I've got an issue where a join takes about 3 minutes to run on a development server (2 X 1.4 GHz/ 2GB / Win2K3SP1 / SQL2KSP4 (8.00.2187) standard) and does not finish (even after 10 Hours!) on a monster (8 X ? GHz/ 12GB / Win2K3SP1 / SQL2KSP4 (8.00.2187) clustered Enterprise) data center test machine.
This is a join between a table with 360K rows and another with 5.6 Mil rows. Identical data, schema, indexes, auto-stats, etc. between the two boxes. I see no CXPackets, so the parallel processing issue doesn't seem to apply.
I have an issue with Sql Server 2012 and Datastage which extracts the table(just select * from table) and loads into one file without any transformation in between. Source table has around 45million rows. Datastage Process extracts upto 22million rows and then it stalls forever(running state). I had investigated into the Database and i could see the transaction runs on database for some time(runnable and suspended state) for sometime and it disappears suddenly. I am surprised to see Datastage Process still shows rows are being extracted even after transaction is disappears and Datastage process up to 22million rows and then do nothing.
I have an FTP task that once the file is loaded a script task is activated and then a data flow process starts. I can connect to the FTP server with the Test connection and I can see the file in the remote directory "/HRData.txt" however even with the Delay validation set to true it does not download the file.
I have a package that has three control flow items - an Execute SQL task, a Data Flow task and another Execute SQL task - linked in sequence by On Success constraints and contained by a Sequence container. I want any of the three contained tasks that fails to cause the Seuqence container to be rolled back and write a checkpoint.
I've configured the package to use Checkpoints, set the TransactionOption to Required and the FailPackageOnFailure to True ion the Sequence container and set the TransactionOption to Supported and the FailParentOnFailure to True on each of the three contained tasks.
When I attempt to run the package in debug mode, the first Execute SQL task executes fine but validation of the Data Flow task never finishes. If I switch the TransactionOption of the Sequence container to Supported instead of Required, the package executes fine.
I have had problems in the past where MSDTC was not running but that causes an error and I've checked that it's running and it is.
I hope to get some help with a stored procedure that never stops executing when run from Reporting Services development environment.
The server: SQL Server 2005 SP2 x86, 2 gig ram, 2 processor cores.
The stored procedure I execute is simple, it declares and sets some variables and then a executes a select statement with 6 joins. If I execute the stored procedure from Management Studio the query runs and returns about 50 000 rows in ~2 seconds. No problems!
The problems arises when I execute the stored procedure from visual studio (testing my reporting services report). The query will never complete its execution!?
I checked the activity monitor and can verify I have NO processses with any information in the blocked by or blocking column. The strange thing is I got 3 rows for process id 64, only one row (row 1) printing the executing user.
Row 1: Stutus suspenden, Wait Type CXPACKET Row 2 and 3 are pending between runnable and suspended and wait typoe pageiolatch_ex and no wait type at all when I refresh. These are probably parallell threads executed in the query.
The strange thing here is that this process never completes and if I do a trace the last command executed is select statement. I don´t understand what the problem is, sql server bug? Parellelism problem (in this case, why?)
Error 0x80070005 while loading package file "Package.dtsx". Access is denied. .
The package is executed from the main package via an 'Execute Package Task'. The strange thing is that the error comes after 'Package.dtsx' has run successfully. I am logging the PackageStart/PackageEnd and error events and I see that Package.dtsx ends successfully and then the "Access is denied" error occurs. The main package is launched by executing dtsexec via a SQL Server Agent Job. The packages have 'SaveCheckpoints' set to True. Any ideas are welcome. Thanks.
I was just debugging a stored procedure visual studio and I was surprised with what I was watching.
I'm running SQL 2005 and visual studio 2005. I have a set of nested try/catch blocks.
It fails on the first try and drops into the catch block just as it should. Within the catch block a dynamic sql statement is created. A try block begins and attempts to exec(@sql). It then drops to the catch block. However, I copy the statement into SQL Management Studio and it runs without error everytime.
Why is it dropping into the catch block? Logically it should just complete executing the statement continue without going into the catch block.
Do I have to reset the raiserror values between try blocks or something?
Greetings, I have setup a FormView which functions as it should but after the user input is updated, the table record stays unchanged, and when I trap the FormView1_ItemUpdated and look at the SqlDataSource1.UpdateCommand, it shows this: UPDATE [aspnet_test] SET first_name = '', last_name = '', email = '' WHERE id = @original_ID Here is most of the code I am using:<asp:FormView ID="FormView1" runat="server" DataSourceID="SqlDataSource1" DataKeyNames="id, first_name, last_name" OnItemUpdating="FormView1_ItemUpdating" OnItemUpdated="FormView1_ItemUpdated" > .. // my ItemEditTempate is here.</asp:FormView> <EditItemTemplate>First Name: <asp:TextBox Text='<%# Bind("first_name") %>' runat="server" ID="author_name" Columns="20"></asp:TextBox><br />Last Name: <asp:TextBox Text='<%# Bind("last_name") %>' runat="server" ID="TextBox1" Columns="20"></asp:TextBox><br />E-mail: <asp:TextBox Text='<%# Bind("email") %>' runat="server" ID="TextBox2" Columns="20"></asp:TextBox><br /><br /><asp:Button ID="UpdateButton" runat="server" Text="Update" CommandName="Update" /><asp:Button ID="CancelButton" runat="server" Text="Cancel" CommandName="Cancel" /> </EditItemTemplate> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ASPNETDBConnectionString1 %>" SelectCommand="SELECT id, first_name, last_name, email FROM aspnet_test where id = 1"UpdateCommand="UPDATE [aspnet_test] SET first_name = '<%# first_name %>', last_name = '<%# last_name %>', email = '<%# email %>' WHERE id = @original_ID "> <UpdateParameters><asp:Parameter Name="original_ID" Type="Int32" /></UpdateParameters></asp:SqlDataSource> Any idea where the @original_ID is supposed to get its value from, or why does the SQL command shows blank fields?Thanks Eric.
I have a source table which I'm splitting 3 ways based on a column value, but the target is the same OLE DB destination table. One conditional path is to a Multi-Cast two way split to same OLE DB gestination table. The default split is to a flat file for logging unknown record types. For a test I have data for only the 3 column values I want, but I'm having trouble with the process completing. If I pre-filter the data going into the source table by one or two values I can get the process to complete even if one split is to the multicast. If I include all three data types in the source table, I get different results depending on the order in which the conditions are specified - sometimes only two split paths are executed; other times all three are executed, but in some cases only one path of the multicast split is executed. In any case, when the three source data types are used in the test, the process never competes - the pathes are in a yellow condition and never complete.
Am I creating some kind of deadlock situation by having the source data directed to the same target table via 4 splits? Any help you can provide is appreciated. Thanks.
Error 0x80070005 while loading package file "E:SSISPackagesPackage1.dtsx". Access is denied. .
The package is executed from the main package via an 'Execute Package Task' that is within a 'For Each Loop' container. The 'For each loop' goes through a single iteration as expected. The strange thing is that the error comes after 'Package1' has run successfully. I am logging the PackageStart/PackageEnd and error events and I see that Package1 ends successfully and then the "Access is denied" error occurs. The main package is launched by executing dtsexec via Process.Start() from a web page. The packages have 'SaveCheckpoints' set to True. Any ideas are welcome. Thanks.
We are using SSIS to load some 100k records from flat file to Oracle Destination. We are using Oracle 10g client. But during the execution after some 5hrs or 6hr with 900k records upload we are getting the message Package execution completed. In the Execution results there is no message related to success or failure and the tasks in the Data Flow where yellow in color. What might be the problem? Any information regarding this case will be helpful for us.
I have a cube that we are processing nightly via an Analysis Service Processing Task in SSIS. In order to increase the performance of the processing time, we elected to use a lot of rigid dimension attributes, and do a full process of everything in the SSIS task. The issue that I am having is that after that task completes, I need to go into Visual Studio to deploy the cube becuase we are unable to browse or use the cube. This issue seemed to start once we changed the SSIS Analysis Service Processing Task to do a full process on the dimensions, rather than an incremental.
I would expect that once development is done, and it is processed and deployed, that is it. My thinking is that the SSIS task should just update the already deployed cube,
Ive built an SSIS package which generates a file from a legacy system and then downloads the file into a designated folder on the server. I need the file watcher task to wait for a the file to completely finish loading before it says it is complete. Currently, as soon as the file is created, the WMI step finishes.
I went to one of the Microsoft "Ready To Launch" events over a year ago. Microsoft was gracious and gave everyone who attended a free copy of Visual Studio 2005 and SQL Server 2005. I have installed the Visual Studio and use it all of the time. I also installed the SQL server 2005 but I can not find the application on my computer. After the install the only items that appear to have been installed are the following: SQL Server Configuration tools(SQL Server Configuration manager,SQL Server Error and usage reporting, SQL Server surface area confiuration, Reporting Services configuration). There is also a menu icon labeled "Microsoft SQL server upgrade advisor" and SQL server upgraded wizard. That is all. I can't find anything that is analogus to the Enterprise manager that was in SQL server 2000 or anything that is analogous to Query Analyzer of 2005.
Can someone help me out? We use SQL server 2005 so I know how it looks. I just can't see where it insalled. I don't think it did?
-- Get the new Customer Identifier, return as OUTPUT param SELECT @NoteID = @@IDENTITY
-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned -- users. IF @FK_UserIDList IS NOT NULL EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList
-- Insert New Address record -- Retrieve Address reference into @AddressId -- EXEC spInsertForUserNote -- @FK_UserID, --@NoteID, -- @BeenRead -- @Fax, -- @PKId, -- @AddressId OUTPUT
COMMIT TRANSACTION
-------------------------------------------------- GO
ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1 FROM testsupplierSCNCR I am getting the result of 01/01/2007
"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I have traced this to an insert statement that executes as part of a stored procedure.
INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)
There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.
Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).
Hey, i've written a query to search a database dependant on variables chosen by user etc etc. Opened up a new sqldatasource, entered the query shown below and went on to the test query page. Entered some test variables, everything works as it should do. Try to get it to show in a datagrid on a webpage - nothing. No data shows. SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches FROM dbo.MAKES INNER JOIN dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 ORDER BY count(*) DESC
Here is the page source
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %> <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>" SelectCommand="	SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches 	FROM dbo.MAKES INNER JOIN 				 dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN 				 dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN 				 dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN 				 dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID 	WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) 	GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID 	HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 	ORDER BY count(*) DESC "> <SelectParameters> <asp:ControlParameter ControlID="DropDownList1" Name="ATT_ID1" PropertyName="SelectedValue" /> <asp:ControlParameter ControlID="TextBox1" Name="VAL1" PropertyName="Text" /> <asp:Parameter Name="ATT_ID2" /> <asp:Parameter Name="VAL2" /> <asp:Parameter Name="ATT_ID3" /> <asp:Parameter Name="VAL3" /> <asp:Parameter Name="ATT_ID4" /> <asp:Parameter Name="VAL4" /> </SelectParameters> </asp:SqlDataSource> <asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>" SelectCommand="SELECT * FROM [ATTRIBUTES]"></asp:SqlDataSource> <br /> <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource2" DataTextField="ATTRIBUTE_NAME" DataValueField="ATTRIBUTE_ID"> </asp:DropDownList> <asp:TextBox ID="TextBox1" runat="server" AutoPostBack="True"></asp:TextBox><br /> <br /> <br /> <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="DERIVATIVE_ID" DataSourceID="SqlDataSource1"> <Columns> <asp:BoundField DataField="DERIVATIVE_ID" HeaderText="DERIVATIVE_ID" InsertVisible="False" ReadOnly="True" SortExpression="DERIVATIVE_ID" /> <asp:BoundField DataField="Matches" HeaderText="Matches" ReadOnly="True" SortExpression="Matches" /> </Columns> </asp:GridView> </asp:Content> AFAIK I have configured the source to pick up the dropdownlist value and the textbox value (the text box is autopostback). Am i not submitting the data correctly? (It worked with a simple query...just not with this one). I have tried a stored procedure which works when testing just not when its live on a webpage. Please help!
(Visual Web Devleoper 2005 Express and SQL Server Management Studio Express)
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.
Thanks in advance
Daniel Buchanan.
If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.
We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T
• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues
• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"
• We are using the last version of Excel Add-in
• We try to reinstall the MDS feature
• If I backup/restore MDS database to other server it works
• We updated to SQL 2012 SP2 + CU4 but the error persisted ...
Looking at the MDSTraceLog we are routed to the this msg
SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28
At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped
** Error found when try to get data from a entity using Excel add-in ** =================================== Sequence contains no elements ------------------------------ Program Location: Â Â at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke() Â Â at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120)) insert into #temptable SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10 --column name declare @cname varchar(30)
-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!! -- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"
set nocount on go if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1 if object_id('tempdb.dbo
[code]....
This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?
For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?
I want my output to be
CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc
Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.
do i need to nest a query in RS if i want a calculated column to be compared against a multi value variable? It looks like coding WHERE calcd name in (@variable) violates SQL syntax. My select looked like
SELECT ... ,CASE enddate WHEN null then 1 else 0 END calcd name FROM... WHERE ... and calcd name in (@variable)
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?
FROM [Order Details] OD, Orders O, Products P, Categories C
WHERE OD.OrderID = O.OrderID
AND OD.ProductID = P.ProductID
AND P.CategoryID = C.CategoryID
AND C.CategoryName = @CategoryName
AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear
GROUP BY ProductName
ORDER BY ProductName
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.Common
Imports System.Diagnostics
Public Class ConnectionPoolingForm
Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance
Public Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
'Force app to be available for SqlClient perf counting
Using cn As New SqlConnection()
End Using
InitializeMinSize()
InitializePerfCounters()
End Sub
Sub InitializeMinSize()
Me.MinimumSize = Me.Size
End Sub
Dim _SelectedConnection As DbConnection = Nothing
Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged
End Sub /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// I executed the code successfully and I got a box which asked for "Enter the query string". I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.
I have two tables .. in one (containing user data, lets call it u).The important fields are:u.userName, u.userID (uniqueidentifier) and u.workgroupID (uniqueidentifier)The second table (w) has fieldsw.delegateID (uniqueidentifier), w.workgroupID (uniqueidentifier) The SP takes the delegateID and I want to gather all the people from table u where any of the workgroupID's for that delegate match in w. one delegateID may be tied to multiple workgroupID's. I know I can create a temporary table (@wgs) and do a: INSERT INTO @wgs SELECT workgroupID from w WHERE delegateID = @delegateIDthat creates a result set with all the workgroupID's .. this may be one, none or multipleI then want to get all u.userName, u.userID FROM u WHERE u.workgroupIDThis query works on an individual workgroupID (using another temp table, @users to aggregate the results was my thought, so that's included) INSERT INTO @users SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = @workGroupIDI'm trying to avoid looping or using a CURSOR for the performance hit (had to kick the development server after one of the cursor attempts yesterday)Essentially what I'm after is: SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = (SELECT workgroupID from w WHERE delegateID = @delegateID) ... but that syntax does not work and I haven't found another work around yet.TIA!
