Merge Replication - Setting Identity Range Management.
Feb 2, 2007
Hi All;
I am trying to set up Merge Replication on a database and want to set the IdentityRange Management to Auto for all my tables which use a Identity column.
In the wizard, on Article Properties Page, I can do this by selecting a Table, and going for its properties, but this is a tedious task as I have ~300 tables to set this property on.
Is there another way or a global location where I can set the property to true and even mention the ranges and the threshold, so that I dont have to pick each table and set it individually.
I am also aware of the fact that I can Generate a Script and modify it and run that, but I was looking for some way to do this in the wizard.
Thanks!
View 1 Replies
ADVERTISEMENT
Dec 1, 2005
I have implemented replication between 2 servers (SERVER1 AND SERVER2) and for test purposes i just have 1 table(Table1) in the publisher.
View 1 Replies
View Related
Jan 8, 2008
Hi all i have setup merge replication with one publisher and 3 subscribers
The replication worked fine for about 2 months then i recieved the following error on all my subscriptions
The Publisher failed to allocate a new set of identity ranges for the subscription.
This can occur when a Publisher or a republishing Subscriber has run out of identity
ranges to allocate to its own Subscribers or when an identity column data type does
not support an additional identity range allocation. If a republishing Subscriber has
run out of identity ranges, synchronize the republishing Subscriber to obtain more
identity ranges before restarting the synchronization. If a Publisher runs out of identit
(Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199417)
Get help: http://help/MSSQL_REPL-2147199417
I have updated my sql server to service pack 2
The publisher is sql Standard edition and the subscribers are Express edition
Any help would be great
Thanx
View 3 Replies
View Related
Jun 14, 2010
I'm having a problem with merge replication. Â My publisher and subscriber are SQL 2008 SP1, and my distributor is SQL 2008 R2. Â Currently, there is no access to the subscriber data aside from the replication agents, so there are no data changes going on there, data is only being modified on the Publisher. Â My plan was to get everything setup and do some internal testing before releasing the subscriber for use.
View 4 Replies
View Related
May 8, 2006
Hello,
We have a couple of tables that can have quite a bit of data each day prior to replication. Can we increase the default values for a table for each subscription? For example we have a table called table1 and on the sqlexpress client they could enter in 10000 rows a day, on table2 it's just 100 rows a day. How can we increase the values to where we do not get the error for table1 stating that the insert failed because it conflicted with the identity range check constraint. Thanks in advance.
View 1 Replies
View Related
Dec 21, 2006
Hello all,
I am just beginning to get into replication and have a couple questions for the experts.
When I set up replication (transactional with queued updates), the default identity range was set to 10,000 for the publisher and 1,000 for the subscriber. I understand that if I try to insert 1,100 records at the subscriber, I will get an error saying that the identity range has been exhausted and I need to run sp_adjustpublisheridentityrange on the publisher and the Distribution Agent for the subscriber.
My questions are:
Why wouldn€™t someone increase the identity range to a very large number, just in case something happens and the publisher/subscriber link is broken for an extended period of time? What are the ramifications to a larger identity range?
Since identity range management is done by the distributor, what happens if the distributor goes down? Do the publisher and subscribers receive errors when they fill their current ranges?
Thanks,
Jarret
View 1 Replies
View Related
Nov 22, 2006
I am using merge replication with automatic identity range management
I want to be able to give a disconnected subscriber a warning message if a certain percentage of the allocated subscriber identity range has been used
- so that they can make sure they reconnect soon to obtain a new identity range
I can get the current identity value OK, but I can't find a good way of finding the current permitted primary and secondary ranges
The information is available in the check constraint, but I don't really want to have to parse this!
CONSTRAINT [repl_identity_range_0DF907AC_40CF_4849_9BD0_2173C90A3805] CHECK NOT FOR REPLICATION (([ContactID]>(10000040000.)
AND [ContactID]<=(10000050000.) OR [ContactID]>(10000050000.) AND [ContactID]<=(10000060000.)))
I can't find any system view which will provide this information
Is there a recommended way of doing this?
Thanks
aero1
View 3 Replies
View Related
Mar 6, 2007
Hello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies
View Related
Aug 15, 2007
Hi,
I am trying to set up Web Synchronization using Merge Replication. The Distributor and Publisher are on the same machine. Subscriber is a windows mobile application which syncs the data using web synchronization. I have configured IIS on web server for the sync. However there is no domain user on database and web server. Is it possible set up web sync without a domain user? Which user can I then use to give permissions on the snapshot share folder.
Any help is appreciated.
Thanks
View 8 Replies
View Related
Jan 31, 1999
Dear all,
How does an identity is affected by merge replication? Can sql control it so that there will be no replication conflict?
Here's the scenario, I have several tables with an identity column. the database resides in a server in the head office, there are several remote sites and remote users which will be running sql 7 desktop edition. Each remote will download only the data subset he is allowed to. Each site will be allowed add new rows on several table. Then they will update the head office server through replication.
Thanks
Reden
View 1 Replies
View Related
Aug 2, 2006
Hello.I am trying to use Transact SQL to prepare publication for replication (SQL Server 2000 SP4 and SQL Mobile). I can easily create publication, add filters etc. but there is one thing which I can't find : parameter which tells me subscriber type and allow me to change subscriber type for publication. I don't know where I can change (or even if I can change) this property.
If someone made publication for mobile devices and replication with filters,resolvers etc. will it be a problem to share experiences here? Maybe some sample code with script or something what will guide me. Thanks in advance. Maciej Wysocki
View 4 Replies
View Related
Aug 8, 2007
Sever: sql 2000
Replication: Merge
Issue:
I am having an issue with my audit table, This table is filled by Triggers on various tables through the database. All triggers are defied with "not for replication"
I have allocated 500k ranges, with 80% threshold to the publisher and subscriber databases for this table. The table only holds 225,000 records.
From time to time I get the following error "The identity range managed by replication is full and must be updated by a replication agent. The INSERT conflict occurred in database 'PublicationName', table 'AuditHistory', column 'AuditID'. Sp_adjustpublisheridentityrange can be called to get a new identity range."
When I looked into the issue yesterday I noticed that the identity range being used by replication was 334300001 -> 334799999, however the maximum value in the table was 334300096, meaning that only 95 records were inserted, which means it is no where near the 80% threshold.
Somehow the identity seed on the AuditHistory table had been changed to 334800104, which is outside the allowable range.
My question is what could cause the identity seed to get set to such a high number??
any thoughts would be great!
View 2 Replies
View Related
Apr 5, 2008
I have a database table with a simple identity column. As a starting point... when I run the following queries... this is what I get:
SELECT Max(AliasID) FROM Account_Managers
1300006
DBCC CHECKIDENT ('Account_Managers')
Checking identity information: current identity value '1300006', current column value '1300006'.
Now... I set up merge replication, with the plan of allowing SQL Server to manage my identity ranges for me. I set up my ranges to be 100000 on the publication, 100000 on the subscriber, with a threshold of 80.
I would EXPECT to see the constraint
([AliasID]>(1300006) AND [AliasID]<=(1400006)) on the publisher and
([AliasID]>(1400006) AND [AliasID]<=(1500006)) on the subscriber.
However... what I do get is:
([AliasID]>(1300006) AND [AliasID]<=(1400006) OR [AliasID]>(1400006) AND [AliasID]<=(1500006)) on the publisher and
([AliasID]>(1500006) AND [AliasID]<=(1600006) OR [AliasID]>(1600006) AND [AliasID]<=(1700006))
Can anyone tell me why I get the OR... which essentially makes my identity ranges twice as large as they should be?
Thanks in advance.
- Alan D. Nelson
View 2 Replies
View Related
May 16, 2015
We are running merge replication. My identity value was out of sync and the inserts stopped working. I Reseeded the identity value to 1500000 and ran "sp_adjustpublisheridentity" which set that to the new range (and table constraint)Â in the MSMerge file and table. I discovered my error and Reseeded the table back to 150000. How to I get the new range to be created when it is LESS than 1500000 in the MsMerge file???? Can I use the sp_restoreidentity....???
View 3 Replies
View Related
Nov 3, 2015
I was reading this:
"Adding an identity column to a published table is not supported, because it can result in non-convergence when the column is replicated to the Subscriber. The values in the identity column at the Publisher depend on the order in which the rows for the affected table are physically stored. The rows might be stored differently at the Subscriber; therefore the value for the identity column can be different for the same rows."
I don't understand...
If I create a table with an identity column and publish it. Can the values on the subscriber be different when the data is replicated?
Suppose I have a this table:
1 Name1
2 Name2
3 Name3
Column 1 is identity field and column 2 the name of employees.
If I publish this table , the data can be inserted on the subscriber .pe, with 2 name1 and 1 name3 and 1 name2?
What about if the identify fields is a primary key?
View 6 Replies
View Related
Jul 23, 2007
Hello I currently have a merge replication set up with 4 subscribers. A primary field for one of my tables is set to a integer indetity.
What Ive noticed is that depending on which database I enter data into, the indentity field (primary key) is set within a certain range I.e
On Server 1 - Values start from 1 then 2,3,4 etc etc
Server 2 - 24001, 24002, 24003 etc etc
Server 3 - 46001, 46002, 46003 etc etc
Server 4 - 68001, 68002, 68003
My question is what happens when these ranges eventually conflict? Do they automatically gain a different range such as 142 001, 142 002 etc etc?
Ive tried looking in SQL Help, and a quick search here, Im just after some confirmation before I implement this to my app.
cheers
View 1 Replies
View Related
Dec 21, 2005
Hi,
I read the BOL on how the publisher will had out identity ranges to subscribers, but it was not clear if this was also the case for anonymous subscribers. Will merge replication with identity columns work with anonymous subscribers that sync via HTTPS?
Thanks,
Darrell Young
View 1 Replies
View Related
Oct 28, 2006
Replication Type: Transactional With Updateable Subscriptions
SQL Server Version: SQL Server 2005 Enterprise Edition
Publisher, Subscriber1 and Subscriber2 all on same SQL Server
Problem: I am trying to set up a transactional replication with two updateable subscriptions. All three databases are a carbon copy of each other. Every table to be replicated contains an identity key column. I've been asked to create the replication without assigning separate identity ranges for the publisher and the updateable subscriptions. In other words they want a continous ID range. Can this be done without managing identity ranges programatically outside of SQL Server itself?
Example:
Publisher inserts into table test1 in database1. This creates ID 100 for the record. ID 100 replicates to Subscriber1 (database2) and Subscriber2 (database3).
Subscriber1 and 2 identity seeds are then incremented to ID 100. So far, all three databases have the same identity seed in table test1. Subscriber1 inserts into table test1 in database2. This creates ID 101 for the record. ID 101 is replicated to Subscriber2 (database3) and to the publisher (database1).
Subscriber2 identity seed is then incremented to ID 101. However, the Publisher retains it's original identity seed of 100.
Insert into Publisher table test1 will fail since it will try to insert the identity seed of 101 which is taken.
I have tried identity range management Automatic and Manual. Both seem to have some limitations in managing identity seeds unless different identity ranges are assigned for publisher and subscriber.
Can someone recommend a solution to this problem? Can this be done natively in SQL Server 2005 replication. Or can some recommend another approach to make this work?
View 3 Replies
View Related
May 8, 2007
Hoping someone may be able to help with a problem I'm having with SSRS parameters....
My report has 2 parameters - the User Id used to login to the application and the Department(s) within the organisation. Based upon the User's role, the user may have access to data for one or many Departments.
Thus, the first parameter needs to be set in code based upon the User's login, however, the range of the second parameter (i.e. the range of Departments that the user can access) is controlled by the value of the first parameter.
The second parameter is to appear as a drop-down of Departments to which the User has access.
The report is to be produced for the selected Department.
Are you able to advise how to restrict the range of values for the second parameter based upon the value of the first parameter?
Any help is much appreciated.
View 3 Replies
View Related
Feb 6, 2007
i have a publisher and a few suscribers running with sql 2003
I use automatic range handling to manage some identity columns in some tables
How can I to modify manually the value of the next range that the publisher will assign to the next suscriber that need a range?
View 3 Replies
View Related
Feb 7, 2007
I need to import some data into a table that is in a merge bi-directional publication. The table has an identity column that is being "auto managed". The ID numbers I need to import are not within any of the assigned "ranges". They are less than any of the current ranges.
Turning ident_insert on does not work because of the check constraints error. The merge replication triggers validate the ID range as well.
Edit: using SQL 2005 standard publisher and subsciber. Publication is 2005.
View 7 Replies
View Related
Aug 13, 2007
Hi!
I have table with complex index on 5 fields. One of them is string filed. I want to implement some sort of filtering, by setting SetRange() in my SQLCeCommand. But i need to fileter only by one string field and to get the values starting with the input string value.
I tried to use such code:
...
command.SetRange(DbRangeOptions.Prefix, new object[] {null, null, null, "Com", null}, null);
resultSet = cmd.ExecuteResultSet(ResultSetOptions.Scrollable);
....
But it doesn't work. As a result i've got an empty result set.
Usage of simple index on one field and setting the correspondent range will solve problem, but i can't have such index due to project restrictions.
Is there any way to set prefix range only by one value of complex index? If not, please, explain me how does Prefix Range works.
Thanx
View 1 Replies
View Related
Mar 6, 2014
If the partitioning MERGE command attempts to drop historic data at the wrong boundary point then data movement between file groups may be necessary before or during the next index rebuild. The script below creates 2 test tables, one using a range right function and the other using range left. The partitioning key is a number between 0 - 59, an empty partition is maintained at the start and end of ranges, 4 partitions contain data in the ranges between 0-14, 15-29, 30-44, 45-59. Data in the lowest range (0 - 14) is switched out and a merge command is run, edit the script to try the different merge boundaries, edit the variables at the start to suit runtime environment 'Data Drive' & 'Log Drive' paths.Variables are redeclared but commented out at the start of code blocks to allow stepping through if desired.
--=================================================================================
-- PartitionLabSetup_20140330.sql - TAKES ABOUT 1 MINUTE TO EXECUTE
-- Creates a test database (workspace)
-- Adds file groups and files
-- Creates partition functions and schema's
-- Creates and populates 2 partitioned tables (PartitionedRight & PartitionedLeft)
[Code] ....
The T-SQL code below illustrates one of the problems caused by MERGE at the wrong boundary point. File Group 3 of the Range Right table is empty according to the data space views, it cannot be dropped though. File Group 2 contains data according to the views but you are allowed to drop it's file.
USE workspace;
DROP TABLE dbo.PartitionedRightOut;
USE master;
ALTER DATABASE workspace
REMOVE FILE PartitionedRight_f3 ;
--Msg 5042, Level 16, State 1, Line 2
--The file 'PartitionedRight_f3 ' cannot be removed because it is not empty.
ALTER DATABASE workspace
REMOVE FILE PartitionedRight_f2 ;
-- Works surprisingly although contains data according to system views.
If the wrong boundary point is used then the system 'Data Space' views show where the data should be (FG2), not where it actually still is (FG3). You can't tell if data movement between file groups is pending and the file group files are not protected from deletion by the OS.
I'm not sure this is worth raising a connect item for but it would be useful knowing where data physically resided after a MERGE RANGE and before an INDEX REBUILD, the data space views reflect the logical rather than the physical location if a data movement is pending.
View 0 Replies
View Related
Feb 28, 2006
I'm trying to write a small script that sets the identity on 7 tables that don't have an identity set yet. Can someone advise on the syntax?
View 7 Replies
View Related
Jan 21, 2008
I want to crete temporary table with this coammnd "CREATE TABLE Temp (ID int, name varchar(50))". I would like to know which command is used for setting primary key and identity on ID field. Thankyou in advance.
View 2 Replies
View Related
May 26, 2015
What is the main difference between snapshot and transactional and merge replication?
View 5 Replies
View Related
Mar 9, 2001
Hi,
I have been trying to figure out how to use ALTER TABLE/ COLUMN to modify a column from an IDENTITY column to one which is not an IDENTITY column.
I would like to do this so that I could add another column (using ALTER) and set it as the IDENTITY column.
Any thoughts?
Your help is much appreciated,
-Scott
View 1 Replies
View Related
Mar 8, 2004
Hello,
I am relativley new to SQL and have a question about identity fields.
I am creating a script to run everynight to insert records into a support table in a database. one of the fields is a identity field that is updated everytime a record is added locally or over the web.
Some records that are added into the database locally by users do not get added into theis support table, but so those new people entered in can use the website a entry must be added to this support table.
I am working on a script to take the records that where added by users and automatically put them in every night using a basic schedueled job.
The identy number is updated everynight in a table that collects all the important identiy numbers. I would like to use this table to alter the seed value and then increment by one every time a new record is added. This is my only sticking point so far.
Any help would be greatly appreciated.
Kenn Brown
View 13 Replies
View Related
Mar 6, 2007
After I install SQL Server 2005, the default language of the interface of Management Studio is Chinese-Traditional.
How do I switch to English?
Thanks for any reply
View 3 Replies
View Related
Jul 20, 2005
I have a situation with a 6 server setup whereby merge agentswill not run if other merge agents are alreay running. Basicallywe have a 5 laptop, one tower config with the tower being thepublisher. In theory we want to be able to hook a laptop upand have it sync within, say, 5 mins. Trouble is, if agents forthe other laptops are running (trying and failing to connect becausethose laptops aren't connected) then the agents for the laptop that*is* connected won't run. It seems to be a 'maximum number of runningagents' issue. Is this is user defined setting, and if so where can I set it?Many thanks, sorry if this has been answered many many times before.Jim--Find me at http://www.ursaMinorBeta.co.uk"Brace yourself, this might make your eyes water."
View 3 Replies
View Related
Jul 28, 2015
I have few tables, which are replicated and partitioned. They also have archival process. I want to avoid having to run that same process on the subscriber.
Replication of partition switching is easy. However I am not sure how to replicate merge range and empty filegroup/file drops.
There the following article options:
Copy file group associations
Copy table partitioning schemes
Copy index partitioning schemes
I am not sure if these are enough to implement the replication of merge range and empty filegroup/file drops.
I could not find and option to copy partition functions.
View 0 Replies
View Related
Aug 30, 2007
Hi all,
I know that adding a column using ALTER TABLE to add a column automatically allows SQLSERVER 2005 to replicate the schema changes to the subscribers, however, I would like to add a new column to an existing article that is being used for merge replication, however, I don't want this column to be replicated. Re-initialising the subscriptions is not a option. Help would be appreciated.
I am using SQLSERVER 2005 (SP1).
View 3 Replies
View Related
Jul 21, 2006
I re-created a publication that was having problems and it gives this error when I start the snapshot agent from SQL Server Management Studio: I am stuck on how to resolve - any ideas?
"The publisher's identity range allocation entry could not be found in MSmerge_identity_range table. Transaction count after EXECUTE indicates that a commit or ROLLBACK TRANSACTION statement is missing. Previous Count = 1, current count = 2."
select * from MSmerge_identity_range returns 19 entries but I don't know how to fix.
I have tried deleting and re-creating but always get this error.
My other publications and subscriptions are working fine and I was able to create a new test publication that worked but can not get this one to work that worked fine up until today.
Any ideas?
View 2 Replies
View Related
