SQL Server 2014 :: Count Duplicate Records Based Upon Account Number?
Jul 16, 2014
I have duplicate records in table.I need to count duplicate records based upon Account number and count will be stored in a variable.i need to check whether count > 0 or not in stored procedure.I have used below query.It is not working.
SELECT @_Stat_Count= count(*),L1.AcctNo,L1.ReceivedFileID from Legacy L1,Legacy L2,ReceivedFiles where L1.ReceivedFileID = ReceivedFiles.ReceivedFileID
and L1.AcctNo=L2.AcctNo group by L1.AcctNo,L1.ReceivedFileID having Count(*)> 0
IF (@_Stat_Count >0)
BEGIN
SELECT @Status = status_cd from status-table where status_id = 10
END
View 9 Replies
ADVERTISEMENT
Jul 16, 2015
I would like to know how to split the phone number into two columns based on - symbol Dynamically.
for example
Phone Number
123-12323
1234-1222
so output should be
code number
123 12323
1234 1222
View 1 Replies
View Related
May 6, 2014
So let's say I have a table Orders with columns: Order# and ReceiptDate. Order#'s may be duplicated (Could have same Order# with different ReceiptDate). I want to select Order#'s that go back 6 months from the last ReceiptDate for each Order#.
I can't just do something like:
SELECT *
FROM Orders
WHERE ReceiptDate >= add_months(date,-6)
because there could be Order#'s whose last ReceiptDate was earlier than 6 months ago. I want to capture all of the instances of each Order# going back 6 months from each last ReceiptDate relative to each Order#.
View 9 Replies
View Related
Aug 6, 2014
I'm trying to do the following and haven't been able to figure it out.
Say there's a table with these records:
Col1 Col2 Col3
a b c
a b c
a b d
e f g
e f g
I want to generate a number that represents the groups of columns like this:
Col1 Col2 Col3 MyNumber
a b c 1
a b c 1
a b d 2
e f g 3
e f g 3
So that each grouping gets its own identifier. I've tried this:
SELECT Col1, Col2, Col3
row_number() OVER (PARTITION BY Col1, Col2, Col3
ORDER BY Col1, Col2, Col3) AS MyNumber
FROM MyTable
But I get this:
Col1 Col2 Col3 MyNumber
a b c 1
a b c 2
a b d 1
e f g 1
e f g 2
View 9 Replies
View Related
Jul 6, 2015
I need to group up the records randomly into ‘n’ number of batches. That can be done by NTILE, but I want group up similar records in single group.
Say for example, following is the list of records I have in my table which I want to group into 5 batches
A123
A124
A124
A123
A127
After Ntile I will get the below,
Desired output is, Need output like Ntile but all same id should reside in single batch
Even if I n=5, maximum possibility of batches are 3 only.
View 2 Replies
View Related
Jul 28, 2014
How can I pull out duplicate records based on certain fields?
Table called Bank
I want to pull out records that have duplicate inv_no, cus_no, amount,ordernum
Not all the fields are the same in each record. But I want the records that have these fields that are the same.
View 1 Replies
View Related
Jul 28, 2015
I have a requirement where i want to delete the records based on the Date column. I have table which contain the columns like machinename ,lasthardwarescandate
I want to delete the records based on the max(Lasthardwarescandate) i.e. latest one, column where the machine name is duplicate menace it repeats. So how would i remove the duplicate machine names based on the Lasthardwarescandate column(There are multiple entries for the Lasthardwarescandate so i want to fetch the latest date column).
Note: Duplication should be removed based on “Last Hardware Scan” date.
Only latest date should be considered from multiple records for the same system. "
View 4 Replies
View Related
Oct 15, 2007
Newbie alrt...
I am trying to create an asp page that will update an Access 2000 database. I need to update records if the user exists and create a new record if the user does not exist. Most of the variables are pulled from a separate "post" form.
I am using 2 pieces of info to find duplicates, as employee numbers can be assigned to multiple employees. Right now I have the page check for a duplicate employee id number then check for a duplicate last name. Unfortunately it is running each check separately, so if the last name is duplicated anywhere, it is sending a duplicated value.
here is the chunk of code in question... all RF_variables are request.form variables
cnt="SELECT COUNT(emp_id) AS Xnum FROM " & RF_course
cnt=cnt & " WHERE emp_id='" & RF_emp_id & "'"
set again=conn.Execute(cnt)
dup=again("Xnum")
if dup>=1 then
cnt="SELECT COUNT(lname) AS Xnum FROM " & RF_course
cnt=cnt & " WHERE lname='" & RF_lname & "'"
set again=conn.Execute(cnt)
dupl=again("Xnum")
if dupl=1 then
upd="UPDATE " & RF_course & " SET "
upd=upd & "section" & RF_section & "='" & RF_score & "'"
upd=upd & " WHERE emp_id='" & RF_emp_id & "'"
upd=upd & " AND lname='" & RF_lname & "'"
on error resume next
conn.Execute upd
else
ins="INSERT INTO " & RF_course
ins=ins & " (lname,fname,emp_id,cname,"
ins=ins & "section" & RF_section & ")"
ins=ins & " VALUES "
ins=ins & "('" & RF_lname & "',"
ins=ins & "'" & RF_fname & "',"
ins=ins & "'" & RF_emp_id & "',"
ins=ins & "'" & RF_cname & "',"
ins=ins & "'" & RF_score & "')"
on error resume next
conn.Execute ins
end if
else
ins="INSERT INTO " & RF_course
ins=ins & " (lname,fname,emp_id,cname,"
ins=ins & "section" & RF_section & ")"
ins=ins & " VALUES "
ins=ins & "('" & RF_lname & "',"
ins=ins & "'" & RF_fname & "',"
ins=ins & "'" & RF_emp_id & "',"
ins=ins & "'" & RF_cname & "',"
ins=ins & "'" & RF_score & "')"
on error resume next
conn.Execute ins
end if
Hopefully this is understandable.
If anyone can offer any help I would greatly appreciate it.
Thanks
View 1 Replies
View Related
Feb 26, 2008
hi
can anyone tell me how to count number of records(rows) in a table without using "COUNT" function.for practise iam trying to implement it through queries.
View 6 Replies
View Related
May 13, 2008
Using linq what would be the most efficient method of counting the number of users in the users table?
View 2 Replies
View Related
Jun 7, 2014
I'm trying to do some analysis on duplicate records based off of several match keys. I have a data set of approximately 30,000 people and the goal is to determine how many duplicate matches are in the system.
How would I write an SQL statement that looks for the following pieces of information. (I'm not using one person as an example; I need to do an analysis on the entire data set)
First name (exact match)
Last name (exact match)
Address line 1 (exact match)
Postal code/zip (exact match)
First Initial (exact match)
Last name (exact match)
DOB exact match
Postal code/zip (exact match)
View 1 Replies
View Related
Mar 14, 2008
My SQL is very basic. How do I create a query that will accept a parameter, an integer, and based on the integer, locate all the matches in a db?
SELECT COUNT(*) AS Expr1, tblArticle.ArticleIDFROM tblArticle INNER JOIN tblArticleCategory ON tblArticle.ArticleCatID = tblArticleCategory.ACategoryIDGROUP BY tblArticle.ArticleID
This isn't setting up the query to request a parameter.What am I doing wrong here? I"m trying to get the total number of articles for a particular category ID.
View 3 Replies
View Related
Mar 8, 2006
I'm trying to select records that occur more than once. I'm trying to base this on the email column. So basically I want the query to look something like this:
select * from table where emailaddress count > 1
Can someone provide me with the correct syntax? :)
View 2 Replies
View Related
Sep 24, 2007
Hi guys,
Is there any function to get the total number of records in a specific table?
(SQL SERVER 2000).
Thanks in advance,
Aldo.
View 3 Replies
View Related
Sep 12, 2006
Example table structure:
Id int, PK
Name varchar
AddDate smalldatetime
Sample data:
Id Name AddDate
1 John 01/15/2005
2 Jane 01/18/2005
.
.
.
101 Jack 01/10/2006
102 Mary 02/20/2006
First, I need to find the month which has the most records, I finally produced the correct results using this query but I am not convinced it's the most efficient way, can anyone offer a comment or advice here?
select top 1 count(id), datename(mm, AddDate) mth, datepart(yy, AddDate) yr
from dbo.sampletable
group by datename(mm, AddDate), datepart(yy, AddDate)
order by count(id) desc
Also, I'm really having trouble trying to get the overall average of records per month. Can anyone suggest a query which will produce only one number as output?
View 3 Replies
View Related
Oct 12, 2015
I've been able to get this select query to work, but I'm not sure how to modify it to turn it into a DELETE query:
USE QSCTestENG
select p.[testid], COUNT(c.[testid])
FROM [dbo].[tblTestHeader] p
left outer join [dbo].[tblTestMeasurements] c ON p.[testid]=c.[testid]
where p.[model] = 'XPPowerCLC125US12'
group by p.[testid]
having COUNT(c.[testid]) <>48;
View 2 Replies
View Related
Mar 11, 2008
Ok, I have two parameters - @StartDate and @EndDate. We only care about the date part of these paramters. What I would like to do is create a table with one record for each date between these two values. For example:
@StartDate = '01/01/2008'
@EndDate = '01/8/2008'
Should yield a table with 9 records in it for every day between @StartDate and @EndDate like so:
01/01/2008 <datacol1> <datacol2>
01/02/2008 <datacol1> <datacol2>
01/03/2008 <datacol1> <datacol2>
01/04/2008 <datacol1> <datacol2>
01/05/2008 <datacol1> <datacol2>
01/06/2008 <datacol1> <datacol2>
01/07/2008 <datacol1> <datacol2>
01/08/2008 <datacol1> <datacol2>
I know I could just do a WHILE (@StartDate <= @EndDate) loop and insert records into a temp table but I'm looking to see if there are any new methods/techniques to achieve this with a more simple statement.
View 3 Replies
View Related
Jul 4, 2012
Code:
SELECT ((ACOS(SIN(34.37769 * PI() / 180) * SIN(latitude * PI() / 180)
+ COS(34.37769 * PI() / 180) * COS(latitude * PI() / 180) * COS((132.404738 - longitude)
* PI() / 180)) * 180 / PI()) * 60 * 1.1515) AS ranges FROM completeyuubinwithlatlon having ranges<=3
First, I have that code whenever i disregard the "having ranges<=3" it selects record but when I include it it returns error. The problem is I want to just select records with ranges less than 3 miles..how do I do that.. and I want to count the number of selected rows and store it on a column on the same table.
View 3 Replies
View Related
Nov 19, 2015
If I just use a simple select statement, I find that I have 8286 records within a specified date range.
If I use the select statement to pull records that were created from 5pm and later and then add it to another select statement with records created before 5pm, I get a different count: 7521 + 756 = 8277
Is there something I am doing incorrectly in the following sql?
DECLARE @startdate date = '03-06-2015'
DECLARE @enddate date = '10-31-2015'
DECLARE @afterTime time = '17:00'
SELECT
General_Count = (SELECT COUNT(*) as General FROM Unidata.CrumsTicket ct
[Code] ....
View 20 Replies
View Related
Apr 16, 2014
How to count the number of values that exist in a row based on the values from an array of numbers. Basically the the array of numbers I want to look for are in row 1 of table [test 1] and I want to search for them and count the "out of" in table [test 2]. Excuse me for not using the easiest way to convey my question below. I guess in short I have 10 numbers and like to find how many of those numbers exist in each row. short example:
Table Name: test1
Columns: m1 (int), m2 (int), m3 (int) >>> etc
Array/Row1: 1 2 3 4 5 6 7 8 9 10
------
Table Name: test2
Columns: n1 (int), n2 (int), n3 (int), n4 (int), n5 (int)
Row 1: 3, 8, 18, 77, 12
Row 2: 1, 4, 5, 7,18, 21
Row 3: 2, 4, 6, 8, 10
Answer: 2 out of 5
Answer: 4 out of 5
Answer: 5 out of 5
View 2 Replies
View Related
Oct 9, 2013
I'm trying to move specific data from three linked tables on a source database to three tables on a destination database by generating dynamic SQL INSERT scripts but am getting stuck on the last set of INSERT statements. I don't think I can use SSIS because the source autonumber fields may already exist on the destination side but I could be wrong.
For simplicity, Table 1 (T1) has one autonumber key of PK1 as well as other fields (A1, B1, etc.).
Table 2 (T2) has one autonumber key of PK2 and a foreign key (FK1) that links back to PK1 as well as other fields (A2, B2, etc.).
Table 3 (T3) has one autonumber key of PK3 and a foreign key (FK2) that links back to PK2 as well as other fields (A3, B3, etc.).
Like this:
T1: PK1, A1, B1, etc.
T2: PK2, FK1, A2, B2, etc.
T3: PK3, FK2, A3, B3, etc.
So, I'm able to query the source database T1 to generate my dynamic SQL INSERT statements that will be run on the destination side. I'm also able to generate my dynamic SQL statements to insert into T2 but when I get to T3 I currently am stuck figuring out how to insert because the destination side is unable to match it's FK2 to the just inserted PK2. It throws the below error.
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
View 3 Replies
View Related
Nov 22, 2014
If you were to do a fresh install it would set permissions on the disk so everything just works.
Now when changing the service account (e.g. to a domain user) use the configuration manager, does it do the same magic (possibly sans if the database data/log files are on another disk)? Or do you need to trawl through the dozens of folders and assign rights manually?
View 1 Replies
View Related
Sep 11, 2014
I want to fetch max of Field2 if duplicate records in Field1 and rest of the values of field1 , below is the sample format.
Field1 Field2 Field3 Field4
32 375 abc-xyz A
32 379 xyz-efg A
55 405 abc-xyz B
55 407 xyz-efg B
132 908 abc-xyz C
132 999 xyz-efg C
152 800 abc-xyz D
152 850 xyz-efg D
155 900 abc-xyz E
156 925 abc-xyz F
157 935 abc-xyz G
View 2 Replies
View Related
Jan 19, 2015
I found an article on the CodeProject website named T-SQL MapReduce. I'm trying to duplicate the SQL code there into a SQL Server 2914 Developer Edition database I've got, and also the C# code using Visual Studio. I've defined the user data types fine (e.g.: word_t, words_t and so on), but I got an error when I tried to create the UDF dbo.mapper from the page. The error I got was:
Msg 102, Level 15, State 1, Procedure mapper, Line 5
Incorrect syntax near 'CALLER'.
The SQL code I used is straight off of the page; it looks like this:
[code=sql]
create function dbo.mapper(@documents DocumentsWithAutoIncrementIndexTable READONLY, @sep nvarchar)
returns @t TABLE ( wordindex int, word word_t )
WITH EXECUTE AS CALLER
[/code]
What have I done wrong? I'm guessing that the author has done something like left off a variable declaration or something like that. what am I missing?
View 6 Replies
View Related
Feb 1, 2015
I have 3 Tables
TableA - TAID, Name, LastName
TableB - MaleFriendsName, MaleFriendsLastName [One to many]
TableC - FemaleFriendsName, FemaleFriendsLastName [one to many]
A query returns duplicate results from TableB as well as TableC
TableB and TableC have nothing in common and should not interfere with each other.
with TwoTables as (
select
a.QuickSpec as QuickSpecId,
[Code].....
Resultset returns duplicate values on TableB AND only for 1 record in the results [As per Lynn examples]
View 1 Replies
View Related
Sep 11, 2014
i have a table like below
create table staff_attendance
(
attendance_id int,
attendace_date datetime,
staff_id int,
working_year int,
hours int
)
values like
1 2014-06-30 00:00:00.0ST10121
2 2014-06-30 00:00:00.0ST10122
3 2014-06-30 00:00:00.0ST10122 ----same entry like previous one
4 2014-07-01 00:00:00.0ST10121
5 2014-07-01 00:00:00.0ST10122
6 2014-07-02 00:00:00.0ST10121
7 2014-07-02 00:00:00.0ST10122
8 2014-06-30 00:00:00.0ST10221
9 2014-06-30 00:00:00.0ST10222
10 2014-07-01 00:00:00.0ST1022 1
11 2014-07-01 00:00:00.0ST102 22
12 2014-07-02 00:00:00.0ST102 21
13 2014-07-02 00:00:00.0ST102 22
I Need to find the duplicate rows like same entries which is having more than 1 rows.... how do i find?
View 3 Replies
View Related
Aug 4, 2014
I have an issue where I am getting an error on an unique index.
I know why I am getting the error but not sure how to get around it.
The query does a check on whether a unique value exists in the Insert/Select. If I run it one record at a time (SELECT TOP 1...) it works fine and just won't update it if the record exists.
But if I do it in a batch, I get the error. I assume this is because it does the checking on the file before records are written out and then writes out the records one at a time from a temporary table.
It thinks all the records are unique because it compares the records one at a time to the original table (where there would be no duplicates). But it doesn't check the records against each other. Then when it actually writes out the record, the duplicate is there.
How do I do a batch where the Insert/Select would write out the records without the duplicates as it does when I do it one record at a time.
CREATE TABLE #TestTable
(
Name varchar(50),
Email varchar (40)
)
Insert #TestTable (Name,Email) Values('Tom', 'tom@aol.com')
[Code] .....
View 1 Replies
View Related
Jun 8, 2015
We have the below query which is pulling in Sales and Revenue information. Since the sale is recorded in just one month and the revenue is recorded each month, we need to have the results of this query to only list the Sales amount once, but still have all the other revenue amounts listed for each month. In this example, the sale is record in year 2014 and month 10, but there are revenues in every month as well for the rest of 2014 and the start of 2015 but we only want to the sales amount to appear once on this results set.
SELECT
project.project_number,
project.country_code,
project.project_desc,
gsl.global_service_line_desc,
buy.buyer_desc,
[Code] ....
View 9 Replies
View Related
Jun 12, 2014
I have the following code to send out an email if the row count of a table exceeds a certain number. But it seems to fire an email alert no matter what. condition check part of the code?
use msdb
go
create table ##resultset (
total int)
[code]...
View 5 Replies
View Related
Mar 20, 2014
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
View 0 Replies
View Related
Mar 10, 2014
I want the count of orders of a particular table on weekly basis i.e if date given to me is 10/3/2014 then my output should be count of orders from date 10/3/2014 to 09/3/2014(one week) then count of orders from 2/3/2014 to 08/3/2014(another week) and then from 24/2/2014 to 01/3/2014(another week).....
View 5 Replies
View Related
May 26, 2015
How can I select data from a table and row counts from multiple tables in a view. For example:
Select * from Settings -- it gets 1 row only
Select count(*) from NewApps where Status = 'False'
Select count(*) from myUsers where Status = 'Pending'
I just want to get them all in 1 view...
View 1 Replies
View Related
Jun 18, 2015
I have two table in two different database. I have to found count for both table and put into other table.
example : Database --> A , table is T1
Database --> B , table is T2
I want count of both table and put into T3 table in database A or B .
View 7 Replies
View Related