I'm trying to select records that occur more than once. I'm trying to base this on the email column. So basically I want the query to look something like this:
select * from table where emailaddress count > 1
Can someone provide me with the correct syntax? :)
Ok, I have two parameters - @StartDate and @EndDate. We only care about the date part of these paramters. What I would like to do is create a table with one record for each date between these two values. For example:
@StartDate = '01/01/2008'
@EndDate = '01/8/2008'
Should yield a table with 9 records in it for every day between @StartDate and @EndDate like so:
01/01/2008 <datacol1> <datacol2>
01/02/2008 <datacol1> <datacol2>
01/03/2008 <datacol1> <datacol2>
01/04/2008 <datacol1> <datacol2>
01/05/2008 <datacol1> <datacol2>
01/06/2008 <datacol1> <datacol2>
01/07/2008 <datacol1> <datacol2>
01/08/2008 <datacol1> <datacol2>
I know I could just do a WHILE (@StartDate <= @EndDate) loop and insert records into a temp table but I'm looking to see if there are any new methods/techniques to achieve this with a more simple statement.
Dear All
I need to cerate a SP that SELECTS all the records from a table WHERE the first letter of each records starts with 'A' or 'B' or 'C' and so on. The letter is passed via a parameter from a aspx web page, I was wondering that someone can help me in the what TSQL to use I am not looking for a solution just a poin in the right direction. Can you help.
Thanks Ross
I have duplicate records in table.I need to count duplicate records based upon Account number and count will be stored in a variable.i need to check whether count > 0 or not in stored procedure.I have used below query.It is not working.
SELECT @_Stat_Count= count(*),L1.AcctNo,L1.ReceivedFileID from Legacy L1,Legacy L2,ReceivedFiles where L1.ReceivedFileID = ReceivedFiles.ReceivedFileID
and L1.AcctNo=L2.AcctNo group by L1.AcctNo,L1.ReceivedFileID having Count(*)> 0
IF (@_Stat_Count >0)
BEGIN
SELECT @Status = status_cd from status-table where status_id = 10
END
I have a set of records that will always be the same. A template if you wanna call it that.
"SELECT ID, Field1, Field2, Field3, Field4, Field5, Field6, Field7 FROM TABLE WHERE Field2 = 000"
This returns a 20 record set. The user will click a button and create another set of 20 records, where they can make changes accordingly.
Dear Friends!
i have one table namely details
empid type qty
emp1 bucket 5
emp2 bucket 5
emp4 Book 5
emp5 Lux 5
.. .. ..
.. .. ..
nenp n n
Every end of the day i need select total no of type and qty.i have milions of records in the table
ex bucket 100
book 300
How it is possible
Regards
Umapathy
Dear GroupI wonder whether you can give me a syntax example for a SQL Statement.Lets assume I've a table containing three columns ContactID (Primary Key),Firstname and Lastname.I would like to write a stored procedure which returns me the first tenrecords and increments an outside variable each time it runs.E.g If I run it the first time I pass the variable as 0 and it will returnme the first ten records and returns the variable value 1.When run a second time, I will pass the variable as 1 and it will return merecords 11-20 and sets the variable to 2 and so on...The difficult thing is how to tell to return me records 11-20. I can't usethe ContactID as someone might have deleted a row and e.g. ContactID 18 ismissing. In this case I only would get 9 rows returned. It always should beten.Thanks very much for your time and efforts!Kind Regards,Martin"There are 10 types of people in this world: Those that understand binaryarithmetic, and those that don't."
View 3 Replies View RelatedI have a table that holds notes for item's. I'm want to do a select statement where one of my columns assigns a sequential value to each row based on the item number. Would like data to look like this where doc_no would be my row_number function:
item_no seq_no note doc_no
ABC 1 blah 1
ABC 2 blahh 1
ABC 3 bla3 1
XYZ 1 more n 2
XYZ 2 another 2
EFG 1 blahhh 3
I am trying to select records based on a year.
DECLARE @Date
SET @Date = 2012
DECLARE @Year int
SET @Year = (SELECT DATEPART(yyyy,@Date))
SELECT @Year AS Year
--SELECT *
-- FROM [Orders].[dbo].[Orders] od
-- WHERE .Orderl_Date < @Date;
----WHERE DATEPART(yyyy,@Date)= @Year
----WHERE DATEPART(yyyy,od.Order_Date)= @ArchiveYear
DECLARE @Date
SET @Date = 2012
DECLARE @Year int
SET @Year = (SELECT DATEPART(yyyy,@Date))
SELECT @Year AS Year
--SELECT *
-- FROM [Orders].[dbo].[Orders] od
-- WHERE .Orderl_Date < @Date;
----WHERE DATEPART(yyyy,@Date)= @Year
----WHERE DATEPART(yyyy,od.Order_Date)= @ArchiveYear
I have a sql line that selects records:
select * from prodstatistics order by shift_started desc
I do not need to read the entire table and want to limit the read to the first 500 records. How would I embedd that in my current statement?
Thank you.
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
I have a large table of customers. I would like to add a column that contains an integer, unique to that customer. The trick is that this file contains many duplicate customers, so I want the duplicates to all have the same number between them.the numbers dont have to be sequential or anything, just like customers having the same one.
View 8 Replies View RelatedGot this query and I need the following result;
declare @NumberToCompareTo int
set @NumberToCompareTo = 8
declare @table table
(
number int
)
insert into @table
select 4
[Code] ....
The query selects 4 and 5 of course. Now what I'm looking for is to retrieve the number less or equal to @NumberToCompareTo, I mean the most immediate less number than the parameter. So in this case 5
1. how to show page number & total page number in report body?
2. how to show total records number?
I have a report that uses different datasets based on the year selected by a user.
I have a year_id parameter that sets a report variable named dataset_chosen. I have varified that these are working correctly together.
I have attempted populating table cell data to display from the chosen dataset. As yet to no avail.
How could I display data from the dataset a user selects via the year_id options?
Hello
Im searching for a solution to set all matrix row or cell the same height.
it schoud looks like this example:
This is a simple matrix
test a
text b
text c
text d
text e
text f
text g
This is a matrix with all the same row-height.
test a
text b
.
text c
.
.
text d
text e
text f
text g
.
.
Thx you a lot
The select command below will output one patient’s information in 1 row:
Patient id
Last name
First name
Address 1
OP Coverage Plan 1
OP Policy # 1
OP Coverage Plan 2
[code]...
This works great if there is at least one OP coverage. There are 3 tables in which to get information which are the patient table, the coverage table, and the coverage history table. The coverage table links to the patient table via pat_id and it tells me the patient's coverage plan and in which priority to bill. The coverage history table links to the patient and coverage table via patient id and coverage plan and it gives me the effective date.
select src.pat_id, lname, fname, addr1,
max(case when rn = 1 then src.coverage_plan_ end) as OP_Coverage1,
max(case when rn = 1 then src.policy_id end) as OP_Policy1,
code]...
Hi!
I have a table called DB1 that contains this:
MID
IIN
NUM_EVENTS
DATE
MID, IIN and NUM_EVENTS are composite keys. and only NUM_EVENTS get incremented. All records start with NUM_EVENTS = 1.How can I create a query that only displays those records that only NUM_EVENTS = 1 meaning their still on the first stage of processing?
I have a requirement regarding a color combination data. I have a lookup table that holds a colorid, p1, p2, p3, p4 to p8 which will be having colors Red, Green and Amber. P1 to P8 columns holds these three colors based on their combinations.
I have attached the look up table data for reference.
I need to pass the color values to p1 to p8 and need to retrieve the color id based on the passed color.
If we pass values for all p1 to p8 then it is easy to get the color code, however it will not happen. The passed values may be dynamic. ie we will not have all 8 values all the times. sometimes we will have 2 colors passed, sometimes 5 colors will be passed.
If i pass only two colors say red and red, i need the color id of only the row that has red and red for p1 and p2 alone. i dont want want all the colorid's that has red and red in p1 and p2 and some other colors in p3 to p4.
The exact colorid of the combination must be returned on passing the values to p1 and p2.
To elaborate; I am passing Red and Red as values to P1 and P2. In the look up table we can have 10 rows that has red and red i p1 and p2 like
colorid p1p2p3p4p5p6p7p8
1 redred
10 redredred
20 redredred
30 redredredred
40 redredredredred
50 redredredredredred
60 redredredredredredred
70 redredredredredredredred
So the result must have only the colorid 1 and not all the colorid's listed above. when I pass 3 red as values for p1, p2, p3 then the result must be 10. Colorid 1, 20, 30, 40, 50, 60 and 70 must not come in the result.
I need a function or procedure that will accept the arguments and provide me the result based on the values.
[URL]
I need a new field added 'Field1' which will add SEQUENCE number 1,2,.. based ON GROUP BY MasterID..AND another field TotalCount which will COUNT total masterID (here it will be 2)
CREATE TABLE #Temp1
( MasterID INT,
ClientName VARCHAR(10),
ProductName VARCHAR(50)
[code]...
writing the procedure for incrementing the number based on alphabets from A-Z
for example:
if alphabet is A then increment should be A001,next A002..etc
if alphabet is B then increment should be B001,next B002...etc
.
.
.
.
if alphabet is Z then increment should be Z001,next Z002...etc
Hi!
I have a table called DB1 that contains this:
MID
IIN
NUM_EVENTS
DATE
MID, IIN and NUM_EVENTS are composite keys. and only NUM_EVENTS get incremented. All records start with NUM_EVENTS = 1.How can I create a query that only displays those records that only NUM_EVENTS = 1 meaning their still on the first stage of processing?
$3.99/yr .COM!
http://www.greatdomains4less.com
The below data come from table table1. Instead of below result Ex1: I need output similar to the ex2.
Ex1:
CaseNumberStart CaseNumberEndExported
15000013150000131
15000014150000141
15000504150005041
15000505150005051
Ex2:
CaseNumberStart CaseNumberEndExported
15000013150000142
15000504150005052
How to get the result similar to Ex2, instead of Ex1. (ie., case-number is in sequential order then no need to break), And it should suit large dataset, I will finetune, if any performance issue.
I have a table Customer with below column
CustomerNumber , FName,LName,DOB
I have either 2 or 1 row for each customer number I want to write a SQL to pull data into 1 table based on same CustomerNumber, if only one row is present for the particular customer number it should pull null in FName2,LName2,DOB2 columns.
example:
CustNumber Fanme Lname DOB
1 Sam tiller 08/26/1981
1 Joe timy 01/02/1986
2 jack niks 09/09/1990
Result I want:
CustNumber Fname1 Lname1 DOB1 Fname2 Lname2 DOB2
1 Sam Tiller 08/26/1981 Joe timy 01/02/1986
2 Jack niks 09/09/1990 null null null
Below is the resultset I got using the following SQL statement
SELECT ROW_NUMBER() OVER (PARTITION BY ID ORDER BY create_date DESC) AS RowNum
,ID
,create_date
,NULL AS end_date
FROM dbo.Table_1
Resultset:
RowNum ID
create_date end_date
1 0001
2015-02-18 NULL
2 0001
2014-04-28 NULL
[Code] ....
Now, I want to update the end_date column with the create_date's values for the next row_number. Desired output is shown below:
RowNum ID
create_date end_date
1 0001
2015-02-18 NULL
2 0001
2014-04-28 2015-02-18
[Code] ....
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
Days_in_warehouse
20
30
40
Table 1 :
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40
Updated Table 1:
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40
how can I update Table 1 to get desired results?
I have 3 columns. I would like to update a table based on job_cd and permit_nbr column. if we have same job_cd and permit_nbr, reference number should be same else it should take max(reference number) from the table +1 for all rows where reference_nbr column is null
job_cd permit_nbr reference_nbr
ABC1 990 100002
ABC1 990 100002
ABC1 991 100003
ABC1 992 100004
ABC1 993 100005
ABC2 880 100006
ABC2 881 100007
ABC2 881 100007
ABC2 882 100008
ABC2 882 100008
Hi,
I want to the users to specify the number of TOPn records to be returned by the query.It has to be a query and not a stored proceedure.
Thanx
HI EVERYBODY
This is my procedure
"
CREATE PROCEDURE SP_SAMPLE_SEARCH
@Title nvarchar(256)
AS
SELECT ID,Title,Price FROM [tbl_Sim] WHERE ([Title] LIKE '%' + @Title + '%') Order by Price desc
GO
"
I exec procedure and it returns 12 results with diffirents ID
and want to get these values 1,2,3....12
How do I get these...
I am a beginner.
Thanks for help..
I'm using SQLCE. I'm using this sql statement:
sSQL = "Select Top (5) fldStatus,
Count(fldStatus) As CountOfSummaryItem From tbl_Records_DR GROUP BY
fldStatus;"
It gets the top 5 of fldStatus but I need the top 5 of CountOfSummaryItem.
Hi! I have a table Tbl1 has to columns:
A B
_________
Ibm Me
Sony Me
Me Bob
Me Frank
I'd like to select all rows where B=ME and A=Me Thanks for the help
I have two tables and they have a foreign key relationship. It will be a 1 to Many realationship.
Table1- the primary key table has the following columns
ContentID - int identity field
DateAdded- datetime
Table2 - The foreign key table, has the following relevant fields
FK - int foreign key
version - int
When an initial record is added there is a record added to each table. The ContentID in Table1 will match the FK field in Table2. Then a user will be able to "edit" the record in Table2, but instead of writing over the record that is already there, a new record will be added to Table2. I would like to calculate the version field where each time a record is added for the particular ContentID/FK it adds 1 to the last version that was added to that particular ContentID/FK.
Does that make sense. I am trying to implement some type of revision tracking for my CMS that I am building and this is the only way I can come up with because my client is worried that somebody will go in and make incorrect changes to their site and they want to be able to roll it back to a previous version.
I would appreciate any ideas.
Thanks,
laura