry("sFormatFile.Success".ToString(), EventLogEntryType.SuccessAudit, 0, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("sFormatFile.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 0, CType(4, Short))
Finally
GC.Collect()
End Try
End Sub
End Class
-------------------------
Does my script seem okay for releasing the server memory usage?
Thanks.
View 1 Replies
View Related
Feb 28, 2008
Dear Friends
I have SSIS package When I run it SQL Server memory Shoots Very Much
How To check and Solve this problem When I queried In the same package as sp it does not take that much memory
please help me how to control SQL Memory shoot.
View 3 Replies
View Related
Oct 18, 2007
I see following error when I execute a SSIS package as part of a job from within SQL Server
OnInformation,006-CIS-SQL,apdsvcPM2SQL,VistaMain,{F902B487-D543-4F31-AC80-EF088CD0CBA4},{74325B35-DC59-4B51-AE8E-756BCC879633},10/18/2007 6:15:12 AM,10/18/2007 6:15:12 AM,1074036748,0x,The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 4 buffers were considered and 4 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
SQL Server has 6 GB memory allocated to it. How can I best troubleshoot this issue?
View 6 Replies
View Related
Feb 20, 2007
Hi,
when i am trying to execute package in ssis then given below errors comes many times.how to fix it.any body can ......
in ssis default buffer size 10 mb.
soure is iseries-db2 on as400 in production server ,
and destination is db2 udb on windows in dev server.
usersapce page size in db2 is 16-32k
4 gb ram support in server with 2003 server standard edition.
errors are---
Information: 0x4004800D at CHDRPF 312-315, DTS.Pipeline: The buffer manager failed a memory allocation call for 15728400 bytes, but was unable to swap out any buffers to relieve memory pressure. 3 buffers were considered and 3 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at CHDRPF 312-315, DTS.Pipeline: A buffer failed while allocating 15728400 bytes.
Error: 0xC0047011 at CHDRPF 312-315, DTS.Pipeline: The system reports 83 percent memory load. There are 3488509952 bytes of physical memory with 558743552 bytes free. There are 2147352576 bytes of virtual memory with 222920704 bytes free. The paging file has 7416537088 bytes with 3703283712 bytes free.
Error: 0xC0047056 at CHDRPF 312-315, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "DataReader Source" (15437) on component "DataReader Output" (15442). This error usually occurs due to an out-of-memory condition.
Error: 0xC0047021 at CHDRPF 312-315, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0x8007000E.
Error: 0xC0047039 at CHDRPF 312-315, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CHDRPF 312-315, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
so what need to do for fix that problem ......
View 10 Replies
View Related
Jan 15, 2013
i have a nightly job (SSIS Package) scheduled using MS. The package loads data from the OLTP db to the warehouse. The server has 256GB memory and out of which 211GB is free.
the job runs w/o any problems but some times it fails with the following error"DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Violation of PRIMARY KEY constraint '<var>PrimaryKeyName</var>'. Cannot insert duplicate key in object '<var>TableName</var>'.".
When i researched this error i found out that its because of the memory issue. we have 222GB free memory and how come this is possible. Is there a way in the package or anywhere else where i can specify how much (percentage) of the memory that the SSIS package should use (something like SSRS threshold levelp).
View 13 Replies
View Related
Jul 12, 2006
Visual Studio runs out of memory when trying to use SSIS package. I am trying to create and run a SSIS package that validates and imports some large xml files >200MB. Validation fails because Visual studio cannot open large files without running out of memory.
The SSIS package throws this error when I run the package..at the validation task.
Error: 0xC002F304 at Validate bio_fixed, XML Task: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.".
How do I increase the amount of RAM that VIsual Studio can use...I have plenty of RAM on my workstation >3GB, but VS chokes maybe around 100MB files?
Thanks,
Forrest
View 9 Replies
View Related
May 12, 2006
When attempting to save an SSIS package in Visual Studion I receive the following error message detailed below. If I attempt to "Save As" to another location, I then receive an insufficient storage error. The development machine has over 1.5 GB of available physical memory and several GB of disk space availabe to save my 16 MB package. I have checked the event log and have found no related messages in the Application or Server logs.
Any suggestions on how to determine the cause or resolution of this error message would be greatly appreciated.
Failure saving package. (Microsoft Visual Studio)
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
Advanced Error Message Details
Failure saving package. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializeComponent(IDesignerSerializationManager manager, IComponent component, Object serializationStream)
at Microsoft.DataWarehouse.Serialization.DesignerComponentSerializer.Serialize(IDesignerSerializationManager manager, Object value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseDesignerLoader.Serialize()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush(Boolean forceful)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseContainerManager.OnBeforeSave(UInt32 docCookie)
===================================
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Package.SaveToXML(String& packageXml, IDTSEvents events)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
View 3 Replies
View Related
Jul 13, 2015
I am looking to test this feature - and the "Transaction Performance Collector" has recommended me a table to port to In-Memory OLTP.Β
I have now tried the "Table Memory Optimization Advisor" tool.
After a couple of tweaks to the table design - the tool is now passing validation but the tool is not allowing to progress to the next step:
Could it be down to not having enough memory? But would this not show in the advisor?
View 4 Replies
View Related
Sep 28, 2007
Hello. I have received the follwoing error upon an attempt to Browse the Cube. All other tabs are functional, including the Calculations tab. We are running Windows Server 2003 SP2 and SQL Server 2005 SP2. Any suggestions would be greatly appreciated!
**EDIT** - Have confirmed SP1 for VS2005 is installed both locally and on server, also.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.Office.Interop.Owc11.PivotView.get_FieldSets()
at Microsoft.AnalysisServices.Controls.PivotTableFontAdjustor.TransformFonts(Font font)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdatePivotTable(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdateAll(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.InitialUpdate()
at Microsoft.AnalysisServices.Browse.CubeBrowser.SupportFunctionWhichCanFail(FunctionWhichCanFail function)
View 4 Replies
View Related
Oct 11, 2007
I've been researching AWE to determine if we should enable this for our environment.
Currently we have a quad core box with 4 gb of RAM (VMware). OS: Windows 2003 std, SQL Server 2005 std. 3GB is not set but will be as soon as we can perform maintenance on the server.
I have read mixed feedback on AWE, either it works great or grinds you to a hault. I would assume that the grinding to a hault is due to not setting the min/max values correctly or not enabling the lock page in memory setting.
We only have one instance of SQL on the server and this box won't be used for anything else aside from hosting SQL services. We do plan on running SSRS off of this server as well.
1. Will running SSRS and enabling AWE cause me problems? Will I have to reduce the max setting by the SSRS memory usage or will it share and play nice?
2. How do I go about setting the Max value? Should it be less than the physical RAM in the box? Right now its set to the default of 214748364, even if I don't enable AWE should this default value be changed?
3. It seems that even at idle the SQL server holds a lot of memory and the page file grows. If I restart the process in the morning, memory usage in taskmon is at 600mb or so. By the end of the day, its up around 2gb. How can I track down whats causing this, should this even concern me?
4. The lock Page in memory setting worries me. Everything I've read on this seems to give a warning about serious OS and other program support degradation. In some cases to the point where they have to restore the settings on the server before they can bring it back up. What are your thoughts on this.
View 3 Replies
View Related
Aug 28, 2015
I have a Windows sever 2012 with sql server 2012 enterprise. Ram size is 22GB. Sometimes SQL sever takes 95% memory.My question, How to reduce memory size without killing any process because it's production server.So there are many background process is running.Β And,Is there any guides to learn why Memory is raise d so high and how to reduce it.
View 10 Replies
View Related
Aug 22, 2007
sql server 2000 is running on windows server 2003 ... 4gb of memory on server .... 2003 was allocated 2.3gb nd sql server was allocated (and using all of it) 1.6gb for total of approx 4gb based on idera monitor software ... all memory allocated betweeen the OS and sql server .... then 4 more gb of memory added for total now of 8g ... now idera monitor shows 1.7gb for OS and 1.0 gb for sql server ..... 'system' info shows 8gb memory with PAE ... so I assume that the full 8gb can now be addressed .... why are less resources being used now with more total memory .... especially sql server ..... i thought about specifying a minimum memmry for sql server but i amnot convinced that would even work since it seems that this 1gb limit is artificial .... it it used 1.6 gb before why would it not use at least that much now ??
thank you
View 4 Replies
View Related
Oct 4, 2015
i want to create a lot of index for my database for performance.but i need find memory usage by indexes.
How to find memory usage by index in sql server?
View 9 Replies
View Related
Jun 15, 2015
I've a database with a memory optimized filegroup on it. How can I remove it?I have removed the memory optimized table I had on it, but when I try to remove the filegroup I receive an error.
View 12 Replies
View Related
Jul 17, 2006
Hi,
I am going to install SQL Server 2000 (then SQL 2K5) on a Win Server 2K3 with 8 GB of ram, but it will be 16 GB in the near future.
I would like to reserve a fixed memory (for momemt less than 3-4 GB) for SQL Server and the rest for application (virtualization).
Without AWE enabled, max memory for SQL Server 2K5 is 4GB as for SQL Server 2000?
How can I manage and optimize memory keeping in mind AWE. (any doc, website available?)
Thank
View 5 Replies
View Related
Oct 5, 2006
Hi,
I know the SSIS memory problem has probably been covered quite a bit, but being a newbie in using the SSIS, I'm not quite sure how to improved the performance of my SSIS package.
Basically, I've a package that loops through all the subdirectories within a specified directory, and it then loops through each file in the subdirectory and with the use of the Data Flow, process each file (according to their filenames) with a Script Component to insert data into a SQL DB.
Each subdirectory has up to 15 different csv files, but each is less than 5kB. I probably have about 100 subdirectories.
When I run the package, it functioned properly, but the package stalled (no error but just stuck in one Data Flow) after a while, and when I checked my CPU memory, it was running at 100%.
I'm not sure how I could fix it or improved the memory allocation. I was not expecting to have any memory problems as the file size is small and the number of rows of data going into and out of the Script Component is no more than 20.
Any advice? Thanks.
View 1 Replies
View Related
Feb 10, 2015
So I started a new job recently and have noticed a few strange configurations. Typically I would never mess with min memory per query option and index create memory option configuration because i just haven't seen any need to. My typical thought is that if it isn't broke... They have been modified on every single server in my environment.
From Books Online:
β’ This option is an advanced option and should be changed only by an experienced database administrator or certified SQL Server technician.
β’ The index create memory option is self-configuring and usually works without requiring adjustment. However, if you experience difficulties creating indexes, consider increasing the value of this option from its run value.
View 3 Replies
View Related
Mar 20, 2008
Hello frnds Can Anybody explai what does it mean by question itself and how to resole it ?
View 2 Replies
View Related
Jun 1, 2007
Hi..
I'm running a package that has a XML Task in the control flow. This task tranforms a XML file with a XSLT.
The file is about 2 megs on a daily basis, but at the end of the month there is a full dump of data that makes the file to be around 400 megs. There is where my problem is.
I run this on my 2 GB memory workstation and when the memory gauge on the task manager reaches about 1.5gb the package fails with an "Out of memory exception".
I also run this package on a 8GB Ram server, and same applies.
Is there any way of making this package utilize all the available memory, I even increased the virtual memory to see if that helped my issue, but nothing.
Thanks
View 10 Replies
View Related
May 7, 2007
When I compile or save a SSiS package in the SQL Server Business Intelligence Development Studio I get the error
Failure saving package. (Microsoft Visual Studio)
Insufficient memory to continue the execution of the program.
Sometimes, if I wait longer time, the package can suddenly be saved.
I have 2 GB of RAM und over 15 GB of free space on my disk. Thus, there should be anough space to save the package.
What should I do to resolve this problem? It seems to be a bug.
To splitt the package would not be a solution.
View 1 Replies
View Related
May 3, 2006
If we have a SQL Server 2005 standard edition/Windows 2003 Standard Environment on a 32 bit 2 dual core proc Dell 2850 server, what is the maximum size of the memory we could possibly have?
Thank you,
Shiva
View 4 Replies
View Related
Nov 22, 2005
I have a WO-WO (no sorting, aggregating, etc.) SSIS package that reads ~26,000,000 rows from a SQL DataReader source, looks up a bunch of surrogate keys, derives a couple of values, and writes out to two SQL Server Destinations. The process gradually consumes all of the memory on the server, slowing it to a crawl. I reconfigured SQL Server to use a maximum of 8000 MB to mitigate the problem; however, the memory is not released unless I stop and restart SQL Server. Is this expected behavior for SSIS?
View 4 Replies
View Related
Aug 2, 2006
Hi
I did a load testing and found the following observations:
1. The Memory:Pages/sec was crossing the limit beyond 20.
2. The Target Server Memory was always greater than Total Server Memory
Seeing the above data it seems to be memory pressure. But I found that AvailableMemory was always above 200 MB. Also Buffer Cache HitRatio was close to 99.99. What could be the reason for the above behavior?
View 1 Replies
View Related
Jun 27, 2007
Hi!
I am currently encountering an error of testing an SSIS package in the server.
The package runs fine on my laptop, but not in the server.
I appreciate it for any of your input, comments, and suggestions.
The package is to populate records (150k rows) from a DB2 table and insert them into
another DB2 table (12,754,715 rows).
The server,
Windows Server 2003 Enterprise
SQL server 2005 sp1
8 CPUs
6 GB RAM
Native OLE DBIBM OLE DB Provider for DB2
My laptop,
Windows 2000 Professional
SQL server 2005 sp1
2 CPUs
2 GB RAM
Native OLE DBIBM OLE DB Provider for DB2
It fails on the insertion part (see the error message at the bottom). I have been playing with "DefaultBufferMaxRows" and "DefaultBufferSize" properties, but still no luck so far.
For the testing purpose, I even only select 2 rows from the source table, but it still fails with the same error message. And strangely, it still takes a very long time to process (for just two rows). In my laptop, it only takes few second to finish.
I have been really pulling my head to try to figure it out. Any of your help/input is highly appreciated! Thanks!
======================
Error Message
[POLICY [1683]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8007000E. An OLE DB record is available. Source: "Microsoft Cursor Engine" Hresult: 0x8007000E Description: "Out of memory.".
View 2 Replies
View Related
Aug 7, 2006
I've been working on serveral packages for the past hour and after finishing for the night I quickly wanted to check to see how much memory SQL Server was consuming on my laptop. It was using almost 500MB of memory. It typically hovers around 50-100MB when I'm not doing anything with it. Is this normal?
View 3 Replies
View Related
Sep 24, 2007
Hi -
I am facing 2 problems :
PROBLEM 1 :
We have a few packages that run pretty fast on a desktop server with 2 Gig RAM, Dual processor (approx 4-5 hours). But the same packages run very very slow on the another server containing 8 CPU and 12 Gig RAM (ran for 24 hours without completing).
PROBLEM 2 :
The CPU% ranges from 40-80% and the PF usage is stagnant at 2GB on desktop server for the same package. But in the 8CPU server, the CPU % ranges from 0-10% but the PF Usage raises from 750 MB to 8 GB.
This has become critical to our application.
TIA,
Shabs
View 4 Replies
View Related
Feb 8, 2008
Hi,
I have a series of SSIS packages, all of which are ultimately executed by a parent package.
I'm consitently getting "OutOfMemory" errors when working with the packages which is temporarily solved by closing Visual Studio and re-opening the package(s)... This solution is short lived however as the OutOfMemory error occurs quite quickly after re-opening, often after doing nothing other than altering a variables default value and attempting to save the package.
The average size of the packages in question (.dtsx files) is around 7,000kb with the largest being 12,500kb. The total size of all the solution's packages is ~75,000kb.
The Processes tab in Task Manager shows a Mem Usage counter for devenv.exe *32 of around 20,000kb when Visual Studio is first opened however, when a single ~6,000kb dtsx file is opened this counter jumps to +300,000kb and when the entire solution is opened (When the parent package is executed), the Mem Usage counter for devenv.exe *32 is a massive +800,000kb!!!
Is this normal SSIS behaviour or do I have a major problem? Any tips or suggestions as to how to resolve this issue would be gratefully received.
FYI, "SELECT @@VERSION" gives me "Microsoft SQL Server 2005 - 9.00.3042.00 (X64) Feb 10 2007 00:59:02 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2) "
My Server is Windows Server 2003 R2 Enterprise x64 SP2 with 8GB of RAM.
Thanks in advance.
Leigh.
View 7 Replies
View Related
May 17, 2006
The Execute method in Microsoft.SqlServer.Dts.RunTime.Package class has memory leak after each invokation. This following code demonstrates it.
Output from the program:
Allocated memory after 1 iteration(s) = 476316
Allocated memory after 2 iteration(s) = 546448
Allocated memory after 3 iteration(s) = 555008
Allocated memory after 4 iteration(s) = 563632
Allocated memory after 5 iteration(s) = 572232
Allocated memory after 6 iteration(s) = 580856
Allocated memory after 7 iteration(s) = 589480
Allocated memory after 8 iteration(s) = 598240
Allocated memory after 9 iteration(s) = 606816
Allocated memory after 10 iteration(s) = 615424
Allocated memory after 11 iteration(s) = 624000
Allocated memory after 12 iteration(s) = 632576
Allocated memory after 13 iteration(s) = 641152
Allocated memory after 14 iteration(s) = 649728
Allocated memory after 15 iteration(s) = 658352
Allocated memory after 16 iteration(s) = 666948
Allocated memory after 17 iteration(s) = 675760
Allocated memory after 18 iteration(s) = 684380
Allocated memory after 19 iteration(s) = 693008
Allocated memory after 20 iteration(s) = 701532
//-----------------------------------------------------------------------------
// The Execute method in Microsoft.SqlServer.Dts.RunTime.Package has memory
// leak. This program demonstrates it. The package invoked by this program has
// only a single 'Script Task' that does nothing.
//
// To compile, add referece to Microsoft.SQLServer.ManagedDTS.dll.
//
// csc /r:"C:Program FilesMicrosoft SQL Server90SDKAssembliesMicrosoft.SQLServer.ManagedDTS.dll" ExecPackage.cs
//
//-----------------------------------------------------------------------------
using System;
using System.Diagnostics;
using Microsoft.SqlServer.Dts.Runtime;
namespace Misc
{
/// <summary>
/// Programmatically executes SSIS package, then displays memeory usage
/// after each execution. The memeory usage goes up after each
/// Package.Execute() call, which indicates memory leak!
/// </summary>
static class ExecPackage
{
static void DisplayUsage()
{
Console.WriteLine(@"Usage: ExecPackage <pkgName>");
Console.WriteLine(@" Package <pkgName> resides in Package Store on localhost under File System");
}
static void Main(string[] args)
{
// Parse command line arguments.
if (args.Length != 1)
{
DisplayUsage();
return;
}
string pkgName = @"File System" + args[0];
// Programmatically execute the package several times.
Application app = new Application();
for (int i = 1; i <= 20; i++)
{
Package pkg = app.LoadFromDtsServer(pkgName, "localhost", null);
pkg.Execute(); // comment out this line, then allocated memory does not increase
// Process.Start("dtexec.exe", "/dts "" + pkgName + """);
pkg.Dispose();
pkg = null;
// Do garbage collection, then display memory usage
GC.Collect();
Console.WriteLine("Allocated memory after {0} iteration(s) = {1}",
i, GC.GetTotalMemory(true));
}
}
}
}
View 36 Replies
View Related
Feb 27, 2007
HI ,
Need some quick fix Help
I have been
trying to load data from AS400 to DB2 (windows) using ADO.NET connection in
Data reader source and OLEDB Destination (IBM Oledb provider )
The files, Im trying to load, have
number of rows more then 15 million.
On execution of the package I get
Out of Memory Error (see below)
My Destination Box is 4GB+ RAM and 4
CPU Box.
There seems to be some Buffer and
Swapping related issue which Im not able to figure out. It says that System is
unable to allocate memory
Please help me on the same.
Thanks in Advance
Amit S
SSIS package "ABCDE
1.dtsx" starting.
Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2003 to 2004, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2003 to 2004, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at ABCDE
2003 to 2004, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at ABCDE
2003 to 2004, OLE DB Destination [12]: An OLE DB error has occurred. Error
code: 0x8007000E.
An OLE DB record is available.
Source: "Microsoft Cursor Engine" Hresult: 0x8007000E Description:
"Out of memory.".
Error: 0xC0047022
at ABCDE 2003 to 2004, DTS.Pipeline: The ProcessInput method on component
"OLE DB Destination" (12) failed with error code 0xC0202009. The
identified component returned an error from the ProcessInput method. The error
is specific to the component, but the error is fatal and will cause the Data
Flow task to stop running.
Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "WorkThread0" has exited with
error code 0xC0202009.
Error: 0xC02090F5
at ABCDE 2003 to 2004, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.
Error: 0xC0047038 at ABCDE
2003 to 2004, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "SourceThread0" has exited with
error code 0xC0047038.
Information: 0x40043008 at ABCDE
2003 to 2004, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at ABCDE
2003 to 2004, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at ABCDE
2003 to 2004, DTS.Pipeline: "component "OLE DB Destination"
(12)" wrote 289188 rows.
Task failed: ABCDE 2003 to
2004
Warning: 0x80019002 at ABCDE
1: The Execution method succeeded, but the number of errors raised (6) reached
the maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.
Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
2.dtsx
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Execute phase is beginning.
Information:
0x4004800D at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The buffer manager failed
a memory allocation call for 10484320 bytes, but was unable to swap out any
buffers to relieve memory pressure. 3 buffers were considered and 3 were
locked. Either not enough memory is available to the pipeline because not
enough are installed, other processes were using it, or too many buffers are
locked.
Error: 0xC0047012
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: A buffer failed while allocating
10484320 bytes.
Error: 0xC0047011
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The system reports 63 percent memory
load. There are 4294660096 bytes of physical memory with 1548783616 bytes free.
There are 2147352576 bytes of virtual memory with 227577856 bytes free. The
paging file has 6268805120 bytes with 3607072768 bytes free.
Error: 0xC02090F5 at ABCDE
2005_04 to 2005_11, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.
Error: 0xC0047038 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "SourceThread0" has exited
with error code 0xC0047038.
Error: 0xC0047039 at ABCDE 2005_04
to 2005_11, DTS.Pipeline: Thread "WorkThread0" received a shutdown
signal and is terminating. The user requested a shutdown, or an error in
another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "WorkThread0" has exited
with error code 0xC0047039.
Information: 0x40043008 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at ABCDE
2005_04 to 2005_11, DTS.Pipeline: "component "OLE DB
Destination" (12)" wrote 0 rows.
Task failed: ABCDE 2005_04 to
2005_11
Warning: 0x80019002 at ABCDE:
The Execution method succeeded, but the number of errors raised (7) reached the
maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.
Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
3.dtsx
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Pre-Execute phase is beginning.
¦¦.
¦¦¦¦
View 11 Replies
View Related
May 25, 2006
I've read that SSIS tries to do all transformations in memory as a way of enhancing processing speed. What happens though if the amount of data processed exceeds the available RAM? Are raw files then used (similar to staging tables) or is an error generated?
Barkingdog
View 1 Replies
View Related
Apr 8, 2009
I'm busy rewriting DTS packages as SSIS packages. As and when I finish a package I run it in debug mode via Microsoft Visual Studio and then examine the Exection Results to see the messages generated.
Now it may or may not matter how I run the package but the following warning has been generated :-
[SSIS.Pipeline] Warning: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
View 9 Replies
View Related
