Has anyone had success using it yet? We've been playing around with it and maybe we're doing it wrong, but so far we can't get it to produce anything useful. I mean, it pivots but we can't get it to do anything useful, like group an aggregate or anything.
View 2 RepliesHi all,
In MyDatabase, I have a TABLE dbo.LabData created by the following SQLQuery.sql:
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
INSERT €¦ ) VALUES (2, 'MW2', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (3, 'MW2', 'Trichloroethene', 20.00)
INSERT €¦ ) VALUES (4, 'MW2', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (6, 'MW6S', 'Acetone', 1.00)
INSERT €¦ ) VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (9, 'MW6S', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (10, 'MW6S', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (11, 'MW7', 'Acetone', 1.00)
INSERT €¦ ) VALUES (12, 'MW7', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (13, 'MW7', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (14, 'MW7', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (15, 'MW7', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (16, 'TripBlank', 'Acetone', 1.00)
INSERT €¦ ) VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (19, 'TripBlank', 'Chloroform', 0.76)
INSERT €¦ ) VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
A desired Pivot Table is like:
MW2 MW6S MW7 TripBlank
Acetone 1.00 1.00 1.00 1.00
Dichloroethene 1.00 1.00 1.00 1.00
Trichloroethene 20.00 1.00 1.00 1.00
Chloroform 1.00 1.00 1.00 0.76
Methylene Chloride 1.00 1.00 1.00 0.51
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I write the following SQLQuery.sql code for creating a Pivot Table from the Table dbo.LabData by using the PIVOT operator:
USE MyDatabase
GO
USE TABLE dbo.LabData
GO
SELECT AnalyteName, [1] AS MW2, AS MW6S, [11] AS MW7, [16] AS TripBlank
FROM
(SELECT SampleName, AnalyteName, Concentration
FROM dbo.LabData) p
PIVOT
(
SUM (Concentration)
FOR AnalyteName IN ([1], , [11], [16])
) AS pvt
ORDER BY SampleName
GO
////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the above-mentioned code and I got the following error messages:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'TABLE'.
Msg 207, Level 16, State 1, Line 1
Invalid column name 'AnalyteName'.
I do not know what is wrong in the code statements of my SQLQuery.sql. Please help and advise me how to make it right and work for me.
Thanks in advance,
Scott Chang
Running this on a database gives me something like below
select area, status, count(*) from bugs where bugcategory='performance' group by area, status order by area
Access
Active
37
Access
Closed
12
Access
Resolved
15
AWS
Active
5
AWS
Resolved
2
ECM
Active
16
ECM
Closed
4
ECM
Resolved
16
Excel
Active
158
Excel
Closed
52
Excel
Resolved
15
Excel and Access Services
Active
50
Excel and Access Services
Closed
98
Excel and Access Services
Resolved
4
Groove
Active
8
Groove
Closed
1
Groove
Resolved
1
I want the report to pivot and look something like this
Team
Active
Resolved
Closed
Access
37
12
15
AWS
5
2
0
ECM
16
6
16
€¦.
I tried something like this
SELECT area, [Active], [Resolved], [Closed]FROM (select area, status, count(*) as bugcount from bugs where bugcategory='performance' group by area, status) AS SOURCEPIVOT ( bugcount FOR status in [Active], [Resolved], [Closed]) as PivotTableorder by area
I get an error
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'FOR'.
Any ideas? Can I get some help?
Hi, i'm trying to port a pivot query from access to sqlserver.
I'm trying this query:
SELECT IDMerce, [1] AS [Department-1], [2] AS [Department-2], [3] AS
[Department-3], [4] AS [Department-4]
FROM (SELECT IDMerce, Pezzi, IDMagazzino
FROM Disponibilita) p PIVOT (sum(Pezzi) FOR
IDMagazzino IN ([1], [2], [3], [4])) AS pvt
this works, but in my case i don't know in advance how many transformations
i need, so there is a solution?
Thanks
Greetings,
I have a problem, i am upgrading a system that uses Oracle databases for using SQL Server 2005 databases. The thing is that the operator (+) (involved in many queries) is from Oracle and operators(*= and =*) are not supported in SQL Server 2005 (and not comply with the Ansi standard) i need help translating these queries. An example would be like this:
SELECT ...
FROM IBA_MPACCIONESXREQ, IBA_MPPERMISOS, IBA_MPENTIDADES, IBA_MPREQUERIMIENTOS, IBA_MPPROCEDENCIAS, IBA_LOCALIZACIONES, IBA_MPPROCEDXLOC, IBA_USUARIOS
WHERE IBA_LOCALIZACIONES.ID_LOCACLIZACION = IBA_MPPROCEDXLOC.ID_LOCACLIZACION
AND IBA_MPPROCEDENCIAS.IDPROCEDENCIA = IBA_MPPROCEDXLOC.IDPROCEDENCIA
AND IBA_MPREQUERIMIENTOS.IDPROCEDENCIALOCALIZACION = IBA_MPPROCEDXLOC.IDPROCEDENCIALOCALIZACION
AND IBA_MPENTIDADES.IDENTIDAD (+) = IBA_MPPROCEDXLOC.IDENTIDAD
AND IBA_MPPERMISOS.IDPERMISO (+) = IBA_MPPROCEDXLOC.IDPERMISO
AND IBA_MPACCIONESXREQ.IDREQUERIMIENTO = IBA_MPREQUERIMIENTOS.IDREQUERIMIENTO
AND IBA_MPACCIONESXREQ.USERNAME = IBA_USUARIOS.USERNAME
ORDER BY ...
I didnt include the SELECT and ORDER BY text because i dont think its important. Also i know that you have to move the outer joins to the FROM clause but i didnt manag to get it. Could you help me? thank you in advance.
Sincerely,
Fernando Martinez
Hi!
I have a table Items(id, name, section, id_format, price) and a table Format(id, format,order)
What I want to do is display: Name, Format1, Format2, Format3.
How can I acheive that result??
THanks!!
-JTM
I get this error when I attempt to read from a datareader using the following sql statement:
Dim mysql As String = "SELECT PayrollTrans.PayrollID, Employees.[EmpFirstName] & ' ' & " _
& " Employees.[emplastname] AS FullName, Employees.[City] & ', ' & Employees.[State] & ' ' & Employees.[zip] AS CityState " _
& " , PayrollTrans.Date, PayrollTrans.EmployeeID, PayrollTrans.RegHours, " _
& " PayrollTrans.OTHours , PayrollTrans.RegPay, PayrollTrans.OTPay, " _
& " PayrollTrans.FedTax, PayrollTrans.FICATax, PayrollTrans.MedicareTax, " _
& " PayrollTrans.ESCTax, PayrollTrans.StateTax, PayrollTrans.ESCEMPTax, " _
& " PayrollTrans.FUTATax, PayrollTrans.NetPay, Employees.EmployeeID, " _
& " Employees.Address1, Employees.Address2, Employees.SSAN, " _
& " Employees.PayType, Employees.RegPayRate, Employees.OTPayRate, " _
& " Employees.MaritalStatus, Employees.FedExemption, Employees.StateExemption, " _
& " Employees.Active, Employees.SelectforPay, Employees.PayDate " _
& " FROM PayrollTrans, Employees where PayrollTrans.EmployeeID = Employees.EmployeeID;"
my reader command list as follows:
Dim objCM As New SqlClient.SqlCommand(mysql, SqlConnection1)
Dim objDR As SqlClient.SqlDataReader
objDR = objCM.ExecuteReader
Any ideas on where I am going wrong?
Thanks in advance
I am getting a error message saying: Invalid operator for data type. Operator equals boolean AND, type equals datetime.
I traced the pointer to @gdo and @gd, they are both dates!
INSERT INTO AdminAlerts values (CURRENT_USER, 'UPDATE', getDate(), @biui, 'Updated booking, ID of booking updated: ' & @biui & ', Booking date and time before/after update: ' & @gdo & '/' & @gd & ', Room number before/after update: ' & @rno & '/' & @rn & ' and Customer ID before/after update: ' & @cio & '/' & @ci)
If I cut that two dates out it works fine.
Could someone tell me the syntax to include a date in a string :confused:
Is there a way to include multiple aggregations in one pivot statement?
For example:
select
category_cd,
[a]
from
(
select
category_cd,
status_cd,
balance
from
table
) as t
pivot
(
sum(balance) for status_cd in
(
[a]
)
) as p
will return:
category_cda
1 2399059.92
2 174310512.4
3 2211823370
4 1564431422
But I'd also like to get a count for the pivot column. Can anyone point me in the right direction. Thank you.
I have SQL 2005 and am trying to do a pivot table. I am running into a lot of challenges. The first thing I am running into is it giving me the following error:
The following errors were encountered while parsing the contents of the SQL Pane: The PIVOT SQL construct or statement is not supported.
My table has the following columns:
Client
Dollars Billed
SlipDates
The there is a slip date for each client for for april 1, then may 1, etc.
I am trying to get it to list out like this
____________April2007_________May2007
Client1_____DollarsBilled_____DollarsBilled
Client2_____DollarsBilled_____DollarsBilled
Client3_____DollarsBilled_____DollarsBilled
Here is my current attempt.
SELECT Client, [4/1/2007 12:00:00 AM] AS April2007, [5/1/2007 12:00:00 AM] AS May2007
FROM (SELECT Client, DollarsBilled, SlipDates
FROM dbo.MonthlyClientBillables) p PIVOT (SUM(DollarsBilled) FOR Client IN ([4/1/2007 12:00:00 AM], [5/1/2007 12:00:00 AM])) AS pvt
ORDER BY Client
Any help would be greatly appreciated.
Can we PIVOT on more than 1 column in SQL SERVER 2005? For eg,
I have this select using Pivot, but I need to pivot on a second column too. I need to see a fourth column, in the output, that will be the TOTAL across for each requesters.
How can I do that.
select case when requester is not null then requester else 'Unknown' end as Requester,
[Pending],[PENDING - RECORDING INFORMATION] from
(select case when requester is not null then requester else 'Unknown' end as Requester,
case when AMPSSTATUS is not null then ampsstatus else 'Null'end as Ampsstatus,loannum
from TABLEA
)p pivot (count(loannum)
for AMPSSTATUS in
([Pending],[PENDING - RECORDING INFORMATION])) as pvt
Is there any equivalent for Transform-pivot of MS Access in SQL Server 2005?
I have this query in MS Access that I need to migrate to SQL Server 2005
TRANSFORM Sum(CD1([CheckAmount]))
AS [The Value]
SELECT "Total
Amount of Checks" AS Type, tblResult.AccountNumber,
tblResult.CheckDate, tblResult.Status, Sum(CD1([CheckAmount]))
AS Total
FROM tblResult
GROUP BY "Total Amount
of Checks ", tblResult.AccountNumber, tblResult.CheckDate,
tblResult.Status
PIVOT IIf(IsNull([statusdate]),"Outstanding",Format([StatusDate],"Short
Date"));
I have two data tables:
1) Production data with column headers: Key, Facility, Line, Time, Output
2) Costs data with column headers: Key, Site, Cost Center, Time, Cost
The tables have a common key named obviously as Key. The data looks like this:
Key
Facility
Line
Time
Output
Alpha
I would like to have two pivot tables which I can filter with ONE slicer based on the column Key. The first pivot table shows row labels Facility, Line and column labels Time. Value field is Output. The second pivot table shows row labels Site, Cost Center, and column lables Time. Value field is Cost.How can I do this with Power Pivot? I tried by linking both tables above to a table with unique Keys in PowerPivot and then creating a PivotTable where I would have used the Key from the Keys table.
Can I force the following measure to be visible for all rows in a pivot table?
Sales Special Visibility:=IF(
  HASONEVALUE(dimSalesCompanies[SalesCompany])
  ;IF(
    VALUES(dimSalesCompanies[SalesCompany]) = "Sales"
    ;CALCULATE([Sales];ALL(dimSalesCompanies[SalesCompany]))
    ;[Sales]
  )
  ;BLANK()
)
FYI, I also have other measures as well in the pivot table that I don't want to affect.
I have a simple pivot table (screenshot below) that has two variables on it: one for entry year and another for 6 month time intervals. I have very simple DAX functions that count rows to determine the population N (denominator), the number of records in the time intervals (numerator) and the simple percent of those two numbers.
The problem that I am having is that the function for the population N is not overriding the time interval on the pivot table when I use an ALL function to do so. I use ALL in other very simple pivot tables to do the same thing and it works fine.
The formula for all three are below, but the one that is the issue is the population N formula. Why ALL would not work, any other way to override the time period variable on the pivot table.
Population N (denominator):
=CALCULATE(COUNTROWS(analyticJudConsist),ALL(analyticJudConsist[CurrentTimeInCare1]))
Records in time interval (numerator):
=COUNTROWS(analyticJudConsist)
Percent:
=[countrows]/[denominatorCare]
How can I apply "Min" formula under a "new measure" (calculated field) within a pivot table under Power pivot 2010?Can see that neither does it allow me to apply "min" formula directly "formula box" nor could find any other option.Intent formula: "=Min(1,sum(a:b))" this isn't allowed so all I can do is "=sum(a:b)".
View 3 Replies View RelatedI have simple pivot table (below screenshot with info redacted) that displays a population number ("N" below), this is the denominator, a cumulative numerator number (below "#") and a simple cumulative percent that just divides the numerator by the denominator. It cumulates from top to bottom. The numerator and percent are cumulative using the below functions. There are two problems with the numerator and percent:
1. When there is not a number for the numerator, there is no value displayed for both the numerator and the percent..There should be a zero displayed for both values.
2. When there has been a prior number for the numerator and percent (for a prior month interval) but there is no number for the numerator in the current month interval, the prior month number and percent are not displayed in the current month interval--see the 3rd yellow line, this should display "3" and "16.7%" from the second yellow line.Here is the formula for the numerator:
=CALCULATE(count(s1Perm1[entity_id]),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory])))
Here is the formula for the percent:
=(CALCULATE(countrows(s1Perm1),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))))/(CALCULATE(COUNTROWS(s1Perm1),ALL(s1Perm1[Exit],s1Perm1[ExitMonthCategory])))
I have a query which I want to convert It PIVOT query
SELECTÂ Â Â Â Parties.AreaID, Parties.Area, CashSalesDetail.ProductID, CashSalesDetail.ProductName, SUM(CashSalesDetail.Qty) AS QtyFROMÂ Â Â Â Â Â Â Â CashSalesDetail INNER JOINÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â CashSales ON CashSalesDetail.CSNo = CashSales.CSNo INNER JOINÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Parties ON CashSales.PartyID = Parties.PartyIDWHEREÂ Â Â Â (CashSales.TransDate >= CONVERT(DATETIME, '2014-07-01 00:00:00', 102)) AND (CashSales.TransDate <= CONVERT(DATETIME, '2015-06-30 00:00:00', 102))GROUP BY Parties.AreaID, Parties.Area, CashSalesDetail.ProductID, CashSalesDetail.ProductName
following is my requirement after summing up qty of each area
ProductName     area a        area b      area c
abc                         10               0              Â
20
def                          1                Â
4Â Â Â Â Â Â Â Â Â Â Â Â Â Â 2
ghi                          5                Â
3Â Â Â Â Â Â Â Â Â Â Â Â Â Â 10
jkl                            7               Â
15Â Â Â Â Â Â Â Â Â Â Â Â Â 3
Note: numeric values are Quantity of each product in each area
I have data in my Powerpivot window which was generated by a sql query. This data includes a field named 'Cost' and every row shows a value for 'Cost' greater than zero. The problem is that when I display this data in the pivot table all entries for Cost display as $0. At first I thought that maybe Cost was set to a bogus data type (such as 'text) but it is set to ''Decimal Number' so that's not the problem.Â
What is happening and how do I fix it so that my pivot table reflects the values for 'Cost'?
I have a data table that contains budget and actual data by month. Â I use the data to create a pivot that shows actual results next to budgeted results. Â I need a column that shows that variance between those columns. Â I think my issue is that the "Type" field contains actual and Budget. Â I sum on "Type". Â I can't seem to create a sum since those items are in the same field or am I missing something?
Table design
Month|Division|Subdivision|Type|Dept|Rate|Units|Amount
October|DC|Day|Budget|125|10.00|100|1000
October|DC|Day|Actual|125|10.00|110|1100
Output Design
DC
DAY
Actual
Budget
125 AvgOfRate
AvgOfRate
SumOfUnits
SumOfUnits
SumOfAmt
SumOfAmt
How to get a list of values to actually display in correct order in either a slicer or when on an axis on a pivot table?
I currently have the below list and have tried to add a preceding numeric (ex. "1. <=0") or preceding blank space, neither of which is visually great. Is there another way?
<= 0
1 - 6
7 - 12
13 - 18
19 - 24
25 - 30
31 - 36
37 - 42
43 - 48
49 - 54
55 - 60
61 - 66
67 - 72
73 - 78
79 - 84
85 - 90
91 - 96
97 - 102
> 102
I am using excel 2010 and creating pivot table from Power Pivot. I created a pivot table with department slicers. All is good, the problem I am having is whilst in an unfiltered position (ALL) of the slicers (departments) I get 200 pages, now when I click on a given department with say 10 pages, I still get the same 200 pages with the first 10 pages showing the data from the clicked department and 190 blank pages.
All I want is to get a WYSIWYG (What you see is what you get) of what is on the screen as my print, but I am getting extra blank pages right after the data. Â How do I resolve this.
Below are the steps I go thru to printÂ
1. Select slicers in unfiltered position (ALL)
2. Select entire pivot table
3. Select Page layout and select print area.
4. Save
5. Click on Print Preview to preview the print
6. Click on a given department in the slicer and repeat item 5, but this gives me blank pages after the data.
Do I need any other step?Â
I have a Pivot Transform in SSIS (2005) working perfectly, EXCEPT for that the first column of the output (the date) repeats for each of the following columns, which are themselves falling into the correct column, but not on the same line for a particular date as the others. Snipet of result from Data Viewer is:
dbDate site1 site2
1/1/2015 0:00 0.03 NULL
1/2/2015 0:00 0.04 NULL
[code]....
The following is a SAMPLE data from an excel spreadsheet. This SAMPLE data has many other fields as date. Here I have only used two date columns i.e. 28 Dec 2006 and 29 Dec 2006
This data needs to be exported into sql server 2005 table which has the fields below where I have placed the data into a table.
How can this be done please?
data:
Ref Sector Name 28 Dec 2006 29 Dec 2006
1 Sovereign RUSSIA 05 null 173.21
2 Sovereign RUSSIA 07 102.99 102.22
3 Sovereign RUSSIA 10 114.33 104.63
4 Sovereign RUSSIA 18 115.50 145.50
...
sql server table
create table tblData
(
DataID int,
Ref int,
Sector varchar(20),
Name varchar(20),
Date datetime,
value decimal(6,2)
)
DataID Ref Sector Name Date value
1 1 Sovereign RUSSIA 05 28 Dec 2006 null
2 1 Sovereign RUSSIA 05 29 Dec 2006 173.21
3 2 Sovereign RUSSIA 07 28 Dec 2006 102.99
4 2 Sovereign RUSSIA 07 29 Dec 2006 102.22
5 3 Sovereign RUSSIA 10 28 Dec 2006 114.33
6 3 Sovereign RUSSIA 10 29 Dec 2006 104.63
7 4 Sovereign RUSSIA 18 28 Dec 2006 115.50
8 4 Sovereign RUSSIA 18 29 Dec 2006 145.50
...
I am using the pivot task to to a pivot of YTD-Values and after that I use derived columns to calculate month values and do a unpivot then.
All worked fine, but now I get this error message:
[ytd_pivot [123]] Error: Duplicate pivot key value "6".
The settings in the advanced editor seem to be correct (no duplicate pivot key value) and I am extracting the data from the source sorted by month.
Could it be a problem that I use all pivot columns (month 1 to 12) in the derived colum transformation and they aren´t available at this moment while data extracting is still going on?
any hints?
Cheers
Markus
Say, I have the following temporary table (@tbl) where the QuestionID field will change values over time
Survey QuestionID Answer
1 1 1
1 2 0
2 1 1
2 2 2
I'd like to perform a pivot on it like this: select * from @tbl Pivot (min(Answer) for QuestionID in ([1], [2])) as PivotTable
...however, I can't just name the [1], [2] values because they're going to change.
Instead of naming the values like this:
for QuestionID in ([1], [2], [3], [4])
I tried something like this:
for QuestionID in (select distinct QuestionID from @tbl)
but am getting a syntax error. Is it possible to set up a pivot like this:
select * from @tbl Pivot (min(Answer) for Question_CID in (select distinct @QuestionID from @tbl)) as PivotTable
or does anyone know another way to do it?
Is it possible to generate automatic refresh of excel 2013 table which displays some table of a power pivot model on file open?? I dont want to use pivottable (which supports this ...)
View 2 Replies View RelatedI have a pivot table that connects to our data warehouse via a PowerPivot connection. Â The data contains a bunch of comment fields that are each between 250 and 500 characters. Â I've set the columns in this pivot table to have the 'Wrap Text' set to true so that the user experience is better, and they can view these comment fields more clearly.
However, whenever I refresh the data, the text wrapping un-sets itself. Â Interestingly, the 'Wrap Text' setting is still enabled, but I have to go and click it, then click it again to actually wrap the text. Â This is very burdensome on the user, and degrading the experience.
Any way to make this text wrapping stick so that I don't have to re-set it every time I refresh the data?
Just a quick question that I really couldn't find using google or anything because it was too bland.
How do you return the whole database while still using the LIKE operator.
I have a textbox that you can use to search the database but I want all the data to be displayed underneath the box so you can "browse" the data if you don't know the name of what you are looking for.
What would I put as the default value? I used just defaultvalue="%" and that worked in 1 area, but not another. Is this the right way?
Thanks,
Chris
I have a query and for the life of me I cant figure it out.
I have a web form with a number of textboxes on it e.g. Title, subtitle, isbn. I also have a search button. This search page allows a user to enter any combination of fields in the form and then when they click the search button, a datagrid is diaplyed showing the results (gets the results from a SQL DB).
I have got the code working if the user selects say one item, but I dont know how to allow it so that the user can enter any combination of items in the form and the search button will search for it based on what the user says. I think im gettng confused with my logical operators in the sql statement.
If any one can take a look I would be greatful.public void BindData(){String @BookID = TxtBookID.Text;String @Title = TxtTitle.Text;String @Subtitle = TxtSubtitle.Text;String @ISBN = TxtISBN.Text;String @AuthorFName = TxtForename.Text;String @AuthorLName = TxtSurname.Text;
SqlDataAdapter ad = new SqlDataAdapter("SELECT Book_ID_Internal, Title, Subtitle, ISBN, Edition, Publication_Date, Author.First_Name, Author.Last_Name FROM Book, Author WHERE Book.Author_ID = Author.Author_ID AND Book.Book_ID_Internal = '" + @BookID + "' AND Book.Title = '" + @Title + "' AND Book.Subtitle = '" + @Subtitle + "' AND Book.ISBN = '" + @ISBN + "' AND Author.First_Name = '" + @AuthorFName + "' AND Author.Last_Name = '" + @AuthorLName + "'", conn);DataSet ds = new DataSet();ad.Fill(ds, "Book");GridView1.DataSource = ds;GridView1.DataBind();}
protected void BtnSearch_Click(object sender, ImageClickEventArgs e){BindData();}
Hi :)
I have a select statement that consists on something like this :
SELECT * FROM Products WHERE Ref LIKE '%" & Search & "%'
well this works ....but the problem is that i have some Ref in this format "MC-909" and if the user makes a search with the word "MC909" ...it dosent return any value ...
How can i solve this ??
Thanks in advance
Anyone know why this simple query won't work??
this does work:
declare @stat char(10)
set @stat = 'A'
select * from table where status in (@stat)
this does not work:
declare @stat char(10)
set @stat = "'A','B'"
select * from table where status in (@stat)
i've tried 'A,B'
hello,
I got a condition in the query , as shown below:
where nt.Project_type='A' and nt.status='Done' and nt.project_id like '06%'
I also need to add an additional condition : like '07%'. How can I do this, i. e I need the projects where the type = A , status = Done and project_id starting with 06 and 07.
Thanks for any help