SQL Server 2005 SP2 -- Error With ASP.Net Session State Using TempDB
Mar 14, 2007
I have an ASP.Net (C# 2.0) application that has been using SQL Server 2005 Standard Edition with Service Pack 1 to hold the session state in a testing environment. Currently, the session state is being stored in TempDB, rather than the ASPState database. This has worked very well for us until yesterday. We installed SQL Server 2005 Service Pack 2, as well as the Critical Update for Service Pack 2 (KB933508). Once the SQL server was rebooted, I got the following error message when I tried to access the web application.
The SELECT permission was denied on the object 'ASPStateTempApplications', database 'tempdb', schema 'dbo'.
The SELECT permission was denied on the object 'ASPStateTempApplications', database 'tempdb', schema 'dbo'.
The INSERT permission was denied on the object 'ASPStateTempApplications', database 'tempdb', schema 'dbo'.
In the web.config file for the application, I have a SQL username and password defined that can access the ASPState database. To correct this issue, I had to give this user db_datareader and db_datawriter access to tempDB.
Has anyone else run across this problem, and is it related to SQL Server 2005 Service Pack 2?
View 1 Replies
ADVERTISEMENT
Aug 3, 2006
The 2.0 version of ASPSTATE is slightly different than the 1.1 version in that one table has one additional column and another table uses a different data type and size for the key. The 2.0 version also has a couple additional stored procedures.
We'd like to manage just one session state database if possible so we're trying to figure out if Microsoft supports using the new schema for 1.1 session state access (it seems to work, but our testing has been very light).
Is there any official support line on this? If not, can anyone comment on whether or not you'd expect it to work and why?
Thanks.
View 1 Replies
View Related
Jun 22, 2006
I have SQL 2005 mmirroring sucessfully working in an ASP.NET 2.0 web application. I also have session state being maintained in SQL Server using the built-in functionality in ASP.NET. The problem is, even with "allowCustomSqlDatabase=True" and specifying a failover partner in the DSN, it appears that ASP.NET does not work with the failover partner. It always tries to get the session info from the "data source" server specified in the DSN.
Is there a way to get the session state to fail over to the mirrored server without writing a custom session state provider?
View 7 Replies
View Related
Jul 26, 2004
I am contemplating storing session state data in a SQL server database (created by running the installSqlState.sql script included in the .NET framework installation) and have established a functioning connection to the database but I am constantly getting "access denied". I've found that tweeking the permission settings in SQL for the ASP.NET user is resolving each specific error that arises but was wondering if there is a more "global" resolution? I'm finding myself having to manually check off each individual object and every option or is this what is needed to resolve the "access denied" error?
Thank you.
View 1 Replies
View Related
May 26, 2015
An old website I inherited uses sa to connect to SQL SessionState and had the details in the web.config. This is bad for security.The session state database is of -sstype "t" which is defined as:Temporary. Session state data is stored in the SQL Server tempdb database. Stored procedures for managing session state are installed in the SQL Server ASPState database. Data is not persisted if you restart SQL. This is the default.What kind of WIndows user, SQL Login, role and permissions do I need to create to make Session State secure? (Windows Server 2012 and SQL Server 2012 mixed mode authentication, Webfarm).
View 4 Replies
View Related
Jul 23, 2005
HiCan anyone help me with Session Management in ASP.NET. I have a webapplication with a login page and i need to retain the username afterhe logs in. This is what I have in Config FilesGlobal.asax<OBJECT RUNAT="SERVER" SCOPE="SESSION" ID="MyInfo"PROGID="Scripting.Dictionary"></OBJECT>web.config<configuration><!-- This section stores your SQL configuration as an appsettingcalledconn. You can name this setting anything you would like.--><appSettings><add key="conn"value="server=ADVAITH;database=tis;uid=sa;pwd=;" /></appSettings><!-- This section sets the authentication mode to formsauthenticationand routes all traffic to the specified page. It alsospecifies atimeout. The authorization section below denies all users notauthenticated. For testing purposes, custom errors was turnedoff.The section below allows pages to be trace enabled fordebugging--><system.web><sessionStatemode="InProc"cookieless="false"timeout="20" /><authentication mode="Forms"><forms name="MyFormsAuthentication" loginUrl="login.aspx"protection="All" timeout="720" /></authentication><authorization><deny users="?" /></authorization><customErrors mode="Off" /><trace enabled="true" requestLimit="0" pageOutput="true" /></system.web><system.web></system.web></configuration>When i assign the user name in the log in page it workssession("username") = txtUsername.TextBut if I use a new session variable or the username(session variable asdeclared in the login page, in the menu page it gives me error sayingthat Decralation is expected . Is there any files that i need to importb4 using sessions??Please help me out. My email:bramanujam@gmail.com
View 1 Replies
View Related
Jul 21, 2006
Hi,
We are experiencing intermittent authentication errors "Error: 18456, Severity: 14, State: 10" on a customer's production server. This is a new server that has just been rolled out in the past several months. Rebooting the server appears to make the problem go away. We are using SQL authentication from a separate server that is running IIS. The application always uses the same username and password to connect.
Server info:
select @@version
Microsoft SQL Server 2005 - 9.00.2047.00 (X64)
Apr 14 2006 01:11:53
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
select @@version
SP1
Sample error from SQL Server errorlog:
Date 7/7/2006 10:53:24 AM
Log SQL Server (Archive #2 - 7/7/2006 12:20:00 PM)
Source Logon
Message
Error: 18456, Severity: 14, State: 10.
MSDN (http://msdn2.microsoft.com/en-us/library/ms366351.aspx) lists various states for this error message but 10 is not included, and it says "Other error states exist and signify an unexpected internal processing error."
Note: This was not a case of a transient error that occurs only when SQL Server is starting up - these errors occurred at a variety of times, two months after the server was last rebooted / SQL Server last restarted.
Thanks for any help you can provide.
Regards,
-Frank.
View 26 Replies
View Related
Apr 17, 2007
I'm currently storing session state in a sql 2000 server for my vs.net 2002 projects. I'm currently developing a new project using vs.net 2005 and was wondering if I could store the session state in the same sql server. Does anyone know if this is possible? If so can someone point me in to an article or code example. All of the examples I have come across are for sqlExpress.
Thanks in advanceJason
View 1 Replies
View Related
Mar 31, 2008
Hi,
I need the application not to expire the session always. I need to maintain the session always even if the user keeps the web application idle for long time.
Regards,
Saravanan Gajendran
View 3 Replies
View Related
Jan 31, 2008
After adding the Witness Server to the Mirror session, the Witness Connection state between the Mirror and Witness Connection is Disconnected and the state between Principal and Witness Connection is Connected.
The procedures defined in Books Online was used to setup Database Mirroring...when the Witness server was added to the Mirror session, only the alter database T-SQL statement was executed on the Principal server.
ALTER DATABASE <db_name> SET WITNESS = 'TCP://<servername>:<port>'
After executing the above statement, a few seconds later the state between Principal and Witness Connection changed to Connected and the state between Mirror and Witness Connection remains Disconnected.
The Mirror session is not using Certificates, every server is on the same domain, using the same domain login account, and all servers have SP2 installed running Enterprise Edition.
Any idea's why the state between Mirror and Witness Connection remains Disconnected?
Thanks,
View 9 Replies
View Related
Feb 21, 2008
Hi all;
I want to implement "Auto disconnection" (or kill) of user session that exceed a specified idle duration in SQL Server 2005.
I know how do that in oracle by creating a profile and set the IDLE_TIME paramter and asign that profile to all users. But in SQL Server i don't know how to do it.
Can anyone help me.
Kindly
View 2 Replies
View Related
Nov 2, 2006
Hi,
Does anyone else have this error message pop up in SSMS when you try to parse sql statements:
.Net SqlClient Data Provider: Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
There was a thread back in March 2006 that mentioned this error, but the posted resolution was to install SP1. I have SP1 installed but I still get the error.
I only receive the error when I'm parsing statements, if I run the statement it's fine.
Thanks
Matt
View 8 Replies
View Related
May 12, 2007
Hello, I am pretty new with SQL Server 2005.
I have installed SQL Server Express Edition. I have migrated a set of tables from Oracl10g (by using Microsoft's Migration Tool Kit).While I am trying the following simple update command, the session hangs and it never finishes !!!!!!!!!!!!
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
select pos_key from pos_station where staff_key = 1105
POS_KEY
=======
NULL
update pos_station set pos_key = 1 where staff_key = 1105
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The table has a few constraints and a couple of indices in place.
Then I create another table (but no contraints or indices), just copy the data from the problematic one and the update WORKS (in msecs) :
update pos_station_new set pos_key = 1 where staff_key = 1105
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Is there any way to tell if the table (any table in SQL Server) is corrupted or not ?
How can I tell if a session is waiting for something and what is that something ?
Thank you very much for your help.
Tom
View 7 Replies
View Related
Mar 25, 2008
hello all
Since some days, i have this problem : i changed RTCcomponentService password, and now, when the SQL Server RTC service start (correctly, with network service), i have this log error message :
Login failed for user 'CGAUPARTCComponentService'. [CLIENT: <named pipe>]
ErrorReportingManager: Error raised, major=184, minor=56, severity=14, attempting to create sym
so, the service run with network (nt authority) correctly, but i have this error message.
I think that the sql server database connect with rtccomponentservice old password.
How I can change the password on this connection ? or what is de default password for RTCcomponentService ?
THanks
View 1 Replies
View Related
Dec 31, 2007
Hi,
Does any know how to increase a session timeout for Report Creation uing SQL Server 2005 Reporting Services. Iam trying to export a report (to a .pdf) using SQL 05 reporting services. However, it seems that the the query is timing out coz of session-time out. Can anyone tell me how to increase this value ?
Thanks
Nik
View 11 Replies
View Related
Oct 20, 2007
I am getteing
need help
Query analyzer error Unable to connect server local Msg17, level 16,state 1
ODBC SQL server driver [DBNETLIB]SQL server does not exist
View 6 Replies
View Related
Oct 19, 2007
This is on SQL Server 2005 for the sa account. I am just looking the in the sql server error log.I know this is a password mismatch. Where is it mismatched? Does there have to be a 'sa' network user account now with 2005?
Any help would be very appreciated.
Joanne Mahoney
View 18 Replies
View Related
Jun 19, 2007
I can't seem to connect to our local instance of Microsoft SQL Server. I obtained the followinf infrotmation from the error log and I can't find anything in regards to Severity 14 and state 1. If anyone has any information in regards to this it would be much appreciated. Thanks in advance!
===================================
Cannot connect to 10.1.0.191.
===================================
Login failed for user 'kbober'. (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
------------------------------
Server Name: 10.1.0.191
Error Number: 18456
Severity: 14
State: 1
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
View 29 Replies
View Related
Jul 6, 2007
Hi,
I have database with unlimited growth in Data with 2MB growth and Log File with 1MB growth. The continuous data is inserted with min 20KB per minute. We struct with following error and Log file size is too large (85GB) than Data file(20GB). Now server is not allowing to take backup as diskspace is not available.
Msg 9002, Level 17, State 2, Procedure DumpData, Line 10
The transaction log for database '%DB' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
status at SYS.DATABASES:
log_reuse_wait log_reuse_wait_desc
-------------- ------------------------------------------------------------
2 LOG_BACKUP
Please help me to resolved the issue and let me know hints to shrink LOG file. Data inserted are using ADO applications that uses some insert/select stored procedures that does not have begin transaction-Commit Transaction block as appliction issues the Commit over connection object.
Regards,
Pavan
View 7 Replies
View Related
Aug 13, 2006
Hi
I am new to SQL server and I have been trying hard to make a client computer to remote connect to a SQL express database on host computer
I have a VB6 application that can connect to SQL server database LOCALLY without problem:
Connection String is:
my_connection.ConnectionString = "Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=MyMushroom;Data Source=LAPTOPSQLEXPRESS"
I have followed instruction on enabling remote connection function from this blog:
http://blogs.msdn.com/sqlexpress/archive/2005/05/05/415084.aspx
I then try to run the same app from the client computer, it gives me:
Login failed for user 'LAPTOPGuest'.
After looking up the web for solution, I found that I can test the connection from the HOST computer in this way:
C:Documents and Settingskit>sqlcmd -E -S laptopsqlexpress
1>
2>
The test is successful
Now I run the same command on the CLIENT computer
C:Documents and SettingsKit>sqlcmd -E -S laptopsqlexpress
Msg 18456, Level 14, State 1, Server LAPTOPSQLEXPRESS, Line 1
Login failed for user 'LAPTOPGuest'.
Now I can sure that from the client computer it cannot make a connection to it, then I look at the errorLog from my host computer
2006-08-13 21:41:00.34 Logon Error: 18456, Severity: 14, State: 11.
2006-08-13 21:41:00.34 Logon Login failed for user 'LAPTOPGuest'. [CLIENT: 192.168.0.5]
2006-08-13 21:45:10.64 Logon Error: 18456, Severity: 14, State: 11.
2006-08-13 21:45:10.64 Logon Login failed for user 'LAPTOPGuest'. [CLIENT: 192.168.0.5]
2006-08-13 21:48:41.80 Logon Error: 18456, Severity: 14, State: 11.
2006-08-13 21:48:41.80 Logon Login failed for user 'LAPTOPGuest'. [CLIENT: 192.168.0.5]
Now I know it is actually Error: 18456, Severity: 14, State: 11.
From this site : http://blogs.msdn.com/sql_protocols/archive/2006/02/21/536201.aspx
11 and 12
Valid login but server access failure
It tells the connection string and SQL Express seem to be set up properly but the server access failed the remote connection
I have previously had SQL Server 2000 installed. I uninstalled SQL 2000 before I install SQL express but somehow the SQL Server Service Manager is still running at startup, and C:Program FilesMicrosoft SQL Server80 and its files are still exist after uninstallation..... Could this be a problem?
The Knowledge base suggestion on "enabling remote connection" is very simple and I do not understand why it is so difficult to me just to make a remote connection test work..... please, I need your help.
View 14 Replies
View Related
Jul 26, 2007
Recently, one of my clients began receiving this error. My team gave them sysadmin permissions, but this is terrible practice. I have read into disablying simple file sharing, but I don't even think I have the option to do it. I look in mycomputer > tools > view and don't see any option for this. Besides, the problem just started occuring recently, within the last week. The server is a cluster with veritas clustering and the edition is sql server 2000. Has anybody ever had a problem like this and have a good fix?
Thanks for any help in advance...
-Kyle
View 4 Replies
View Related
Mar 30, 2007
We have a problem with the creation a tempdb on SQL Server 2005 startup
We lost the Q: drive in which tempdb had a datafile
We can't attach a Q: drive because we are using a cluster
When we boot up, here what we get:
tempdb..sysfiles:
fid filename
1 I:Microsoft SQL ServerMSSQL.3MSSQLDATA empdb.mdf
2 I:Microsoft SQL ServerMSSQL.3MSSQLDATA emplog.ldf
master..sysaltfiles
fid filename
1 I:Microsoft SQL ServerMSSQL.3MSSQLDATA empdb.mdf
2 I:Microsoft SQL ServerMSSQL.3MSSQLDATA emplog.ldf
3 P:MSSQLData empdb1.ndf
4 R:MSSQLData empdb2.ndf
5 S:MSSQLData empdb3.ndf
6 T:MSSQLData empdb4.ndf
7 P:MSSQLData empdb_1.ndf
8 P:MSSQLData empdb_11.ndf
9 P:MSSQLData mp1.ndf
10 R:MSSQLData mp2.ndf
11 P:MSSQLData emp1.ndf
12 Q:MSSQLData emp2.ndf
13 R:MSSQLData emp3.ndf
14 S:MSSQLData emp4.ndf
15 S:MSSQLData mp3.ndf
16 T:MSSQLData mp4.ndf
17 P:MSSQLData mp_1.ndf
18 R:MSSQLData mp_2.ndf
19 S:MSSQLData mp_3.ndf
20 T:MSSQLData mp_4.ndf
We've tried to use the 'allow update' option but it won't work. I can't remove lines from sysaltfiles.
We need tempdb to use 4 other devices for performance but it won't remember it's definition because it failed each time. Here the log entry:
CREATE FILE encountered operating system error 21(The device is not ready.) while attempting to open or create the physical file 'Q:MSSQLData emp2.ndf'.
Now I found information on how to resolve this on 2000:
http://groups.google.ca/group/microsoft.public.sqlserver.server/browse_thread/thread/eb365f82650d78d1/7c30472ae0a11448%237c30472ae0a11448
By using a trace flag but I don't see how I can use this on 2005 ! Can someone help me ?
View 3 Replies
View Related
May 12, 2006
I have written a stored procedure that calls a C# class. The sp is called by a trigger on table A. The class has 2 methods. Method 1 is the main call from the stored procedure. Inside it, it sets a connection to the db. Then it calls another private method which has it's own connection and returns a dataset so that I can close that connection by the end of the method. When I execute the sp from within sql management studio, it runs just fine. But when being called from the trigger, I get the "transaction context in use by another session error" error. I read that I needed to wrap my 2nd connection in ...
using (new TransactionScope(TransactionScopeOption.Suppress)){ open conn here, do work, etc.}
I've tried that and I still get the same error from the trigger. Anyone know what else I can try? Thanks.
View 9 Replies
View Related
Mar 20, 2008
When i am connecting Report Manager report through our ASP.NET 2.0 application using Report Viewer control frequently we get message ASP.Net Session expired .
How can we avoid this error.While i directly opens Reports through the Report Manager reports are opening without any problem.
My .Net application Code.
ReportViewer1.ServerReport.ReportServerUrl = new Uri("http://SERVER/reportserver");
ReportViewer1.ServerReport.ReportPath = @"/myreport/reportname";
View 12 Replies
View Related
Oct 30, 2006
I am programming in ASP and SQL server.
I am using this tag <%Transaction=Required%> to do the transaction.
And it woks well, but the problem is that sometimes I get this error: "transaction context in use by another session"...
It's really weird because it only happens in the same row. If choose this row to be shown I get that message, but if choose another row I get result with no error. And if take out the tag <%Transaction... I don't get any error.
I've searched in other forums about this error, and one guy claims that there is a bug in the MTS and there is no way to solve the problem.
View 2 Replies
View Related
Jan 23, 2007
Hi,
I have three publications on a dev server. All are sql 2005 merge replication (push) with replication running to subscribers on the same instance of sql server (note this is just dev testing).
However, I have just marked one for re-initialisation / create new snapshot / don't upload changes but when I kick off the synchronisation it says it has insufficient permission to run the snapshot.
When I do this for the other two there is no problem.
SQLAgent is running (using LocalSystem) so I don't know why my reinitialisation won't work.
Any help would be greatly appreciated.
View 1 Replies
View Related
Oct 30, 2006
I am runnning a package which loads 3 million records, if my package fails after loading 1 million records, How do I execute my package in order to load the records from 1 million record? My guess is checkpoints will not help in this case. Do we have any other option to recover the session?
View 5 Replies
View Related
May 12, 2006
I have a c# stored procedure that is being called from a trigger. When I execute it from management studio, it works just fine. But, when I update a record in the table that has the trigger that calls the sp, I get the error "transaction context in use by another session error". I've tried a few of the "fixes" that I found through searching, but so far nothing seems to work. What I've tried so far is...
Removing the transaction from my code
making sure my code is only using 1 connection
setting XACT_ABORT ON
Any other ideas? Thanks.
View 1 Replies
View Related
May 28, 2007
hi guys , does anyone of you have a good solution on the Error 1413: Communications to the remote server instance failed before database mirroring was fully started issue?
Best Regards,
Hans
View 1 Replies
View Related
Dec 25, 2006
I downloaded a copy of sql server and when I run the following query in the sql management studio after choosing new query , DMX I get the above error
CREATE MINING MODEL [NBSample]
(
CustomerKey LONG KEY,
Gender TEXT DISCRETE,
[Number Cars Owned] LONG DISCRETE,
[Bike Buyer] LONG DISCRETE PREDICT
)
Using Microsoft_Naive_Bayes
Also in the pane Mining Model I get the message No mining models found. The only error I get when I installed SQL server was a COM plus registration error. I am running Windows XP SP2. Can someone please help.
Vijay Mukhi
HOD Helios
View 1 Replies
View Related
Jul 13, 2006
Our SQL Server 200 box is getting perflib errors when we get a decentamount of people using an application that I wrote, call queue system,web based. To accomplish a queue type system on a button push I wrotea query like this...BEGIN TRANSACTION;Select top 1...fields here...FROM table with (xlock,readpast)(2 joins)WHERE numerous where clausesORDER BY 2 order bys.Now our sql server starts timing out..then in the app log this showsup....Error: 1203, Severity: 20, State: 1Process ID 62 attempting to unlock unowned resource PAG: 6:1:126407.For more information, see Help and Support Center athttp://go.microsoft.com/fwlink/events.asp.The reason I am doing xlock is to make a record not viewable to 2people if they click the button on the web form that runs the abovequery within the same minute, they would get different records....So to avoid this error which I assume is due to my xlock should Irethink my query?
View 3 Replies
View Related
Nov 13, 2014
I have one drop and create procedure script in one sql session and execute the procedure in other session. Now when i am compiling the procedure in first session, it gets completed successfully.
Now when i move to other session and try to execute the procedure, it gives me error saying :
"Invalid column name 'ColumnName'."
Now when I execute the procedure in same session in which procedure was compiled, it runs successfully. Once run, I go back to my other session and it runs again.
View 9 Replies
View Related
Apr 13, 2006
Hello,
We are running SQL2K5 and have a Web server with a family of sites all sharing an identical connection string to enable ADO connection pooling between them. Today for about 20 minutes we had several (all?) connections from one site that uses a specific DB get a connection reuse error which showed in out SQL logs:
DESCRIPTION: The client was unable to reuse a session with SPID #, which had been reset for conection pooling. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this error message.
We also have SQL Server slowdown and log in problems from other applications that seemed a symptom of this, or some third unknown cause. Note, the # means the run-time spid number was inserted. The misspelling "conection" comes right out of sys.messages (it is not our custom error):
select top 10 * from sys.messages where message_id = 18056
The immediately preceeding error in the SQL Log was always:
Message
Error: 18056, Severity: 20, State: 29.
Where Severity and State vary, but "Error: 18056" is consistent, although I can find no documentation on "Error: 18056" through Google or MSDN.
Also, the "The client was unable to reuse a session ..." error seems not to be referred to anywhere.
In our IIS logs, the matching entries are of the form:
[DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.
and
Invalid connection string attribute
My questions: Does anyone have experience with this error? We have real good history with ADO connection pooling, but can a "bad" connection be pooled, and if so can it be "flushed" or the pool "drained"?
Thank you for anything you have to offer!
View 13 Replies
View Related
