Need To Add Field In This Stored Procedure

Oct 27, 2006

Hello Everyone,

I have the following stored procedure:


set ANSI_NULLS OFF
set QUOTED_IDENTIFIER OFF
GO


ALTER PROCEDURE [dbo].[usp_MLSReport_LRR]
@UserId int,
@ReportGroupId int = null,
@BranchTranType varchar(50) = null,
@BranchDivision varchar(50) = null,
@BranchRegion varchar(50) = null,
@BranchNbr int = null,
@BranchSatId varchar(1) = null,
@BeginDate datetime,
@EndDate datetime
AS

-- DECLARE @UserId int,
-- @ReportGroupId int,
-- @BranchTranType varchar(50),
-- @BranchDivision varchar(50),
-- @BranchRegion varchar(50),
-- @BranchNbr int,
-- @BranchSatId varchar(1),
-- @BeginDate datetime,
-- @EndDate datetime
--
-- SET @UserId = 4602
-- --SET @ReportGroupId = 46
-- SET @BranchDivision = 'DENVER DIRECT'
-- SET @BeginDate = '4/27/05'
-- SET @EndDate = '9/30/05'

SET NOCOUNT ON

DECLARE @UseCTD int

SET @UseCTD = CASE WHEN @BranchTranType IS NULL
AND @BranchDivision IS NULL
AND @BranchRegion IS NULL
AND @BranchNbr IS NULL
AND @BranchSatId IS NULL THEN 1 ELSE 0 END




SELECT DISTINCT
L.ProviderId,
L.OriginalProviderId,
S.SourceCode,
SG.SourceGroupCode,
SGDescription=SG.Description,
RG.ReportGroupId ,
ReportGroupDesc=RG.Description ,
L.VendorId,
VEN.VendorName,
B2.BranchTranType,
B2.BranchDivision,
B2.BranchRegion,
B2.BranchName,
L.BranchNbr,
L.BranchSatId ,
Branch=CONVERT(varchar, L.BranchNbr) + L.BranchSatId,
LoNbr = ISNULL(L.LONbr, 9999),
LoName = ISNULL(LO.LOName, ' - NOT ASSIGNED -') ,
LoEmploymentStatus = LO.EmploymentStatus,
LeadCount = 1,
Completed = CASE WHEN L.RecCompleted = 'C' THEN 1 ELSE 0 END,
InCompleted = CASE WHEN L.RecCompleted = 'I' THEN 1 ELSE 0 END ,
NoContact = CASE WHEN LD.Disposition = 16 THEN 1 ELSE 0 END,
Contacted = CASE WHEN LD.Disposition <> 16 THEN 1 ELSE 0 END,
Pending = CASE WHEN LD.Disposition IS NULL THEN 1 ELSE 0 END,
NoSale = CASE WHEN LD.Disposition <> 1 THEN 1 ELSE 0 END,
Apps1003 = CASE WHEN LD.Disposition = 1 THEN 1 ELSE 0 END ,
AppraisalsOrdered = CASE WHEN ISNULL(T3._@8034, 0) = 0 THEN 0 ELSE 1 END,
ClosedApps= CASE WHEN (@UseCTD = 1 AND SMT2._H0770 IS NOT NULL) OR SMT._H0770 IS NOT NULL THEN 1 ELSE 0 END,
LoanVolume = CASE WHEN @UseCTD = 1 AND LD.CTDLoanNbr IS NOT NULL THEN ISNULL(T1._@2026, 0) ELSE ISNULL(T1._@2026, 0) END,
OrigLoanBalance = CASE WHEN @UseCTD = 1 AND LD.CTDLoanNbr IS NOT NULL THEN ISNULL(SMT2._H0360, 0) ELSE ISNULL(SMT._H0360, 0) END,
Revenue = CASE WHEN @UseCTD = 1 AND LD.CTDLoanNbr IS NOT NULL THEN ISNULL(SMT2.calc_TotalIncomeDollars, 0) ELSE ISNULL(SMT.calc_TotalIncomeDollars, 0) END,
MarketingCost = CASE WHEN L.VendorId IN (59, 60) THEN 0 ELSE ISNULL(S.Cost, 0) END,
CAM.LeadTypeId,
SMT.calc_TotalIncomeDollars,
SP.SubjectAddrState,
SP.SubjectSCF,
S.LeadFormLabel
FROM MLS..tbl_MLS_Leads L (NOLOCK)
INNER JOIN MLS..tbl_MLS_LeadDispositions LD (NOLOCK) ON (LD.ProviderId = L.ProviderId)
INNER JOIN MLS..tbl_MLS_Branches B1 (NOLOCK) ON (B1.BranchNbr = L.BranchNbr AND B1.BranchSatId = L.BranchSatId)
INNER JOIN MLS..vw_MLS_AUCodeSecurity AU (NOLOCK) ON (B1.AUCode = AU.AUCode AND AU.UserId = @UserId)
INNER JOIN CHEC..SMT_Branches B2 (NOLOCK) ON (B1.BranchNbr = B2.BranchNbr)
INNER JOIN MLS..tbl_MLS_SubjectProperties SP (NOLOCK) ON (SP.ProviderId = L.ProviderId)
LEFT JOIN CHEC..TMRPT100 T1 (NOLOCK) ON (T1._@LOAN# = LD.TMOLoanNbr)
LEFT JOIN CHEC..TMRPT300 T3 ON (T1._@LOAN# = T3.R3LOAN)
LEFT JOIN CHEC..SMT3 SMT (NOLOCK) ON (SMT._H0010 = LD.TMOLoanNbr)
LEFT JOIN CHEC..SMT3 SMT2 (NOLOCK) ON (SMT2._H0010 = LD.CTDLoanNbr)
LEFT JOIN CHEC..SRVDSR SRV (NOLOCK) ON (SMT._H0010 = SRV._LOAN_NUM)
LEFT JOIN CHEC..SRVDSR SRV2 (NOLOCK) ON (SMT._H0010 = SRV2._LOAN_NUM)
LEFT JOIN MLS..tbl_MLS_MarketingSources S (NOLOCK) ON (S.SourceId = L.SourceId)
LEFT JOIN tbl_MLS_MarketingSourceGroups SG (NOLOCK) ON (S.SourceGroupId = SG.SourceGroupId)
LEFT JOIN tbl_MLS_ReportGroups RG (NOLOCK) ON (RG.ReportGroupID = SG.ReportGroupID)
LEFT JOIN (
SELECT
LONbr,
LOName = FullName,
EmploymentStatus,
ReHireDate,
HireDate,
TermDate

FROM MLS..vw_MLS_UsersWithLONbrs (NOLOCK)
) LO ON (LO.LONbr = L.LONbr)
LEFT JOIN MLS..tbl_MLS_Campaigns CAM (NOLOCK) ON (CAM.CampaignId = SG.CampaignId)
LEFT JOIN MLS..tbl_MLS_Vendors VEN (NOLOCK) ON (VEN.VendorId = L.VendorId)

WHERE L.DateReceived BETWEEN @BeginDate AND @EndDate + ' 23:59:59'
AND (CASE WHEN @ReportGroupId IS NULL THEN 1 WHEN @ReportGroupId = RG.ReportGroupId THEN 1 ELSE 0 END) = 1
AND (CASE WHEN @BranchTranType IS NULL THEN 1 WHEN @BranchTranType = B2.BranchTranType THEN 1 ELSE 0 END) = 1
AND (CASE WHEN @BranchDivision IS NULL THEN 1 WHEN @BranchDivision = B2.BranchDivision THEN 1 ELSE 0 END) = 1
AND (CASE WHEN @BranchRegion IS NULL THEN 1 WHEN @BranchRegion = B2.BranchRegion THEN 1 ELSE 0 END) = 1
AND (CASE WHEN @BranchNbr IS NULL THEN 1 WHEN @BranchNbr = L.BranchNbr THEN 1 ELSE 0 END) = 1
AND (CASE WHEN @BranchSatId IS NULL THEN 1 WHEN @BranchSatId = L.BranchSatId THEN 1 ELSE 0 END) = 1
AND L.ProviderId = L.OriginalProviderId
AND L.VendorId NOT IN (59, 60, 131) -- Exclude Turndown or Ghost leads
AND L.Deleted = 0


I need to add the field DateReceived from the following view:

dbo.vw_MLS_Leads

How should I code this?

As always thanks for the great answers and suggestions in advance.

Have a great day!



Kurt

View 8 Replies


ADVERTISEMENT

Stored Procedure Returns -1 For A Bit Field

Apr 15, 2008

Hello,I have a stored procedure: -- Get an individual league match by IDALTER PROCEDURE [dbo].[mb_League_GetLeagueMatchByID](   @LeagueMatchID  int)ASSET NOCOUNT ONSELECT * FROM mb_LeagueMatch WHERE mb_LeagueMatch.LeagueMatchID = @LeagueMatchIDThe mb_LeagueMatch table has a column named IsActive that is a bit datatype.The value for all rows is set to true (in database explorer in visual studio 2005).When I execute the above stored procedure I always get -1 (I'm guessing that means null) as a result for IsActive if it was true and 0 when false (as expected).However, when I run a query on the database for the same parameter, I get the expected 1 as the value for IsActive.Has anyone seen this before?Thanks,Howard

View 4 Replies View Related

Sum Or Count Value Of Field In Stored Procedure

Apr 19, 2005

How can i create a stored procedure that count or sum value of field
e.g.

               
f1      f2    
f3    f4    f5
 record     1      
1      2     
3     1
 
and get answer  like this   1=4  - 2=1 -  3=1

 

View 1 Replies View Related

Update A Field With A Stored Procedure

Dec 13, 2004

I need to update a field with the code below, is it possible to do this with a table join? The Query Analyzer is giving me an error at "Join".

An example:
(ManufSerNo is a field in table ASSETS,
Status is a field in table HISTORY)

GO

CREATE PROCEDURE sp_ChngeAssetStatus

@ManufSerNochar(10),
@Statusvarchar(1)

AS

UPDATE HISTORY
SET Status = @Status
JOIN ASSETS
ON HISTORY.AssetID = ASSETS.AssetID
WHERE ManufSerNo = @ManufSerNo
--ELSE
--RAISERROR ('Sorry, but the Asset ID specified does not exist. Record not updated.', 10 , 1)

GO

View 2 Replies View Related

Field List From A Stored Procedure

Apr 16, 2004

I am writing a utility that creates Java code to access a database. I am looking for a way to get a list of fields and types that are returned by an sproc. Is there any easy way to get this from the master? Do you need to parse the SQL? This list would be like what Visual Studio.NET shows, or interdev if I remember correctly.

Thanks,

Larry

View 5 Replies View Related

Stored Procedure And A New Database Field

Dec 28, 2007

I am very new to stored procedures and fairly new to SQL in general. I have a stored procedure that looks like this:


CREATE PROCEDURE sp_UpdateProductsTable
@prodName varchar(50),
@prodManufacturer varchar(50),
@prodShortDescrip text,
@prodLongDescrip text,
@prodCatId int,
@prodPrice varchar(6),
@prodSortOrder int,
@prodActive int,
@prodId int
AS
if( @prodId <> 0 )
begin
update Products set
Name = @prodName,
Manufacturer = @prodManufacturer,
ShortDescription = @prodShortDescrip,
LongDescription = @prodLongDescrip,
CategoryID = @prodCatId,
Price = @prodPrice,
SortOrder = @prodSortOrder,
Active = @prodActive
where ID = @prodId;

select ID as prodId from Products where ID = @prodId

end
if( @prodId = 0 )
begin
insert into Products ( Name, Manufacturer, ShortDescription, LongDescription, Price, CategoryID, SortOrder, Active )
values( @prodName, @prodManufacturer, @prodShortDescrip, @prodLongDescrip, @prodPrice, @prodCatId, @prodSortOrder, @prodActive );

SELECT SCOPE_IDENTITY() AS prodId
end

GO



I have recently added two new fields to the database that I need the stored procedure to act upon, but adding them into the above code does not work. I read somewhere that this would happen with new fields, but I do not know how to fix this issue. Could someone point me in the right direction and help me out? I also have some other tables and SP's that I need to update, but its the same issue, I think so fixing this one should help me out across the board.

Thanks in advance for your help.

View 8 Replies View Related

Field Not Being Updated Within Stored Procedure

Jul 23, 2005

I have this stored procedure that loops through a table and updates acouple of fields. For some reason one of the fields is not beingupdated. If I run the same code from query analyzer, it works fine.Let me know if anyone can figure out why @lastscandate would ever beNULL. If it is null it should be equal to @maildate. The senerio thatseems to fail is when no records are returned from the select statementto fill in @lastscandate. This should then active the next ifstatement and set the @lastscandate equal to the @maildate. MailDateis always filled in in the database and LastScanDate will be NULL.Thanks for your help.DECLARE c1 CURSOR LOCAL FORSELECT m.id, m.acctno, m.ordid, m.cycle FROM master m WITH (nolock)WHERE m.printstatus IN ('ST', 'ML') AND (m.batchid IS NULL OR m.batchid= 0) AND (m.maildate ='' OR m.maildate IS NULL)AND NOT EXISTS(SELECT * FROM packagemaster p WITH (nolock)WHERE m.acctno = p.acctno AND m.ordid = p.ordid AND m.cycle = p.cycleAND p.status NOT IN ('BM', 'PM'))OPEN c1FETCH FROM c1 INTO @mid, @acctno, @ordid, @cycleWHILE @@fetch_status = 0BEGIN--Get MailDate from Manifest - if NULL then use GetDateset @maildate = NULLSELECT @maildate = MAX(whenmailed) FROM manifest WITH (nolock)WHERE acctno = @acctno AND ordid = @ordid AND cycle = @cycleif @maildate is NULLset @maildate = getdate()--Get Last Scan Date from Transactions - if NULL then use MailDateset @lastscandate = NULLselect @lastscandate=max(actiondate) from transactions whereacctno=@acctno and ordid=@ordid and cycle=@cycle and actionid=303if @lastscandate is NULLset @lastscandate = @maildateBEGIN TRANSACTIONUPDATE master SET printstatus = 'ML', maildate = @maildate,lastscandate=@lastscandateWHERE id = @midINSERT INTO transactions (initials, actionid, machinelogin, acctno,ordid, cycle, program) VALUES ('RLT', 55, 'Mars', @acctno, @ordid,@cycle, 'Update Mail Dates')COMMIT TRANSACTIONFETCH NEXT FROM c1 INTO @mid, @acctno, @ordid, @cycleENDCLOSE c1

View 1 Replies View Related

How Can I Format A Datetime Field In A Stored Procedure

Dec 14, 2006

How can I format a datetime field in a stored procedure to return just the date in MM/DD/YYYY format?

View 13 Replies View Related

Multiple Filtering On The Same Field Using A Stored Procedure

Apr 24, 2007

Hello,
I am looking at writing a SP without much success which enables multiple filtering on one field. Something like below:
Input field: Product Description
So if the user enters: "Large Drill"  OR "Drill Large" the same resultset will be returned.
SELECT * FROM products WHERE products.prod_desc contains both "Large" AND "Drill"
I guess there'll need to be a nested Select and loop to parse the space separated input field.
Any pointers would be appreciated.
Thank you
Lee
 
 
 

View 2 Replies View Related

Adding Field Or Stored Procedure To MSDE

Jan 7, 2004

Is there a way to add a field or a stored procedure to a server running MSDE? Like a script on the command line or?? how can this be done.

Thank you,

View 5 Replies View Related

Changing Field Values In A Stored Procedure

May 4, 2003

Here's the deal:

I import a flat file from a legacy system, and then convert it into a single table. That works simply enough.

Then I have a SP that querys that table using a parameter for an accountID. My business tier calls that SP and returns the results to the calling tier (my web application). Easy enough...

Now for the question. The people who created the flat file (written in COBOL) decided to use "codes" to represent data. So, for instance, if I'm looking for the account plan, I can expect to see characters like ], or [, or +, etc... These characters have a special meaning, like:

] = Plan A
[ = Plan B
+ = Plan C, and so on.

Currently, the web application displays those characters, but I want it to display the actual plan name. Is there a way that when I execute the SP, the SP could pull the necessary records, and whenever it encounters a certain "plan" character, it could convert it into a "readable" name? Say that it sees that the plan_type field has a value of "]" for twenty records, so it converts those twenty records' plan_type value from "]" into "Plan A"? I'm not sure if I can do that, but I want to at least evaluate the option if I can.

I've evaluated other options, like using a CASE statement in my code, but I shot that down quickly...for obvious reasons. I don't wanna be changing my web application or business tier each time these guys update a plan name, or add a new one, delete an existing one, etc...

I've also thought about creating a dictionary table than contains the plan's code and its name, and then just INNER JOIN the first table with the dict table. This would keep my SP very simple (it's very straight-forward right now, and I like that). That way, if a plan name is ever changed, or a new one is added, I simply update the dict table using a simple query. However, if my SP is doing the conversion, I could just as easily update the SP.

Either of these methods would work for me, and I *do* know how to do the latter (dict table). However, there are quite a few other fields that I may have to do this for. I believe when I left for the day on Friday, my last count was 14 fields total that needed translation. That would mean 14 different dict tables! That could certainly affect my SP performance with all those INNER JOINS!

Therefore, I'm certainly interested in figuring out if it's possible to do the former method (SP), and then I shall decide which method is best for my situation.

Feel free to include your thoughts on which process you think is better as well. I'm really riding the fence with this one. However, if I can't find out how to change field values in my SP, then obviously I'll make a decision very quickly...

Thanks in advance.

View 3 Replies View Related

Sorting Stored Procedure By Text Field

Mar 19, 2001

I want to sort a stored procedure based on a variable passed to it... what is the easiest way to do this? Here's an example of what I want to do:

sp_select_thing 10, 'thing_name', 'asc'

It would run the query then somehow evaluate parameters 2 and 3 to be placed in the ORDER BY clause. I'm not sure if they should be quoted as strings or not, I don't have an idea how to pass a "reference to a variable" as a parameter to a stored procedure... or even if such a thing is possible

Thanks!

View 1 Replies View Related

Stored Procedure To Fill A Date Field

Oct 27, 1998

I need to write a sp to fill a date field, if another field in another table is true. need the date to reflect todays date(the date the field was marked true). I know this is an easy one but I am over thinking it. please help.

View 2 Replies View Related

Copy Ntext Field In Stored Procedure

Oct 24, 2007

Hello everybody,

i have a problem with copying (read it from one row and set it to another) a ntext field in a stored procedure. I know how
to get a pointer to the data and how to read from it.

But i want to copy the whole data.

Does anybody know how to do that?

Thanks in advance

A.Gempp


-------------------------------
I'm using SQL Server 2000

View 4 Replies View Related

Stored Procedure To Update A Display Order Field.

Dec 20, 2006

I am creating an app that allows the user to change the order of the list by changing a value in a displayOrder field. I'd love a button for move up /move down move bottom/move top and then pass that parameter to a stored procedure and it would renumber all the items in the list.
Example
ItemID  description   DisplayOrder  Action0           item 1           0                     Moveup/move down1           item 2           1                     Moveup/move down2           item 3           2                     Moveup/move down
So clicking on move up on item 2 would pass and itemID, Action and perhaps a list id to a stored proc and it would renumber the list. I'm assuming it would be done with a loop but I've never tried that.. suggestions?
Thanks - Mark

View 1 Replies View Related

Changing Field In A Stored Procedure To Match Name In A Form

May 15, 2008

If I have a column named "Login" in a SQL Table (I am sharing with another application) that I am using a stored procedure to acquire the information from, how can I trranspose its name to match code already written in a Web App to get the data.
 There is a web app already created that has the followig code to get the data from the database
Dim strSQL ast string = "UsersSelectCommand"
intLoginID = objDataReader("LoginID")
 
My stored procedure is the following:
 CREATE PROCEDURE UsersSelectCommand/* (  @parameter1 datatype = default value,  @parameter2 datatype OUTPUT )*/AS Select Lastname, FirstName, Login from Users Order by LastName
GO
 The stored procedure will return "Login" instead of "LoginID" that I am wanting. How can I modify the Stored Procedure to change the LoginID to Login.
 
 
 

View 2 Replies View Related

How Can I Insert Id Field Automatic In Table By Stored Procedure

Sep 25, 2005

i have a  student table     and i created a  stored procedure   to insert a new student in this  table  but  student_id field  wich  i put it as  primary key got error  because  allready  record has same value  .how i can know  the last row's student_id value  and  input a new valid value    in one stored procedure thanks

View 1 Replies View Related

Stored Procedure - Field Not In Aggregate Function Or Group By

Nov 29, 2011

best solution for this stored procedure query.I'm getting the following error:

Column 'dbo.Applicants.submitted' is invalid in the select list because it is not contained in an aggregate function and there is no GROUP BY clause. Here is my select query:

Code:
SELECT DISTINCT DATENAME(MONTH, submitted) AS mon, MAX(submitted) AS SubmitDate
FROM dbo.Applicants
WHERE ((CASE WHEN MONTH(submitted) > 8 THEN YEAR(submitted) + 1 ELSE YEAR(submitted) END) = @AcYr)
ORDER BY SubmitDate

The submitted field is a date field.I don't want to add the submitted field to Group By as I want to group by month not date.Is there any solution to avoid grouping by date?

View 3 Replies View Related

Stored Procedure Make String From Table Field

Jul 20, 2005

Hallo !I have a Table with a column "ordernumber"ordernumberA12A45A77A88Is it possible to create a stored procedure which makes a string of these column ?Result: string = ('A12','A45','A77','A88')Thanks !aaapaul

View 3 Replies View Related

Adding Field To Stored Procedure For Crystal Reports

Jul 20, 2005

Hello:I have a stored procedure for generating our invoices in CrystalReports. I have added a new field to the SP, but when I try to add thefield to my Crystal Report invoice, the field isn't available in thelist. However, if I create a new, blank report using the same storedprocedure as the datasource, the field is available. I've seeminglytried every iteration of "Verify Database" to no avail.The obvious answer would be to simply drop the sp from my existingreport and then re-add it. However, if you do this, all your fields onthe report are dropped.Any ideas?Thanks,Scott

View 1 Replies View Related

I Need This To Be Done Using Only Single Stored Procedure For Binding Field Value To DropDownBox And For Adding Income. Plz Tell Me How To Do This?

May 22, 2008

 
My task is to add income by taking few variables from webpage. I had take User ID(From database), Field value by selecting it from DropDownBox( Which value is once again taken from database), Income Description, Date, Amount . I had completed this task successfully by binding DropDownBox to database by query string and added income using stored procedure as below.
 
  I need this to be done using only single Stored Procedure for binding Field Value to DropDownBox  and for adding income. Plz tell me how to do this?
ASPX.CS file
protected void Page_Load(object sender, EventArgs e)
    {
        SqlConnection con = null;
       
            con = DataBaseConnection.GetConnection();
            DataSet ds = new DataSet();
            SqlDataAdapter da = new SqlDataAdapter("select PA_IFName from PA_IncomeFields where PA_UID=@PA_UID", con);
            da.SelectCommand.Parameters.Add("@PA_UID", SqlDbType.Int).Value = (int)Session["PA_UID"];
            da.Fill(ds);
          
            IFDdl.DataSource = ds;
        IFDdl.DataTextField= ds.Tables[0].Columns[0].ToString();
        IFDdl.DataValueField = ds.Tables[0].Columns[0].ToString();
            IFDdl.DataBind();
       
       
    }
    protected void IncAddBtn_Click(object sender, EventArgs e)
    {
        SqlConnection con = null;
        try
        {
            con = DataBaseConnection.GetConnection();
 
            SqlCommand cmd = new SqlCommand("AddIncome", con);
            cmd.CommandType = CommandType.StoredProcedure;
            //SqlCommand cmd = new SqlCommand("",con);
            //cmd.CommandText = "insert into PA_Income values(@PA_UID,@PA_IFName,@PA_IDesc,@PA_IDate,@PA_IAmt)";
           
            cmd.Parameters.Add("PA_UID", SqlDbType.Int).Value = (int)Session["PA_UID"];
            cmd.Parameters.Add("@PA_IFName", SqlDbType.VarChar, 10).Value = IFDdl.SelectedValue;
            cmd.Parameters.Add("@PA_IDesc", SqlDbType.VarChar, 50).Value = IFDescTB.Text;
            cmd.Parameters.Add("@PA_IDate", SqlDbType.DateTime).Value = Convert.ToDateTime(IFDateTB.Text);
            cmd.Parameters.Add("@PA_IAmt", SqlDbType.Money).Value = Convert.ToDecimal(IFAmtTB.Text);
 
            cmd.ExecuteNonQuery();
            IFLabelMsg.Text = "Income Added Successfully!";
 
        } // end of try
        catch (Exception ex)
        {
            IFLabelMsg.Text = "Error : " + ex.Message;
        }
        finally
        {
            con.Close();
        }
    }
 
Stored Procedure
ALTER PROCEDURE dbo.AddIncome (@PA_UID int,@PA_IFName varchar(10),@PA_IDesc varchar(50),@PA_IDate datetime,@PA_IAmt money)
      /*
      (
      @parameter1 int = 5,
      @parameter2 datatype OUTPUT
      )
      */
AS
 
 
/*SET NOCOUNT ON*/
 
     
      insert into PA_Income values(@PA_UID,@PA_IFName,@PA_IDesc,@PA_IDate,@PA_IAmt)
 
ASPX File
<%@ Page Language="C#" MasterPageFile="~/MasterPage.master" AutoEventWireup="true" CodeFile="AddIncome.aspx.cs" Inherits="AddIncome" Title="Untitled Page" %>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
 
<h2>
        Add Income </h2>
    <br />
        <table>
            <tr>
                <td>
                    Select Income Field</td>
                <td>
                    <asp:DropDownList ID="IFDdl" runat="server" Width="247px"   >
                    </asp:DropDownList>
                    <a href="addincomefield.aspx">Add Income Field</a>
                   
                    </td>
                   
            </tr>
            <tr>
                <td>
                    Enter Income Amount
                </td>
                <td>
                    <asp:TextBox ID="IFAmtTB" runat="server" Width="96px"></asp:TextBox>
                    Date &nbsp;<asp:TextBox ID="IFDateTB" runat="server" Width="93px"></asp:TextBox>(MM/DD/YY)</td>
            </tr>
            <tr>
                <td>
                    Enter Income Description
                </td>
                <td>
                    <asp:TextBox ID="IFDescTB" runat="server" Width="239px"></asp:TextBox></td>
            </tr>
        </table>
   <br />
    <asp:Button ID="IncAddBtn" runat="server"  Text="Add Income" OnClick="IncAddBtn_Click"  /><br />
    <br />
    <asp:Label ID="IFLabelMsg" runat="server"></asp:Label>
</asp:Content>
 
 
 
  I need this to be done using only single Stored Procedure for binding Field Value to DropDownBox  and for adding income. Plz tell me how to do this?
 

View 3 Replies View Related

Calling A Stored Procedure Inside Another Stored Procedure (or Nested Stored Procedures)

Nov 1, 2007

Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly.  For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') 
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). 
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
 

View 1 Replies View Related

Calling A Stored Procedure From ADO.NET 2.0-VB 2005 Express: Working With SELECT Statements In The Stored Procedure-4 Errors?

Mar 3, 2008

Hi all,

I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):

(1) /////--spTopSixAnalytes.sql--///

USE ssmsExpressDB

GO

CREATE Procedure [dbo].[spTopSixAnalytes]

AS

SET ROWCOUNT 6

SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName

FROM LabTests

ORDER BY LabTests.Result DESC

GO


(2) /////--spTopSixAnalytesEXEC.sql--//////////////


USE ssmsExpressDB

GO
EXEC spTopSixAnalytes
GO

I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////

Public Class Form1

Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click

Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")

Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)

sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure

'Pass the name of the DataSet through the overloaded contructor

'of the DataSet class.

Dim dataSet As DataSet ("ssmsExpressDB")

sqlConnection.Open()

sqlDataAdapter.Fill(DataSet)

sqlConnection.Close()

End Sub

End Class
///////////////////////////////////////////////////////////////////////////////////////////

I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)

Please help and advise.

Thanks in advance,
Scott Chang

More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.




View 11 Replies View Related

T-SQL (SS2K8) :: One Stored Procedure Return Data (select Statement) Into Another Stored Procedure

Nov 14, 2014

I am new to work on Sql server,

I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.

Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.

View 1 Replies View Related

SQL Server 2014 :: Embed Parameter In Name Of Stored Procedure Called From Within Another Stored Procedure?

Jan 29, 2015

I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?

CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],

[Code] ....

View 9 Replies View Related

Connect To Oracle Stored Procedure From SQL Server Stored Procedure...and Vice Versa.

Sep 19, 2006

I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.

How do I do that? Articles, code samples, etc???

View 1 Replies View Related

Creating A Stored Procedure That Will Summarize Data In A Table Into A Table Reflecting Period Data Using An Array Type Field

Sep 20, 2007

I am attempting to create a stored procedure that will launch at report runtime to summarize data in a table into a table that will reflect period data using an array type field. I know how to execute one line but I am not sure how to run the script so that it not only summarizes the data below but also creates and drops the table.

Any help would be greatly appreciated.

Current Table

Project | Task | Category | Fiscal Year | Fiscal Month | Total Hours
---------------------------------------------------------------------------------------------------------
Proj 1 | Task 1 | Cat 1 | 2007 | 01 | 40
Proj 1 | Task 1 | Cat 2 | 2007 | 02 | 20
Proj 1 | Task 1 | Cat 3 | 2007 | 03 | 35
Proj 1 | Task 1 | Cat 1 | 2008 | 01 | 40
Proj 1 | Task 1 | Cat 2 | 2008 | 02 | 40
Proj 1 | Task 1 | Cat 3 | 2008 | 03 | 40

Proposed Table

Project | Task | Category | Fiscal Month 01 | Fiscal Month 02 | Fiscal Month 03 | Fiscal Year
---------------------------------------------------------------------------------------------------------------------------------------------------
Proj 1 | Task 1 | Cat 1 | 40 | 0 | 0 | 2007
Proj 1 | Task 1 | Cat 2 | 0 | 20 | 0 | 2007Proj 1 | Task 1 | Cat 3 | 0 | 0 | 35 | 2007
Proj 1 | Task 1 | Cat 1 | 40 | 0 | 0 | 2008

Proj 1 | Task 1 | Cat 2 | 0 | 40 | 0 | 2008
Proj 1 | Task 1 | Cat 3 | 0 | 0 | 40 | 2008

Thanks,
Mike Misera

View 6 Replies View Related

Grab IDENTITY From Called Stored Procedure For Use In Second Stored Procedure In ASP.NET Page

Dec 28, 2005

I have a sub that passes values from my form to my stored procedure.  The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page.  Here's where I'm stuck:    Public Sub InsertOrder()        Conn.Open()        cmd = New SqlCommand("Add_NewOrder", Conn)        cmd.CommandType = CommandType.StoredProcedure        ' pass customer info to stored proc        cmd.Parameters.Add("@FirstName", txtFName.Text)        cmd.Parameters.Add("@LastName", txtLName.Text)        cmd.Parameters.Add("@AddressLine1", txtStreet.Text)        cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue)        cmd.Parameters.Add("@Zip", intZip.Text)        cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text)        cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text)        cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text)        cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text)        cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text)        ' pass order info to stored proc        cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue)        cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue)        cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue)        'Session.Add("FirstName", txtFName.Text)        cmd.ExecuteNonQuery()        cmd = New SqlCommand("Add_EntreeItems", Conn)        cmd.CommandType = CommandType.StoredProcedure        cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc)   <-------------------------        Dim li As ListItem        Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar)        For Each li In chbxl_entrees.Items            If li.Selected Then                p.Value = li.Value                cmd.ExecuteNonQuery()            End If        Next        Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder)  and pass that to my second stored procedure (Add_EntreeItems)

View 9 Replies View Related

SQL Server 2012 :: Executing Dynamic Stored Procedure From A Stored Procedure?

Sep 26, 2014

I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure

at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT

I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT

View 3 Replies View Related

Parsing A Field Into Another Field Using Stored Proc

Sep 28, 2005

Hi,I am running SQLServer2000 with ASP.NET. I have 3 fields:DATE_TIME (date time 8)DATEF ()TIMEF ()...when my default.aspx page is called, i need to execute a stored procedure that will parse my DATE_TIME field by the space in between, then update my DATEF and TIMEF fields with the appropriatevalues. NOw i have 2 fields to query from instead of 1. How would i write a SQL expression to do this? and what datatypes should the DATEF and TIMEF fields be?thxj

View 3 Replies View Related

System Stored Procedure Call From Within My Database Stored Procedure

Mar 28, 2007

I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.

How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?

Thanks in advance

View 9 Replies View Related

Ad Hoc Query Vs Stored Procedure Performance Vs DTS Execution Of Stored Procedure

Jan 23, 2008



Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio

What could explain this?

Obviously,

All three scenarios are executed against the same database and hit the exact same tables and indices.

Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).

The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes

View 1 Replies View Related

User 'Unknown User' Could Not Execute Stored Procedure - Debugging Stored Procedure Using Visual Studio .net

Sep 13, 2007

Hi all,



I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.



Whenever I tried to right click stored procedure and select step into store procedure> i get following error



"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"



I am not sure what needs to be done on sql server side



We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.

Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?



Please advise..

Thank You

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved