Transact SQL :: Update Table With Max Value And Row Number (based On 2 Column Partitions)
Sep 15, 2015
I have 3 columns. I would like to update a table based on job_cd and permit_nbr column. if we have same job_cd and permit_nbr, reference number should be same else it should take max(reference number) from the table +1 for all rows where reference_nbr column is null
I have a Users Table. It is full of users already and I would like to start using the UserPIN in the software (this is an nvarchar column).
I would like to update the UserPIN column with the row_number. All of my efforts have resulted in setting the UserPIN to 1 for every record. I just want an update query that fill the UserPIN column in sequential order.
I would like to update the flag of the promotion ID should the promotion ID date range overlap with Promotion ID(All) Date Range. The general logic is as below.
Update TableName SET PromotionID Flag = 1 AND Reason = 'Overlap with row ID(Overlap row ID number)' Where EACH ROW(Except with Promotion ID ALL) Date Range Overlap with ROW(with promotion ID ALL) Date range
Table: classes Columns: classID, hp Table: char_active Columns: name, classID, hp
The classes table is already populated.
What I want to do is insert a new row into char_active using the name and classID column, and have the HP column auto populate based on the corresponding value in the classes table. This is the trigger I wrote but I'm getting the error
Incorrect syntax near 'inserted'.
I'm new to sql, this is actually the first trigger I've tried writing.
create trigger new_hp on curr_chars.char_active instead of insert as declare @hp tinyint select @hp=lists.classes.hp from lists.classes where lists.classes.classID=inserted.classID insert into curr_chars.char_active (name, classID, hp) inserted.name, inserted.classID, @hp go
I'm hoping someone can help with with a task I've been given. I need to write a trigger which will act effectively as a method of automatically distributing of incoming call ticket records. See DDL below for creation of the Assignment table, which holds information on the call ticket workload.
SELECT COUNT(CallID) AS [Total Calls], AssignmentGroup, Assignee FROM #Assignment GROUP BY AssignmentGroup, Assignee ORDER BY COUNT(CallID) DESC , AssignmentGroup, Assignee
What I need to do is write a trigger for on INSERT to automatically update the Assignee column with the name of the person who currently has the least active calls. For example, using the data above, the next PC Support call will go to Mickey Mouse, and the next two Service Desk calls will go to Jim Smith.
So, the logic for the trigger would be
UPDATE #Assignment SET Assignee = (SELECT Assignee FROM #Assignment WHERE COUNT(CallID) = MIN(COUNT(CallID))
But that's only the logic, and obviously it doesn't work with the syntax being nothing like correct.
Does any one have an idea or pointers as to how I should go about this?
Table2 has three columns (i.e. Date, Count and Rule Type). Column “Rule Type “has a default value which is “XYZ”..Now I want to insert Data from Table1 to Table2. I am using following query:-
Column name or number of supplied values does not match table definition.I am using SQL 2012. I understand Table1 has 2 Columns but Table2 has 3 Columns. Is there anyway, I can move data from source table to Destination table where Destination Table has more number of Columns?
Hi, I have two tables. I want to update two columns in my first table,[ADD_BSL_SALES] and [ADD_BSL_COST] with two values [Sales] and[Costs] held in my #temp table but based on a RUN_DATE from my firsttable.Can anyone point me in the right direction?Thanks in Advance ?BryanCREATE TABLE [GROSMARG_AUDIT_ADDITION] ([RUN_DATE] [datetime] NULL ,[SALES_DIFF] [numeric](19, 6) NULL ,[COST_DIFF] [numeric](19, 6) NULL ,[ADD_BSL_SALES] [numeric](18, 0) NULL ,[ADD_BSL_COST] [numeric](18, 0) NULL ,[ADD_SALES_DIFF] [numeric](18, 0) NULL ,[ADD_COST_DIFF] [numeric](18, 0) NULL) ON [PRIMARY]GOINSERT RUN_DATE,datetime,INSERT SALES_DIFF,numeric(19,6),INSERT COST_DIFF,numeric(19,6)INSERT ADD_BSL_SALES,numeric(18,0),INSERT ADD_BSL_COST,numeric(18,0),INSERT ADD_SALES_DIFF,numeric(18,0)INSERT ADD_COST_DIFF,numeric(18,0)--- Second TableCREATE TABLE #DUPTOTALS[Sales][Costs]
I want to update Flag column in second table based on the Adder names.
If the Applicatiion has atleast one AIX and Adder name is UDB then the flag would be True. If the Application has more the one AIX and Adder names are diferent then the flag would be null.
APpName OS Adder
App1 ||| Windows|||Null App1 ||| Linux |||UDB App1 ||| AIX |||UDB App1 ||| Linux |||Sql
I upload data from a Txt File(Txt_Temp) where I have VinNumber with 6 digits. Another table name Resrve_Temp1 where I have Vinumber with 17 digit. Now I need to update the vinnumber 6 digit to 17 digit or to new column in Txt_temp.
Txt_Temp - Table
I tried this code with no succes and only one row is updating
update Txt_Temp Set Txt_Temp.Vinnumber=dbo.R_ResrvStock.Vin from dbo.R_ResrvStock inner join Txt_Temp on Right (dbo.R_ResrvStock.Vin,6)=Txt_Temp.VinNumber
OR Add this code in view
Select dbo.R_ResrvStock.Vin,R_Txt_Temp.Vinnumber,R_Txt_Te mp.Model_Code from dbo.R_ResrvStock inner join R_Txt_Temp on Right (dbo.R_ResrvStock.Vin,6)=R_Txt_Temp.VinNumber
I have a table #vert where I have value column. This data needs to be updated into two channel columns in #hori table based on channel number in #vert table.
CREATE TABLE #Vert (FILTER VARCHAR(3), CHANNEL TINYINT, VALUE TINYINT) INSERT #Vert Values('ABC', 1, 22),('ABC', 2, 32),('BBC', 1, 12),('BBC', 2, 23),('CAB', 1, 33),('CAB', 2, 44) -- COMBINATION OF FILTER AND CHANNEL IS UNIQUE CREATE TABLE #Hori (FILTER VARCHAR(3), CHANNEL1 TINYINT, CHANNEL2 TINYINT) INSERT #Hori Values ('ABC', NULL, NULL),('BBC', NULL, NULL),('CAB', NULL, NULL) -- FILTER IS UNIQUE IN #HORI TABLE
One way to achieve this is to write two update statements. After update, the output you see is my desired output
UPDATE H SET CHANNEL1= VALUE FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER WHERE V.CHANNEL=1 -- updates only channel1 UPDATE H SET CHANNEL2= VALUE FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER WHERE V.CHANNEL=2 -- updates only channel2 SELECT * FROM #Hori -- this is desired output
my channels number grows in #vert table like 1,2,3,4...and so Channel3, Channel4....so on in #hori table. So I cannot keep writing too many update statements. One other way is to pivot #vert table and do single update into #hori table.
I am dynamically creating a job using sql script and it does work fine(It creates the job and when it's done it gets deleted as it's created dynamically. so I won't be having any job history at all in the system.). I want to update an existing table if the jobs fails and I am not sure how I can do that using t-sql script. Is that possible?I have an idea but not sure whether it works. In the job create script, can I include the code for if the job fails then go to step 2 and update the table column with the error??? If so, how can I retrieve the error???
I am trying to build a DIM table using a source table that has the following setup...
CREATE TABLE [dbo].[APPL_STATUSES]( [APPLICATIONS_ID] [varchar](10) NOT NULL, [POS] [decimal](10, 0) NOT NULL, [APPL_STATUS] [varchar](5) NULL, [APPL_STATUS_DATE] [datetime] NULL, [APPL_APPLICANT] [varchar](10) NULL) GO
[code]....
What I am trying to do is to break out the APPL_STATUS_DATE into a STATUS_START_DATE and an STATUS_END_DATE in a new table. I also need to be able to update the STATUS_END_DATE based on the previous day's date. Like so...
CREATE TABLE [dbo].[APPL_APPLICANT_STATUSES]( [APPLICATIONS_ID] [varchar](10) NOT NULL, [POS] [decimal](10, 0) NOT NULL, [APPL_STATUS] [varchar](5) NULL, [STATUS_START_DATE] [datetime] NULL, [STATUS_END_DATE] [datetime] NULL, [APPL_APPLICANT] [varchar](10) NULL) GO
I have either 2 or 1 row for each customer number I want to write a SQL to pull data into 1 table based on same CustomerNumber, if only one row is present for the particular customer number it should pull null in FName2,LName2,DOB2 columns.
example: CustNumber Fanme Lname DOB 1 Sam tiller 08/26/1981 1 Joe timy 01/02/1986 2 jack niks 09/09/1990
Result I want: CustNumber Fname1 Lname1 DOB1 Fname2 Lname2 DOB2 1 Sam Tiller 08/26/1981 Joe timy 01/02/1986 2 Jack niks 09/09/1990 null null null
TeamStatus T 1 Complete or Escalate T 2 Pick Up T 2 Resolve Case T 1 Pick Up T 1 Complete or Escalate T 1 Pick Up T 1 Complete or Escalate
I want to get he group based of Resolve Case value in Status Column. Anything before Resolve case will be considered as Group 1 and after Resolve Case status should be considered as Group 2. Below is desired new Group column,
Group TeamStatus Group 1 T 1Complete or Escalate T 2 Pick Up T 2 Resolve Case
Group 2 T 1Pick Up T 1Complete or Escalate T 1 Pick Up T 1 Complete or Escalate
This is on SQL Server 2008. Please find a detailed description and the file of the data, that I am working on.
Requirements:
1. If 'Channel' is not equal to "Omnibus" where the 'Trans Description'is equal to "Purchase" and "Redemption" for one purchase and one redemption that match on 'System' , 'Account TA Number' , 'Product Name' , 'Settled Date' , and where the 'Trade Amount' of the purchase and redemption is within 5%, then display those set of records.
2. If deemed wash trades, allow user to update the purchase and redemption pair 'Trans Description' from "Purchase" to "Exchange In" and 'Trans Description' from "Redemption" with "Exchange out"
System Channel Dealer Name Firm Name Product Cusip Product Name Product Share Class Trade ID Settled Date Account TA Number Trans Description Trade Amount
SCHWABPORTAL US - ASG MILLIMAN MILLIMAN 64128K777 Strategic Income Fund A 29806259 30-Jan-15 000BY00F2RW Redemption $ 25,68,458.15
> SELECT tranno ,mrno medrecno ,createdon,createdat,no_of_trans nooftrans FROM mytab WHERE mrno = 'MR1514' and tranno = 1111 ORDER BY no_of_trans tranno medrecno createdon createdat nooftrans
I am trying to calculate the the running total but also tried to reset to reset to zero based on a value of a column.
here I am trying to calculate the value of CalcVal column based on column Flag value...actually it is running total but it reset to zero if Flag value is 0.
Here is the example of data along with required column
I have a scenario to compare previous records based on each ID columns. For each ID, there would be few records, I have a column called "compare", We have to compare all Compare 1 records with Compare 0 Records. If Dt is lesser or equal to comparing DT, then show 0. Else 1
We always only one Compare 0 records in my table, so all compare 1 columns will compare with only one row per ID
My tables look like
Declare @tab1 table (ID Varchar(3), Dt Date, Compare Int) Insert Into @tab1 values ('101','2015-07-01',0) Insert Into @tab1 values ('101','2015-07-02',1) Insert Into @tab1 values ('101','2015-07-03',1) Insert Into @tab1 values ('101','2015-07-01',1) Insert Into @tab1 values ('101','2015-06-30',1)
Insert Into @tab1 values ('102','2015-07-01',0) Insert Into @tab1 values ('102','2015-07-02',1) Insert Into @tab1 values ('102','2015-07-01',1)
select * from @tab1
1.) In the above scenario for ID = '101', we have 5 records, first record has Compare value 0, which mean all other 4 records need to compare with this record only
2.) If Compare 1 record's Dt is less or equal to Compare 0's DT, then show 0 in next column
3.) If Compare 1 record's Dt is greater than Compare 0's DT, then show 1 in next column
I have a query running and returning 3 columns, user name, e-mail and device name
SELECT DISTINCT v_R_User.Full_User_Name0 AS 'User full Name', v_R_User.Mail0 AS 'E-Mail', _RES_COLL_DEV00144.Name FROM v_R_System INNER JOIN v_R_User ON v_R_System.User_Name0 = v_R_User.User_Name0 INNER JOIN _RES_COLL_DEV00144 ON v_R_User.User_Name0 = _RES_COLL_DEV00144.UserName INNER JOIN v_GS_COMPUTER_SYSTEM ON v_R_System.ResourceID = v_GS_COMPUTER_SYSTEM.ResourceID Where v_R_User.Mail0 <> '' ORDER BY 'User Full Name'
From here I would like to generate an e-mail to each user (like mail merge) to each user in the table an include their machine name. I can do it with PS, but rather have it run directly from SQL. Is it possible?
I have a requirement where i want to delete the records based on the Date column. I have table which contain the columns like machinename ,lasthardwarescandate
I want to delete the records based on the max(Lasthardwarescandate) i.e. latest one, column where the machine name is duplicate menace it repeats. So how would i remove the duplicate machine names based on the Lasthardwarescandate column(There are multiple entries for the Lasthardwarescandate so i want to fetch the latest date column).
Note: Duplication should be removed based on “Last Hardware Scan” date.
Only latest date should be considered from multiple records for the same system. "
I have 3 different companies that share the same ticket_types(CRMS System). I need to display the Ticket Types and the 3 company's Ticket Count:
Ticket Type | Company A Count | Company B Count | Company C Count
I can get the information individually for each company, but if a company doesn't have a ticket in one of the ticket_types, then it isn't displayed in a row. So, I tried to write the following, which isn't pulling back any data.
DECLARE @startdate date = '20150306' DECLARE @enddate date = '20151031' DECLARE @AcctGrp varchar(20) = '111' ;WITH TType AS ( SELECT ctp.description as TicketType
[Code] .....
If I run each SELECT individually from above (excluding the last SELECT), it works and I get the following:
TicketType AR Request Credit Availability/Rush Cancel Order Credit Card Payment Expedite Order Freight Quote
[Code] ...
How to get the query results? Am I even close to getting it right?
