Reporting Services :: Unable To Generate Report With URL With StartDate And EndDate Parameters?
Aug 14, 2015
i have problem generating the SSRS Reports.
i have Report URL with 2 parameters-- @StartDate and @EndDate
when i hard coded the values and copy the URL in IE, Report gets generated
sample URL's:
[URL]
but when i use Parameters--Report is not getting generated.
[URL]
Below is the error;
Reporting Services Error
The value provided for the report parameter 'StartDate' is not valid for its type. (rsReportParameterTypeMismatch)
SQL Server Reporting Services
View 2 Replies
ADVERTISEMENT
Jan 3, 2008
Hi,
If i pass a date(03/01/2008) i need to get the startdate(31/12/2007) and enddate(05/01/2007) of the week. Is there any functionallity in SSRS 2005 to do this.
Thanks
Dinesh
View 3 Replies
View Related
Aug 1, 2005
Say I have a table which has the validity of an offer as two seperate field, being startDate and endDate:
Code:
ID startDate endDate
1 2005-09-01 2005-10-01
2 2005-06-20 2005-10-20
3 2005-07-18 2005-08-16
Now say I want to filter on this data by startDate and endDate, however I have to return any offer that is valid for a specific period.
E.g. if I filter by startDate = 2005-09-10 and endDate = 2005-10-01 then I want it to return the offers with the ID of 1 and 2 as both of these are valid for the dates I'm filtering on.
I can't for the life of me figure out how to do this at the moment, maybe it's too early in the morning to be thinking about this.
Any help is greatly appreciated.
-D
View 6 Replies
View Related
Jun 27, 2014
I want to know how to make StartDate and EndDate should be greater than current date....
View 4 Replies
View Related
Jul 28, 2014
Here is sample data I am working with:
Create table cattimelines (categoryID int, EffectiveDate datetime, CategoryValue varchar(11))
INSERT INTO cattimelines(categoryID, EffectiveDate, CategoryValue) VALUES(1000, '2014-01-01', 'A')
INSERT INTO cattimelines(categoryID, EffectiveDate, CategoryValue) VALUES(1000, '2014-02-01', 'B')
INSERT INTO cattimelines(categoryID, EffectiveDate, CategoryValue) VALUES(1000, '2014-04-01', 'C')
INSERT INTO cattimelines(categoryID, EffectiveDate, CategoryValue) VALUES(1000, '2014-07-01', 'A')
I need to calculates a term date for each record which will be 1 day before the effective date of any new record, thus:
CATEGORYIDEFFECTIVEDATETERMDATECATEGORYVALUE
10002014-01-012014-01-31A
10002014-02-012014-03-21B
10002014-04-012014-06-30C
10002014-07-01NULLA
View 3 Replies
View Related
Nov 4, 2014
I have one table,
Table1:
EventId EventName EventStartDate EventEndDate RepeatCount StartTimeEndTime
1Event1 2014-11-04 00:00:00.0002014-11-25 00:00:00.000 4 4:30 PM6:30 PM
2Event2 2014-11-05 00:00:00.0002014-11-12 00:00:00.000 2 3.00 AM4.00 AM
3Event3 2014-11-01 00:00:00.0002014-11-15 00:00:00.000 3 1.00 PM 2.00 PM
4Event4 2014-10-30 00:00:00.0002014-11-06 00:00:00.000 2 5.30 PM 6.30 PM
5Event5 2014-10-16 00:00:00.0002014-11-16 00:00:00.000 0 5.30 PM 6.30 PM
I want to display 2 weeks Events from Table 1 depends on repeat count
(if event scheduled on Tuesday(2014-11-04) and repeat count is 4 then it should repeat the 2 row of data)
We have to display only upcomming events, if the repeat count is 0 and the startdate and enddate falls by todays date then it should display as a single row.Data's Should be ordered by recent date
Expected Result
S.NoEventIdEventName EventDateTime
11Event1 2014-11-04 00:00:00.000
22Event2 2014-11-05 00:00:00.000
34Event4 2014-11-06 00:00:00.000
43Event3 2014-11-08 00:00:00.000
51Event1 2014-11-11 00:00:00.000
62Event2 2014-11-12 00:00:00.000
73Event3 2014-11-15 00:00:00.000
85Event5 2014-11-16 00:00:00.000
Assume today's date 2014-11-04 00:00:00.000 and time now 3.40 PM
View 8 Replies
View Related
May 3, 2012
I need query which will check user supplied date range is in between the existing table startdate and enddate.
if any of the date of user supplied date range is in between the tables start date and end date,it should retrun that record from table.
for example user supply date range is from 1 may 2012 to 5 may 2012.
then query must check that
1 may 2005
2 may 2005
3 may 2005
4 may 2005
5 may 2005
(all dates) is in between startdate and enddate of existing table.
View 2 Replies
View Related
Jul 31, 2015
For some of my calculations it is mandatory to get the first and the last date, filtered by the slicer type "timeline".
This works well as long as the date is not used on rows or columns ...
As soon as I'm using theDate within the rows this very simplistic dax measure doesn't work ...
I'm wondering how to determine the StartDate (from the timeline) and the EndDate (from the timeline) when "thedate" is actively contributing to the filtercontext.
In my opinion it is not another example of the "event in progress" situation, due to the fact that start and end dates are actively selected by the user and can not be derived from within the date model.
[URL]
View 2 Replies
View Related
Jan 15, 2007
Hi,
I have created a report in SQL reporting using serveral parameters including a date parameters called
StartDate EndDate
Now my requirement is, in ReportViewer I need to validate in such a way where
"StartDate" should not be greater than "EndDate".
So kindly help me out by giving me possible solution for the above issue.
thanks in advance,
Ramesh KS
View 1 Replies
View Related
Oct 1, 2015
I am creating simple report in ssrs and pass one parameter only. It will work perfectly (here user enter the parameter value). but i need that i should select the value in drop down box. i had tried many time and did different ways but I am unable to do it.
First i gave the parameter in my sql query in Data set (like WHERE COUNTRY = @COUNTRY) and i checked the Parameters tab in the data set. Here by default comes the Parameter Name: COUNTRY and Parameter value: [@COUNTRY].
Next i select COUNTRY Parameter in the Report Data Pane. and go to properties Here in General Tab: Name COUNTRY Prompt: COUNTRY, Select Get values from query in available values Tab (and also i tried with Select Get values from query in Default Value Tab) and Select Data set: Data Set1, Value field: COUNTRY and Label Field COUNTRY. And Click Ok
And tried to preview the report, it throwing below error
"An error Occured during local report processing. The definition of the report is invalid. The Report Parameter 'COUNTRY' has a DefaultValue or a ValidValue that depends on the report parameter "COUNTRY". Forward dependencies are not valid.
How can I achieve dropdown list.What i missed? Even i unable to do it Multi valued parameters and Cascading parameters.
Actually i am working on SQL Express 2012 version.
View 5 Replies
View Related
Oct 9, 2015
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies
View Related
Oct 15, 2015
I was able to log in to SSRS report manager. But i was unable to run a report i designed on report builder.
It prompts for login when i wanted to run the report and i used the same windows authentication to sign in
It will show me the parameters but when i click on view report it gives this error
"Data source 'DataSource1': An error has occurred.
Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'DataSource1'. ---> System.Data.SqlClient.SqlException: Login failed for user 'Acc-11Admin'."
View 4 Replies
View Related
Oct 5, 2015
I have to display three months name as column name in ssrs reports. These month column will be dynamically. So i have to display the column dynamically.
View 3 Replies
View Related
Sep 16, 2015
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level** and **Salesamount**.
Values are like
**[-]category** **100**
**[-]subcat** **50**
**product** **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
View 3 Replies
View Related
Feb 8, 2015
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
View 3 Replies
View Related
Sep 24, 2015
How to achieve by using SSRS. How we can "quick run" report within the subscription menu to ensure report was set up correctly during creation. Is there any way to generate sample subscriped report without waiting for scheduled time.
I mean whether we can verify the report parameters & data in generated the report. I have verified SSRS report manager .i cant see any button or option to test run the report in subscription feature.
View 6 Replies
View Related
Nov 21, 2004
Hi guys & gals
I'm just setting up Reporting Services for our company and it's a great product, no doubt about it. However, I've come across a problem I can't solve and I wonder if any of you can help.
I've produced a sales report and I want my users to be able to enter a list of sales periods to include on the report. For example, the user might want to view the report for periods 10,11,13,14 and 17 and exclude periods 12,15 and 16. Obviously, the underlying query will probably involve an IN() clause but I'm struggling to think of a way that the user might be able to enter these parameters.
The most obvious way might be by typing in a comma separated string, but I don't know how to then put those values into the query.
Anyone got any ideas?
View 1 Replies
View Related
Jan 5, 2007
i am trying to generate a report based on 3 parameters
age, location, ethnciity
every thing works fine in data and layout tab,
when i run the preview tab, it give me the option to input paramaters and then when i hit veiw report, it shows processing report.... (indefinite) time.
i tried executing the query in data tab, it takes less than a sec.
any ideas??
am i doing somethign wrong in parameters??
View 7 Replies
View Related
Sep 8, 2015
1 report but different departments run this report with different parameters. Atm I have copied this report for the 4 departments and adjusted the default parameters accordingly (highly inefficient). Isn't there a way to just have one report and that I can adjust the default parameters in code based on user or group ?
View 6 Replies
View Related
Jul 7, 2015
I have a report I'm working on that provides a census of members. These members have certain properties;
Load date,Report Type,Clinic,Care Manager,PCP Name.
The census is from an outside group and what I do is massage it for our internal databases and reports to our care managers.
The report starts out by returning only those entries that were received in the last report from the outside vendor and I filter each of the parameters by using a WITH statement and an INNER JOIN, as follows;
WITH Date_of_Most_Recent_Census AS
(
SELECT
MAX(Load_Date) AS [CurDate]
FROM
Census_Rpt_Final
)
[Code] ...
The default is for all parameters to start out with all possible values for the current load date. But, I need to be able to filter the available - and default - values for each parameter based upon the selection of the other parameters.
So, the Load Date is built in by use of the CTE that is a part of all the parameters. But, I need the report to allow the end user to select from each of the others, but limiting what is avaliable for selection based upon the settings of the other parameters.
For example, the second parameter is the Report Type. It can be either "Hospital," or "SNF." But, not all Clinics, Care Managers or PCPs may have an entry in both types. So, if the user selects, say, "Hospital," all the parameters would alter their available and default values such that they only include options where the census shows they are a "Hospital" entry.But, not all Clinics in the most recent census may have both report types. So, if the end user selects a particular clinic, it would also recalculate the available and default values for Report Type, as well as those beneath it on the list. And, likewise for the remainder of the parameters.
My initial thought was to add WHERE statements to the datasets controlling each parameter, but SSRS keeps asking me to define the parameters when I click out of the dataset's properties. Now, I know that SSRS is a single pass process - and, I'll cross the bridge on adjusting parameters defined earlier in the list when I come to it - but I thought that parameters lower in the list would update, since they'd have their values defined.For instance, the Clinic parameter is after Report Type, so the code I used to set up Clinic was;
WITH Date_of_Most_Recent_Census AS
(
SELECT
MAX(Load_Date) AS [CurDate]
FROM
Census_Rpt_Final
)
SELECT DISTINCT
[code]....
But, this asks me to define @ReportType, even though it precedes Clinic on the parameter list.
View 2 Replies
View Related
Jun 2, 2015
I need to schedule a report with date ranges which change from month to month. Is there a scheduler date function I can place in the parameter field(s) for that report?
View 4 Replies
View Related
Jul 20, 2015
On my report, I have two parameters that are used to filter my report. I would like for the report to initially run without filters and without having the user required to input parameters. I know that this can be accomplished by using the multi value parameter and having it "Select All" by default, but for my parameters, I would like for each parameter to only allow the user to select one value. Is it possible to have this requirement without having to enable select multi values?
View 2 Replies
View Related
Jul 2, 2015
I've got a feeling that the answer is, "can't be done," but I'll go ahead and ask the august members of this forum, anyway. Is it possible to alter the placement of the Parameter fields when previewing a report?
At the moment, it seems that they form in a column of twos, reading from left to right. I see how the ORDER is affected, by changing the order of the parameters in the Report Data window, but can I change the number of columns?
View 2 Replies
View Related
Oct 4, 2000
Please i need an exmple of ur solution, thanks :)
I'm using some files to show certain pages on certain date for an example
File name : aa.doc
start date: 10/02/00
end date : 10/03/00
But it expires on 10/02/00, here is the strored procedure:
Before the date comes, it expires the page
Here is my stored procedure:
"
SELECT startdate, enddate,archivedate
and (startdate is null or (getdate() >= startdate and getdate() <= enddate))
and (archivedate is null or (getdate() <= archivedate))
group by startdate, enddate order by startdate desc "
Thankx a lot
View 1 Replies
View Related
Sep 2, 2015
After adding cascading parameters my report which was running earlier is failing. I'm using Report builder 3.0, windows 2008r2, am running the report from the server
Error message "An error has occurred during report processing.(rsProcessingAborted)
Query execution failed for dataset 'LastName' (rsErrorExecutinGcOMMAND)
Incorrect Syntax near ','."
Is there a way where i can look up the code in xml using report builder or some other way so that i can delete the extra '','.
View 6 Replies
View Related
Aug 6, 2015
I'm using Server 2012 R 2 with SQL Server 2012 Reporting Configuration Manager 11.0.5343.0 . The default time values (pTimeframe) for generating the report of my DPM Summary are the default values Day - Week - Month.
How can I define the value "Last 24 hours" for example?! Because the DPM Server does it backups the whole night starting at 08:00pm the day before and the result of the finished Backups of yesterday won't be shown when I use the defaut value "Day".
I want to send a subscription every morning for the backups only of the night before (not the whole week).
View 2 Replies
View Related
Jul 24, 2007
I have created a custom data extension.
I am using this custom data extension from BI Studio.
Que1: I want to create report parameters from BI studio and capture them in my Data Extension.
Que2: Every report parameter has so many properties, like hidden, internal, default value etc, how do capture that information in my data extension, the parameters only give me name and value.
Que3: I know I can capture command Text. So My command can be Select * From tablename where fieldname= @myFieldname. Once I get this commandText in my data extension, How do extract parameters of the command?
Que4: If I have any custom attributes in my RDL file, Can I capture them in my Data Extension ?
Any help is appreciated...
View 1 Replies
View Related
Aug 31, 2015
I created a re port using the Report builder. The report runs fine. I want to create a parameter on the report. I created a new dataset with the query "select distinct dept from table" . Then i created a new parameter to get the values from the second dataset. After running the reports when i selected 2 departemnts, its still showing all the records.
View 3 Replies
View Related
Jun 9, 2015
I need to send a report to various email id based on parameters.
I have a report which has a dropdown which shows the list of parameters. I need to send report to 3 different email ids with different parameters. How to do that?
View 6 Replies
View Related
May 5, 2015
In VS2008 SSRS, when creating a dataset, only the name of the stored procedure was required. When populating the dataset, VS prompted for the parameters, whether or not there were any. In VS2010, the name of the stored procedure is not enough if there are parameters.When creating a dataset in Visual Studio 2010 for databases and stored procedures in SQL 2012, I must provide (what should be) run-time parameters to obtain a field list and then to preview the report.
So the embedded dataset looks like this (wherein the only parameter is a password): exec dbo.spu_procedure1 @PW='999'.This works well and as expected during report design and development. But 999 must be provided at run-time by the requester, and not in the dataset definition. If I remove the parameter in the dataset's exec string before deploying the report, the field list is cleared and the report is unusable. So I cannot overcome what seems a contradiction: necessary to obtain a field list, but "yet-to-be-provided" when the user selects the report.
By keeping @PW='999' in the dataset specification, the user cannot override the parameter and automatically has a password to view the report.
View 3 Replies
View Related
Sep 16, 2011
I am a beginner with Report Designer (and with Reporting Services). Following the tutorials 'Adding parameters to filter Reports ...' I tried using the @symbol to add a parameter to my query: where code = @code_value...I get the error: ORA -000936 missing expression (msorlib) Is there another syntax that I should use to define a parameter/variable in query for my oracle dataset?
View 4 Replies
View Related
Dec 18, 2007
Hi
This is the code which I have written in code window.
Public Shared Function CalcLocalFactor(ByVal CalcLifeCode As Integer, ByVal CalcFiscalAge As Integer, ByVal CalcLifeYearsUsed As Double, ByVal CalcLocConvention As String, ByVal CalcSRate As Integer) As Double
Dim locCalcFiscalAge As Integer = 0
Dim locFactor As Double= 1.0
Dim locFactor1 As Double = 1.0
Dim REM1 As Integer = 1
Dim DEP As Double = 0
Dim YR As Integer
Dim HALF_YEAR As Double
Dim LINEAR As Double
Dim MACR As Double
If CalcFiscalAge > CalcLifeCode + 1 Then
locCalcFiscalAge = 0
locFactor = 1.0
End If
If (CalcLocConvention <> "HALF-YEAR" And CalcLifeYearsUsed < CalcLifeCode) Then
locFactor = Math.Round((CalcLifeYearsUsed / CalcLifeCode), 4)
End If
If (CalcLocConvention = "HALF-YEAR") Then
for YR = 1 to CalcFiscalAge step 1
If YR = CalcLifeCode + 1 Then
locFactor1 = 1
Exit For
End If
If (YR = 1 Or YR = CalcFiscalAge) Then
HALF_YEAR = 2
Else
HALF_YEAR = 1
End If
LINEAR = Math.Round(REM1 / (CalcLifeCode - YR + 1.5) / HALF_YEAR, 4)
MACR = Math.Round(REM1 / CalcLifeCode * CalcSRate / HALF_YEAR, 4)
If MACR >= LINEAR Then
DEP = MACR
Else
DEP = LINEAR
End If
locFactor1 = locFactor1 + DEP
REM1 = 1 - locFactor1
locFactor = locFactor1
Next
End If
Return locFactor
End Function
I'm calling this code in a Report Parameter like below:
=Code.CalcLocalFactor(Parameters!CalcLifeCode.Value,Parameters!CalcFiscalAge.Value,Parameters!CalcLifeYearsUsed.Value,Parameters!CalcLifeYearsUsed.Value, Parameters!CalcSRate.Value )
It is working fine for the first record where as for other records, the value is not getting changed. i.e. the first records value is coming repeatedly for all other records also.
How can I dynamically change the parameter values of the function?
Parameter is not accepting directly the field names, hence I used other parameter to initialize the field and used that parameter for this.
Ex. Parameter Name ; FieldPurchDate (internal) FieldName : PURCHDATE
Other parameter: FieldInDate (internal) FieldName : InDate
While initializing the new parameter CalcPurchDate,, I used an expression for this: Parameters!CalcFiscalAge.Value
=iif(Parameters!FieldPurchDate.Value is nothing, Parameters!FieldInDate.Value,Parameters!FieldPurchDate.Value)
and using this CalcPurchDate for processing of the parameter:
These are some of the things , I am doing ....
Please let me know how to fix this issue...
Thanks in advance
Regards,
Radhika
View 3 Replies
View Related
May 22, 2015
I have a third party app that passes parameters (main dataset query) from the app to SSRS. Unfortunately, when the parameters are passed from the app they will contain equal signs ("=") in front of each parameter. For example, the parameters that may be passed to the main dataset query should be:
"HYDRO, OKO, ONEPL, TECHNI"
However, the parameters that are passed from the app, get to SSRS as:
"=HYDRO, =OKO, =ONEPL, =TECHNI"
Again, this is for the main dataset query and there may be one parameter or there may be any number of them.
Basically, I need to strip the "=" signs from the parameters. whether there is one parameter or ten.
I believe that I will need a custom function to strip the equal signs?
View 5 Replies
View Related
