Multiple Rows Combined Based On A Column
Sep 6, 2011
I have a table with two columns refid and name and it has the following values
1 tom
1 jim
2 bob
1 bob
I need a resultset that would have the following values
1 tom, jim, bob
2 bob
I have tried couple of things one being:
DECLARE @namelist VARCHAR(1000)
SELECT @namelist = COALESCE(@namelist +', ' ,'') + name FROM sales where refid = 1
SELECT @namelist
But I am looking for a resultset with a unique refid and all the names comma separated for that refid.
View 2 Replies
ADVERTISEMENT
Sep 5, 2014
I need to split a row into multiple rows based on multiple column values.
time_id = 111
employee_id = 222
time_in = 10:00
time_out = 16:00
break1_in = 12:00
break1_out = 13:00
break2_in = 14:00
break2_out = 15:00
I would like to break this into multiple time_in/time_out based on if they have breaks. Breaks are not required and will come across blank if non are taken.
row 1
time_in 10:00
time_out 12:00
row 2
time_in 13:00
time_out 14:00
row 3
time_in 15:00
time_out 16:00
View 2 Replies
View Related
Oct 24, 2007
Hi All :CREATE TABLE TABLEA(Person Varchar(20), Country Varchar(20), SubjectVarchar(20), Type Char(1))INSERT INTO TABLEA VALUES ('Einstein', 'Germany', 'Physics', 'P')INSERT INTO TABLEA VALUES ('Kant', 'Germany', 'Philosophy', 'Q')INSERT INTO TABLEA VALUES ('Kafka', 'Germany', 'Writer' , 'W')INSERT INTO TABLEA VALUES ('Aristotle', 'Greece', 'Philosophy', 'Q')INSERT INTO TABLEA VALUES ('Archimedes', 'Greece', 'Physics', 'P')INSERT INTO TABLEA VALUES ('Homer', 'Greece', 'Writer' , 'W')SELECT * FROM TABLEAI am on SQL 2000.I need an output where i have to have a resultset grouped on Type, butthe results in one row.In the resultset I needTypeP PersonType P Country, Type Q Person, Type Q Country, TypeW Person Type W Country---------------------------------------------------------------------------------------------------------------------Einstein:ArchimedesGermany:GreeceKant:Aristotle Germany:GreeceKafka:HomerGermany:Greece************************************************** *************I have written a puesdo-cursor code to do the same, but if there is away to do as a set operation, that would be greatPlease select as a whole and past in query analyser as the resultsetis all overlaid when i paste in this box.Thank youRS
View 2 Replies
View Related
Jan 30, 2015
Deciding whether or not to use a CTE or this simple faster approach utilizing system tables, hijacking them.
SELECT s.ORDER_NUMBER, s.PRODUCT_ID, 1 AS QTY, s.VALUE/s.QTY AS VALUE
FROM @SPLITROW s
INNER JOIN master.dbo.spt_values t ON t.type='P'
AND t.number BETWEEN 1 AND s.QTY
Just wanted to know if its okay to use system tables in a production environment and if there are any pit falls of using them ?
View 1 Replies
View Related
Jun 2, 2015
I have a table that is used to build rules. The rules point to other columns in other tables and usually contain only one value (i.e. ABC). But one of the options is to add a comma-separated list of SSNs (i.e. 123123123,012012012,112231122). I am trying to build a single query that allows me to leverage that list to get multiple rows from another table.
This obviously works:
SELECT * FROM vw_Person_Profile P (NOLOCK)
WHERE P.PrsnPIISSN_Chr IN ('123123123','012012012','112231122')
But this does not:
SELECT * FROM vw_Person_Profile P (NOLOCK)
WHERE P.PrsnPIISSN_Chr IN (
SELECT '''' + REPLACE(CONVERT(VARCHAR(4000),txtFieldValue), ',', ''',''') + ''''
FROM MassProcessing_Rules PR
WHERE PR.intRuleID = 10
)
View 5 Replies
View Related
Mar 21, 2006
Hello again,
Another combining multiple rows teaser, during a few routines I made a mistake and I would like to combine my efforts. Here is my data:
Code:
Table A
ID DSN VN AX Diag
1111296.54
3212318.00
Both DSNs share the same Patient_id in a seperate table which holds the DSN numbers and their corresponding patients.
Code:
Table B
DSN Patient_id
100000001
200000001
So what I need to do is maintain their unique 'ID' number in Table A but update their DSN numbers to reflect the first instance in Table B. So my data would look like this in both tables.
Code:
Table A
ID DSN VN AX Diag
1111296.54
3112318.00
Note: The second rows DSN changed to 1 from 2
Code:
Table B
DSN Patient_id
100000001
(Duplicate row removed with same patient_id)
The result would look like the above but as you noticed I need to remove the duplicate row that had the different DSN in Table B so that only one DSN remains that can map to multiple rows (IDs) in Table A.
Table A:
DSN can map to multiple rows (IDs)
IDs must be unique (aka kept to what they are currently)
Table B:
Second row with same DSN must be removed.
Any takes, ideas? I need to do this on a couple thousand rows....
Thanks, and im happy to clarify if needed.
View 1 Replies
View Related
Oct 2, 2014
I have two tables that look like this (below). One tells me the name of my product, the Amazon Category it is in & the amount that I want to sell it for. The other tells me the Category & the fee for that category. So far so good. Though it gets tricky in the sense that some categories have two tiers. So in Electronics, the fee for $0.00 - $100.00 is 15%. But from $100 and up it is 8%.
Since it has two columns & both of the new columns pertain to the fee of my product, I can't figure out how to use both at once. For my $599.99 example it would be ($100 * 0.15) + ($499.99 * 0.08) = $55.00. Would I pivot the data? If not, how would I group it to be considered together?
Category Example
IDAmazonCategoryIDAmazonCategoryNameFeePercentageStartPriceEndPrice
1apsAllDepartments0.150.000.00
2instant-videoAmazonInstantVideo0.000.000.00
3appliancesAppliances0.150.000.00
Product Example
1Product1Electronics9.99
2Product3Electronics99.99
3Product2Electronics599.99
Raw SQL
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE #Amzn_Category_FeeStructure(
[ID] [int] IDENTITY(1,1) NOT NULL,
[Code] ....
I use Microsoft SQL 2008
View 2 Replies
View Related
Feb 5, 2007
I'm dealing with a problem.
The record information example
DateTimeStart , DateTimeEnd , action , duration (seconds)
2007-02-02 10:30:22 , 2007-02-02 11:30:22 action1 , 600
what i want is for every half hour between start and end a record
10.30 action1
11.00 action1
11.30 action1
how can i create this, i'm a little stuck on this
View 2 Replies
View Related
Apr 12, 2007
Hello All
I am trying to figure out if what i am attempting to do is possible and whether or not my approach is wrong to begin with.
I am trying to build a custom report for our accounting system which is Traverse from Open systems. This is what i have done in the stored procedure thus far
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
ALTER PROCEDURE rptArFLSalesByCustItemized_sp
@custId pCustID,
@dateFrom datetime,
@dateThru datetime,
@itemIdFrom pItemId,
@itemIdThru pItemId
as
set nocount on
-- define some variables for previous year
declare @LYqty int, @LyAmt money, @LYfrom datetime, @LYthru datetime
-- set defaults
SET @itemIdFrom=ISNULL(@itemIdFrom,(SELECT MIN(itemId) FROM tblInItem))
SET @itemIdThru=ISNULL(@itemIdThru,(SELECT MAX(itemId) FROM tblInItem))
SET @LYfrom=DATEADD(YEAR,-1,@dateFrom)
SET @LYthru=DATEADD(YEAR, -1, @dateThru)
-- create small temp table to hold customer info
Create Table #tmpArCustInfo
(
custId pCustID,
custName VARCHAR (30),
)
-- populate customer temp table with info
Insert into #tmpArCustInfo
select custId, custName
from tblArCust
WHERE custId = @custId
-- create a temp table to hold the Data for each Item
Create Table #tmpArSalesItemized
(
itemId pItemId,
productLine VARCHAR (12),
pLineDesc VARCHAR (35),
descr VARCHAR (35),
LYQtySold int,
LYTDQtySold int,
QtySold int,
LYTDsales money,
totalSales money,
LastInvDate datetime,
)
-- populate the temp table with all of the inventory items
insert into #tmpArSalesItemized
select ii.itemId, ii.productLine, ip.Descr, ii.Descr, 0,0,0,0,0, NULL
from tblInItem ii, tblInProductLine ip
where ip.productLine = ii.productLine
AND ii.itemId BETWEEN @itemIdFrom AND @itemIdThru
-- update table with this years quantities
update #tmpArSalesItemized
SET QtySold = (select SUM(QtyOrdSell) from tblArHistDetail hd
where TransId IN (select TransId from tblArHistHeader where custId = @custId)
AND orderDate IN (select OrderDate from tblArHistHeader where OrderDate BETWEEN @dateFrom AND @dateThru)
AND hd.partId BETWEEN @itemIdFrom AND @itemIdThru
GROUP BY hd.partId
)
-- Return the temp tables results
select * from #tmpArSalesItemized, #tmpArCustInfo
drop table #tmpArSalesItemized, #tmpArCustInfo
return
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
My problems begin where i want to start updating all of the Qty's of the QtySold field. I have managed to get it to write the same sum in every field but i cannot figure out how to update each row based on the sum of the qty found for that item in the tblArHistDetails table, trouble is too that there is no reference to the custId in that table either. The custId resides in tblArHistHeader and is linked to the details table via the TransId column. So really i need to update many rows based on criteria from 2 other tables.
Can anyone please help? I dont have a clue how to make this work, and most of what i have learned about sql thus far has been from opening other stored procs etc in the accounting system and just reading to see how the developers have done things.
Thanks
Jamie
View 1 Replies
View Related
Jun 5, 2008
Hi,
I have 1 table with 5 rows. One of the rows has dateTime values. I want to know how many rows there are with a value in that column < today AND how many rows there are with a value in that column > today.
I'm not sure how to do this.
SELECT Count(*) WHERE dateColumn <= today AND dateColumn > today gives me everything.
I like to end up with a column containing the count of rows <= today
and a column with rows where date > today.
Is this possible in SQL or do I have to retrieve all rows and then loop over the resultset and check each row?
Thanks,
Marc
View 2 Replies
View Related
Jul 17, 2013
I have a table of attributes set up as follows:
ID, Value, Group
1, Football, Sports
1, Baseball, Sports
1, Basketball, Sports
2, Baseball, Sports
3, Football, Sports
1, Lambda Sigma, Greeks
2, Delta Delta, Greeks
etc.
I want a query that will combine that values for each ID into one field per group. So if ID 1 has multiple sports but also a greek attribute, they end up with two rows; the first row containing the combined sports values and the second row the greek valued not combined, because there was only one value in that group for that ID. For example:
ID, Combined Values, Group
1, Football Baseball Basketball, Sports
2, Baseball, Sports
3, Football, Sports
1, Lambda Sigma, Greeks
2, Delta Delta, Greeks
View 5 Replies
View Related
Aug 28, 2007
Hi,
I have the following scenario :
CustomerDetail
customerid
customername
status
app_no
[status = 0 means customer virtually deleted]
CustomerArchive
archiveno [autoincrement]
customerid
customername
status
At the end of the month, I have to physically delete customers. I have written two stored procs:
proc1
create proc spoc_startdeletion
as
declare @app_no int
select @app_no = (select app_no from customerdetail where status=0)
EXEC spoc_insertcustomerarchive @app_no
-- After transferrin, physically delete
delete from customerdetail where status=0
proc2
create proc spoc_insertcustomerarchive
@app_no int
as
insert into customerarchive(customerid,customername,status)
select customerid,customername,status from customerdetail where app_no = @app_no
It works fine if there is only one row with status=0, however the problem is that when there are multiple rows in customerdetail with status=0, it returns 'Subquery returned more than one value'
How can i transfer multiple rows one by one from the customerdetail to customerarchive and then delete the rows once they are transferred.
Vidkshi
View 15 Replies
View Related
Mar 3, 2008
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
View 8 Replies
View Related
Nov 21, 2007
I have a form to assign JOB SITES to previously created PROJECT. The JOB SITES appear in the DataList as it varies based on customer. It can be 3 to 50 JOB SITES per PROJECT.
I have "PROJECT" table with all necessary fields for project information and "JOBSITES" table for job sites. I also created a new table called "PROJECTSITES" which has only 2 columns: "ProjectId" and "SiteId".
What I am trying to do is to insert multiple rows into that "PROJECTSITES" table based on which checkbox was checked. The checkbox is located next to each site and I want to be able to select only the ones I need. Btw the Datalist is located inside of a formview and has it's own datasource which already distincts which JOBSITES to display.
Sample:
ProjectId - SiteId
1 - 5
1 - 9
1 - 16
1 - 18
1 - 20
1 - 27
1 - 31
ProjectId stays the same, only values for SiteId are being different.
I hope I explaining it right. Do I have to use some sort of loop to go through the automatically populated DataList records and how do I make a multiple inserts to database table? We use SQL Server 2005 and VB for code behind. Please ask if I missed on some information. Thank you in advance.
View 10 Replies
View Related
Apr 7, 2015
I have a table in which each record has a initial date and a final date. I would like to create I query that gives me one row for each month between the initial date and the final date. It would be something like this:
Original:
Product|price|initial_date|final_date
A|20.50|2014-08-10|2014-10-01
B|50|2015-01-15|2015-02-20
Resulting view:
A|20.5|2014-08-01
A|20.5|2014-09-01
A|20.5|2014-10-01
B|50|2015-01-01
B|50|2015-02-01
I would like to do that, because these dates correspond to the time in which the products are in possession of sellers, so I would to use this resulting query to generate a pivot chart in Excel to illustrate the value of the goods that are with our sellers in each month.
Is it possible to do it? I think I could do that direct in VBA, but I think that maybe it would be faster if I could do it directly in SQL.
By the way, I am using MS SQL Server and SQL Server Manegement Studio 2012.
View 1 Replies
View Related
Sep 22, 2015
In a table I have some rows with flag A & B for a scode, some scode with only A and some are only B flags.
I would like to fetch all rows with flag A when both flags are present, no rows with B should be fetched. Fetch all rows when only single flags are present for a scode.How to achieve this using TSQL code.
View 2 Replies
View Related
Mar 13, 2006
Hello,
I am unable to figure out how to proceed after trying for more than a day. Should I add a parameter to the stored proc? How do I proceed?
I need to be able to show data for EdgeID 2,3,5,6,20,21 and so on...Right now I am showing data for 1, 4, 19 and so on based on the ReltTotID based on the result set below. This is because the table that the query below is selecting from adds up all common EdgeIDs to give one row for example
EdgeID Desc TermType ReltTotID
1Global Edge Model w/ Fwd Earn II T 1
2Short Term Global Edge Model w Fwd Earn IIS 1
3Long Term Global Edge Model w Fwd Earn IIL 1
4Emerging Market Edge Model w Fwd Earn T 4
5Short Term EM Edge Model w Fwd Earn S 4
6Long Term EM Edge Model w Fwd Earn L 4
19SmallCap Edge Model w/ Fwd Earn T 19
20SmallCap Short Term Edge Model w/ Fwd EarnS 19
21SmallCap Long Term Edge Model w/ Fwd EarnL 19
35Global+EM Edge Model w Fwd Earn T 35
The final query result is :
EdgeID Description Short Desc PerID UnivID DefID
1Global Edge Global Developed 500622355938
4Emerging Market Emerging Markets 500632356039
19SmallCap Edge Small Cap Edge 500642364244
I would like it to be :
1Global Edge Global Developed 500622355938
2Short Term Global Developed NULL2355938
3Long TermGlobal Developed NULL2355938
4Emerging Market Emerging Markets 500632356039
5Short Term Emerging Markets NULL2356039
6Long Term Emerging Markets NULL2356039
19SmallCap Edge Small Cap Edge 500642364244
19Short Term Small Cap Edge NULL2364244
19Long Term Small Cap Edge NULL2364244
The stored proc query is as below:
SELECT
EdgeModelID = em.EdgeModelID
--, EdgeModelID = em.EdgeModelID
, Description = m.Description
, ShortDescription = ISNULL(emdn.ParameterValue, m.ShortDescription)
, ViewPermissionID = emdp_perm.ParameterValue
, EdgeUniverseID = univ.UniverseID
, EdgeDefinitionID = univ.MemberID
FROM OptMod..GO_EdgeModels em
JOIN OptMod..GO_Models m
ON em.EdgeModelID = m.ModelID
AND m.ModelType = 'E'
AND Status = 1
JOIN OptMod..GO_EdgeModelDisplayParameters emdp
ON emdp.EdgeModelID = em.EdgeModelID
AND emdp.ParameterName = 'NewEdge32 Screening'
LEFT JOIN OptMod..GO_EdgeModelDisplayParameters emdn
ON emdn.EdgeModelID = em.EdgeModelID
AND emdn.ParameterName = 'NewEdge32 Display Name'
LEFT JOIN OptMod..GO_ModelUniverses mu
ON em.EdgeModelID = mu.ModelID
LEFT JOIN OptMod..vUniverses univ
ON mu.UniverseID = univ.UniverseID
LEFT JOIN OptMod..GO_EdgeModelDisplayParameters emdp_perm
ON emdp_perm.EdgeModelID = em.EdgeModelID
AND emdp_perm.ParameterName = 'NewEdge32 Permissions'
WHERE em.EdgeModelID = em.RelatedTotalEdgeModelID
Thanks in advance!!!
sqlnovice123
View 1 Replies
View Related
Oct 14, 2015
LeaveEntitlementID PeriodID LeaveType EmployeeID NumberOfDays
1 1 Annual 1 10
2 1 Annual 1 10
3 1 Sick 2 10
4 2 Sick 2 10
5 2 Sick 2 10
I have the above table (LeaveEntitlement) which has the above columns.
What I want to sum the column NumberOfDays based on EmployeeID, LeaveType and PeriodID columns as of LeaveTypeNumberOfDays.
For example sum(NumberOfDays) where PeriodID=1 and EmployeeID=1 and LeaveType=Annual
The result should be shown in new column name AnnualLeave (20)
sum(NumberOfDays) where PeriodID=1 and EmployeeID=1 and LeaveType=Sick
The result should be shown in new column name SickLeave (10)
Same all leave Types
The table should be shown as the below after executing the query
LeaveEntitlementID PeriodID EmployeeID AnnualLeave SickLeave
1 1 1 20 0
2 1 2 0 10
3 2 2 0 20
is it possible in sql server
View 8 Replies
View Related
Aug 14, 2015
I have the following database structure
Stock Depth41 Depth12 Depth34
AAA 1 2 1
BBB 2 2 4
How can I show Each Depth column as seperate row
AAA 1
AAA 2
AAA 1 as follows
View 3 Replies
View Related
Nov 25, 2014
I want to filter out the duplicate rows based on three columns. I got this quick query from Microsoft site to filter out the duplicate rows, but I am getting the result that filters out the non-duplicate one too. Below is the query
;With Temp as (
SELECT row_number() over (partition by [id],[p_date], order by [id],[p_date],) as Row,
[code]...
In the above case id is null, but in some rows id is not null . The above is obviously not duplicate.
View 8 Replies
View Related
Dec 17, 2007
I have a table that holds a number of offers made to a orginization for placements at a lecture. what im wanting to do is have each of the rows for a orginization repeated so that the names of people attending can be put into the database.
The first table would looks something like this:
id___|__orginization_| lecture | offers
1 | orga | lec1 | 5
2 | orgb | lec1 | 3
3 | orga | lec2 | 3
the result im looking to get is something like this where the name of the attendess would be inputed in an application.
id | orginization | lecture | nameofattende
1 | orga | lec1 | j. blog
2 | orga | lec1 | s. smith
3 | orga | lec1 | h. samual
4 | orga | lec1 | j. sams
5 | orga | lec1 | b.j. james
6 | orgb | lec1 | m. curry
7 | orgb | lec1 | k. murry
8 | orgb | lec1 | g. hansen
Can anyone help with this
cheers
colin
View 4 Replies
View Related
Sep 23, 2015
Here's the my structure and data as follows
>
SELECT tranno ,mrno medrecno ,createdon,createdat,no_of_trans nooftrans
FROM mytab WHERE mrno = 'MR1514' and tranno = 1111
ORDER BY no_of_trans
tranno medrecno
createdon createdat
nooftrans
[Code] ...
Now requirement is : -
tranno medrecno
createdon createdat
nooftrans tranno medrecno
createdon createdat
nooftrans
[Code] ....
View 4 Replies
View Related
Apr 30, 2015
I have a query that gives me a result with a column value for example 4.
I now want to repeat this row 4 times with a new column that calculated from 1 - 4.
Or when column value is 3 I want to repeat row 3 times with new column name 1-3
View 7 Replies
View Related
Oct 1, 2015
The objective is to identify orders where an order fee has been applied incorrectly. I have multiple orders per customer, my table contains an orderID and a customerID. Currently if the customer places additional orders before the previous orders have been closed/cancelled, then additional fees are being applied.
Let's say I'm comparing order #1 to order #2. I need to identify these rows where the following is true:-
The CustID is the same.
Order #2 has a more recent order date.
Order #2 has a FeeDate Before the CancelledDate of Order #1 (or Order #1 has no cancellation date).
So in the table the orderID:2835692 of CustID: 24643 has a valid order fee. But all the subsequently placed orders have fees which were applied before the first order was cancelled and so I want to update the FeeInvalid column with a 'Y'. The first fee will always be valid.
I think I understand why the code I am trying doesn't achieve the result I want but I can't figure out how to write it correctly. Below is one example of code I've tried and also code to create the table and insert some test data.
update t1
SET FeeInvalid = 'Y'
FROM MockData t1 Join MockData t2 on t1.CustID = t2.CustID
WHERE t1.CustID = t2.CustID
AND t2.OrderDate > t1.OrderDate
AND t2.FeeDate > t1.CancelledDate
CREATE TABLE [dbo].[MockData](
[OrderID] [float] NULL,
[code]....
View 4 Replies
View Related
Apr 18, 2014
--------------------------------------------------
SalesOrder-ItemName-Price-Category
-------------------------------------------------
01-Camera-100-Electronic
01-Memory-4GB-10-Memory
01-Battery-5-Battery
02-Keyboad-10-Accessories
02-Mouse-5-Accessories
03-CPU-300-Hardware
03-Motherboad-400-Hardware
From above rows i would like to select rows based on one distinct column SalesOrder, i want output like below.
-----------------------------------
SalesOrder-ItemName-Price-Category
-----------------------------------
01-Camera-100-Electronic
02-Keyboad-10-Accessories
03-CPU-300-Hardware
CREATE TABLE Table1 (SalesOrder varchar(10), ItemName VARCHAR(100), Price INT, Category VARCHAR(100))
[Code] ......
View 2 Replies
View Related
Feb 27, 2008
Hello,
I need to concatenate a column from multiple rows into a single column in a new table.
How can I do this?
SID NAME PGROUP
------------------------------------------------------------
3467602 CLOTHINGACTIVE
3467602 CLOTHINGDANCE
3467602 CLOTHINGLWR
Need to have
SID NAME PGROUP
------------------------------------------------------------
34676 02 CLOTHING ACTIVE , DANCE, LWR
THANK YOU
View 10 Replies
View Related
Nov 18, 2007
Hellow Folks.
Here is the Original Data in my single SQL 2005 Table:
Department: Sells:
1 Meat
1 Rice
1 Orange
2 Orange
2 Apple
3 Pears
The Data I would like read separated by Semi-colon:
Department: Sells:
1 Meat;Rice;Orange
2 Orange;Apple
3 Pears
I would like to read my data via SP or VStudio 2005 Page . Any help will be appreciated. Thanks..
View 2 Replies
View Related
Aug 5, 2015
declare @var varchar(8000)
set @var='Name1~50~20~50@Name2~25.5~50~63@Name3~30~80~43@Name4~60~80~23'
---------------------
Create table #tmp(id int identity(1,1),Name varchar(20),Value1 float,Value2 float,Value3 float)
Insert into #tmp (Name,Value1,Value2,Value3)
Values ('Name1',50,20,50 ), ('Name2',25.5,50,63 ), ('Name3',30,80,43 ), ('Name4',60,80,23)
select * from #tmp
I want to convert to @var to same like #tmp table ..
"@" - delimiter goes to rows
"~" - delimiter goes to columns
View 6 Replies
View Related
Oct 21, 2013
I have to select rows from a table
if the first 2 characters of a 12 char column are
'GB'
Select BFKEYC from table where
I have a hokey way of doing it but it looks embarrassing:
BFKEYC GT 'GA9999999999'
AND BFKEYC LT 'GC'
View 8 Replies
View Related
Nov 30, 2007
I have a results table that was created from many different sources in SSIS. I have done calculations and created derived columns in it. I am trying to figure out if there is a way to remove duplicate rows from this table without first writing it to a temp sql table and then parsing through it to remove them.
each row has a like key in a column - I would like to remove like rows keeping specific columns in the resulting row based on the data in this key field.
Ideas?
Thanks,
Ad.
View 7 Replies
View Related
Aug 7, 2007
Hello all. I hope someone can offer me some help. I'm trying to construct a SQL statement that will be run on a Dataset that I have. The trick is that there are many conditions that can apply. I'll describe my situation:
I have about 1700 records in a datatable titled "AISC_Shapes_Table" with 49 columns. What I would like to do is allow the user of my VB application to 'create' a custom query (i.e. advanced search). For now, I'll just discuss two columns; The Section Label titled "AISC_MANUAL_LABEL" and the Weight column "W". The data appears in the following manner:
(AISC_Shapes_Table)
AISC_MANUAL_LABEL W
W44x300 300
W42x200 200
(and so on)
WT22x150 150
WT21x100 100
(and so on)
MT12.5x12.4 12.4
MT12x10 10
(etc.)
I have a listbox which users can select MULTIPLE "Manual Labels" or shapes. They then select a property (W for weight, in this case) and a limitation (greater than a value, less than a value, or between two values). From all this, I create a custom Query string or filter to apply to my BindingSource.Filter method. However I have to use the % wildcard to deal with exceptions. If the user only wants W shapes, I use "...LIKE 'W%'" and "...NOT LIKE 'WT%" to be sure to select ONLY W shapes and no WT's. The problems arises, however, when the user wants multiple shapes in general. If I want to select all the "AISC_MANUAL_LABEL" values with W <= 40, I can't do it. An example of a statement I tried to use to select WT% Labels and MT% labels with weight (W)<=100 is:
Code SnippetSELECT AISC_MANUAL_LABEL, W
FROM AISC_Shape_Table
WHERE (W <= 100) AND ((AISC_MANUAL_LABEL LIKE 'MT%') AND (AISC_MANUAL_LABEL LIKE 'WT%'))
It returns a NULL value to me, which i know is NOT because no such values exist. So, I further investigated and tried to use a subquery seeing if IN, ANY, or ALL would work, but to no avail. Can anyone offer up any suggestions? I know that if I can get an example of ONE of them to work, then I'll easily be able to apply it to all of my cases. Otherwise, am I just going about this the hard way or is it even possible? Please, ANY suggestions will help. Thank you in advance.
Regards,
Steve G.
View 4 Replies
View Related
May 15, 2015
I have a query running and returning 3 columns, user name, e-mail and device name
SELECT DISTINCT v_R_User.Full_User_Name0 AS 'User full Name', v_R_User.Mail0 AS 'E-Mail', _RES_COLL_DEV00144.Name
FROM v_R_System INNER JOIN
v_R_User ON v_R_System.User_Name0 = v_R_User.User_Name0 INNER JOIN
_RES_COLL_DEV00144 ON v_R_User.User_Name0 = _RES_COLL_DEV00144.UserName INNER JOIN
v_GS_COMPUTER_SYSTEM ON v_R_System.ResourceID = v_GS_COMPUTER_SYSTEM.ResourceID
Where v_R_User.Mail0 <> ''
ORDER BY 'User Full Name'
From here I would like to generate an e-mail to each user (like mail merge) to each user in the table an include their machine name. I can do it with PS, but rather have it run directly from SQL. Is it possible?
View 9 Replies
View Related
May 20, 2008
i want to split the value of one column into multiple rows. based on comp capacity. pl help me in writing query
Actual table
Product IdProductQtyCompCapacity
1 8000 5000
2 10000 5000
4000
4000
Resultant table
Product IdProductQtyCompCapacity
2 50005000
2 50005000
1 40004000
140004000
View 6 Replies
View Related
