Warning: Process Being Freed While Holding Dataserver Semaphore
I understand that this is a bug. And that it is supposed to be fixed in
service pack 4.
However, has anyone experienced or figured out how to get rid of this message?
Thanks for your help.
Hi, has anyone gotten the error "semaphore timeout" when trying to doa backup to disk? The disk is a logical partition. There are twodrives, c: and d:. Backing up to c: is fine. However, backing up tod: produces the error below. Thanks in advance for any help.Here is the command : backup database model to TestM22003-07-19 09:21:35.77 spid51 Error: 15457, Severity: 0, State: 12003-07-19 09:21:35.77 spid51 Configuration option 'show advancedoptions' changed from 1 to 1. Run the RECONFIGURE statement toinstall..2003-07-19 09:21:35.83 spid51 Using 'xplog70.dll' version'2000.80.194' to execute extended stored procedure 'xp_msver'.2003-07-19 09:22:42.28 spid51 BackupMedium::ReportIoError: writefailure on backup device 'D:Full'. Operating system error 121(Thesemaphore timeout period has expired.).2003-07-19 09:22:42.28 spid51 Internal I/O request 0x2B150AE8: Op:Write, pBuffer: 0x2B250000, Size: 458752, Position: 72192, UMS:Internal: 0x103, InternalHigh: 0x0, Offset: 0x11A00, OffsetHigh: 0x0,m_buf: 0x2B250000, m_len: 458752, m_actualBytes: 0, m_errcode: 121,BackupFile: D:Full
View 4 Replies View RelatedHi
I need Help
I use batch code like below model:
Project1 in vb.net
call spA1
call spA2
....
Project2 in vb.net
call spB1
call spB2
....
spA1 & spA2 & spB1 & spB2 are stored procedures in SQL Server 2005
I need a solution like semaphore:
when project1 is run and process in spA1 & spA2, then project2 can't access resource of spB1 & spB2.
when project 1 is done then project 2 is run
these projects should work like semaphore method.
I want to use semaphore method in this case.
using SPs: 1. sp_getapplock & 2. sp_releaseapplock
please give me another solution for safely processing.
thanks alot
Good Morning,
I'm hoping that someone can help me. I have a SQL 2005 SSIS package that will run Friday mornings to empty/load a table with data from another database. On Friday evenings I'll need to run another package, but want to make sure the table load completed prior to launch. For this I planned to use a file watcher task, however I cannot for the life of me figure out how to output a 'done' semaphore, from the morning job, to a networked drive.
A file system task will not work because there is not a 'create file' option. I do not have an existing file that I can rename either.
I tried an execute process task running cmd.exe with the following argument:
Code Snippetecho Done> \NetworkedServerftprootLoad.Done
This fails because UNC paths are not recognized. (The package executes from another server so I cannot use a local path, nor am I allowed to set-up a local share.)
Can someone offer an alternative suggestion? I'm really hoping this is easier than I'm making it.
Thank you in advance,
Roger
I have a branch office (Server 2008 R2) server running SQL 2005 SP4 (9.0.5057) that is getting the following error message
Replication-Replication Distribution Subsystem: agent BRANCH1-JOBNAME-HEADOFFICE-10 scheduled for retry. TCP Provider: The semaphore timeout period has expired.
It is replicating data over VPN to our Head Office server (Server 2008 R2) running SQL Server 2008 R2 SP1 (Cluster). The connection between the two serves is stable. The issue arose about a week ago but had been working for over a year before that.
Everything I seem to read points to a network issue but I haven't been able to find a cause of it is indeed network related.
Hi -
Is there a resource I can go to that lists people who I pay to talk me through stuff like getting SQL Server Express installed, get some sample data input and then get that data into Excel? I just cannot seem to get any help that works for me to learn SQL Server; the books are obtuse, the online help too indirect. Once I get something working I hope to enhance it on my own, but I have been stuck at the start for a very long time. There is stuff for me to do that is not getting done.
Doug
Any idea of what this means?
My acknowledgement messages are getting stuck in sys.transmission_queue. In profiler, the message generated by the target server (the one sending the ack) is:
This message could not be delivered because it is a duplicate.
The result of the function GET_TRANSMISSION_STATUS is
An error occurred while receiving data: '121(The semaphore timeout period has expired.)'.
Each time I send a new mesage I get one record in sys.conversation_endpoints and two in sys.transmission_queue. The two records in the transmission_queue are the same except one has a NULL for the message body and is_end_of_dialog=1
If I try to clean out the queues they re-populate (I guess becasue the initiator keeps re-trying the message?)
I have double checked my routes back to the initiator and they seem correct (see below). In fact, a second server is using an identical route and it is working OK.
The only thing tricky on this machine is added a second message queue for a differnet kind of message, and it is replying to a different service broker instance. In other words, on server A, database "Production" sends a message to server B, database "Destination" and Server A, database "Schedule" also sends a message to server B, database "Destination".
In the respective return routes I have double checked the guid for the broker_instance.
The broker_instance value in each return route is right out of server A's sys.databses view:
name service_broker_guid
-------------------------------------------------------------------------------------------------
Production 3BE812A8-5212-45D2-8664-521F83689585
Schedule 86113D85-A594-4EAB-8460-3E459EE8F055
The return routes look like this:
CREATE ROUTE [SendReplyProduction] AUTHORIZATION [mssqlssb]
WITH SERVICE_NAME = N'//mycompany.com/SSB/Services/ProductionChangeService' ,
BROKER_INSTANCE = N'3BE812A8-5212-45D2-8664-521F83689585' ,
ADDRESS = N'TCP://Server_A:4022'
The above route should send the reply to the "Production" database on Server A
CREATE ROUTE [SendReplySchedule] AUTHORIZATION [mssqlssb]
WITH SERVICE_NAME = N'//mycompany.com/SSB/Services/ScheduleChangeService' ,
BROKER_INSTANCE = N'86113D85-A594-4EAB-8460-3E459EE8F055' ,
ADDRESS = N'TCP://Server_A:4022'
The above route should send the reply to the "Schedule" database on Server A
Is this the correct way to do it? And can anyone tell me why I get the semaphore error?
For what it is worth, I am using Transport security only with windows authentication (both machines on the same domain and no certificates)
Thanks for any help!
John
I already posted this question in the Wrong Forum.
However I was wondering if it is possible to create a variable that holds the filename as an expression. I am using a For each loop to pick up files and i want to insert the 'Filename' as a colum so that i can differentiate among the rows in my destination Table.
Using the 'Derived Colum' in DTS I can link the colum to the variable. However i do not know how to create the variable which will store the filename for each file....
Any Clues...
Would really appreciate the help.....
Hello All,
I have about 160 packages in my system, all using about 20 shared datasources.
When changing one of the datasource's connection (changing the server name), I need to open every one of my packages and press OK to allow the remapping to the new server. (this is something I don't understand: wasn't this the meaning of using a share datasource in the first place? what's the advantages in that case?)
So, I have heard about Package configuration, and how it supposed to support all of this, But I don't understand something: The configuration is set to a certain package. If I have 2 packages, using the same two (of four) Datasources. Using the configuration wizard from one of the packages, I mark the connection string from the datasource. I need to do the same in the other package? will the configuration table hold only one value for that connection? If I change the value of the connection string will it affect all the packages using that datasource or only the ones using configuration?
Thanks,
Liran
this querry below works perfect when i assign the us.UserID = 29 but i need to be able to use the @UsersMaxID variable..... when i debug all of my values are right where they need to be... even this on ((( @UsersMaxID ))) but for some reason it will not work with the next select statement...
can someone make the pain go away and help me here..??
erik..
GOSET ANSI_NULLS ON GO
ALTER PROCEDURE AA
ASDECLARE @GenericColumn Varchar (200) DECLARE @GenericValue Varchar (200)
SET @GenericColumn = 'FirstName'SET @GenericValue = 'Erik'
DECLARE @SQL NVARCHAR(4000) DECLARE @UserID INT DECLARE @UsersMaxID INT DECLARE @MaxID INT
declare @tempResult varchar (1000)
-------------------------------------------Define the #Temporary Table----------------------------------------------CREATE TABLE #UsersTempTable ( ID int IDENTITY PRIMARY KEY,
UserID [int], FirstName [varchar](30), LastName [varchar](30), CompanyName [varchar](200), Address1 [varchar](75), Address2 [varchar](75), City [varchar](75),ActiveInd [int], Zip [varchar](10), WkPhone [varchar](12),HmPhone [varchar](12), Fax [varchar](12), Email [varchar](200), Website [varchar](200), UserType [varchar](20),Title [varchar](100),Note [text], StateCD [char](2), CountryCD [char](2), CompanyPhoto [varchar](50), CompanyDescr [varchar](2000)) ---------------------------------------Fill the temp table with the Customers data-----------------------------------SET @SQL = 'INSERT INTO #UsersTempTable (UserID, FirstName, LastName, CompanyName, Address1, Address2, City, ActiveInd, Zip, WkPhone, HmPhone,Fax, Email, Website, UserType, Title, Note, StateCD, CountryCD, CompanyPhoto, CompanyDescr)
Select Users.UserID, Users.FirstName,Users.LastName, Users.CompanyName, Users.Address1, Users.Address2, Users.City, Users.ActiveInd, Users.Zip, Users.WkPhone, Users.HmPhone,Users.Fax,Users.Email,Users.Website, Users.UserType,Users.Title, Users.Note,Users.StateCD, Users.CountryCD,Users.CompanyPhoto,Users.CompanyDescr
FROM USERS
WHERE ' + @GenericColumn +' = ''' + @GenericValue + ''''
EXEC sp_executesql @SQL
SET @MaxID = (SELECT MAX(ID) FROM #UsersTempTable)SET @UsersMaxID = (SELECT UserID From #UsersTempTable WHERE ID = @MaxID)
SELECT SpecialtyName FROM Specialty s INNER JOIN UserSpecialty us ON s.SpecialtyCD = us.SpecialtyCD WHERE us.UserID = 29
SELECT * FROM #UsersTempTable
==========================================================================================SET @UsersMaxID = (SELECT UserID From #UsersTempTable WHERE ID = @MaxID)
SELECT SpecialtyName FROM Specialty s INNER JOIN UserSpecialty us ON s.SpecialtyCD = us.SpecialtyCD WHERE us.UserID = 29 <<<<<<<<<<<<<<<<< i need @UserMaxID ........RIGHT HERE
I am connecting to a new SQL Server 2008 R2 database using SSMS from my ADMIN VM workstation. I bring up a Stored Procedure and make a change.... I execute the Stored Procedure... after it finishes.... I exit out without saving to a file.... I go back in and my change was not held.
I can do the exact same process with an old SQL Server 2005 database. Is there a permission I am missing to set to be able to do this on the 2008 database.
I have this query that returns the largest value in a row, but i need to know the column name that this value is in as well. any help in advance is appreciated
select clientID,
(select max(incomeValue)
from
(select earnings as incomeValue
union all
select unemployment
union all
select pensionRetirement
union all
select alimony
union all
select childSupport
union all
select dividendInterest
union all
select SS
union all
select SSI
union all
select SSDI
union all
select veteranBenefits
union all
select FIP
union all
select workStudy
union all
select other
union all
select otherHHWS) as income) as MaxIncomeValue
from tbl_income
I don't know where to post this kind of stuff so here goes...
I have maintenance plans which sometimes fail because the delete step reports that the old backup file is "in use." I have no idea how to determine what Windows thinks is holding the file. HOw do you determine who is holding a file hostage??
Thanks.
Here's a quick script that will return the inputbuffer of processes that are holding more than a certain threshold of locks (by default, 10, but it's easy to modify). Handy for tracking down what query is holding those 1400 locks.
Yes, it uses a cursor. I'd welcome amendment by anyone who has the insight on converting it to pure set-based.
Cheers
-b
CREATE PROCEDURE sp_lock4 AS
set nocount on
DECLARE @tSpids table(spid int PRIMARY KEY CLUSTERED,count int)
DECLARE @iSpid int,@iCount int
insert into @tSpids (spid,count)
select convert (smallint, req_spid) As spid,
count(*) as count
from master.dbo.syslockinfo,
master.dbo.spt_values v,
master.dbo.spt_values x,
master.dbo.spt_values u
where master.dbo.syslockinfo.rsc_type = v.number
and v.type = 'LR'
and master.dbo.syslockinfo.req_status = x.number
and x.type = 'LS'
and master.dbo.syslockinfo.req_mode + 1 = u.number
and u.type = 'L'
group by converT(smallint,req_spid),'dbcc inputbuffer(' + cast(req_spid as varchar(4)) + ')'
having count(*)>10
order by count(*) desc
DECLARE cLoop cursor for
select spid,count from @tSpids
OPEN cLoop
FETCH NEXT FROM cLoop INTO @iSpid,@iCount
WHILE @@FETCH_STATUS=0
BEGIN
select 'spid ' + cast(@iSpid as varchar(4)) + ' has ' + cast(@iCount as varchar(5)) + ' locks.'
exec ("dbcc inputbuffer (" + @ispid + ")")
FETCH NEXT FROM cLoop INTO @iSpid,@iCount
END
CLOSE cLoop
DEALLOCATE cLoop
return (0) -- sp_lock
GO
I've done some basic database design in the past, but am a relative newbie to design. I have recently come across a situation I'm not sure how to handle. Here's the situation...
Assume we've got a contacts table which holds information about our contacts. All contacts have the same basic information - name, address, telephone, etc. Each contact is of a certain type - let's just say a, b, and c, for ease. This contact type is stored in the contacts table. Now, on contacts of type b, I also have to store some additional data. What it is doesn't really matter. I found a way to set this up, but I'm not sure that I'm going about it the right way, and would love some advice on the proper way to do this. Basically, what I did is create my contacts table:
Contact_id, contactName, ContactAddress, ContactPhone, ContactType.
Created a contacttype table
ContactType, ContactTypeDescription, ContactAddInfo
What I've done is left contactaddInfo as a nullable field. When it has a value, that value is the name of a table which holds the additional information that I need for the contact... So when I'm running a query, I can tell if I need to reference another table by checking the value of ContactAddInfo.
I can't imagine that this is the best solution, but it was the first thing that popped into my head, and it's a really small database that's using it. However, I'm now being faced with the same situation in a much more important, larger database, and I'd love to know the 'right' way.
Thanks for any guidance you can provide!
Erin
is there any more efficient way for example to implement the next query?
SELECT s1.article, dealer, s1.price
FROM shop s1
JOIN (
SELECT article, MAX(price) AS price
FROM shop
GROUP BY article) AS s2
ON s1.article = s2.article AND s1.price = s2.price;
WHERE dealer = 'dealer sample'
What indexes I should create for this query?
I'm working on an application that allows users to set up scheduled time based reports. Each scheduled report creates a SQL Agent job associated with a schedule.The default time to fire these off is 8:00 AM. There are several hundred. DWH and it has no trouble running hundreds of reports all fired off at the same time.
There are several ETL processes and occasionally they don't complete before our verbal SLA of 8:00 AM.
My problem is on days where the ETL runs past 8:00 AM I wan't to hold these scheduled jobs from firing off.
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
Hi Folks,
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Thanks in advance
We are facing deadlock issue in our web application. The below message is coming:
> Session ID: pwdagc55bdps0q45q0j4ux55
> Location: xxx.xxx.xxx.xxx
> Error in: http://xxx.xxx.xxx.xxx:xxxx/Manhatta...Bar=&Mode=Edit
> Notes:
> Parameters:
> __EVENTTARGET:
> __EVENTARGUMENT:
[code].....
Here is my code
ALTER PROCEDURE Test
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @From varchar(10)
DECLARE @To varchar(10)
DECLARE @DBName varchar
SELECT TOP 1 @From = CONVERT(char,CreateDate,101) FROM CustomerInfo
WHERE TicketNum =
(SELECT TOP 1 TicketNum FROM CustomerInfo
WHERE CreateDate <= DATEADD(mm, -30, CURRENT_TIMESTAMP)
ORDER BY CreateDate DESC)
SELECT @To = CONVERT(char,GETDATE(),101)
SET @DBName = 'Archive_SafeHelp'
CREATE DATABASE @DBName + ' ' + @From + ' ' + @To
END
I am trying to create a database based on the name contained in the variables. I get the error 'Incorrect syntax near '@DBName'. How do i accomplish this?
Thanks
Ganesh
Hi,
I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%)
I would get an error message saying:
"550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process"
and then the upload failed.
I'm using SQL Express. Does anybody know what's the cause?
Thanks a lot
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and
every time the process id is different. Here it is 3880.
Darek
select * from sysprocesses
How can I determine whether a process a system or user?
Hello,
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process:
Spid 55 55
ecid 5 5
Ecid 0 0
ObjId 0 1784601646
IndId 0 0
Type DB PAG
Resource 1:1976242
Mode S IS
Status TransID GRANT GRANT
TransID 0 16980
TransUOW 00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH
CMD AWAITING COMMAND
Physycal id 1059
Login time 2007-07-05 04:29:53.873
nat address DFF06EBF974D
Wait type 0x0046
HostName .
BlkBy .
DBName grpprddb
CPUTime 54331
DiskIO 1059
ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request:
select * from SYSOBJECTS
where id=1784601646
But I have had no returns.
Regards,
Renaud
I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Thanks,
Monisha
Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
While configuring log shipping using SQL 2000 Ent, the copy process failed with this message :
The process cannot access the file because it is being used by another process.
does anyone know what cause this ?
SAP R/3 is configured with the system, could this be the problem ?