I have a date held in a varchar field in a temporary sql table and I want to convert it into a sql date and it doesn't work. I can replicate this as below -
So I run
select
cast ('14/02/2014' as date)
and I get a conversion failed error.
I'm writing a view to check record counts in a table that has numerous datasets and therefore various "Activity Dates". Is it possible as part of the SQL statement to have a CASE statement for example so that it can identify the field to use as the activity date?
The field to use is being identified using a seperate table so at the moment I have CASE WHEN FieldToUse = '2' THEN MapCol ELSE '[Activity_Date]' END, where FieldToUse = '2' identifies the date field to use and the MapCol data is the field name to be used as the activity date.
Is this even possible?
I am trying to populate a field in a SQL table based on the valuesreturned from using substring on a text field.Example:Field Name = RecNumField Value = 024071023The 7th and 8th character of this number is the year. I am able toget those digits by saying substring(recnum,7,2) and I get '02'. Nowwhat I need to do is determine if this is >= 50 then concatenate a'19' to the front of it or if it is less that '50' concatenate a '20'.This particular example should return '2002'. Then I want to take theresult of this and populate a field called TaxYear.Any help would be greatly apprecaietd.Mark
View 2 Replies View RelatedHi,
I am very new to using SQL. Our department usually uses Brio to query the various databases under our control. However, I have recently come against a problem that prompted me to create a custom SQL query which works well as far as it goes. My problem is looking for specific conditions in billing information I receive monthly. I would like to compare on of the date fields contained in the database with a field in the form of YYYYMM (200710, for October 2007) I have created a custom column generator that forms a date from the YYYYMM. I would like, however, do the translation on the fly and make the comparison during the query. The problem is that query without the date check returns a mass of data, only about 1 percent of which is what I want.
The beginning of the SQL query looks like this:
FROM From.T_Crs_Tran_Dtl WHERE T_Crs_Tran_Dtl.Crs_Bill_Yr_Mo IN ('200710', '200711', '200712') AND ((T_Crs_Tran_Dtl.Crs_Cde IN ('1G', '1V') AND (T_Crs_Tran_Dtl.Dptr_Dte < LastDay(ToDate(Substr ( Crs_Bill_Yr_Mo, 5, 2 )& "/1/"&Substr ( Crs_Bill_Yr_Mo, 1, 4 )))) AND (T_Crs_Tran_Dtl.Prev_Stats_Cde IN (' ', 'TK', 'TL') AND T_Crs_Tran_Dtl.Cur_Stats_Cde IN ('TK', 'TL') AND T_Crs_Tran_Dtl.Std_Tran_Typ_Cde='B') OR (T_Crs_Tran_Dtl.Prev_Stats_Cde='UN' AND T_Crs_Tran_Dtl.Cur_Stats_Cde='XX' AND
It is the (T_Crs_Tran_Dtl.Dptr_Dte < LastDay(ToDate(Substr ( Crs_Bill_Yr_Mo, 5, 2 )& "/1/"&Substr ( Crs_Bill_Yr_Mo, 1, 4 )))) AND? part of the query that is just plain wrong. The business part of this statement takes the YYYYMM field and turns it into a date which is the last day of YYYYMM.
I hope someone out there can help me with making this comparison.
I appreciate your help.
Bill
Hi,
I'm attempting to use the following code to display either 'All' or the date value selected by the user from a Report parameter;
=iif(Parameters!FromCheckOutDateDate.Value.ToString = "[Check Out Date].[Date].[All]", "All", "From Date: " + Parameters!FromCheckOutDateDate.Value.ToString.Substring(26,10))
This is throwing an error ('#Error').
I can use the following code with no error, though its not as useful;
=iif(Parameters!FromCheckOutDateDate.Value.ToString = "[Check Out Date].[Date].[All]", "All", "Not all")
I can even use this to display the selected value (i.e. 2007-01-01);
Parameters!FromCheckOutDateDate.Value.ToString.Substring(26,10)
Why can't I use them both in my iif statement?
Can someone please help?
My goal is to select values from the same date range for a month on month view to compare values month over month. I've tried using the date trunc function but I'm not sure what the best way to attack this is. My thoughts are I need to somehow select first day of every month + interval 'x days' (but I don't know the syntax).In other words, I want to see
Select
Jan 1- 23rd
feb 1-23rd
march 1-23rd
april 1-23rd
,value
from
table
How to convert MM/YYYY to MM/DD/YYYY and also YYYY to 01/01/YYYY.
This column is text column and has many other inputs.
I have two tables like,
create table dbo.#Status(
ID varchar(50),
Status varchar(50),
EffectiveStartDate datetime,
EffectiveEndDate datetime,
Is_Current bit
[code].....
I want result as the attached image.
Create table query for result is: CREATE TABLE dbo.#Result(
ID varchar(50),
Fee varchar(100),
Bill varchar(50),
A_Date date,
B_Date date,
Status VARCHAR(50),
EffectiveStartDate datetime,
EffectiveEndDate datetime
)
how to achieve this in sql server 2012.
Hi there.
I'm trying to extract data from my SQL server & everything in the script I've got is working (extracting correct data) except for one field - which is for the most part it's off by +2 days (on a few occasions - I see it off by just +1 day or even +3, but it's usually the +2 days).
I'm told that it's due to the conversion formula - but - since SQL is not my native language, I'm at a bit of a loss.
The DB table has the date field stored as a type: CHAR (as opposed to 'DATE')
Can anyone out there help?
Please advise. Thanks.
Best.
K7
A date field in a report returns the date value as:
2015-07-01 13:30:27.000
Is there any way I can script this to appear as:
01 July 2015 (or 01-07-2015 or 01/07/2015) - basically to cut out the hours, minutes and seconds?
The best I have managed is: CONVERT (varchar(17),DATE,113) AS Date1 but this still leaves me with:
01 July 2015 13:30
Hi,
Basically the above is a very common requirement, please comment on my solution which I've arrived at by searching through the web; -
In summary I have used 3 SSIS components these are "Flat File Source", "Derived Column" and "SQL Server Destination".
1) File Connections Manager Editor
1.1) Within File Connections Manager Editor; -
Name the data type e.g. "INTERCHANGE_NET_APP_DATE_SRC"
and assign a type to the data type e.g. string[DT_STR]
1.2) Click on the Preview button to ensure the expected text is assigned to the expected data type.
2) Derived Column Transformation Editor
2.1) Assign Derived Column Name, e.g.
INTERCHANGE_NET_APP_DATE
2.2) Select <add as new column> within Derived Column.
2.3) Enter the conversion Expression, e.g. ; -
2.3.1)
(SUBSTRING(INTERCHANGE_NET_APP_DATE_SRC,8,2) + "/" + SUBSTRING(INTERCHANGE_NET_APP_DATE_SRC,5,2) + "/" + SUBSTRING(INTERCHANGE_NET_APP_DATE_SRC,1,4))
2.3.2)
Since the above conversion is such a common task I suggest that Service Pack 3 of SQL Server 2005 delivers the following functionality; -
STRINGTODATE ('YYYYMMDD',INTERCHANGE_NET_APP_DATE_SRC)
2.4) Select "database timestamp [DT_DBTIMESTAMP] " as Data Type.
2.5) Within the Mappings tab of the SQL Destination Editor have; -
Input Column as INTERCHANGE_NET_APP_DATE and
Destination Column as INTERCHANGE_NET_APP_DATE.
Please comment on the above, I will then pass on my suggestion to Microsoft.
Thanks in advance,
Kieran.
I asked this question below, but the answer was that the conversion will take place automatically, but I can't get that to happen. I have a flat file with an 8 position field that I identify as string (and I also tried date) that is yyyymmdd and it needs to go into the database field that is datetime format. IS there something I am doing wrong with the definition of it, or do I need to add some kind of conversion, and if so, what and how would that be done. I'm a dts Sql2000 expert, but the SSIS thing is driving me crazy. I have a ton of dts' to convert and the migration tool doesn't work because there are a lot of active X scripts in them. thanks for your help. Boston Rose
View 1 Replies View RelatedBrand new to this, so please bear with me.I'm using the following code fragment to update a datetime field on a SQL Server 2005 database table:cmd.CommandText = "Update Projects Set EntryDate = " & Convert.ToDateTime(txtEntryDate.Text)cmd.ExecuteNonQuery()The result of the update operation is the the database field contains the value "1900-01-01 00:00:00:000". This probably means that I passed nulls to SQL; however, I see a valid date in the txtEntryDate field on my web form (i.e., "06/18/2007"). I also did a "Response.write" to display the txtEntryDate and it looks Okay.Can someone tell me what I'm doing wrong?Thanks!Using Visual Web Developer 2005 Express.
View 1 Replies View RelatedMy requirement is to get the latest start date after a gap in a month for each id and if there is no gap for that particular id minimum date for that id should be taken….Given below the scenario
ID StartDate
1 2014-01-01
1 2014-02-01
1 2014-05-01-------After Gap Restarted
1 2014-06-01
1 2014-09-01---------After last gap restarted
1 2014-10-01
1 2014-11-01
2 2014-01-01
2 2014-02-01
2 2014-03-01
2 2014-04-01
2 2014-05-01
2 2014-06-01
2 2014-07-01
For Id 1 the start date after the latest gap is 2014-10-01 and for id=2 there is no gap so i need the minimum date 2014-01-01
My Expected Output
id Startdate
1 2014-10-01
2 2014-01-01
I want to display only the date part of a date field which contains both date & time information.
For example I have the value '2013-11-14 00:00:00.000' in my result set, and ideally I would like to show only '2013-11-14'.
I have looked up the datepart() command, however I can't work out how to return all parts of the date, rather than just the year, month, or day.
I have passed createdDate from UI to Stored procedure.createdDate field declared with DateTime.it is having value 2014-07-01.I need to fetch records from the database based upon the created field.but Create_TM in database having value Date with timestamp.so how would i change the createdfield in stored procedure.
ALTER PROCEDURE [dbo].[ByDateRange]
@Feed VARCHAR(50),
@CreatedDate DATETIME
select * from Date_table where Create_TM = @CreatedDate
I have a table named "shift" and I need to setup my query to return only data where the field "startime" = today. The problem I am running into is the starttime field it laid out like "2005-12-29 14:00:00" with different time values. I need to ruturn everything that has todays date regardless of the time value. I tried using GetDate() but that is returning data for other days as well or just data before or after the current time. Does anyone have any suggestions? This is driving me crazy! Thanks, Garrett
View 7 Replies View RelatedCan someone tell me sql query for filtering date field for current day,not last 24hours but from 00:00 to current time?
View 2 Replies View Related
Hi,
I need to insert into a column (lets say column x) a date based on the date on another column (lets say column y).
What I need is:
Take the day and month from column x (all records are formated yyyy-mm-dd)
Place it in column y
The yyyy in column y should be - currenct year +1 and no the year in column x.
All help welcome.
I want to compare two columns in the same table called start date and end date for one clientId.if clientId is having continuous refenceid and sartdate and enddate of reference that I don't need any caseopendate but if clientID has new reference id and it's start date is not continuous to its previous reference id then I need to set that start date as caseopendate.
I have table containing 5 columns.
caseid
referenceid
startdate
enddate
caseopendate
[code]...
I have a query to run a report where the results has a column named “Due Date” which holds a date value based on the project submission date.Now, I need to add 4 columns named, “45 Days Expectant”, “30 Days Overdue”, “60 Days Overdue” and “90 Days Overdue”.I need to do a calculation based on the “Due Date” and “System (I mean default computer date) Date” that if “System Date” is 45 days+ to “Due Date” than put “Yes” in “45 Days Expectant” row.
Also, if “Due Date” is less than or equal to system date by 30 days, put “Yes” in “30 Days Overdue” and same for the 60 and 90 days.how to write this Case Statement? I have some answers how to do it in SSRS (Report Designer) but I want to get the results using T-SQl.
We are using lookup transformation in SSIS 2012. The lookup transformation queries a table with two date columns. When we hover the mouse over the two columns in the 'columns' tab of the lookup transformation editor, the two columns show as DT_WSTR instead of DT_DBDATE. This causes the SSIS package to fail due to data type mismatch.A similar abandoned thread is available at: URL....
View 2 Replies View RelatedI want to be able to compare today's date with the date that is in the database. Right now I have:
Select Field1, Field2
FROM table 1
Where Year(TS_Date)=Year('3/1/2006')and Month(TS_Date)=Month('3/1/2006')
Where I have to change the date every month. Is there a way to use GetDate or another type of code so it could automatically update every month.
Any suggestions would be very greatful.
I am trying to convert a decimal date value to a date value that I can use in formulas but am having a lot of trouble.My date value currently shows in decimal format YYYYMMDD. I want to convert this to a date so I can then find the number of days between two dates.I have tried convert (datetime, convert(varchar(8),left(qhstdt,8))) with qhstdt as my decimal date field but I receive the error message below:
Error: SQL0204 - CONVERT in *LIBL type *N not found.
I have also tried converting it using (year(QHSTDT)*10000+100*month(QHSTDT)+ day(QHSTDT))) but when I convert the dates using this formula, I can get an incorrect number of days when I try to subtract one from the other.What formula can I use to convert my YYYYMMDD field to a format that will allow me to compare number of days between two dates?
Hello,
How do I get SQL server to insert the current date on inserting a record in a field of datetime?
Thanks
Grant
HiI am using SQL 2005, VB 2005I am trying to insert a record using parameters using the following code as per MotLey suggestion and it works finestring insertSQL; insertSQL = "INSERT INTO Issue(ProjectID, TypeofEntryID, PriorityID ,Title, Area) VALUES (@ProjectID, @TypeofEntryID, @PriorityID ,@Title, @Area)"; cmdInsert SqlCommand; cmdInsert=new SqlCommand(insertSQL,conn); cmdInsert.Parameters.Add("@ProjectID",SqlDbType.Varchar).Value=ProjectID.Text; My query is how to detail with dates my previous code wasinsertSQL += "convert(datetime,'" + DateTime.Now.ToString("dd/MM/yy") + "',3), '";I tried the code below but the record doesn't save?string date = DateTime.Now.ToString("dd/MM/yy"); insertSQL = "INSERT INTO WorkFlow(IssueID, TaskID, TaskDone, Date ,StaffID) VALUES (@IDIssue, @IDTask, @TaskDone, convert(DateTime,@Date,3),@IDStaff)"; cmdInsert.Parameters.Add("IDIssue", SqlDbType.Int).Value = IDIssue.ToString();cmdInsert.Parameters.Add("IDTask",SqlDbType.Int).Value = IDTask.Text;cmdInsert.Parameters.Add("TaskDone",SqlDbType.VarChar).Value = TaskDoneTxtbox.Text;cmdInsert.Parameters.Add("Date",SqlDbType.DateTime).Value = date;cmdInsert.Parameters.Add("IDStaff",SqlDbType.Int).Value = IDStaff.Text;Could someone point to me in the right direction?Thanks in advance
View 3 Replies View RelatedIn SQL 2005 if i was trying to insert some data with a text qualifier inside a text qualified field, it would work, for example:
"Name","ID ","Location","","Comany",""House Name" Road",
In SQL 2012, this fails with the error message, cannot find the text qualifer for field.
To get around this, we are having to import the data into a Dirty Data column of aTEMP table, ID, Dirty Data, Clean data - perform multiple updates and change the text qualifier and ensure they are only changed in the right places so we can keep the ". In this example, we changed the text qualifier to PIPES.
After these updates, we then export the data from CLEAN data back out to CSV, then reimport it into the origional destination table with a new text qualifer.
I need to pass in null/blank value in the date field or declare the field as string and convert date back to string.
I tried the 2nd option but I am having trouble converting the two digits of the recordset (rs_get_msp_info(2), 1, 2))) into a four digit yr. But it will only the yr in two digits.
The mfg_start_date is delcared as a string variable
mfg_start_date = CStr(CDate(Mid(rs_get_msp_info(2), 3, 2) & "/" & Mid(rs_get_msp_info(2), 5, 2) & "/" & Mid(rs_get_msp_info(2), 1, 2)))
option 1
I will have to declare the mfg_start_date as date but I need to send in a blank value for this variable in the stored procedure. It won't accept a null or blank value.
With refresh_shipping_sched
.ActiveConnection = CurrentProject.Connection
.CommandText = "spRefresh_shipping_sched"
.CommandType = adCmdStoredProc
.Parameters.Append .CreateParameter("ret_val", adInteger, adParamReturnValue)
.Parameters.Append .CreateParameter("@option", adInteger, adParamInput, 4, update_option)
.Parameters.Append .CreateParameter("@mfg_ord_num", adChar, adParamInput, mfg_ord_num_length, "")
.Parameters.Append .CreateParameter("@mfg_start_date", adChar, adParamInput, 10, "")
Set rs_refresh_shipping_sched = .Execute
End
Please help
I embedded a SQL query in excel that gets some datetime fields like "TASK_FINISH_DATE" .
How can I convert a datetime field to a date field in SQL in a way that excel will recognize it as a date type and not a text type?
I tried:
CONVERT(varchar(8),TASK_FINISH_DATE ,3)
CONVERT(Date,TASK_FINISH_DATE ,3)
CAST(TASK_FINISH_DATE as date)
**all of the above returned text objectes in excel and not date objects.
I am trying to drag data from Informix to Sql Server. When I kick off the package
using an OLE DB Source and a SQL Server Destination, I get DT_DBDATE to DT_DBTIMESTAMP
errors on two fields from Informix which are date data ....no timestamp part
I tried a couple of things:
Created a view of the Informix table where I cast the date fields as datetime year to fraction(5), which failed.
Altered the view to convert the date fields to char(10) with the hopes that SQL Server would implicitly cast them
as datetime but it failed.
What options do I have that will work?
Good morning...
I begin with SQL, I would like to add a field that will be date like 21/01/2000.
Actually i find just "datetime" format but give me the format 21/01/2000 01:01:20.
How to do for having date and time in two different field.
Sorry for my english....
Cordially
A newbie
Hi,
I need to convert a var char field to date field (DD/MM/YYYY)
Current convertion format:
CAST(Report_Date as DATETIME)
How can i convert to Date field with date format of DD/MM/YYYY?
Thanks.
Onn Onn
In SQL Server 2000:
How do I convert a Julian date to a Gregorian date?
How do I convert a Gregorian date to Julian?
Examples please.
Many thanks in advance.
Gary Andrews