Reads And Writes To A Sql Server Database Per Table
Aug 1, 2006Is it possible to find the reads/writes to a sql server table ?
View 2 Replies
ADVERTISEMENT
SQL Server 2008 :: Disk Reads And Writes
Nov 5, 2015How can I measure the disk reads and writes to see if I need to add aditional disks to the server?
View 2 Replies View RelatedSQL Server 2008 :: High Volume Reads And Writes?
Jul 6, 2015We are in the process of moving existing clustered SQL server databases to AWS. There is one major database that has intensive reads and writes transactions. I'm wondering what is the best design to optimize the performance for both R/W since we have constant issues historically with the current environment when massive updates are happening. Reads shall have higher priority over writes.
View 2 Replies View RelatedSQL Server Admin 2014 :: Indexes With More Writes Than Reads
Jul 17, 2015I have inherited a database that is over-indexed, i.e. there are sometimes 10-20 indexes on a table. The performance is at times not great due to blocking from long running queries. I want to clean up the indexes as a starting point.
Through a query I found some time ago on the SQLCat blog I have discovered a large number of indexes in the database that have a huge disparity between reads and writes. The range of difference is sometimes almost 2 million more writes than reads. Should I just drop the indexes that have say, more than 100,000 more writes than reads and then see what the Missing Index DMVs tell me after a few days of running without those indexes?
In some cases there are a few hundred thousand reads but maybe a million writes on the index. Thus, there are a fair number of reads happening, just not in comparison to the number of writes. In some cases there are almost no reads and a million or more writes. I am obviously dropping those indexes. I just am not sure what to do about the indexes that do have a fair number of reads.
What Is The Best Way To Achieve Best Latency For Reads And Writes To SQL Server 2005?
Oct 18, 2007I am looking into various options to improve latency of our application (we figured the latency is mainly because data persistence - writes and reads from DB). I am looking into In-Memory databases also. But, before making that decision (of using in memory databases), I would like to see if there is a way to configure SQL Server 2005 to get as close performance as in-memory databases?
My question:
1. Is there a way that I can configure SQL Server 2005 to use a CACHE that gets loaded as needed basis, so that future database reads/writes will happen to the cache as opposed to disk (db writes)?
2. Is SQL Server 2005 recoverable in such configurations?
3. Are there any ideas/resources where I can get more details? (Such as sample configurations with bench mark numbers, rpevious experiences..etc)
Thanks
Murthy
Reads / Writes Per Second.
Oct 30, 2006How can You find the reads and writes per second of your hard drives in sql. I am reading my SQL book and it says that your average disk should have 125 or less i/o's. And it gave the forumal but as mentioned I don't know how to find the reads and writes.
View 4 Replies View RelatedCOUNT Of READS And WRITES On A 6.5 Db.
Jul 21, 2000Is there a way to get a total count of all SELECT, UPDATE, DELETE and INSERT statements to a SQL Server 6.5 database during a 12 hour period? I'm thinking maybe someone knows of a software that reads the log or monitors the server... I've been looking at the performance monitor and, although it has good information, it doesn't capture DML's.
FYI - it's for capacity planning.
TIA,
Mike
Track Reads And Writes
Mar 5, 2008GUys,
Is there any way track tables which have most no of reads and writes from a database of 400 tables.
Thanks
Checking For Dirty Reads/writes
Apr 17, 2008
Problem Statement........
Lets say user A accesses a record and is making an update to a column... next user B accesses the same record and makes an update to the same column and saves the data... how can user A check to see if an update has been made to prevent overwriting the data..
Is there a query statement that user A can write to check for this?
I understand locking can be used to prevent this but is there an alternative to locking.
How To Make Sure No Other Table Writes Happen Between 2 SQL Statements ?
Nov 25, 2007Ok, here is my situation.....
When someone navigates to a user's profile page on my site, I present them with a slideshow of the user's photos using the AJAX slideshow extender. I obtain the querystring value in the URL (to determine which user's page I'm on) and feed that into a webservice via a context value where an array of photos is created for the slideshow. Now, in order to create the array's size, I do a COUNT of all of that specific user's photos. Then, I run another SQL statement to obtain the path of those photos in the file system. However, during the time of that first SQL query's execution (the COUNT statement) to the time of the second SQL query (getting the paths of the photos), the owner of that profile may upload or delete a photo from his profile. I understand this would be a very rare occurrence since SQL statements 1 and 2 will be executed within milliseconds of each other, but it is still possible I suppose. When this happens, when I try to populate the array, either the array will be too small or too large. I'm using SqlDataReader for this as it seems to be less memory and resource intensive than datasets, but I could be wrong since I'm a relative beginner and newbie. This is what I have in my vb file for the webservice.....Public Function GetSlides(ByVal contextKey As String) As AjaxControlToolkit.Slide() Dim dbConnection As New SqlConnection("string for the data source, etc.") Try dbConnection.Open() Dim memberId = CInt(contextKey) Dim photoCountLookupCmd As New SqlCommand _ ("SELECT COUNT(*) FROM Photo WHERE memberId = " & memberId, dbConnection) Dim thisReader As SqlDataReader = photoCountLookupCmd.ExecuteReader() Dim photoCount As Integer While (thisReader.Read()) photoCount = thisReader.GetInt32(0) End While thisReader.Close() Dim MySlides(photoCount - 1) As AjaxControlToolkit.Slide Dim photoLookupCmd As New SqlCommand _ ("SELECT fullPath FROM Photo WHERE memberId = " & memberId, dbConnection) thisReader = photoLookupCmd.ExecuteReader()
Dim i As Integer For i = 0 To 2 thisReader.Read() Dim photoUrl As String = thisReader.GetString(0) MySlides(i) = New AjaxControlToolkit.Slide(photoUrl, "", "") Next i thisReader.Close() Return MySlides Catch ex As SqlException Finally dbConnection.Close()
End Try
End FunctionI'm trying to use the most efficient method to interact with the database since I don't have unlimited hardware and there may be moderate traffic on the site. Is SqlDataReader the way to go or do I use something else? If I do use SqlDataReader, can someone show me how I can run those 2 SQL statements in best practice? Would I have to somehow lock writing to that table when I start the first SQL statement, then release the lock after I execute the second SQL statement? What's the best practice in this kind of scenario.
Thanks in advance.
After Upgrading To SQL 7.0 Database Writes/saves Are Slow...
Apr 18, 2002I upgraded from 6.5 to 7.0 SP3. Now when I save (write) an invoice it takes about 10-12 seconds, at 6.5 it was 1-3 seconds. SQL Server and my Materials App are the only thing running on this box. This is the only area that has gotten slower everything else works great. I have 3 users saving invoices and about 15 people total using the system at one time. It's a compaq DL580 loaded with memory, database is 2,195MB in size. Same 6.5 client to access system as before. Should I rebuild/reindex the database? Is there something from the old 6.5 version I need to remove?? Thanks in advance!!!
View 1 Replies View RelatedGot An Expensive Server, SQL Is Very Slow On Writes
Feb 2, 2004Hi,
i am experiencing SQl write performance problems on a very shiny server. Got data files on a Raid 1+0, log files on a separate drive, all SCSI, Win2003 server, 6G RAM, 2 Xeon processors. I've created a small benchmarking program and run it on my desktop pc and this 'big' server. Here are the results:
Desktop: SQL server inserts: 78 Seconds, Direct writes to the harddisk(Just write a string to the file 10000 times): 13 seconds
SQLServer: SQL server inserts: 422 Seconds, Direct writes to the harddisk: 16 seconds
So, for some reason, my 'shiny' machine is 6 times slower on writes than my desktop. When i tried comparing the select performance, my shiny server is 10 times faster than my desktop.
Initially i had Raid5 on my server and it had poorer direct write performance but now, direct writes seem to be ok, so, i recon this is a problem related to SQL server.
What can i do to improve the insert performance?
Thanks in advance
Deploy To Production Server / SSIS Writes Out Garbage Data
Apr 2, 2015I built a SSIS(writing out to a flat file ) in 32 bit machine and it woks fine . But however when I deploy to the produciton server(64 bit) the SSIS writes out garbage data . After some research I found out that the problem with the 32 bit OS and 64 bit OS problem.What is my next step. Am I out of luck that now I will have to redesing the SSIS in 64 bit?
View 5 Replies View RelatedSQL Server Admin 2014 :: Backing Up To Mount Point - Perfmon Shows Zero Writes
Apr 20, 2015Im backing up to a network directory thats actually a mount point on a different server.My backup was slower than usual so i opened up perfmon to have a look.
When selecting the mount point from the Logical Disks section in perfmon i can see that writes/sec & write bytes/sec both show zero for a long period of time, even though the backup percent complete is increasing.Then all of a sudden the writes to the network share jump massively.
Is there some caching mechanism for backups in sql where during a backup data is only flushed to the disk periodically during backup?
Log Reads In SQL Server 2005
May 31, 2006I have a set of triggers that log the history of changes to a table - i.e. I record inserts, updates, deletes (pretty standard audit stuff I suppose). I want to also log reads on that data. If I were using sprocs for reading data, this would be relatively painless, but I am using an O/R mapper to handle my data access, which writes dynamic sql at runtime (and I don't want to use sprocs with it) and then sends it down to the DB. Is there a way I can intercept reads and log them to the same table I am logging other actions? I know very little about the new capabilities of SQL Server 2005, but I would think I could somehow, maybe via the new CLR capabilities or similar, get access to these types of events within the database? Anyone? I know I could always do this higher up in the application layers, but I would like to keep all of this at the database level if possible....Thanks,
View 1 Replies View RelatedSQL Server Admin 2014 :: How Data Writes In Multiple Secondary Files If There Is No Filegroup Created
Nov 12, 2014I read , When sql server Database having multiple data files within single filegroup then sql server writes data in multiple proportional file algorithm where the amount of data written to a file is proportionate to the amount of free space in that file, compared to other files in the filegroup.
so if there is no filegroups created and multiple secondary files are attached in databse , is there same way data stored and writes data in multiple files by the same algorithm or any different way.
Can REPLICATION On SQL Server 2000 Allow Dirty Reads
Dec 1, 2005All my queries are being blocked while the tables are being replicatedand it is causing some 2 minute blocking. Is there a way for theReplication to allow dirty reads because I really don't care aboutthat, I would rather have dirty reads than 2 minute waits.Thanks.
View 1 Replies View RelatedSQL Server 2005 Large IO And Logical Reads
May 22, 2008A table in one of my databases is running very slowly. The IO is very high and below is a printout from the SET STATISTICS IO ON command run on a common query used on the table:
(4162 row(s) affected)
Table 'WebProxyLog'. Scan count 3, logical reads 873660, physical reads 3493, read-ahead reads 505939, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0.
I have a clustered unique index and a nonclustered index on the table. I have ran SQL Profiler and opened the trace in Database Tuning Advisor, DTA displays 0% improvement suggestions. I have a number of statistics on the table and index which are all up to date and fragmentation is less than 1%. I've tried a number of variations on indexes to improve performance but to no avail. There is only one query which runs on the table, and the nonclustered index created on the table did significantly improve performance, however the query still runs at around 23 seconds. The query does bring back a large amount of data however i'm sure there is a way to bring down the IO and logical reads to improve performance.
The table and index scripts are below:
Code Snippet
-- =================== Table and Clustered index ===========================
CREATE TABLE [dbo].[WebProxyLog](
[ClientIP] [bigint] NULL,
[ClientUserName] [nvarchar](514) NULL,
[ClientAgent] [varchar](128) NULL,
[ClientAuthenticate] [smallint] NULL,
[logTime] [datetime] NULL,
[servername] [nvarchar](32) NULL,
[DestHost] [varchar](255) NULL,
[DestHostIP] [bigint] NULL,
[DestHostPort] [int] NULL,
[bytesrecvd] [bigint] NULL,
[bytessent] [bigint] NULL,
[protocol] [varchar](12) NULL,
[transport] [varchar](8) NULL,
[operation] [varchar](24) NULL,
[uri] [varchar](2048) NULL,
[mimetype] [varchar](32) NULL,
[objectsource] [smallint] NULL,
[rule] [nvarchar](128) NULL,
[SrcNetwork] [nvarchar](128) NULL,
[DstNetwork] [nvarchar](128) NULL,
[Action] [smallint] NULL,
[WebProxyLogid] [int] IDENTITY(1,1) NOT NULL,
CONSTRAINT [pk_webproxylog_webproxylogid] PRIMARY KEY CLUSTERED
(
[WebProxyLogid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
-- =================== Nonclustered Index ===========================
CREATE NONCLUSTERED INDEX [dta_ix_WebProxyLog_Kaction_clientusername_logtime_uri_mimetype_webproxylogid] ON [dbo].[WebProxyLog]
(
[Action] ASC
)
INCLUDE ( [ClientUserName],
[logTime],
[uri],
[mimetype],
[WebProxyLogid]) WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
-- =================== Query which is called regularly on the table ===========================
SELECT [User] = CASE
WHEN LEFT(clientusername,3) = domain' THEN RIGHT(clientusername,LEN(clientusername) - 3)
ELSE clientusername
END,
logtime AS [Date],
desthost AS [Site],
uri AS [Actual Site]
FROM webproxylog
WHERE CONVERT(Datetime,CONVERT(VarChar(25),logtime,106),106) BETWEEN '20 apr 2008' AND '14 may 2008'
AND(RIGHT(uri,4) NOT IN('.css','.jpg','.gif','.png','.bmp','.vbs'))
AND (RIGHT(uri,3) NOT IN('.js'))
AND LEFT(mimetype,6) = 'text/h'
AND (uri NOT LIKE '%sometext.local%')
AND (uri NOT LIKE '%sometext.co.uk%')
AND [action] = 9
AND (clientusername IN ('USERNAME'))
ORDER BY logtime ASC;
PS There are 60,078,605 rows in the table
Please help!
Many Thanks
SQL Server 2012 :: Summing Logical Reads Each Day For A Server
Oct 2, 2014We would like to benchmark our logical reads daily to show our improvement as we tune the queries over time.
I am using sys.dm_exec_query_stats summing the Physical and Logical Reads. Is this a viable option for gathering this metric? Is this a viable metric to gather?
select sum(total_physical_reads) as TotalPhyReads, sum(total_logical_reads) as TotalLogReads from sys.dm_exec_query_stats;
How best to provide performance based metrics.
SQL Server Admin 2014 :: Why Number Of Reads Increases During Insert Test
Jun 2, 2014I am writing a performance baseline test.
The first test writes 5000000 rows in one table. I realise this is not representative OLTP behaviour, but it worked me to start interpreting performance counters and to test several setups to be discussed with our server, storage and network administrators. This way we have been able to compare the results of different hard disks, Lun vs vmdk, 1GB vs 10GB network, AMD vs Intel, etc. This way I can also compare several SQL setups (recovery model, max memory config, ...)
The screenshot shows the results of 2 runs on the same server : Win2012R2, SQL2014, 16GB RAM.
In test 1 min/max server memory was set to 9215MB/10751MB
In test 2 min/max server memory was set to 13311MB/14847MB
The script assures the number of bytes inserted in the nvarchar columns is always the same.
This explains why the number of pages and the number of MB in the table are the same at the end of the 2 tests (column 5 and 6)
Since ca 13GB has to be written, the results of test 1 show the lead time is increasing once more than 10GB has been inserted (column 8 and 9) In addition you can see at that moment
- buffer cache hit ratio is decreasing
- page life expectance becomes "terrible"
- free list stall/sec increases
- lazy writes/sec increases
- readlatency increases (write latency does not)
In test 2 (id 3 in column 1 in the screenshot) those counters are not really influenced (since the 5000000 rows can all be stored in memory).
Now what I do not understand is :
Why the number of pages read (instance level) as well as the number of bytes read and the number of reads (databaselevel) is increasing extremely during run 1.
I expected to see serious impact on write behavior, since SQL server is forced to start flushing dirty pages once memory is filled. Well actually you can see here the number of writes (not the the number of bytes written) starts to increase faster in test 1 after 4000000 rows, but there's no real impact on write latency.
Finally I want to notice
- I'm the only user on this machine
- the table has a clustered index on a identity column
- there are no foreign key constraints
- inserts are executed using a loop, not one big transaction
- to monitor progress and behaviour/impact, each 10.000 loops the counters are stored using dmv queries
So I wonder why SQL Server starts to execute so many reads in test 1.
SQL Server 2014 :: Profiler Reads Column Incorrect For Parallel Plans?
Aug 19, 2015I often use profiler as one tool to identify bad plans. The reads column gives me a good indication of excessive IO to dig into and correct if necessary. I often use it with Showplan so I can see what a query does, replicate it and fix it.
However I have just lost some faith in it. I am looking at a poorly performing query joining five tables. A parallel plan has been generated and one table is being scanned (in parallel) due to a missing index. This table had in excess of 4 million rows in it. The rest hitd indexes well. However the entire query generates ONLY 12 READS.
Once corrected, a single processor plan is used. This looks really efficient and uses 120 reads. That looks the right figure to me.
Clearly 12 reads is wrong. Does the profiler only display one thread of a parallel plan perhaps? Or something else?
Do Indexes Help Writes?
Sep 26, 2005I have an application that is insertting thousands of records houlry. The server's hard drives are staying maxxed out. My boss says there is an index problem. I say it is a drive subsystem issue.
Any help would be appreciated to understand this performance problem.
Writes Are Not Commited Right Away
Mar 25, 2008Hi!
First of all I want to tell you that I'm not a dba or tuning expert but I've ran a trace on a database with perfomance problems and I've found a strange thing.
The user creates orders for their service people in the organisation. I can see in the trace that inserts are done but they don't produce any writes rightaway. However after 10-15 minutes all the writes are done, what could make the actual write be delayed so much. The application is developed using .net.
/Magnus
Jesus saves. But Gretzky slaps in the rebound.
Too Many Writes At Once Causing Time Outs?
Feb 18, 2004Hi everyone! I'm new to this forum and I suspect I'll be using this forum frequently. Good stuff.
Allow this question may appear to be Web-related, I think the problem is with what I'm doing with the database. Please read.
I'm trying to implement a page tracking solution using ASP and SQL 2000. It basically writes a new record to a table every time a user visits a page on the site. It appeared to work fine at first, then I've increasingly been getting time out errors on my pages -- all pointing to the include file that fires the database write.
Here's the code that's referenced on every page:
Set Conn = Server.CreateObject("ADODB.Connection")
Conn.Open "dsn=x;uid=y;pwd=z;"
Set objRecordset1= Server.CreateObject("ADODB.Recordset")
objRecordset1.Open "SELECT * FROM table",Conn,1,2
objRecordset1.AddNew
objRecordset1.Fi elds("PAGE") = Left(request.servervariables("SCRIPT_NAME"),100)
objReco rdset1.Fields("QUERY_STRING") = Left(request.servervariables("QUERY_STRING"),100)
objRec ordset1.Fields("DATE") = Date()
objRecordset1.Fields("TIME") = Time()
objRecordset1.Fields("PLATFORM") = Left(request.servervariables("HTTP_USER_AGENT"),100)
obj Recordset1.Fields("REFERRER") = Left(request.servervariables("HTTP_REFERER"),100)
objRec ordset1.Fields("USER_IP") = Left(request.servervariables("REMOTE_ADDR"),20)
If Request.Cookies("TEST")("ID")<>"" Then
objRecordset1.Fields("VISITOR_ID") = Request.Cookies("TEST")("ID")
End If
objRecordset1.Update
Conn.Close
Set Conn=Nothing
%>
After taking out the reference to the above code everything speeds back up. So, I know the performance hit and time out issues have to do with the code above.
Is it the simultaneous write to the table, the constant opening and closing of the recordset, the cursor type, the lock type – or combination of things?
HELP!! Thanks!
David
Large Binary Writes Slower Than Expected
Jul 23, 2005Hello, we are investigating the use of SQL Server as a backend to ourscientific imaging application. We have found that when we write alarge image (60 Megabytes) the performance is quite a bit slower thanwriting 60 single megabyte images. The tests were performed runningSQL Server 2000 on Windows 2003 Enterprise on a single machine toeliminate the network's contribution. Perhaps there is a configurationoption that will allow us to tune SQL Server to better handle largewrites?TIA
View 1 Replies View RelatedHow To Avoid That My Application Writes To Windows' EventLog?
Oct 25, 2006Hi everyone,
Every time that my application throws an .DTSX file I don't know who or what is writing on eventviewer.application if failed or successful.
Execute method implements a customized class which implements IDTEVENTS but I promise that in any place of my code I'm writing that information.
app.execute(nothing,... MYEVENTS)
Public Class MYEVENTS
Implements IDTEVENTS
..
..
..
..
All the methods are declared although empty but OnQueryCancel which is customized.
How to disable this behaviour?
I'm concerned for that because of we could launch (when it's gonna in live) 300 or 400 packages on-daily basis!!!
Thanks in advance and regards,
Looking For A Good Example Of A Script Task In The Dataflow That Writes To A File
Jul 4, 2006I need to write back to a legacy system in the form of flat file --the first row would be a header and the remaining rows would be the actuals rows of data--each field would have a column delimiter of , and a row delimter of CRLF.
The source is a SQL Server 2005 table.
Im looking for a good example of a script task in the dataflow section that writes to a file.
Can anyone show me the code how to do this or point me to a link.
thanks in advance
Dave
My Error Handler Writes Duplicate Messages To Email!
Aug 22, 2007I am using an error handler that was provided to me from another source. However, I notice that there's something in the code that writes the error message twice. I tried to discover what it was, but could not seem to pinpoint it. Here's an example of what my email messages look like:
Is activity file current?
The Script returned a failure result.
The extracts in D:myFolder are not current! Data NOT loaded.
Is activity file current?
The Script returned a failure result.
The extracts in D:myFolder are not current! Data NOT loaded.
Obviously, I just want my email to read:
Is activity file current?
The Script returned a failure result.
The extracts in D:myFolder are not current! Data NOT loaded.
Somewhere, errorMessages is being written to more than once. Need help finding the error.
Thanks!
Here is the code from my Event Handlers:
OnError event:
Public Sub Main()
Dim messages As Collections.ArrayList
Try
messages = CType(Dts.Variables("errorMessages").Value, Collections.ArrayList)
Catch ex As Exception
messages = New Collections.ArrayList()
End Try
messages.Add(Dts.Variables("SourceName").Value.ToString())
messages.Add(Dts.Variables("ErrorDescription").Value.ToString())
messages.Add(Dts.Variables("scriptError").Value.ToString())
Dts.Variables("errorMessages").Value = messages
Dts.TaskResult = Dts.Results.Success
End Sub
On PostExecute:
Public Sub Main()
Dim errorDesc As String
Dim messages As Collections.ArrayList
Try
messages = CType(Dts.Variables("errorMessages").Value, Collections.ArrayList)
Catch ex As Exception
Return
End Try
For Each errorDesc In messages
Dts.Variables("emailText").Value = Dts.Variables("emailText").Value.ToString + errorDesc + vbCrLf
Next
Dts.TaskResult = Dts.Results.Success
End Sub
Select Data From Table In One Database Server While Connected To Another Database Server.
Dec 18, 2007
Hi,
Is there a way in SQL Server 2005 to use a select statement to fetch data from a table in another Server while running the query in one Server.
Like using a database Server Link in oracle...
Thanks
Pramod
Many Reads
Mar 25, 2008Hi!
I was assigned to solve performance problems for an application. I fired up Sql Server profiler and started a trace. Downloaded Sql Server Trace Analyzer. It's a trial version so it's very limited. What I found is that one stored procedure generates almost 400 000 reads everytime it's used and it's used everytime the user wants to see his orders. I've tried to translate the t-sql to english from swedish, it looks something like this:
select top 100
o.orderid,
o.name,
o.latestdeldate,
os.name as OrderStatus,
os.orderstatusID,
p.placeID,
p.name as place,
p.address,
p.city,
a.name as worktype,
noOfActions=(select count(*) from actions a where a.order_orderid=o.orderid),
noOfServiceObjects = (select count(*) from Serviceobject s, Actions a where s.Place_PlaceID = o.Place_PlaceID and a.order_orderid = o.orderid and a.Serviceobject_serviceobjectid = s.serviceobjectid),
...
...
...
It has 8 select count(*) in the select statement then in the where statement it has 2 more select count(*).
I know it's very difficult for you to come up with a solution but do you know a better way than to use select count(*) everywhere? The count is used for to show different status flags on the website.
/Magnus
Jesus saves. But Gretzky slaps in the rebound.
Dirty Reads
Aug 1, 2001If I'm doing a dirty reads and a someone updates a record when I'm trying to read it is it possible to read both the old and new records thereby retrieving two records?
View 2 Replies View RelatedReads, Clustering, Etc
May 1, 2008server: QAT on clustering server ----> 23 seconds
----------------------------------------------------
SS 2000 developer edition SP4
win NT 5.2 (3790) SP4
MeM 7935 MB
processors 4
root directory C:program files...
use a fixed memeroy size 640 MB
reserve physical memory for sql server
minimum query memory 1024 kb
use all available processors
minimum query plan threshold for considering 5
PROFILER READS = 5234
server: MILLER ----> 3 seconds
----------------------------------------------------
SS 2000 developer edition no service pack
win NT 5.2 (3790) SP4
MeM 2047 MB
processors 4
root directory f:MSSQL$INAQAT
dynamically configure sql server memory
use all available processors
minimum query plan threshold for considering 5
PROFILER READS = 598
----------------------------------------------------
Making story short. I got an application that hits only 1 database called RECORDS. I'm getting different duration when running an application. 23 and 3 seconds.
Same database, same objects and same application.
SERVER QAT is our staging server, means lots of databases
SERVER MILLER is just a server i just assembled, means just one database (RECORDS).
Not sure if it's because it's a clustering server that is causing the issue nor the reads. If its the reads, what is causing it? Do you think is the how the memory is configured?. Will the experts pls stand up?
More Reads Then Expected
Jul 18, 2006So I€™m at a dead-end looking for the reason behind the following behavior. Just to make sure no one misses it, the 'behavior' is the difference in the number of reads between using sp_executesql and not.
The following statements are executed against a SQL 2000 database that contains >1,000,000 records in the act_item table. They are run using Query Analyzer and the Duration and Reads come from SQL Profiler
SQL 1:
exec sp_executesql N'update act_item set Priority = @Priority where activity_code = @activity_code', N'@activity_code nvarchar(40),@Priority int', @activity_code = N'46DF335F-68F7-493F-B55E-5F9BC6CEBC69', @Priority = 0
Reads: ~22000
Duraction: 250-350 ms
SQL 2:
DECLARE @Priority int
DECLARE @Activity_Code char(36)
SET @Priority = 0
SET @Activity_Code = '46DF335F-68F7-493F-B55E-5F9BC6CEBC69'
update act_item set Priority = @Priority where activity_code = @activity_code
Reads: ~160
Duration: 0 ms
Random information:
Activity_code is an indexed field on the table, although it is not the primary key. There are a total of four indexes on the table, none of which include the priority as one of the fields.
There are two triggers on the table, neither of which is executed for this SQL statement (there is an IF UPDATE(fieldname) surrounding the code in the trigger)
There are no foreign relationships
I checked (using perfmon) to see if a compilation/recompilation was happening. No it's not.
Any suggestions as to avenues that could be examined would be appreciated.
TIA