I want to write a conditional where clause in SSRS query, such as
WHERE CASE WHEN @para = 1 Then Column1 Like '%%'
WHEN @para = 2 Then Column1 IN (@NameList) END;
What's the correct syntax to write the conditional where clause?
I have below query which is working fine in SQL but if i use same query in SSRS dataset then it is not working at all.If i put only one condition in where clause then it works but if i put multiple conditions then it does not works in SSRS and through error "data is not available".
SELECT id,
DATEDIFF(DAY, Created, BMTRequestReviewDate) AS 'EvaluateDays',
all code goes here
FROM [dbo].[SBWT_Data]
WHERE
upper(Status) not like '%XX%'
AND upper(Status) not like '%DELETED%'
upper(Status) not like '%CLOSED%'
---OR
WHERE Status NOT IN ('90 - Closed','XX - Rejected','XX - Request Rejected','XX - Deleted')
As you can see in code i have tried with both where conditions but it is not working. It seems that SSRS does not supports multiple conditions for same field.
Table : incident
----------------
incident_id usr_id item_id Inc_Date
10059926 191 61006 8-22-2015
10054444 222 3232 6-7-2015
Table: act_reg
--------------
act_reg_id act_type_id incident_id usr_id act_type_sc
454244 1 10059926 191 ASSIGN
471938 115 10059926 191 TRAVEL TIME
473379 40 10059926 191 FOLLOW UP
477652 115 10059926 191 TRAVEL TIME
489091 504 10059926 191 ADD_ATTCHMNTS
477653 504 10054444 222 ADD_ATTCHMNTSParameter: @attach (value=1, Label=Yes & Value=0, Label=No)
Result (While I am selecting 'Yes' in dropdown)
----------------------------------------------
incident_id usr_id item_id
10059926 191 61006
10054444 222 3232
SELECT incident.incident_id,incident.usr_id,incident.item_id
FROM incident
where exists (How i can write query here to check the act_type_sc=ADD_ATTCHMNTS is exists)
I am using the following function to set the time format, however I now need to to add an IF statement into this equation.This is the current expression I am using:
=Floor(Fields!ACD_Calls.Value / 3600) &":"& Format(DateAdd("s", Fields!ACD_Calls.Value, "00:00"), "mm:ss")
Now I need to use the following expression with this:
=IIF(Parameters!ReportType.Value="Average", Sum(Fields!ACD_Calls.Value)/CountRows(), Sum(Fields!ACD_Calls.Value))
How do I join the two together?
I need to run a different select statement based on the value of a parameter. Visual studio is not liking how I am formatting it.
SELECT mc.CtrlID, mc.PrtfID, mc.PrtfTyp, mc.City, mc.STATE, mc.U_O_AND_M, mc.CHBBal, mc.IRG_Number, mc.PrtfName, mc.LnID, mc.UPB, mc.UPB_Master_Loan, aa.Prtf_FNMA_FHLMC_Other , aa.ReportingSummar
FROM vw_XXX_GIAC mc
INNER JOIN vw_XXX_InvestorMatrix aa on mc.CtrlID = aa.CtrlID
WHERE
case when
@PortfolioID=1 THEN aa.Prtf_FNMA_FHLMC_Other ='FNMA'
@PortfolioID=2 THEN aa.Prtf_FNMA_FHLMC_Other ='FHLMC'
@PortfolioID=3 THEN aa.Reporting Summar ='FLOW'
END
Hello--I do not know if this group can help me with SQL Server Reporting Services ... but here it goes. I have a report built on a query and I want to be able to send a parameter (@theWhere) that is a string which is a where clause "(MEGLOMART_TYP_CODE <> 'XYZ' AND MEGLOMART_STAFF_SHORTAGE > 25)" these strings can vary depending on what columns the user selects and what operators they want to use. Generation of proper SQL for the where clause has been verified, I just need to be able to pass these, is there any way to do this...see example query below and how I was planning on using the @theWhere variable...
Thanks!
SELECT DISTINCT SALES_REGION,
SALES_REGION_CODE,
PRODUCT_CLASS_DESC,
MEGLOMART_STORE_ID,
STATE_NAME,
MEGLOMART_TYP_CODE,
MEGLOMART_TYP_DESC,
MEGLOMART_COMMUNITY_POPULATION,
MEGLOMART_PENETRATION_PERCENT,
MEGLOMART_STAFFING_TARGET,
MEGLOMART_STORE_FT_STAFF,
MEGLOMART_STORE_PT_STAFF,
MEGLOMART_STAFF_SHORTAGE,
MEGLOMART_STAFF_TRAINEE_COUNT,
(CASE MEGLOMART_TYP_CODE
WHEN 'MEGA' THEN 'Full Service'
WHEN 'MID' THEN 'Traditional'
WHEN 'MIN' THEN 'Convenience'
ELSE 'Other' END) AS MEGLOMART_TYP_GRP,
(CASE WHEN MEGLOMART_TYP_CODE = 'MEGA' THEN 1
ELSE 0 END) AS MEGLOMART_MEGA_TYP_COUNT,
(CASE WHEN MEGLOMART_TYP_CODE = 'MID' THEN 1
ELSE 0 END) AS MEGLOMART_MID_TYP_COUNT,
(CASE WHEN MEGLOMART_TYP_CODE = 'MIN' THEN 1
ELSE 0 END) AS MEGLOMART_MIN_TYP_COUNT,
(CASE MEGLOMART_TYP_CODE
WHEN 'MEGA' THEN 0
WHEN 'MIN' THEN 0
WHEN 'MID' THEN 0
ELSE 1 END) AS MEGLOMART_OTH_TYP_COUNT
FROM
dbo.MEGLOMART_SNAPSHOT AS theView
WHERE
(PRODUCT_CLASS_DESC = 'Home Furnishings') AND
(NOT (SALES_REGION IS NULL))
AND @theWhere
ORDER BY
STATE_NAME,
PRODUCT_CLASS_DESC
When I use an SSAS cube in Excel the command text is just the name of the cube itself and does not require an MDX query. Is it possible in SSRS to avoid writing an MDX query?
View 3 Replies View RelatedI have one view, i written below query to get employee hierarchy based on orgid and employee name..
If i select employeename it shoukd show employee reporties(under employees and below employee reporties like tree structure)
It is running fast in SSMS Level, but it is taking more time in SSRS(Sql Sever Report Services), If i run this query in SSRS,Some times System not responding.
Declare @OrgId int
Declare @EName varchar(30)
Set @OrgId=56793
Set @EName='ABCD'
Select EmpId
[Code] .....
How to call Boolean/Text parameter in SSRS Query.
Parameter (Cust )Properties:
My Query:
SELECT dbo.incident.incident_ref, Customer.cust_n,incident.date_logged FROM
incident INNER JOIN Customer ON incident.incident_id = Customer.cust_id
WHERE incident.date_logged BETWEEN @date_from AND DATEADD(day, 1, @date_to)
I need to use a condition here to display customer based on my selection in dropdown list (Include ABC )
Is it possible to use a parameter in a ldap query using the ADsDSOObject provider? I keep getting an error "The ICommandWithParameters interface is not supported by the "ADSDSOObject" provider". Command parameters are unsupported with the current provider.
I don't have a linked server on my DB server to Active Directory so I'm just querying in the SSRS report design. Here is my query for my dataset. If I hard code an example it works. Just doesn't work when I pass a parameter. I've tried making it an expression (= sign), Tried several syntax's, Tried everything I can think of. Is this possible? or do I just need to push for a linked server?
="SELECT sAMAccountName, displayName, distinguishedName " +
"FROM 'LDAP://DC=xxxx,DC=xx,DC=xx,DC=xx,DC=xx,DC=xx' " +
"WHERE objectCategory = 'Person' " +
"AND objectClass = 'user' " +
"AND memberOf = '" + @GlobalGroup + "'"
When I click on the DataSet Query Desginer there is an Error Source:.NetSqlClient Data Provider. why this error comes and I have executed the SQL query in SSMS succesfully and the result comes. However this is causing the report from the report manager to fail.
View 8 Replies View RelatedI am creating a SSRS report using a SSAS cube as it data source. The user would like to select multiple values from a reporting parameter that is then used as a filter on the MDX statement. I am bale to have the report work successfully when only one value is selected but not when multiple values are selected; the report uses only the first value from the reporting parameter when it contains multiple values. How do I filter an MDX query using a SSRS report parameter with multiple values?
View 3 Replies View RelatedWe have 1000s of SSRS reports hosted on the SQL 2008 R2. All reports are supposed to have all parameters "hidden". Random reports have been reported to expose the parameter when developers accidently deploy to test servers. Is there a way to identify the reports and the parameter property (Hidden, Visible, Internal) from the Report server Database?
I checked executionlog2 but can not find the parameter property.
Currently we are using Custom Delivery Extension for SSRS 2008R2 We are planning to move it SSRS2012
My Question is: Whether we can use the same Code used for SSRS2008R2 to SSRS2012?
if not what code changes we should do?
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies View RelatedWe've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
* Running SSRS config tool (several times)
* Running with/without the IIS Server Role
* Dropping & recreating the SSRS keys
* Recreating the ReportServer database, etc
* Checking all of the accounts, permissions, etc
* Running SQL Repair
* Going through the registry to fix any references to the machine's old name
* Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
Is it possible to pass a report parameter that is defined as a string to the following SQL statement that is using an "IN" clause ?
WHERE (ANALYST.User_Bemsid IN (@Report_Parameter_Bemsid))
If I pass a single value (I.E. A) it works okay, but once I try to pass multiple values (I.E. A,B or 'A','B') it returns no data.
Using Crystal reports I can pass multiple values via a report prompt into the SQL "IN" clause and seems that SQL Reporting Services should also have this feature. What do I need to do to get it working ?
Thanks for any help...
I have a column in the database that stored moduleId that are seperated by '|' (pipes). For Example: '527|343|454'
I need to add a where clause to a query that pulls the data based on a
ModuleId. For Example: select * from table where 527 in [column above]
Does anyone know how I can do this in a query? Normally I could
use an IN statement, ex: select * from table where 527 in (527,343,454)
How can I get the column in that format?
Thanks for the help in advance,
KM
Hey everyone...I'm completely new to SQL Server and I'm trying to learn the Reporting Services tool. I just installed SQL Server 2005 and selected to install all the options, atleast I'm 99.99% sure I did.
When I go to launch Report Services Configuration, I get "No report servers were found on the specified machine. Details: Invalid namespace". Do I need IIS for this to work?
Also, I do not think the AdventureWorks database was installed, I cannot seem to find it anywhere. I have tried to go back through and reinstall it, but it says that it is already installed.
Also, is there a certain order that you are supposed to install things? i.e. SQL Server before Visual Studios?
Thanks in advance.
*Edit* BTW, I'm using Windows XP, SQL Server Enterprise Edition, and VS.NET 2005.
Is it possible to have my pop up SSRS box size according to the size of the returned value? Issue is, i have a text box that returns a note field and depending on the number of notes, it can and will vary in size. I am currently using this code
="javascript:void window.open(" &"'"& Globals!ReportServerUrl &"/Pages/ReportViewer.aspx?"
&Globals!ReportFolder &"/Patient%20Eligibility&rc:Parameters=False&rc:Toolbar=False
&VPATIENTPROFILEID="& Fields!PatientProfileID.Value
&"
','DetailsWindow','left=300,top=180,width=920,height=455,status=no,menubar=no,scrollbars=yes,location=no'" &
")"
I have created a ssrs report which connects to vertica database through odbc connection. When I try to pass parameter value through parameter (e.g.: column name IN (@parameter) ) then getting error message in query designer prompting "Error in list of values in IN clause. Unable to parse query text. ". Using sql server 2012 , visual studio 2010 version and HP Vertica 7.1 .
View 6 Replies View RelatedI have a requirement to convert reports from Crystal Reports to SQLServer Reports. Is there any tool to do this? or Do I need to redesignevery report in SQL Server Reports?Madhivanan
View 2 Replies View RelatedI am using VS 2010 and the SSRS that came with it. I am sure its SSRS 2008. Anyway, I added a report file to the project, added an ObjectDataSource and connected this to SQLServer 2008, and display the dataset on the report. The report is using ScriptManager, ReportViewer1, and Report1.rdlc file. I preview the dataset and I have multiple row returned. The problem is I only have one row displayed on the report. Maybe I did a quick and dirty report? What setting of properties did I missed?
View 8 Replies View RelatedI have to convert 'While Do' loop logic in Crystal to SSRS. How to use loops in SSRS.
View 12 Replies View RelatedWe are trying to use reporting services to execute a url when the SSRS report is executed. For example when I execute a SSRS report I would like the report to automatically access [URL] (as an example). The reason we are doing this is we want to access another reporting application but record the number and times of access via the reporting services execution tables/views. Is this achievable by putting some code in the Report properties. Can you open - execute url and then close report via some code.
View 3 Replies View RelatedI have a Manager dashbord report.In this report 1st page contains some tables and 2nd,3rd page contains line charts with tables.Actually what we need is in 1st page tables are pretty simple,we need to add kpi's and shown these tables in kpi. kpi in ssrs and how to add kpi in ssrs reports?
View 2 Replies View RelatedI have tried different techniques to design the report but no luck,
1) design staff 5 days schedule as a calendar between two dates and
2)each staff can have more than one schedule on the same day.
3)Only one staff per page.
4) week will start based on date ex: for staff 2 calendar will start based on date.
Wednesday Friday Tuesday Wednesday Thursday
01/01/14 3/01/14 7/01/14 8/01/14 9/01/14
Sample data:
expected format:
Staff1 (page 1)
Monday Wednesday Friday Monday
13/10/14 15/10/14 17/10/14 20/10/14
Staff 2 (page 2)
Wednesday Friday Tuesday Wednesday Thursday
01/01/14 3/01/14 7/01/14 8/01/14 9/01/14
(page 3)
Saturday Wednesday Thursday Friday Wednesday
11/01/14 15/01/14 16/01/14 17/01/14 22/01/14
and so on....
I was trying to have multivalue options in a ssrs report, and I used this query
SELECT {[Measures].[Sales Amount],[Measures].[Tax Amount]} on columns,non empty([Product].[Color].[Color],[Product].[Product Name].[Product Name]) on rows
from
( select
(STRTOSET(@color))
on columns
from [Analysis Services Tutorial])
But the report only showed the default value as an option(in this format [Product].[Color].&[Multi] whic is not presentable),and what I also noticed in the parameter option is that, the available values option is set to none , also when I try to use get from query , it does not give me the vales for the parameters,and when I right click the designer pane it does not have the show hidden dataset option.I have created the parameter with multivalue option. what can I do to get the multivalue option to work.
My system environment: win2008 R2 SP1 64bit + SQL 2005 SP4 32bit
I amended the configuration file of rsreportserver.config with the below:
<Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.CsvRenderer.CsvReport,Microsoft.ReportingServices.CsvRendering" >
<Configuration>
<DeviceInfo>
<Encoding>UTF-8</Encoding>
</DeviceInfo>
</Configuration>
</Extension>
If I run the report and then click export by selecting the csv format, it looks ok with the encoding of UTF-8.
However, the same report , when I created a subscription and saved it in the hard driver. Its encoding became USC-2 Little Endian.
When the SSRS report exported to CSV file, all the column headers are added in the first row. The issue here is, I have hidden( thru Visibility property) some of the columns in the report but those columns are also displayed in the header row(first row)CSV file and the blank values for their corresponding data.for example, I have displayed only below 3 columns out of 6 columns in the report.col1, col2, col3but the CSV generated as below:
format..col1,col2,col3,col4,col5,col6a1,a2,a3,,,b1,b2,b3,,,c1,c2,c3,,,
I don't want the highlighted items.The TableColumn Visibility property has been setup as below..
=IIF(Fields!col4.IsMissing, TRUE, FALSE)
When the report is exported to other formats(like Excel,XML..) this works fine.. i.e., no hidden columns are displayed.
I have 400 records in my report , i want display 20 records per page , how can i do the same in ssrs.
View 18 Replies View RelatedFrom the image above, I am totaling the column HHMMSS is SSRS with the below expression:
=CStr(sum(CInt(split(Fields!HHMMSS.Value,":")(0)))+sum(CInt(split(Fields!HHMMSS.Value,":")(1)))60)
&":"& CStr(sum(CInt(split(Fields!HHMMSS.Value,":")(1))) mod 60+sum(CInt(split(Fields!HHMMSS.Value,":")(2)))60)
&":"& CStr(sum(CInt(split(Fields!HHMMSS.Value,":")(2))) mod 60)
I equally tried:
=iif(Fields!HHMMSS.Value = "", "", CStr(sum(CInt(split(Fields!HHMMSS.Value,":")(0)))
+sum(CInt(split(Fields!HHMMSS.Value,":")(1)))60)
&":"& CStr(sum(CInt(split(Fields!HHMMSS.Value,":")(1)))
mod 60+sum(CInt(split(Fields!HHMMSS.Value,":")(2)))60)
&":"& CStr(sum(CInt(split(Fields!HHMMSS.Value,":")(2))) mod 60))
and nothing works. What could be wrong with my expression?