I need a new field added 'Field1' which will add SEQUENCE number 1,2,.. based ON GROUP BY MasterID..AND another field TotalCount which will COUNT total masterID (here it will be 2)
CREATE TABLE #Temp1
( MasterID INT,
ClientName VARCHAR(10),
ProductName VARCHAR(50)
[code]...
Add sno 1 to end of the coloum
I have table like ...
400000 laks rows in my table
name address id location
raju hyd 6789 hyd
vamshi vizag 9876 hashinapur
o/p like
I want insert sno coloum and sno 1 to 400000
sno name address id location
1 raju hyd 6789 hyd
2 vamshi vizag 9876 hasthinapur
3
4
5
6
..
.
.
.
.
40000
Hey folks,
Please give me the correct function name, otherwise please ignore in sending reply. I had used all the functions like identity, ident and so on. I need while selecting a querry, i need to generate serial numbers. I dont have identity column in my table. But, i need to generate serial numbers..
In Sybase SQL Any where, we have a function called Number (*) which will in turn generate serial numbers like ex..
Select Number (*) from x
The output will be
Number(*)
1
2
3
4
5
6
and so on..
I need a equivalent function in SQL Server 7.0 in which if i do select on that particular function with a table i should return above values..
Can any one solve this issue...
Please help me in this....
Urs
VJ
I need to put the serial numbers for results in group in SQL Server 2000. Please see below:
My input:
procedureid procname
1 A
1 B
2 A
2 B
2 C
2 D
3 A
3 B
3 C
Output I need:
procedureid procname serial_num
1 A 1
1 B 2
2 A 1
2 B 2
2 C 3
2 D 4
3 A 1
3 B 2
3 C 3
Here is my table:
create table po(
procedureid int,
procname varchar(10),
)
insert into po values (1,'A')
insert into po values (1,'B')
[Code] ....
What I need to do it select the top 80 percent of records per group based on the group total. To be clear I am not trying to just grab the top x percent of rows.
Table 1:
DealerID RepairID
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
1 10
2 11
2 12
2 13
Table 2:
RepairID Tire
1 225/65R17 102T
2 225/65R17 102T
3 225/65R17 102T
4 235/60R18 102V
5 235/60R18 102V
6 235/60R18 102V
7 235/60R18 102V
8 205/55R16 89H
9 205/70R15 89H
13 225/65R17 102T
Table 1 has the total number of repair orders per dealer. This can be obtained by simply grouping on DealerID and counting the number of RepairIDs.
Table 2 has information on some of the repair orders and it is needed to select the top 80% of tire sizes. This table will be joined to Table 1 and grouped by DealerID and Tire.
Desired Output:
DealerIDTire RepairsOfThisTireRepairCount PercentOfTotalRepairOrders
1 235/60R18 102V4 10 40
1 225/65R17 102T3 10 30
1 205/55R16 89H1 10 10
2 225/65R17 102T1 3 33
The equation I am given to calculate the top tires per dealer is as follows: Total # of tires for the size / Total # of repair orders per dealer.
Here is what I have so far though I think I might have to rewrite all of it.
SELECT
DealerID ,
COUNT(RepairID)
INTO #TotalDealerRepairOrders
FROM
dbo.Table1
GROUP BY
DealerID
SELECT
[code].....
I need a query to find max serial number by comparing two different tables. Here is my requirementI am having two tables named Table1 and Table2. Each tables having more than 30,000,000 records.I want a simple query to find Max srno from two tables.For exampleIf Table1 max is 245 where partno=2 and ano=2and Table2 max is 343 where partno=2 and ano=2Then 343 is max serial noIf Table1 max is 435 where partno=2 and ano=2and Table2 max is 34 where partno=2 and ano=2Then 435 is max serial noI used this query but its taking more time select max(v.MaxSrNo) from ((select max(MaxSrNo) as MaxSrNo from Table1 where partno=@partno and ano=@ano)union all (select max(MaxSrNo) from Table2 where partno=@partno and ano=@ano)) as v Pls give me a simple query to find max srno.
View 3 Replies View RelatedGood morning !Anyone knows how can i change a SQL Server Serial number without uninstallit ?Thanks in advancedJLuis
View 1 Replies View RelatedI have a data set that looks something like like this:
Row# Data
1 A
2 B
3 B
4 A
5 B
6 B
7 A
8 A
9 A
I need wanting to assign a group ID to the data based on consecutive values. Here's what I need my data to look like:
Row# Data GroupID
1 A 1
2 B 2
3 B 2
4 A 3
5 B 4
6 B 4
7 A 5
8 A 5
9 A 5
You'll notice that there are only two values in DATA but whenever there is a flip between them, the GroupID increments.
select SERIALNO, Max(TIME)
from dbo.TASK A
join dbo.Status B
on A.TID=B.TID
where A.ID in ('1111',2222')
and A.TYPE='Pen'
group by B.SERIAL_NO, B.TIME
order by BM.TIME
For this query I may get serial no duplicates but times are unique
For that serial no, I have to find the recent time. But if I use group by, I am getting the wrong no
im trying to run a query, my first column should be serial number based on results, how can i do that for example
qry = "Select products, sum(prod_price), sum(prod_sellingprice) from sales group by products"
or
qry = "Select products, sellingperson from sales where seldate=#" & date() & "#"
i want first column of both queries as serial number based on results of query.
I have this table of Marks as shown below. All I need is to find the average Marks at various intervals of S.no. That is I need averages at every 3rd S.No. as shown.
S.No. Marks
1 ------ 5
2 ------ 5
3 ------ 6 1st Average Value here (16/3)
4 ------ 5
5 ------ 6
6 ------ 7 2nd Average Value here (18/3)
7 ------ 7
8 ------ 7
9 ------ 8 3rd Average Value here (22/3)
10 ----- 8
11 ----- 9
12 ----- 8 4th Average Value here (26/3)
So basically I need a new table which will have 4 average values for the table above. Of-course the table can be much bigger and the average values can be at any nth value of S.No.
I have Logs table and want to assign a serial number to the techs using the following query
Select
Date,
Case_ID,
Site,
Dept,
Tech,
Start_Time,
ROW_NUMBER () OVER (PARTITION BY Date, Site, Dept, Tech ORDER BY Start_Time) as Row_Num
FROM
Logs
Where Date = Getdate()
I get the following results.
Date Case ID Site DeptTechStart TimeRow_Num
7/28/14 10023 TartvilleMaintcAmy P.7:301
7/28/14 56789 TartvilleMaintcRem W.8:051
7/28/14 23098 TartvilleMaintcAmy P.8:352
7/28/14 70004 TartvilleMaintcAmy P.9:103
7/28/14 12708 TartvilleMaintcMag O.10:001
7/28/14 10004 TartvilleMaintcAmy P.12:304
7/28/14 40056 TartvilleServiceJoe F.7:301
7/28/14 23458 TartvilleServiceJoe F.7:552
7/28/14 69200 TartvilleServiceRus T. 7:301
Please notice the cases in Maintc department. See how Amy P.'s shift is broken by Rem W. and Mag O. But the Row Number does not recognize this, it still says Amy P's case as 2 and 4 the even though Rem's and Mag's cases were in between.
This is what I really wanted.
Date Case ID Site DeptTechStart TimeRow_Num
7/28/14 10023 TartvilleMaintcAmy P.7:301
7/28/14 56789 TartvilleMaintcRem W.8:051
7/28/14 23098 TartvilleMaintcAmy P.8:351
7/28/14 70004 TartvilleMaintcAmy P.9:102
7/28/14 12708 TartvilleMaintcMag O.10:001
7/28/14 10004 TartvilleMaintcAmy P.12:301
7/28/14 40056 TartvilleServiceJoe F.7:301
7/28/14 23458 TartvilleServiceJoe F.7:552
7/28/14 69200 TartvilleServiceRus T. 7:301
I tried many combination of columns for Partition by () and Order by () and the best I can get is the result at the top. How should I achieve it.
A vehicle loading confirm after that what time its gated out so i want to take the time duration between finish loading and gate out, find sample table records , i want to take more than 5 hrs difference between finish loading and gate out.
tld_tripno
tld_sno
tld_activitycode
tld_location
tld_actualdate
TLM3004242015
[Code] .....
I want to take the result like this
Tld_tripno
Finish Loading
Gate Out
Date and Time difference
TLM3004242015
2015-05-11 19:58:00
2015-05-12 08:42:00
12:44:00
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
Days_in_warehouse
20
30
40
Table 1 :
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40
Updated Table 1:
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40
How can I update Table 1 to see desired results?
I need to calculate the last two columns (noofgrp and grpsize) No of Groups (count of Clientid) and Group Size (number of clients in each group) according to begtim and endtime. So I tried the following in the first Temp table
GrpSize= count(clientid) over (partition by begtime,endtime) else 0 end
and in the second Temp Table, I have
select
,GrpSize=sum(grpsize)
,NoofGrp=count(distinct grpsize)
From Temp1
The issue is for the date of 5/26, the begtime and endtime are not consistent. in Grp1 (group 1) all clients starts the session at 1030 and ends at 1200 (90 minutes session) except one who starts at 11 and end at 1200 (row 8). For this client since his/her endtime is the same as others, I want that client to be in the first group(Grp1). Reverse is true for the second group (Grp2). All clients begtime is 12:30 and endtime is 1400 but clientid=2 (row 9) who begtime =1230 but endtime = 1300. However, since this client begtime is the same as the rest, I wan that client to be in the second group (grp2) My partition over creates 4 groups rather than two.
I work for an organization that repairs serialized devices. Each time a device is repaired it's serial number is recorded in a database table along with the date it was repaired along with other information about the device. There are multiple cases where a unit has been repaired more than once.
I am trying to write a query that will return the serial only once and that record will be the record of the latest repair date. To sum it up,
Return a list of serials where if a serial exists more than once in the table, return only the instance of the serial record(s) with the max(created_dt). The end result will be a list of distinct serial numbers.
Here is my Query. The problem I believe is in my sub-query but I am not sure how to structure it.
SELECT
S.Id
, RMA
, PinSerial
, L4Serial
, L4Model
[Code] ....
I am in need of converting serial date to regular date ie...735510.40461 and only need the hours, minutes and seconds, I have used the examples I've seen on different forums,
DATEADD(d, -1, DATEADD(m, DATEDIFF(m, '1900-1-1', getdate()) + 1, '1900-1-1'))
I have a query to run a report where the results has a column named “Due Date” which holds a date value based on the project submission date.Now, I need to add 4 columns named, “45 Days Expectant”, “30 Days Overdue”, “60 Days Overdue” and “90 Days Overdue”.I need to do a calculation based on the “Due Date” and “System (I mean default computer date) Date” that if “System Date” is 45 days+ to “Due Date” than put “Yes” in “45 Days Expectant” row.
Also, if “Due Date” is less than or equal to system date by 30 days, put “Yes” in “30 Days Overdue” and same for the 60 and 90 days.how to write this Case Statement? I have some answers how to do it in SSRS (Report Designer) but I want to get the results using T-SQl.
I have Table Like this
t_id w_id t_codew_name
358553680A1100EVM Method Project
358563680A1110EVM Method Project
358453684A1000Basic
358463684A1010Basic
358473685A1020Detail
[Code] ....
Hi folks,
I have a Projects , each project have many tasks now i want to display tasks replated to each project:
for example:
Project1-------------------->task1
task2
task3
task4
Project2----------------------->task4
task5
task6
.............................................projectN.....................
how to write query for this
i have 2 tables:
Project .......>columns are projectid
Task------------->columns are projectid, taskid
|
I'd like to ask how you would get the OUTPUT below from the TABLE below:
TABLE:
id category
1 A
2 C
3 A
4 A
5 B
6 C
7 B
OUTPUT:
category count id's
A 3 1,3,4
B 2 5,7
C 2 2,6
The code would go something like:
Select category, count(*), .... as id's
from TABLE
group by category
I just need to find that .... part.
I'm having a fight with Reporting Services at the minute when trying to compute an average at the row group level for a value summed in a column group.I have the following column groups:
Year
Month
Date
And the following row groups:
Region
Product
SubType (hidden, data at the date level is summed to Product)
At the moment I'm computing the average for SubType for each Date at the Product level (giving a decimal value), so for each day I end up with a nice average, that works. However I am unable to average that average over the whole Year for a Product. The issue being that I'm trying to combine Row Groups (Product) and Column Groups (Date/Year)
select top 15 count(*) as cnt, state from table
group by state
order by cnt desc
[code[...
Can the above three queries be combined into one and still be fast, if so how?What i am trying to go is an item count, by group, similar to ones Inbox in Outlook.
Hi all,
I have a Report and I have used Table in the report to define 5 levels of Sub Groupings: Group1, Group2, Group3, Group4, grpResourceBehavior.
The Sample data which comes is:
Group1 Group2 Group3 Group4 ResourceBehavior BgtHrs BgtAmt
A1 B1 C1 D1 NML 12 12
A1 B1 C1 D1 ODC 0 12
Now, to calculate a field "Cost", I have to use following condition. If the ResourceBehavior is NML, then Cost = BgtAmt/BgtHrs
But, if the ResourceBehavior is ODC, then COst = BgtAmt/(SUm of BgtHrs for the resourcebehavior NML)
I am not able to calculate the Sum of the BgtHrs for different ResourceBehavior. Also, I need this field calculation for each and every group as well, and this makes it all the more complicated.
Any help is appreciated.
Thanks in advance.
Swati
tblScore contains score for each problem
id problemID score
------------------------
1 1 10
2 2 30
tblSubmission contains problem submissions for each user
id user problemID accepted
-----------------------------------------------
1 UserA 1 0
2 UserA 1 0
3 UserA 1 1
4 UserA 2 1
5 UserB 1 0
6 UserB 1 1
7 UserB 2 1
For UserA :
- For problemID 1
-> submitted three times
-> rejected for first two submission and accepted on third submission.
- For problemID 2
-> submitted one time
-> accepted on first submission
For UserB :
- For problemID 1
-> submitted two times
-> rejected for first submission and accepted on second submission.
- For problemID 2
-> submitted one time
-> accepted on first submission
Now I would like to process the table and want to get the following result :
user Score
--------------------------
UserA 36 (6 + 30)
UserB 38 (8 + 30)
Explanation :
- For each rejected submission, a -2 point penalty.
- UserA have submitted probelmID 1
- > score of problemID 1 is 10.
- > first two times rejectd
- > third time accepted.
-> score = 10 - 4 = 6
- UserA have submitted problemID 2
- > score of problemID 2 is 30
- > first time accepted. No penalty will be counted
- > score = 30
so final score for UserA = 30 + 6 = 36
Similar for UserB.
Hello!
suppose i have two tables, table1 columns(empcode (pk), empDept) and table2 columns(empcode (FK),Date,Attendance) i wanted to write a query to get output like
DEPT ABSENT
-----------------------------
Accounts 10
EDP Section 0 **
Admin 2
Stationary 0**
if no employee is absent in the department it has to display Zero
Product IdIsPrimaryQuantity
P0011
P001.102
P001.204
P001.305
P0021
P002.106
P002.207
P002.309
P002.4010
P002.5011
Need the query for result each group shows multiplied value of group quantity and last row of the group is shown with NULL
Product IdSubProductQuantity
P001 40
P001 P001.3NULL
P002 41580
P002 P002.5NULL
This is same as [URL] ....
I have the following data:
POL# POL_EFF_DATE
123 1-1-2012
123 1-1-2012
123 1-1-2012
123 1-1-2013
123 1-1-2013
456 1-1-2012
456 1-1-2012
456 1-1-2013
456 1-1-2013
I want to add sequence number to each group with same Pol# and Effective Date like this:
POL# POL_EFF_DATE Seq
123 1-1-2012 1
123 1-1-2012 1
123 1-1-2012 1
123 1-1-2013 2
123 1-1-2013 2
456 1-1-2012 1
456 1-1-2012 1
456 1-1-2013 2
456 1-1-2013 2
is there a set based function to accomplish this in SQL 2008?
How would I get the rownumber() for a Group Footer in report designer not in my query?
I put the syntax rownumber(nothing), but it is giving me the row numbers for the detail section.
Any help would be appreciated.
Like many others, I have a large report that groups on invoices, and does a page break between each invoice. From reading other posts in this forum, I was able to reset the page number on the grouping, however, there are some things that I need to display only on the last page of each invoice, but I don't see how I will be able to determine when I'm on the last page for a particular invoice. Can I somehow determine up front the number of pages for a group so I know when I'm at the last page?
Any help is greatly appreciated!
I'm trying to select records that occur more than once. I'm trying to base this on the email column. So basically I want the query to look something like this:
select * from table where emailaddress count > 1
Can someone provide me with the correct syntax? :)
This my table named myData
CREATE TABLE [dbo].[myData](
[idx] [int] NULL,
[paymentMethod] [nvarchar](200) NULL,
[daerahKutipan] [int] NULL,
[payer] [int] NULL,
[code]....
I want to calculate the number of payer Group By paymentMethod. The number of payer must be divided by daerahKutipan. So far, my query as follow
select paymentMethod,
COUNT(CASE WHEN daerahKutipan = 1 THEN payer ELSE 0 END) figure_Seremban,
COUNT(CASE WHEN daerahKutipan = 3 THEN payer ELSE 0 END) figure_KualaPilah,
COUNT(CASE WHEN daerahKutipan = 4 THEN payer ELSE 0 END) figure_PortDickson,
COUNT(CASE WHEN daerahKutipan = 5 THEN payer ELSE 0 END) figure_Jelebu,
COUNT(CASE WHEN daerahKutipan = 6 THEN payer ELSE 0 END) figure_Tampin,
COUNT(CASE WHEN daerahKutipan = 7 THEN payer ELSE 0 END) figure_Rembau,
[code]....
I am using Reporting Services 2000. If you find out that Reporting Services 2005 would resolve this issue, please lemme know also. But I want to mention that I would prefer a way to fix this without changing Reporting Services versions.
I have a table that has a group on ProductTypes. This group is set to PageBreak at end.
What I need to do is to conditionally hide an entire column based on the current group's ProductType.
Examples
Page 1 = Product 1 = Column 1 is visible
Page 1 = Product 1 = Column 2 is visible
Page 2 = Product 2 = Column 1 is hidden
Page 2 = Product 2 = Column 1 is visible
Can you help me figure this one out ? I've tried everything I found on the net, especially everything on this page : http://blogs.msdn.com/chrishays/rss.xml
Thank you in advance.