MS SQL Server :: Oracle Password Disappears From The Connection Manager

Connection Manager And Password

Aug 13, 2007

In connection manager in ssis, I am able to choose 'Microsoft OLE DB Provider for Oralce' and
provide server name, username/ password. The test connection results is successful. and I check 'Save Password', however, when I try to run the package it keep getting an error:

ora-01017 - invalid username/ password.

it seem si can not save the pasword.. what should i do to resolve this problem

View 1 Replies View Related

Connection Manager To Informix Won't Keep Password

Feb 29, 2008

I am trying to use SSIS to read a flat file into an Informix table.

When I create a OLEDB connection manager, I can connect to the DB. When I do test connection I get successful back. But when I close the manager & come back, the PW is gone. I have tried unselecting Blank Password and clicking the Save Password button.

When I try to get a list of tables in the SQL destination object, it won't work and gripes about the missing PW

What am I missing?

Thanks JPS

View 1 Replies View Related

FTP Connection Manager: Set FTP Password Using A Variable

Nov 2, 2005

Hi,

View 33 Replies View Related

OLE DB Connection Manager Will Not Save Password

Feb 14, 2007

I'm stuck with a very annoying problem - any help would be greatly appreciated.

I created a package using Business Intelligence Project. The package reads from a Flat File source and saves to a SQL Server table.

The package has a Data Source for the database connection. In this I have opted to save the password.

When I run the package in VS on my machine it works fine.

I then deployed the package to our SQL 2005 database server using the Deployment Utility. It then appeared in the MSDB section.

I then tested the package ran from my machine using Management Studio and all was fine.

However, if I try to run the package from the database server itself I run into problems. Specifically, the log gives me the following error:
"The AcquireConnection method call to the connection manager "<My Database>" failed with error code 0xC0202009"
....and further down I get:
"Error: an OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source "Microsoft SQL Native Client" Hresult 0x80040E4D Description: "Login failed for user 'sa'.".

What seems to be happening is the password is not being saved in the connection string. Sure enough, if I look at the Connection Managers section of the Execute Package Utility in Management Studio, then my database connection manager has only a User ID specified and no "pwd=". If I add "pwd=<my password>" to this connection string here then the package works.

How do I get this password to be remembered by the Package?

Incidentally, I have also tried writing a VB.NET program to call the package programmatically. Using this, I have tried to set the connection string of my Data Source in the code to try to get round the problem above. However, even after this I still find the only machine the package runs on is mine, and everywhere else it fails to connect.

Please help! Thanks in advance.

Richard F

View 8 Replies View Related

How To Extract Username And Password From Ftp Connection Manager?

Jul 17, 2006

Hi,

I would like to know how to programmatically extract username and password from an ftp connection manager. Thanks.

I got this code but I want to get the values of every available property in a connection manager. Please help. Thanks!

For Each connMgr In myConns
Dim connProperties As DtsProperties = connMgr.Properties
Dim connProp As DtsProperty
For Each connProp In connProperties
MsgBox(connProp.Name)
Next
Next

View 7 Replies View Related

Integration Services :: FTP Connection Manager Not Retaining Password?

Aug 28, 2015

I have an SSIS package that uses an FTP connection manager. When running the package in BIDS, it runs fine and maintains the password for the remote ftp site's user account.
Once I deploy the package and attempt to run it, it fails with the following error:

Started: 4:06:15 PM
Error: 2015-08-27 16:06:20.09
   Code: 0xC001602A
   Source: Export and FTP New Jobs Connection manager "FTP Connection Manager"
   Description: An error occurred in the requested FTP operation. Detailed error description: The password was not allowed
End Error
Error: 2015-08-27 16:06:20.09
   Code: 0xC002918F
   Source: FTP Jobs Listing to Concur FTP Task
   Description: Unable to connect to FTP server using "FTP Connection Manager".
End Error
DTExec: The package execution returned DTSER_FAILURE (1).

I've tried Don't Save Sensitive With Password and that still fails.

Does the FTP connection manager just not retain passwords outside of BIDS?

View 3 Replies View Related

Oracle Connection Manager Configuration Help

Apr 14, 2006

Hi, I dont know if I should post this question here, or on oracle forums, but here goes ...

I made a simple package that performs 2 Excecute SQL Tasks, one task does a select query on a SQL Server DB Table, the other task does a select query on an Oracle DB Table.

The package runs fine in BIDS when debugging, but when I deployed the package to a file system and added it to an sql server agent Job, it all went wrong ...

I tried the ms oledb dataprovider (ole db) for oracle but also the oracleclient data provider (ado.net) but the package always fails.

The error messages in the logfile are these:

event
OnError

computer
ComputerName

operator
NT AUTHORITYSYSTEM

source
Execute SQL Task PLSQL

sourceid
{B29C4FC9-3345-4657-8680-F770B8C2E136}

executionid
{7312A7EC-2555-4268-BB29-38659507BADD}

starttime
14/04/2006 16:40

endtime
14/04/2006 16:40

datacode
-1073573396

databytes
0x

message
Failed to acquire connection "aaa.bbb.oracleClient". Connection may not be configured correctly or you may not have the right permissions on this connection.

the OnError logrow for the package itself says almost the same.

Now my question is: What do I need to configure to get it all working? I think I need to configure the oracle db no? What should I configure? ...

View 6 Replies View Related

Integration Services :: The Connection Manager Seems To (forget) The Password In SSIS

Jun 22, 2015

I create a connection to an OLE db source and use SQL Server authorization and save the password, the connection manager seems to "forget" the password. That is, when I click the 'save password' check box, and do a test connection, it connects fine. But as soon as I close that connection window, and reopen it, the password box is empty, and the 'save password' box is still checked.

While using the connection manager name in the SSIS component (say script task) the connection is failing . As a workaround, the whole connection string has been put in a variable and used that variable in the SCRIPT task.

Is it a bug or some other property need to be set to use ConnectionManager Name .

Using BIDS 2008

View 3 Replies View Related

Integration Services :: Saving Connection Manager Password Permanently

May 13, 2015

User A creates the SSIS Package and provides the password for the connection manager for a task (for OLE DB source) with SQL authentication.

When User B tries to run the SSIS package, the error is thrown as : The package may be damaged.

On typing the password again inside the connection manager, the execution occurs successfully. Is there any workaround to save the password permamanently for the connection manager rather than each user entering it in order to run the package ?

View 4 Replies View Related

Connection Manager Reuse For Oracle And SQL Databases

May 2, 2008

I'm trying to implement a configurable way of executing a group of SQL statements using either an Oracle or SQL database as the source for the data.

I'm currently building a connection string with a Script Task and then assigning it to a package variable so that it can be used by a connection manager but this only works with a SQL OLEDB connection.

I'm holding all the connection details in a database table, hence the need for the scripting but would it be possible to extend the task to reuse a single connection manager by changing it's properties?

View 7 Replies View Related

How To Create Connection Manager For Oracle DB Using ODBC?

Jan 17, 2008

Hi,
I want to import data from Oracle database programmatically using ODBC connection manager. I was able to import data by creating an ODBC DSN and then using it BIDS with ADO.NET connection using ODBC data provider for Oracle. Now I want to do the same programmatically. How should I create a connection manager? I tried using code below

ConnectionManager cmOracle = this.package.Connections.Add("ADO.NET: ODBC");

cmOracle.Name = "OracleSourceConnection";

cmOracle.ConnectionString = "Dsn=MyDSN;uid=MyID;";

But I get an error when acquiring connection
ErrorCode=-1071611874

The connection manager "__" is an incorrect type. The type required is "__". The type available to the component is "__".
Which one of the connection managers given by Microsoft here should be used?
http://msdn2.microsoft.com/en-us/library/ms136093.aspx
Has anyone come across similar scenario?

Thanks

View 3 Replies View Related

Oracle Data Source Connection Problem Using Report Manager

Jan 2, 2007

I have an issue when using Report Manager for viewing reports that use a certain Oracle data source. When viewing the reports in Report Designer the reports display without problems. But when trying to display the reports with Report Manager, after deploying the reports to the Report Server, I now get the following error message:

blablabla....ORA-12705: invalid or unknown NLS parameter value specified

For testing purposes I am running Report Designer, Report Server and Report Manager locally on a PC with Windows XP. I am using Reporting Services 2005, IIS 6, Visual Studio 2005, an Oracle 9.x client and an Oracle 9.x (not 100% sure) database that is hosted on a remote server.

Earlier I got an error message that stated "ORA-12154: TNS: could not resolve the connect identifier specified". Access rights to some Oracle folders for the Network service account did the trick here but then I got the "NLS parameter" error message. What I have tried to do is removing the NLS_LANG register variable and also modified the value of the variable so that it matches the value of the NLS_LANG variable on the server that hosts the Oracle database, but none of them have worked. Any ideas?

Maybe this is an issue that is more appropriate in an Oracle forum but what the heck..the problem could reside in Reporting Services..

Thanks, Stefan

View 1 Replies View Related

The AcquireConnection Method Call To The Connection Manager Excel Connection Manager Failed With Error Code 0xC0202009

Mar 24, 2008

I am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database.
I am getting following error while I execute it through BI studio's execute button.

Please help.

- Sachin

View 2 Replies View Related

The AcquireConnection Method Call To The Connection Manager Excel Connection Manager Failed With Error Code 0xC0202009

Mar 11, 2008

I have deployed my packages into Sql Server and I am using Configuration File. As my Data Source is Excel, I have changed the connection string during deployment with Server Path. But I am getting the following errors. Actually the File Exist in Path. May I know What is cause of the issue? Do I need to give any permission to execute the package.

SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.

component "Excel Source Service Contract Upload" (1) failed validation and returned error code 0xC020801C.

One or more component failed validation.

There were errors during task validation.

DTS_E_OLEDBERROR, Error Code: 0x80004005 Source: "MS JET DB Engine" Description : Path is not valid

View 27 Replies View Related

Error: The AcquireConnection Method Call To The Connection Manager Excel Connection Manager Failed With Error Code 0xC0202009.

Dec 27, 2007

Hi,

I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :

I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?

Here is the error code i am getting:

[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.

Appreciate your time and patience !!

Thanks

View 3 Replies View Related

The Connection Type OLEDB Specified For Connection Manager Is Not Recognized As A Valid Connection Manager Type - Why?

Mar 17, 2008

Greetings,

I have an SSIS package that I need to modify. It was developed in Visual Studio 2005 and runs faithfully in production on SQL Server 2005. Suddenly, I can't open the package on my own workstation. I see a big red "X" image and a message stating "Microsoft Visual Studio is unable to load this document." The real reason the document can't be loaded appears to be:

Error loading DataWarehouseLoader.dtsx: The connection type "OLEDB" specified for connection manager "Warehouse Logging OLE DB" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.

Does anyone know what causes this and what I can do? The package has been in production for 9 months and I've never seen this problem before.

Thanks,
BCB

View 10 Replies View Related

Oracle Connection Fail With Microsoft OLEDB Provider For Oracle MSDAORA.1

Feb 22, 2006

Hello,

On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.

I use one or the other according to my needs.

In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.

Almost everything works except Microsoft OLEDB provider for Oracle.

ssis packages on the test machine will return an error

Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.

Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.

[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.

An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".

I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.

Does anyone could point me to the right direction to solve this issue?

Thanks,

Philippe

View 17 Replies View Related

Failed OLEDB Connection: Cannot Aquire Connection From Connection Manager

Feb 6, 2008

I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel data source will fail with an oledb connection error.
Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.

Thanks,

John T

View 3 Replies View Related

Connection Strings, Trusted-connection VS Username-password, SQL Server 2005 Express

Mar 9, 2007

All --
Please help.
I have some questions about connection strings.

BACKGROUND...

Note that I am using the "SQL Native Client OLE DB Provider", SQL Sever 2005 Express, ASP.NET, C#.NET, and VS.NET 2005.
Note that I do not want to use the "Attach a database file" type of connection string.
Note that I am using the site http://www.ConnectionStrings.com as a reference.
Note that this "Standard security" connection string...<add name="LocalSqlServer" connectionString="Server=MYTESTOFFICESERVERS;Database=MyDatabase;Uid=MyDatabaseUser;Pwd=MyDatabasePassword;" />...does not work and causes the following run-time error...A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
Note that this "Trusted connection" connection string...<add name="LocalSqlServer" connectionString="Server=MYTESTOFFICESERVERS;Database=MyDatabase;Trusted_Connection=yes;" />...works but is less-than ideal because it uses a Trusted Connection rather than a Username/Password combination.

QUESTIONS...
(A) What exactly does the error in Item 4 mean?
(B) Do 4 and 5 imply that one must use a Trusted_Connection for all SQL Server 2005 Express connection strings when the database does not reside in the web application's App_Data folder or use a "Attach a database file" type of connection string?
(C) Are there any alternatives?
(D) What do you suggest?

Please advise.
Thank you.
-- Mark Kamoski

View 1 Replies View Related

Losing Oracle User Name And Password

Mar 17, 2006

I have written a simple SQL Server 2005 package to pull some data from Oracle (using ODBC) and pumping it into SQL Server. When I run it from the server in debug mode in VS it works fine. When I schedule the job it errors out with "ora-01005: null password given; logon denied." The password is there. Has anyone experienced this? Is there a security setting somewhere preventing me from saving passwords? Is there a work around? Thanks.

View 2 Replies View Related

SSIS Package Does Not Remember Password (OLE DB Connection + ADO.Net Connection)

Mar 29, 2007

Both the OLE DB Connection and ADO.Net Connection in SSIS Package does not remember password.

Im connecting to a SQL Server 2000 box using its sa password as test.

The SSIS package runs fine when you first set up the connection in bids

The bottom line is that SSIS keeps forgetting the password I feed into
the two Connections that I'm using. I double-click a connection,
type the password in, check "Save my password" and hit "OK" but the
password disappears from there whenever I run the package or
double-click the connection again.

is there any known workaround for this issue as I would like to schedule my SSIS package using a SSIS Step in a SQL Server 2005 Agent job.

the only thing I found when googling this error was link below but the workaround described here is a little harsh

http://www.developersdex.com/sql/message.asp?p=1921&ID=%3C1146409399.447345.7470@j73g2000cwa.googlegroups.com%3E

thanks in advance

Dave

the box SSIS is running on is Windows 2003 Server Standard Edition latest service pack

SQL Server 2005 (no service packs )

View 14 Replies View Related

Integration Services :: Oracle Ole Provider And Password

Dec 3, 2015

Oracle linked server. If I query Oracle in my packages using SQL it tooks age if I use an OLE DB Oracle connection it takes minutes, so I started to develop my packages using the OLE DB Oracle. The point is that in order to connect the Oracle db I must set up a password (Oracle requires a password but if I use directly SQL it doesn't need any password). This password changes every month so I do need to set up the password for...if I can come up with another solution? I don't know, maybe a unique connection...just set up the password only once.

View 2 Replies View Related

Remembering Username And Password In Report Manager.

Mar 14, 2008

Is there any way to Remembering the username and password on report manager?
I have set the credentials to "Credentials supplied by the user running the report" ...
cant use the Windows credentials for some reasons...

View 4 Replies View Related

SSIS Project Failing To Run Even Though I Verified Remote Sybase Connection Via Connection Manager

Apr 7, 2008

When running the project in debug mode or non-debug mode, I get the following error from MS Visual Studio:

TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package [Connection manager "SYBASE_CONNECTION"]: The connection manager failed to defect from the transaction.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------

Any ideas???

View 8 Replies View Related

Integration Services :: Unable To Get Managed Connection From Connection Manager Runtime

Apr 15, 2015

I use SQL Server 2012 and visual studio 2010.I created SSIS Project with task "Execute Package". Control flow view as: Package1 (execute package) -> Package2 (data flow).Data flow in Package2 view as: ADO.NET source -> ADO.NET destination.

When I started Package2, it's work. I havn't errors.But when I started Package 1 I have error "Unable to get managed connection from the Connection Manager runtime". In execution log I see that ADO.NET source produced this error on verification stage. Package failed on verification stage, not on execution stage.Why when I started Package 2 it work, but when I started Package1 (and Package1 started Package2) it failed?

View 14 Replies View Related

The AcquireConnection Method Call To The Connection Manager &&<Connection Name&&> Failed With Error Code 0xC020200

Feb 14, 2008

Hi All,
I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job:
The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009.

while I running the SSIS package on BI environment, I am getting the following error:
[Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".

I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful.

I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence.

I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem.

If anyone can help me it will be great. or it is a bug in SSIS?

Thanks.
Jena

View 5 Replies View Related

Rounding Error: Between Flat File Connection Manager Source && OLE DB Connection Destination (SQL Server 2005)

Jun 22, 2006

I have a Rounding error: Between flat file connection manager Source & OLE DB Connection Destination (SQL Server 2005) in my Dataflow.

File looks like this lets call column names Col A,B,C,D

70410000 RD1 1223631.92 196042.42
70329000 ICD 11025.84 3353.88
71167300 COL 104270.59 24676.96

flat file connection manager settings: first row Column names then Advanced tab Col A float , Col B float , Col C string ,Col D float ,

OLE DB Connection Destination (SQL Server 2005)

CREATE TABLE [dbo].[PT_CUST_ABR](

[PARTY_NO] [float] NULL,

[PARTY_NAME] [varchar](75) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,

[TELECOMABR] [float] NULL,

[GENIABR] [float] NULL,

Problem: ColA (Source) Rounding error to PARTY_NO (Destination)
I have a field of text of in a flat file that the flat file connection manager Source picks up correctly ��70000893�?
However when it gets the OLE DB Connection Destination the data has changed to 70000896. That��s before its even Written to the database.
The only clue that something is wrong in the middle is the great Data viewer shows the number as 7.000009E+07
Other clues looking at the data it appears there is a rounding error on only the number that dont end in 00
ColA (Source) PARTY_NO (Destination)
71167300 71167296
70329000 70329000
70410000 70410000
Any ideas people?
Thanks in advance
Dave

View 3 Replies View Related

Login Failed;0xC0202009; Cannot Acquire Connection From Connection Manager

Dec 17, 2007

hi all,
i got the error, when i run my package after deploy into the server machine;
i can able to run that package in my local machine, if i deploy it to the server or some remote machine, its not running, and rises error messages, that says cant accquire connection from the connection manager;

the problem might be with the login name and password; i could not see any password in any of my config file, or connection manager while running the package.
how to resolve this problem?? please help me!

View 6 Replies View Related

Failed To Decrypt Protected XML Node DTS:Password With Oracle As Source File

Oct 18, 2007

Hello all, I have read many topics about this error but it doesn't fix my packages in my particular case. The problem is that I access to a database in Oracle using the Ole DB provider for Oracle

I get that the mentioned error when I try to run a job from the agent.

1 - When I set "DontSaveSensitive" to ProtectionLevel I get this error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E4D Description: "ORA-01017: username/password no valid".
This is normal because the connection needs a password.

2 - When I set "EncryptSensitiveWithUserKey" to ProtectionLevel I get the mentioned error: "Failed to decrypt protected XML node "DTSassword" ..

The other options to ProtectionLevel doesn't work neither. I have tried to write the password in the field required...

I have tried many possibilities but nothing new, it doesn't work.

Does anybody have this error with Oracle as source file ???

Thank you .

View 4 Replies View Related

SQL Server 2008 :: Connection Manager Not Using Connection String Value

Feb 19, 2015

I have a child package where the ConnectionString property of a Connection Manager is set by a Parent Package Variable Configuration. I set up a script task that brings up a message box with the value of the ConnectionString property right before the dataflow task.

MessageBox.Show(Dts.Connections["CPU_*"].ConnectionString.ToString());When I run the parent package, the message box shows that the connection string is changing with every iteration, but in the dataflow it always draws the data from the same source.

The connection manager is an ADO.Net type, RetainSameConnection is set to False, and I've been researching this for days.

(Update 2/23/2015): To make this stranger, when I look at the diagnostic logs, they tell me that when the new connections are being opened they are using the new connection strings.

View 2 Replies View Related

Connection Manager Not Showing New Connection From Data Source...

Mar 30, 2007

Hello,

I've created a SSIS Solution and have created Data Sources. I have two packages. One was created before the Data Sources, and one was created after. The package that was created after is using connections from the Data Sources. I want to change the package before the Data Soruces were created to use them, but when I right click in the Connection Managers pane "New Connection From Data Source.." is not an option.

Did I not add it to the Solution properly?

How do I get it to show?

Did I not refresh something?

Please provide the how if you figure it out.

Thanks

View 4 Replies View Related

Cannot Acquire A Managed Connection From The Run-time Connection Manager

Jul 26, 2006

How would one go about using an ODBC connection with SSIS. I'm trying to ETL some Sybase ASE data, but I get the error when I try it:

"cannot acquire a managed connection from the run-time connection manager"

This wasn't any help:

http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=169777&SiteID=1

View 1 Replies View Related