Report Builder Icon Is Not Showing Up On The Report Manager Home Page
Feb 1, 2007
HI, there,
I added a new windows user "ReportUser" which is a local user (not in administrator group). When I connect to the report manage's web page, I use reportuser to log in (when the anonymous access is disabled it will ask a log in). Report builder icon is not showing up on the report manager home page.
If I log in as a user in administrator group, the reportr builder icon shows up so I can download it and build report.
I have assigned reportuser "Content manager" and "repoter builder" access to the home folder. Is there anything else I have to do to make the report build icon show up on the home page?
Is it possible to add hyperlinks to the Report Manager Home Page that link to other aspx pages? I have created some associated data entry aspx pages that I want to enable access to from the Report Manager Home Page (if possible).
I have Reporting Services 2005 installed on my Windows XP machine. I can access the Report Manager home page with the built-in Administrator account. However, my own account, which is a member of the Computer Admin group, is denied access with a 401.3 error. The 401.3 seems to be access denied due to not being on the ACL. I am using simple file sharing. What should I do to give access to my own account?
First off, forgive the ignorance that I'm sure to display in this post. I'm a total newbie with SRSS and have been using it to follow along with the tutorials offered via the SQL Express website. I'm using it strictly for learning on my local machine for the time being.
All had been working well with Reporting Services until I upgraded Vista Ultimate 64-bit (which was running in free 30-day trial unactivated Evaluation mode) sideways to Vista Ultimate Upgrade Edition 64-bit Edition. (Sounds confusing, I know.) I also subsequently installed a SQL Server 2k5 critical update which was recommended by Windows Update.
Now when I attempt to access Report Manager via localhost the "Home page" is incomplete, showing only the SSRS "Home" page header. There are no properites, data sources, config options, etc. outside of links for "Home|Help". I am running IE as an Admin and all the Reporting Services Configuration settings are green.
Also, when I attempt to deploy from VS 2005 I now receive the error: "Permissions granted to user 'NT AuthorityNetwork Service' are insufficient ..."
Some of the settings inside the Report Sever Config are as follows:
Windows Service Identity:
Service Acct: NT AuthorityNetwork Service; Built-in Account: Network Service
Web Service Identity:
Asp.net Service Account; NT AuthorityNetwork Service; Report Server and Manager are both using Classic.Net AppPool
I've attempted for hours to weed through Google and this forum but have repeatedly wound up back where I started and more confused than when I started. I would deeply appreciate any help in resolving this matter.
I recently updated my instance of SQL Server 2005 express to install reporting services. I am able to navigate to the report manager url but the report builder button is missing. Also, when I go to the report manager url, It prompts me for the server's username and password. Does anyone know how I can fix this?
Just wanted to know if this is normal. Here's my situation.
I'm using the SQL Server Express 2005 with Advanced Services.
When I go to my Report Manager page, http://localhost/reports$sqlexpress, I don't see any link for report builder. I've read some articles that I should be able to run the Report Builder from here. Maybe I read it wrong or something?
Also, since I don't have the link, I would have to type the complete URL for the report builder, http://localhost/reportserver$sqlexpress/reportbuilder/reportbuilder.application . It runs the application fine. Then when I try to enter the Site or Link, which is http://localhost/reportserver$sqlexpress/, I get an error on the Get Started Panel saying "Report Builder and Report Models" is not supported in this edition of reporting services."
Does it really not support Report Builder and Report Model if I'm using SQL Server Express 2005 with Advanced Services?
I'm trying to get empty cells from an OLAP cube to display in a report designed using the Report Builder. Of the three report types, only the Table report shows the empty cells. Is there any option/setting that I need to enable to get this to work for the Matrix or Chart reports? Something like the "Show Empty Cells" option that is available in the pivot table used by BI Dev Studio?
I have used Report viewer control to show ssrs 2005 report in my aspx page. Can we show the SSRS 2005 report on the aspx page in any other way? any info on this is appreciated.
When I deploy a report, and then browse to it with FireFox, I only see 2 inces of the report. I can scroll through the entire report, but only see the 2 inch window's worth at any time.
Its like the html element the report gets put into has a hard coded height, and doesnt auto size to show the eintire report.
Hi How to bring Report builder in the Ui of .net aspx pages? I tryed withe the .exe but it is comming with a new process and come up with new IDE of Report builder, i donot required this, I want it should come up within the Aspx page itself.
I am using reportitem to show the data in the header from a table cell.i see the values just on the first page, from second page onwards reportitems not showing the values at all.
I am getting the reportitems values from a tables header cell and also made the tables header cell's property checked repeat header in all pages.
Header is appearing but the values in reportitems are not populating from page 2 onwards.
i tried / used everything including inserting group header still i don't get it towork.
I have a dataset for report builder 3 that has 8 fields. The data for the report needs to be grouped by the first field. The 2nd field is a string that describes the group field and this too needs to be on the same row as the group field. This 2nd field need nearly the full page width. The remaining 6 fields need to end up rendering below the first row. I can't figure out how to get report builder to put the first 2 fields on the first row and use the full page width.
We are currently having an issue with a Reporting Services deployment which is being accessed through Tivoli Access Manager (with a custom SSRS security extension).
When you try to launch Report Builder, we receive the following error when ClickOnce tries to validate the deployed app (Report Builder works fine when accessed outside of the Tivoli Access Manager environment):
ERROR DETAILS Following errors were detected during this operation. * [20/03/2008 2:49:35 PM] System.Deployment.Application.InvalidDeploymentException (HashValidation) - File, ReportBuilder.exe, has a different computed hash than specified in manifest. - Source: System.Deployment
Can anyone shed any light on what might be causing this?
All of the components (including the manifest) are downloaded to the client correctly so the authentication seems to be working and it works outside of TAM so there is no issue with the files on teh server having changed etc. either.
I have installed the Sql Server 2005 reporting services and I see that two default directories being created in IIS (Report and ReportServer..). For some reason, if I type http://localhost/reports, I am unable to see the report manager homepage. Can anybody suggest me if I need to configure any more stuff to see the report manager?
I enabled the anonymous authentication and still cannot see....
I can see the webservice however by typing http://localhost/reportserver...
is it possible to separate Grand Total of a sub group to a new page?
I tried using advanced mode, find the first line the Grand Total section and set its "RepeatOnNewPage" to true, but, when I execute the report, it will throw an error something like the value of RepeatOnNewPage of the TablixMemeber must be the same as its previous object.
I need my report pages to separate by subGroup(SubGroupA, SubGroupB, A+BTotal).
When viewing reports in Report Manager, I can't keep a consistent view. Some reports are on several pages, requiring the move to the next page, and some just appear as one long report to scroll down through. I cannot find any difference in the reports to indicate what causes that. I had posted this question before, and thought I had found the answer (moving info out of the table header and putting it in a group header) that only worked on one occasion and I still have inconsistent reports. Does anyone have an idea why this is happening?
I don't have page breaks set on any groups in these reports, at least none that I am aware of. I have checked one against the other to see if I can find any difference, but nothing as yet.
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
After I use the report builder to create a generic report, how do I actually get that report into the report designer so that I can modify it more effectivly?
The issue that I have now is that the file on the report server is not a .rdl file and if I simply save it as one and then bring it into VS to modify it the code file is a html structure rater than a XML file type.
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
I have uploaded a html-page to the Report Manager, the html-page has a img-tag with a src="Picture1.png" in it. The image is then uploaded to the same folder as the html-page. When I browse the html-page the image is not found, red cross, does anyone know why this happens?
Hi all. My name is Guilherme and I'm a Braziliam software developer.
I've installed on my computer all the software required to work with MS SQL RS. I log on this computer using my domain user. and a few days ago i needed to change my password (network policy)
Now, when I open the adress http://localhost/reports on my computer, I can't see the installed reports, neither the configuration page.
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports Report that links to another report Both reports return more than one page Reporting Services installed Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
I want to use this as the data from which to build a report model. As linked servers don't show up in the Data Source View wizard, I created a view in SQL Server:
create view MyExcel as select * from XL_SPS_1...Sheet1$
Okay, great, now the view shows up in the DSV wizard and I can create the data source view. However, when I create a new report model based on this data source view, the Report Model Wizard tells me at "Create entities for all tables" that I've got an error when it processes dbo_MyExcel that "Table does not have a primary key."
I assume this is where the identifying attributes for the entities in the report model are taken from, so I really can't go further. Does anyone have an idea as to how to add a primary key to a linked server (Excel) in SQL 2005? Can this be done? Other than importing spreadsheet data to a SQL table, how can I get around this?
We have a remote business client who has a proxy server setup and this translates into receiving a 407 proxy authentication blocking error when attempting to download the report builder application for deployment off the report server which is housed locally with us. The proxy server does not allow them to download application type files off another site. At the moment, they would not like to disable the proxy for these users to allow them to deploy the application on their client or add the report server as a trusted site. Is there a method by which Report Builder can be locally installed on the client pc instead of online only with it knowing the correct report server to access and then still launch correctly when the report builder button is pressed through report manager?
I am not a web application guru by any means and we have tried to replicate the oneclick deployment and what occurs in the local settings/apps/2.0 subdirectories, but the application still attempts to download/install again. If we attempt to just launch the local executable on the client, report builder assumes the client pc (localhost) is the report server to access. Is there a method which will succeed?
I have installed SQL Server Reporting Service on window xp. everything working fine except one thing.
I have installed sql server with my a/c. my a/c have admin rights. when i giving http://dineshpatel/reports it is displaying page but Report Builder and other option are not displaying. I hope i don't have admin rights.
I have checked with local administrator login also but same problem.
what additional setting are require for admin rights?
I have a report builder drill down report. I have row groups with totals. It looks like the attached. The problem is when the report is not expanded the Grand Totals column is not accurate... it is displaying the totals of one of the rows when expanded.The expression in the Total Show text box is
