I am using reporting services 2012, Can we make visibility of report parameter dynamic, ie can we make parameter visible or hide on certain condition or its visibility depends on other parameters Is this feature available in any other updated version of ssrs?
Hello, I tie up columns with parameters.what ever column are selected only those column should be displayed. Now my parameter are string data type. I write this expression in column-->propertyvisibility--> hide-->Expression
in the Visibility property for the relevant column, but it doesn't make any difference. The column still shows up even if the Rate parameter is set to Null or zero. I only want the column to show if the user enters a value in the Rate parameter which is greater than zero.
I have a handful of reports that are currently used by sales reps, and I'm trying to make them available to their regional VP's, and coporate users (executives and administrative staff that support Sales nationwide).
Currently, the reports take the UserID and resolve it to show the information that is only appropriate for that specific rep.
What I would like to do is have the parameter section at the top of the report be displayed for higher level users, so they could select an individual sales rep from a drop-down. (Ideally, the RVP's would only be able to select from reps in their region, but the corporate users would be able to select any rep.) The problem is, I don't want any of the sales reps to be able to select a rep other than themselves, for obvious reasons.
Is there a way to have the parameter section hidden/displayed dynamically, based on the UserID, so that users other than reps would have the ability to enter the desired rep name, but reps would not?
I have a Multivalue parameter with 4 available values and have 4 columns in the report that correspond to each of these values.I apply column visibility to each of the 4 columns with the following expression (the number changes for each column
What I want to do is that if I select a KPI and the Column value is NULL then to hide the row.Obviously if you select multiple KPIs and only 1 of the columns has null value then I wouldn't want the Row hidden.
I'd like to hide/show a table based on selected parameters. In the current setup I have a matrix and two tables underneath that need to be displayed from time to time. First of I use a multi-value parameter called "Lieferart". Depending on the parameter I have set the visibility of the two tables with the following expression:
=iif(Parameters!lieferart.Value(0) like "Nagel%", False, True)
This expression doesn't work though, any ideas??? I am also unsure about what I have to do If multiple values from the parameter list are selected as Parameters!lieferart.value(0) doesn't necessarily need to have a label like "Nagel" included...
My goal: I want to hide some text or table from inside the email message body. I don't want to attach a file with a table neither I want copy/paste it. I'd like to put that Excel table inside the message but the table is quite big.
Before I used Lotus Notes and it had the option to fold of hide some text from user. User could open when it wants but it will not take the space.
how do i hide an attributes member value in all the reports where my cube is exposed as data source. Example : Lets say i have dimension called Product. Product
Name column Key column Product A 0 Product B 1 Product C 2
Now i need to create mdx query which will fetch member values except 0 key column value so that member values except 0 Key would be loaded in the parameter list. What is the best query so that i will run in to any performance issues. Is there any cube level setting i can do so that i will be doing one time job ?
Can i use Key() function to compare something like Key([Product].[Product Name]) >0 in the mdx query ot would Except() function would help?
I have requirement where first I need to show only one report parameter. Based on user selection I need to prompt or show the user another report parameter.
Say suppose I have 3 parameters. User selects first value in first parameter I should not show the other 2 parameters. If user selects second value in first parameter I should show second parameter and hide third parameter. There is no relationship between these 2 parameters except user selection. Similarly if user third value in first parameter then I should show third parameter and hide second parameter.
Is this possible? I can not see any Visible property for report parameters.
I have 2 tables in my report, a multi value parameter (tp_title) is passed to the report. I am trying to hide the first tablix with this expression in the visiblity option of the tablix properties.
=IIF(Parameters!tp_Title.value = "Financial Years" or Parameters!tp_Title.value="ALL", False,True )
I get the error: The Hidden expression for the tablix ‘Tablix1’ contains an error: Overload resolution failed because no Public '=' can be called with these arguments: 'Public Shared Operator =(a As String, b As String) As Boolean': Argument matching parameter 'a' cannot convert from 'Object()' to 'String'.
When I render the report. How the tablix can be made invisible based on the parameter?
Can we do the auto hide of parameter window in ssrs as soon as user select the input and click on view report and once the data comes, that parameter window should hide automatically.
I have the below procedure with an output parameter '@rowcount'. Now My issue is how to access the value of '@rowcount' in my ASP.Net application using C#. I have also pasted my C# code which I am using . create procedure mypro1(@id varchar(10),@rowcount int output) as select * from canid where id like @id /* @@ROWCOUNT returns the number of rows that are affected by the last statement. */ select @rowcount=@@rowcount -------------------------------------------------- C# code to retrieve the output parameter valuecmd = new SqlCommand("mypro1", cn); cmd.CommandType = CommandType.StoredProcedure;cmd.Parameters.AddWithValue("@id", TextBox1.Text).Direction=ParameterDirection.Input; Parameter cout = new Parameter("@rowcount",SqlDbType.Int);cout.Direction = ParameterDirection.Output; cmd.Parameters.Add(cout); can some body assist me in the above code whether its right or what needs to be added to get the output parameter value.
I need to return a resultset consisting of database errors from SQL Server stored procedure's CATCH CLAUSE but stuck with it. Do I need to use cursors to return resultset and if so, then what is the type declaration for the OUTPUT parameter in my .NET application? I tried 'Object' and 'Variant' but did not work.
I also tried the simple way just using a SELECT statement to return and it works with one stored procedure but not with another as thus in my CATCH CLAUSE:
Code: while (@I <= @count) begin BEGIN TRY -- delete all previous rows inserted in @customerRow for previous counts @I delete from @customerRow -- this is inserting the current row that we want to save in database insert into @customerRow
[Code] .....
This does not work when select is made in the CATCH block, ie it returns no rows to my .NET application:
Code: begin catch IF @@TranCount > 0 or XACT_STATE()= -1 ROLLBACK TRANSACTION; DECLARE @ErrorMessage NVARCHAR(4000); DECLARE @ErrorSeverity INT; DECLARE @ErrorState INT; DECLARE @ErrorLine INT; SELECT @ErrorMessage = ERROR_MESSAGE();
[Code] ....
Just to summarize the code and where the problem is. The code that works uses a SELECT * from temporary table not in the CATCH block and this works while the one that uses the same SELECT * from temporary table inside the CATCH does not return anything! Strange. The Wrong one is used in another Stored procedure from the Right one btw so am wondering why the same code does not work in those two different situations.
I'm trying to rertieve specific RS 2005 report by passing WebApp control value (this.VCtrlNo.Text) to "CV Report" - name of my report with the following scripts.
1) No Action - when clicked. AutoPostBack is set and properly initialized.
2) This just opened the default page instead of specific report. <a href="http://localhost/Reports/Pages/Report.aspx?ItemPath=%2fReports+Folder%2fCV+Report&rc=Render&vctrlno=10-0000037", target="_blank">Open CV Report </a>
Where "Reports" is the reportmanager, vctrlno is the parameter name (properly set) and obviously I want to open a new page.
I would be very thankful to anyone who can lead to make this work.
you see these are the requirements.. 1. there is a text file named "Loan" 2. i must create a program using ASP.net wherein the text file can be imported in the system. 3. after importing, i must save the whole text file in a database.
my questions are:
1. what code can i do to open up a text file? 2. how can i save the text file into a database? 3. is there any way that i could import the file and view its content in my application? 4. after viewing, how can i save the text file as a text file in a database?
I need your help guys. Am devolving a windows application by c#. I have problem of insert Arabic text to sql express 2005. I always get ???? instead of the Arabic letters. I change the collation of the database field to windows collation and choose Arabic but still I get the same problem.
Does anyone know how to use 'sp_xml_preparedocument' with 'xmltext' parameter that is text data type?
On BOL,sp_xml_preparedocument argument definition, 'xmltext' is a text(char,nchar,varchar,nvarchar,text or ntext)parameter.
If declare 'xmltext' as 'varchar' data type varible, then sp_xml_preparedocument works perfect, but my xmltext more than 8000 characters, I have to use text data type.
I want to grab what is in textbox1, put in string, and send as a queryto bring up report with only textbox1 occurances in table. How do I dothat please?Thanks,Trint
How do I create a CLR function that takes a "text" sql datatype in VB.NET?
I need to write a CLR function which takes a full text parameter and return the word count of the full text. The full text can be pretty big.
If I specify the parameter with string datatype, when I view it in SQL management studio, it says "nvarchar(4000)" and it truncates the full text that's being passed in. Same thing happens if I specify it as SqlString. Ideally, I would like it to be translated into text datatype in sql.
I have one date parameter in my report. The user will be able to manually enter or use the calendar control. In the case of entering manually, is there any way to validate the input string? How can we prevent users from entering alphabets?
Also, is there any way to reduce the length of the parameter textbox. Can you please help?
I have a Full Text query that works fine when structured as follows: SELECT First_Name, Middle_Name, Last_Name, Hire_Date, City, Department, Phone_Ext, title, Fax, Secretary_Name, Attorney_Name, Secy_Ext, Home_Phone, Desk_Location, Law_School, Undergraduate_School, Languages, E_mail, CMS_ID, WEB_ID, Notary FROM dbo.PhotoDir WHERE CONTAINS (*, 'Jones') ORDER BY Last_Name, First_Name
However, I would like to replace "Jones" with a parameter, @LName for example. However, I can't figure out the syntax. I tried the following: WHERE CONTAINS (*, @LName) but received the following error: The @LName SQL construct or statement is not supported. Is there a way to put a parameter in this type of query? Thanks in advance.
I am creating this OLAP matrix report and I tried to speed up the time needed for the OLAP dataset by limiting the number of columns in the dataset. I have two parameters, year and month, for the dataset which are set to multi-select values. Year and month are not assigned to the dataset as for the reason mentioned above (performance). However I do want to show the year and month in the matrix report. Can I use the parameter value when assigning the grouping for the year and month like "Parameters!DateCalendarYear.Value" etc and the same to the text box in the matrix report?
I tried it to the report and it returned with an error saying "The Group expression used in grouping 'matrix_....' returned a data type that is not valid"
I have a report that runs transcripts for people. I have a date parameter setup along with last and first name. The date parameter field is used to specify what year (ex. 1/1/2006 - 12/31/2006) to pull the information for.
Now..I have a text box at the bottom (Footer) of my report that says something to the affect of "Official transcripts for 2006". There will be times when I have to run the report using a different year other then "2006" in the date parameter field. How do I have the text at the bottom change to reflect the year I'm reporting on? If I use dates say in 2004 I need the text at the bottom to reflect that year and not 2006. Can this be accomplished?
I have a report that pulls data for the following date parameters:
DECLARE @STARTDATE datetime, @ENDDATE datetime SET @STARTDATE = GETDATE()-3 SET @ENDDATE = GETDATE() Select * from tablename where reportdate between @STARTDATE and @ENDDATE
This query works fine. I wanted to show the parameters chosen in a text box in the report so the user knows the date range the report was run. I tried using the following: "Discharge Date between " & Parameters!STARTDATE.Value & " and " & Parameters!ENDDATE.Value but I am getting a forward dependancy error. I have also tried setting a default value but can not get the correct code to subtract three days from Now()