I am new to SQL, still learning.
If I want to retreive unique records for e.g. VendorName,City and State however no 2 vendors must be of the same city or state.
How can I do this?
I have used Select and distinct but that still brings unique vendornames in the same state and city. I only need one vendor per city and State.
Help!
I've a excel spreadsheet with 650 records with unique PONumbers. I need to pull data from SQL server based on the PONumbers. I don't want to run select statement 650 times. How do I retrieve the records in efficient way?
View 9 Replies View RelatedHi, does anyone know how to retrieve mistmatched records across 2 tables.
To clarify, I have table A with 1175 records and Table B with 894 records.
The records from table A match exactly some the records in table B.
I want to create another table with the extra 281 records from Table A which does not match that of Table B.
I have tried the query with Select where fields_1.a<>fields_2.b AND fields_2.a<>fields_2.b etc
but that doesn't seem to work.
*desparate*
I really need creating a query that will retreive all records from a table where the dbo.CorpAdv.AcctNum field equals a specific value (for this example "0023"), the TranCode = "R" and the sum of the records, starting with the latest, equals the value of a field in another table (dbo.Master.TotalAdv)
dbo.Master.TotalAdv is numeric (dollar amount) and in this example the value is $1,850.00
dbo.CorpAdv.pID is an integer and unique ID for each record, later records have higher numbers
dbo.CorpAdv.AcctNum is text field
dbo.CorpAdv.AdvAmt is numeric (dollar amounts)
[code]....
hilet me explain my need..following are the tables im using..tbl_company (company table - parent) id company 1 test 2 test123 tbl_dept (department table - master) id dept 1 dept1 2 dept2tbl_compdept (company departments table - child) cmpid deptid 1 1 2 1 2 2 wats my need is.. while the company is listing..by query using joins, result was like this..company depttest dept1test123 dept1test123 dept2i need company test123 should be listd only once..when i use group by or distinct means, all r listed..is there any way to filter out therepeating company list by just listing the company list only once..
View 5 Replies View RelatedI'm fairly new in SQL. Been trying for months to create the right script for this particular case but still cannot give me 100% result as required.
SCENARIO :
I am required to query from 2 tables for those unique record that meets both conditions below:-
1. Status is 1 @ max (trans_id), paychnl = CC
2. Status is 2 @ max (trans_id), paychnl = A or B
FYR, 2 tables and respective columns to query are as below:-
table PTFF --> col ID, TRANS_ID,TRANSDATE,EFFDATE,TRANSCODE
table CHFF --> col STATUS,PAYCHNL
FYI, status refers to the paychnl method status:-
==> 1 means the current paychnl method
==> 2 means the previous paychnl method
paychnl method can be multiple because it will be defined as 2 for all the histories' paychnl chosen earlier, but 1 should only be unique as it is the latest paychnl chosen for each unique ID. however, it may appear more than once when it's taking those in earlier TRANSDATE, so here we would need the max trans_id as it will show the latest updated TRANSDATE.
Apart from that, I need only those most recent paychnl to be A or B and the latest paychnl is CC so, this been indicated by the same max trans_id for the same ID.
Aft trying so many times on this MAX command but failed to get any result, I only managed to come up to this part only. please refer below:-
table PTFF --> col ID, TRANS_ID,TRANSDATE,EFFDATE,TRANSCODE
table CHFF --> col STATUS,PAYCHNL
SELECT DISTINCT PTFF.TRANSCODE,PTFF.ID,PTFF.TRANS_ID,PTFF.TRANSDATE,PTFF.EFFDATE, CHFF.STATUS,CHFF.PAYCHNL
FROM DBO.PTFF PTFF
JOIN DBO.CHFF CHFF
ON CHFF.ID = PTFF.ID
WHERE
PTFF.TRANSDATE BETWEEN 130501 AND 130831
AND PTFF.TRANSCODE='T522'
AND (CHFF.STATUS=1 AND CHFF.PAYCHNL='CC' OR (CHFF.STATUS=2 AND (CHFF.PAYCHNL='A' OR CHFF.PAYCHNL='B')))
However, the script above returns :-
1. All those records with STATUS 1 regardless paychnl is A or B in most recent status 2,
2. Expected results also appear ==> 1 same ID with status 1 while paychnl=CC and status 2 while paychnl=A or B
3. Also duplicates of expected results but for different TRANSDATE and not at MAX TRANS_ID
Samples of the result:-
IDSTATUSTRANS_IDPAYCHNLTRANSDATEEFFDATETRANSCODE
51881712CC13082920130920T522
9361164CC13081620140813T522
78531153CC13082020130814T522
8949151CC13081220130801T522
8949251B13081220130801T522
19081455CC13051620131129T522
19082455A13051620131129T522
19081409CC11101920111129T522
19082409A11101920111129T522
19081404CC11092920111129T522
19082404B11092920111129T522
Hi Respected,
I am working in .net, and according my client he want to see all record from table uniquely, and does not want to give order also.
for doing this i did use DISTINCT, but my problem is when i used DISTINCT the query return sorted records that is why, i need guide which will help to make DISTINCT and physical stored record from the table.
thanks.
bay
regards Rajat.
Time Price Volume
090048 510 6749
090122 510 2101
090135 510 1000
090204 505 2840
090213 505 220
090222 505 1260
090232 505 850
090242 505 200
090253 510 1200
090313 510 570
090343 510 250
090353 510 160
Criteria
Retrieve records with independent price and its total volume per minute
SELECT SUBSTRING(st,1,4) AS Ttime,d_price AS Price,SUM(l_cum) AS Volume FROM cmd4
WHERE sd='20060717' AND serial='0455'
GROUP BY SUBSTRING(st,1,4),d_price,l_cum
Result of the above query: -
Time Price Volume
0900 510 6749
0901 510 1000
0901 510 2101
0902 505 200
0902 505 220
0902 505 850
0902 505 1260
0902 505 2840
0902 510 1200
0903 510 160
0903 510 250
0903 510 570
THE FOLLOWING RESULT STILL NOT A TOTAL FOR A MINUTE]
E.G
0901 510 1000
+
0901 510 2101
=
0901 510 3101 <- I NEED THIS
Can any one advice or give me tips over this. Please
Hello
Im searching for a solution to set all matrix row or cell the same height.
it schoud looks like this example:
This is a simple matrix
test a
text b
text c
text d
text e
text f
text g
This is a matrix with all the same row-height.
test a
text b
.
text c
.
.
text d
text e
text f
text g
.
.
Thx you a lot
I am trying to write a query that will retrieve all students of a particular class and also any rows in HomeworkLogLine if they exist (but return null if there is no row). I thought this should be a relatively simple LEFT join but I've tried every possible combination of joins but it's not working.
SELECT
Student.StudentSurname + ', ' + Student.StudentForename AS Fullname,
HomeworkLogLine.HomeworkLogLineTimestamp,
HomeworkLog.HomeworkLogDescription,
ROW_NUMBER() OVER (PARTITION BY HomeworkLogLine.HomeworkLogLineStudentID ORDER BY
[Code] ...
It's only returning two rows (the students where they have a row in the HomeworkLogLine table).Â
Hi all
I've two tables
community, community_related.
I need to get community names for comm_relatedID from community table
where comm_id = 21 , please see my tables below
Community table Community Related
commID, comm_name comm_id comm_relatedID
21 test1 21 24
22 test2 21 22
23 test3 21 26
24 test 5 21 27
26 test6
27 test7
result am trying to display from community related table after joining community table on COMM_ID = 21 is
comm_id comm_relatedID comm_name
21 24 test5
21 22 test2
21 26 test6
21 27 test7
can anybody please help..with a query, am stuck at this point.
I am using ADODB.Recordset to retrieve the records from an MS Access database. The table has 11450 records and the recordset shows this number as the recordcount too. But when I try to fetch the records in a While loop using EOF as the check, I am able fetch only 4000 or so records. No error occurs and no exception is thrown. Control just comes out of the function. Why could this be happening?
Does Recordset have some limit on the number of records for Jet 4.0 provider?
Any help is appreciated.
Is there a way to get a Stored Procedure to return only unique records from a table? I am using a Stored PRocedure to query a table and it returns all the records in the table and there are many duplicates in the information. I am using SQL Server 2K.
View 12 Replies View RelatedI have the following sql:
SELECT COUNT(patient.patientID) AS total_patients
FROM patient
LEFT JOIN patient_record ON patient_record.patientID = patient.patientID
WHERE sub_categoryID = 4 OR patient_record.allocated = 4
from the database this gives me a COUNT of 22, it should only be 10. I am doing a join and it gives the total records in the two tables where I only want the total in the left table(patient).
How can I GROUP BY patient.patientID in a COUNT query
Thanx, Robson
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
Hi, All
I'm only have permition to query table data and with local sql server installed. Also, capable link server from local machine to live sql server (Blue). Getting error type when ran a query that commons: Column name or number of supplied values does not match table definition. Others, ambiguous column name " ". Here are the information below before i ran the query.
In house data:-Table fields contain (address,city,state,zip,zip4,fips)
-All data type fields are character
-No Primary Key
Local machine table:
-Fipscodes (table) contain data was provided by customer that I inserted into my machine
and column fields (state,zip,fips) made Zip as Primary Key.
So, I wants to able run a query to retrieve data from live server by using some kind of join table with table(FipsCodes)locate in my local machine.
Query Statement:
SELECT h.lname,h.fname,h.street,h.city,h.state,h.zip,h.zip4,h.carroute,h.gender,
h.keycode,h.purprice,h.mortamt,h.phone,h.lender,h.recorddate,h.fips,h.pubmonth,
h.pubday,h.pubyr,h.trantype,h.condocode,h.transdate,h.ratetype,h.loantype,h.birth,
h.heritage,h.estcurrval,h.estcurreq,h.dpbc,n.state,n.fips
FROM blue5.Homeowner.dbo.homeowners AS h INNER JOIN FipsCodes AS n
ON h.FIPS = n.FIPS
WHERE state ='AL' AND fips='001' AND pubDate >= '12/1/2006' AND pubDate <='1/8/2007'
Error occur:
Msg 209, Level 16, State 1, Line 1
Ambiguous column name 'State'.
Server: Msg 209, Level 16, State 1, Line 1
Ambiguous column name 'FIPS'.
, please help me solve this issue and thank you very much everyone.
Hi,
How to display specific number of records? That means I want to display records starting from 3th row to 5th row. Please send your suggestions or links.
Table
-----
Name Age
-----------------
Raja 23
Kumar 26
Suresh 30
Rani 22
Subha 32
Ganesh 25
The result will be
Name Age
-----------------
Suresh 30
Rani 22
Subha 32
Thanx.
GANESAN MURUGESAN
Hello,If I run an action SP from MS Access using ADO:...cmd.executewhere the SP is something like Create...Update tbl1 set fld1 = 'something' where...how can I retrive the count of records affected like from Queryanalyzer?Thanks,Rich*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 5 Replies View RelatedHi all,
I have a report which is grouped by a field called R_ID, which gives me a list of records for each R_ID. So here is the thing, I want to get only top 3 records for each R_ID. Is there any way to do this thing in the report level. I tried it from the query level, but the result is not like what I wanted.
Please let me know if some body has any idea.
Thx.
I want to write a sql Query which retrieves the last (some number ) records form a Table ,
the table specification is like :
Table1
==================================
ID int , <----- is identity And identity seed =1
Title char(50) ,
News nvarchar(100)
its like I want to get the last 5 news form DB ...
Hello Everyone and thanks for your help in advance. I have a SQL Server Table wtih approximately 100,000 records. I need to determine if there are duplicate records in this table. My probelm is that there is a unique ID column that was added for each row, so I'm not exactly sure how to filter the rows. Any help on this would be greatly appreciated. Thanks.
View 4 Replies View RelatedI'm trying to read from a table and return only the unique records from a table.
The table has 3 columns,
ID - Autoinc
Amount - decimal 6,2
Name - varchar(10)
If there are records like
ID Amount Name
1 0.03 Name1
2 0.07 Name9
3 0.05 Name3
4 0.03 Name8
5 0.07 Name4
6 0.06 Name7
I am wanting to retreive only records 3 & 6 (values 0.05
0.06) as they are the only ones where amount is unique i.e. only 1 entry in the table.
I put the following sql statement together which achieves this but it it only returns the amount value
select Count(amount),amount from bids group by amount having count(amount)<2 order by amount
So I then expanded it to read
select Count(amount),amount,name from bids group by amount,name having count(amount)<2 order by amount
not sure where i'm going wrong but the results returned were
0.03
0.03
0.05
0.06
0.07
0.07
Appreciate any help here.
Hello,
I have a table with sixty columns in it, five of which define uniqueness for the records. Currently there are 190,775 records in the table. One of the records is a duplicate. I need to insert only the unique records from this table (all columns) into another table. I cannot use a unique nonclistered index with IGNORE_DUP_KEY in the destination table because of a problem I am having with the 'duplicate key was ignored' message. The destination table has a primary key with a clustered index on the same five columns.
How can I put together a SELECT statement that will give me all of the columns in the source table based on uniqueness of the five key columns?
Does my request make sense? Please let me know if you have questions.
Thank you for your help!
CSDunn
Let's say I have a data entry from a pool of employees:
table is as follow:
EmpNo Branch Date Amount
1 A101 11/30/2007 $0.90
1 A101 11/30/2007 $1.20
2 A101 11/30/2007 $0.90
3 A101 11/30/2007 $0.80
How can I select the whole table and only take in 1 unique latest entry if there are multiple entries for the same day, same branch under same employee number?
Thanks! :D
I am trying to create a select query similar to the following but the problem I am having is that I want to only select one record where there may be several with the same dw_order_no. I have tried various ways using SQL developer but without success
SELECT VE_EZP_ORDER_TRANS.EZP_BILL_STATUS AS EZP_BILL_STATUS1,
VE_EZP_AGED_CUSTOMER_DEBT.SURNAME,
VE_EZP_AGED_CUSTOMER_DEBT.DEBT_AGE_CATEGORY,
VE_EZP_AGED_CUSTOMER_DEBT.DEBT_AGE,
VE_ORDERLINE.DW_ORDER_NO,
[code]...
Steve writes "I need a query to show all the medicare patients only. I want only one kind of insurance for each patient. I am getting records where each patient has more than one insurance like medicare and something else.
Each patient has one,two, three or more insurances like
medicare,medical,blue cross,tricare etc.
The result should look like this:
Sam pick Medicare
John white Medicare
Ann Richmond Medicare
My query retrieves patients with more than one insurance.
select patient_first_name f_name,patient_last_name l_name,patient_zip zip,
count(distinct payer_id) payer_id
from claims
where payer_id ='abcdefhj'
group by patient_first_name, patient_last_name,patient_zip
having count(distinct payer_id)= 1
order by patient_zip asc;
please help me. Greatly appreciate your response."
Could some one please help me with the following query.
I have multiple tables link together base on wo_No and prt_Mark fields and I get the following results.
wo_No | prt_Mark | dwg_Seq |
324037 | d400 | 1S2 |
324037 | d400 | A1 |
324037 | d400 | 1 |
219001 | 56 | 2B |
219001 | 56 | 2C |
219001 | 56 | 2C |
What I would like is to combine the unique dwg_Seq where they have the same wo_No and prt_Mark.
324037 | d400 | 1S2,A1,1 |
219001 | 56 | 2B,2C |
I would also be happy with the following results get the Max unique dwg_Seq and count how many more unique dwg_Seq there are.
324037 | d400 | A1 + 2 |
219001 | 56 | 2B + 1 |
Any help would be greatly appreciated.
Hi,
I am new to Microsoft Technologies, can any one say how to connect/ retrieve data's from Active Directory through SQL SERVER from scratch. I need with some sample codes.....
Thanks in advance
raj d.s
I have a situation where I need a table if bad items to match to. Forexample, The main table may be as:Table Main:fd_Id INT IDENTITY (1, 1)fd_Type VARCHAR(100)Table Matcher:fd_SubType VARCHAR(20)Table Main might have a records like:1 | "This is some full amount of text"2 | "Here is half amount of text"3 | "Some more with a catch word"Table Matcher:"full""catch"I need to only get the records from the main table that do not haveanything in the match table. This should return only record 2.
View 1 Replies View RelatedI have a situation where i am trying to run two query's and retrieveone record from each query, then using Union combine them into onerecordset. The First Query is strait forward and should just returnthe matching record however the second query needs to find a randomrecord and return it. The union is causing me some trouble. It seemsthat any method i try to find a random record just causes an error.Here is an example of a query that's causing the problem.--------------------------------------------------------------------------------------------------------declare @variable1 smallintdeclare @variable2 intset @variable1 = 10002set @variable2 = 1001211720select col1, col2, col3, col4, col5, col6from table1where col1 = @variable1 and col2 = @variable2unionselect col1, col2, col3, col4, col5, col6from table2where col2 = @variable2order by newID()--------------------------------------------------------------------------------------------------------I have also tried the following which does not provide an error but icannot find a way only to return one record from the second query--------------------------------------------------------------------------------------------------------declare @variable1 smallintdeclare @variable2 intset @variable1 = 10002set @variable2 = 1001211720select newID() as colID, col1, col2, col3, col4, col5, col6from table1where col1 = @variable1 and col2 = @variable2unionselect newID() as colID, col1, col2, col3, col4, col5, col6from table2where col2 = @variable2order by colIDIf anyone has any ideas, fixes, or thoughts i would appreciate them...thanks in advance...FYI i am fairly inexperienced in SQL so please feel free to let me knowif you need more of an explination.
View 9 Replies View RelatedI€™m working on a database project that will ultimately contain millions of records for each lot. In addition, each lot will have up to 96 corresponding serial number records.
I would like to add a SQL parameter that would tell the database engine to only return X number of records.
For Example:
If table TBL_LOTS contains one million records I would like to limit the return set to 100 for example.
What would I need to add to the SQL command to below to restrict the data set to the first 100 records in the set of one million?
SELECT [LOT NUMBER]
FROM TBL_LOTS
WHERE [STATMENTS]
I have a stored procedure that appends data from a temp table to a destination table. The procedure is called from an aspx web page. The destination table has an index on certain fields so as to not allow duplicates.
The issue I'm having is if the imported data contains some records that are unique and some that would be duplicate, the procedure stops and no records are appended. How can I have this procedure complete it's run, passing over the duplicates and appending the unique records? Since the data is in a temp table (which gets deleted after each append) should I run some sort of 'find duplicates' query, and delete the duplicates from the temp table first, then append to the destination table?
Thanks in advance.SMc
Hi All,
I need a bit of help with a join. I have 2 tables :
TradeSummary
has fields : SymbolID, CurrentPrice, TotalValue
Trades
has fields : SymbolID, TradeID, ExecutionTime, TradeValue
TradeSummary has one entry for each SymbolID, while Trades contains one or more entries per SymbolID
and what I want to retreive is :
For every item in TradeSummary get CurrentPrice, TotalValue from TradeSummary
and also get TradeValue from Trades for the record for max(ExecutionTime)
tables are joined on TradeSummary.SymbolID = Trades.SymbolID
Every attempt of mine so far returns multiple rows for each SymbolID - I want only one row per SymbolID
thanks in advance