I'm currently storing session state in a sql 2000 server for my vs.net 2002 projects. I'm currently developing a new project using vs.net 2005 and was wondering if I could store the session state in the same sql server. Does anyone know if this is possible? If so can someone point me in to an article or code example. All of the examples I have come across are for sqlExpress.
Thanks in advance
Jason
The 2.0 version of ASPSTATE is slightly different than the 1.1 version in that one table has one additional column and another table uses a different data type and size for the key. The 2.0 version also has a couple additional stored procedures.
We'd like to manage just one session state database if possible so we're trying to figure out if Microsoft supports using the new schema for 1.1 session state access (it seems to work, but our testing has been very light).
Is there any official support line on this? If not, can anyone comment on whether or not you'd expect it to work and why?
Thanks.
HiCan anyone help me with Session Management in ASP.NET. I have a webapplication with a login page and i need to retain the username afterhe logs in. This is what I have in Config FilesGlobal.asax<OBJECT RUNAT="SERVER" SCOPE="SESSION" ID="MyInfo"PROGID="Scripting.Dictionary"></OBJECT>web.config<configuration><!-- This section stores your SQL configuration as an appsettingcalledconn. You can name this setting anything you would like.--><appSettings><add key="conn"value="server=ADVAITH;database=tis;uid=sa;pwd=;" /></appSettings><!-- This section sets the authentication mode to formsauthenticationand routes all traffic to the specified page. It alsospecifies atimeout. The authorization section below denies all users notauthenticated. For testing purposes, custom errors was turnedoff.The section below allows pages to be trace enabled fordebugging--><system.web><sessionStatemode="InProc"cookieless="false"timeout="20" /><authentication mode="Forms"><forms name="MyFormsAuthentication" loginUrl="login.aspx"protection="All" timeout="720" /></authentication><authorization><deny users="?" /></authorization><customErrors mode="Off" /><trace enabled="true" requestLimit="0" pageOutput="true" /></system.web><system.web></system.web></configuration>When i assign the user name in the log in page it workssession("username") = txtUsername.TextBut if I use a new session variable or the username(session variable asdeclared in the login page, in the menu page it gives me error sayingthat Decralation is expected . Is there any files that i need to importb4 using sessions??Please help me out. My email:bramanujam@gmail.com
View 1 Replies View RelatedI have SQL 2005 mmirroring sucessfully working in an ASP.NET 2.0 web application. I also have session state being maintained in SQL Server using the built-in functionality in ASP.NET. The problem is, even with "allowCustomSqlDatabase=True" and specifying a failover partner in the DSN, it appears that ASP.NET does not work with the failover partner. It always tries to get the session info from the "data source" server specified in the DSN.
Is there a way to get the session state to fail over to the mirrored server without writing a custom session state provider?
I have an ASP.Net (C# 2.0) application that has been using SQL Server 2005 Standard Edition with Service Pack 1 to hold the session state in a testing environment. Currently, the session state is being stored in TempDB, rather than the ASPState database. This has worked very well for us until yesterday. We installed SQL Server 2005 Service Pack 2, as well as the Critical Update for Service Pack 2 (KB933508). Once the SQL server was rebooted, I got the following error message when I tried to access the web application.
The SELECT permission was denied on the object 'ASPStateTempApplications', database 'tempdb', schema 'dbo'.The SELECT permission was denied on the object 'ASPStateTempApplications', database 'tempdb', schema 'dbo'.The INSERT permission was denied on the object 'ASPStateTempApplications', database 'tempdb', schema 'dbo'.
In the web.config file for the application, I have a SQL username and password defined that can access the ASPState database. To correct this issue, I had to give this user db_datareader and db_datawriter access to tempDB.
Has anyone else run across this problem, and is it related to SQL Server 2005 Service Pack 2?
I am contemplating storing session state data in a SQL server database (created by running the installSqlState.sql script included in the .NET framework installation) and have established a functioning connection to the database but I am constantly getting "access denied". I've found that tweeking the permission settings in SQL for the ASP.NET user is resolving each specific error that arises but was wondering if there is a more "global" resolution? I'm finding myself having to manually check off each individual object and every option or is this what is needed to resolve the "access denied" error?
Thank you.
Hi,
I need the application not to expire the session always. I need to maintain the session always even if the user keeps the web application idle for long time.
Regards,
Saravanan Gajendran
An old website I inherited uses sa to connect to SQL SessionState and had the details in the web.config. This is bad for security.The session state database is of -sstype "t" which is defined as:Temporary. Session state data is stored in the SQL Server tempdb database. Stored procedures for managing session state are installed in the SQL Server ASPState database. Data is not persisted if you restart SQL. This is the default.What kind of WIndows user, SQL Login, role and permissions do I need to create to make Session State secure? (Windows Server 2012 and SQL Server 2012 mixed mode authentication, Webfarm).
View 4 Replies View RelatedI'm sure this is a very simple piece of code, but I'm having trouble understanding how to do this.
First I have a database with three columns
ContactID
Hello Everyone,
Please stick with me for a second...
If someone dealt with tables related to US State/County and ZIP.
We found a company on the Web which have ALL US counties, states, zips and cities in one big table.
We need somehow to break this table( about 76K records) into multiple related tables and estabsish Some sort of relationship among these tables.
1.State table(design)
ID
State_Name
2.County table( design)
ID
County_Name
Relationship_to_State
For example if state = 'NY'; then all Counties falls in NY should have relationship '01'. For NJ '02' and so on.
3.Zipcode table( design-same as for county)
If someone has any idea how to solve this problem that would be really appreciated.
Thanks a lot in advance.
After adding the Witness Server to the Mirror session, the Witness Connection state between the Mirror and Witness Connection is Disconnected and the state between Principal and Witness Connection is Connected.
The procedures defined in Books Online was used to setup Database Mirroring...when the Witness server was added to the Mirror session, only the alter database T-SQL statement was executed on the Principal server.
ALTER DATABASE <db_name> SET WITNESS = 'TCP://<servername>:<port>'
After executing the above statement, a few seconds later the state between Principal and Witness Connection changed to Connected and the state between Mirror and Witness Connection remains Disconnected.
The Mirror session is not using Certificates, every server is on the same domain, using the same domain login account, and all servers have SP2 installed running Enterprise Edition.
Any idea's why the state between Mirror and Witness Connection remains Disconnected?
Thanks,
How do I configure the SQLServerAgent 2000 mail session? Do I need MS Outlook installed on the server?
View 1 Replies View RelatedHi,
I want to create a text file and write to text it by calling its assembly from Stored Procedure. Full Detail is given below
I write a code in class to create a text file and write text in it.
1) I creat a class in Visual Basic.Net 2005, whose code is given below:
Imports System
Imports System.IO
Imports Microsoft.VisualBasic
Imports System.Diagnostics
Public Class WLog
Public Shared Sub LogToTextFile(ByVal LogName As String, ByVal newMessage As String)
Dim w As StreamWriter = File.AppendText(LogName)
LogIt(newMessage, w)
w.Close()
End Sub
Public Shared Sub LogIt(ByVal logMessage As String, ByVal wr As StreamWriter)
wr.Write(ControlChars.CrLf & "Log Entry:")
wr.WriteLine("(0) {1}", DateTime.Now.ToLongTimeString(), DateTime.Now.ToLongDateString())
wr.WriteLine(" :")
wr.WriteLine(" :{0}", logMessage)
wr.WriteLine("---------------------------")
wr.Flush()
End Sub
Public Shared Sub LotToEventLog(ByVal errorMessage As String)
Dim log As System.Diagnostics.EventLog = New System.Diagnostics.EventLog
log.Source = "My Application"
log.WriteEntry(errorMessage)
End Sub
End Class
2) Make & register its assembly, in SQL Server 2005.
3)Create Stored Procedure as given below:
CREATE PROCEDURE dbo.SP_LogTextFile
(
@LogName nvarchar(255), @NewMessage nvarchar(255)
)
AS EXTERNAL NAME
[asmLog].[WriteLog.WLog].[LogToTextFile]
4) When i execute this stored procedure as
Execute SP_LogTextFile 'C:Test.txt','Message1'
5) Then i got the following error
Msg 6522, Level 16, State 1, Procedure SP_LogTextFile, Line 0
A .NET Framework error occurred during execution of user defined routine or aggregate 'SP_LogTextFile':
System.UnauthorizedAccessException: Access to the path 'C:Test.txt' is denied.
System.UnauthorizedAccessException:
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, ileOptions options)
at System.IO.StreamWriter.CreateFile(String path, Boolean append)
at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize)
at System.IO.StreamWriter..ctor(String path, Boolean append)
at System.IO.File.AppendText(String path)
at WriteLog.WLog.LogToTextFile(String LogName, String newMessage)
Hi,
I've my database, testdb, ended up in Suspect state. The SQL log shows " I/O error 38(Reached the end of the file.) detected during read at offset xxxxxxxxxx in file '<path> estdb_Data.MDF'" during recovery. I do not have backup to restore the database from. So to run DBCC CHECKDB, I tried to put the database in emergency(bypass recovery) mode using
update sysdatabases set status = 32768 where name = 'testdb'
DBCC CHECKDB showed some allocation and consistency errors and suggested "repair_allow_data_loss" as minimum repair level.
Now to run
DBCC CHECKDB('testdb', repair_allow_data_loss)
I've to put database in SINGLE USER mode. For that I started SQL server by command
sqlservr.exe -c -m
Now when I try to run DBCC CHECKDB with repair option it says "Attempt to BEGIN TRANSACTION in database 'testdb' failed because database is in BYPASS RECOVERY mode."
So it seems I need to change the status of database such that it will allow me to repair it. If I try to reset the status, the database again goes in Suspect state and it seems DBCC commands don't run on database in Suspect state. Does anybody know how to recover the database in this state? Is there any other way to repair it?
Thanks in advance,
Yojana
Hello, without going into the politics of why I'm asking, does anyone have a compiled list of functionality that only sysadmin's could do in 2000 that VIEW SERVER STATE permission opens up in 2005?
From the documentation, so far I've found fn_get_sql (and it's dm view) but I'd really like a complete list.
When I try to modify a table that I just created I get the following error message: - Unable to modify table ODBC error:[Mircrosoft][ODBC SQL Server Driver] Invalid cursor state.
SP3 has been applied to SQL Server 2000.
Can anyone help explain what is causing this error? There is sufficient space for the database and transaction log.
I have a problem where my connection always has an open transaction as viewed by activity monitor.
I am using the latest MS SQL Server 2005 JDBC driver (1.1) and connecting to SQL Server 2000.
This issue arises only when selectMethod=cursor and autoCommit is set to false. This issue does not exist when I connect to SQL Server 2005.
Has anyone else seen this issue?
How can this issue be resolved?
Thanks
Peter
Is it possible to store an email in SQL server 2000? Do we need to define our own data type for that, if yes then how? or do we have to store it as an object, again how? I want to save email after sending it by my ASP .NET application and then retrieve it at a later stage.......Anyone please help?
View 2 Replies View Relatedhi guys, are there any official or some sort of documents to talk about the advantages and disadvantages of storing image in the SQL's Image datatype field or storing the pointer to the image file? i have lots of static images (no more than 1MB each) that requires little updating and i need to retrieve them constantly. i am really struggled here on which method i should store the images: to store the images as Image datatype in SQL or save them as files and store the paths to the files. i would like to know, in my case, would there be any performance and efficient difference on using either method?
naturally, i'd think the 1st method seems like a better solution. it's easier to back up and it protects integrity. But at the same time, i am not sure if the constant inserting and retrieving of images will affect the performance? also, i want to share the images and may create a ticker thing (using JavaScript) to display the images on the web page randomly and it seems like the 2nd method is easier to program. if you were me, which method would you use and why? thanks!
How can we store native .NET objects like arraylists, hashtables in Sql Server? Is this possible? If so, can anybody provide some insight on how to do this?
Thanks
hi..
i am taking date and time from user as input in different screen.
some times i need only date to be stored and some time only time.
as we have data type datetime in MS SQL Server 2000, it takes both date and time in one field.
so how to take only date or only time from user and store in database.
HI,ALL:
I'm new to store procedure in sql 2000,now I create a sp to generate Balance report data ,
but when I run my sp in sql 2000 Query analyzer,I can get the data and some of data is null.
Now I want to replace null with '0' in my sp result data, is it possible to do it in store procedure in design model. ?
how to get the soluation ?
thanks a lot!
I am trying to call DB2 stroe procedure from within SQL server 2000 using DTS. I have the IBM odbc driver installed on the server. I have created an ACtiveX script to run in DTS and it fails staing it could not findor load the DB2 store procedure.
Has anyone come across doing this and how they did it?
THanks for the help....
I just want to store pic.bmp file in server using image datatype but don't getting how to do that ..
i want to know about both the actions storing and retrieving from the image data type..
like
create table amit
(
im image,
);
insert into values ()...
select * form Amit will it work...
I'm using MS SQL Server Management Studio. How do copy my store procedures that are on the SQL Server 2000 to SQL Server 2005? What are my options? I don't have admin rights...only rights to my database.
View 6 Replies View RelatedAs an 'SA' I thought that you have permission to do anything on the server. Running an update command from Query Analyzer is throwing this error:
SQL Server 2000 SP3
Server: Msg 18456, Level 14, State 1, Line 1
Login failed for user 'sa'.
The table is in the dbo schema.
Has anyone seen this error before?
I have a stored procedure that takes 18 hours to complete. SometimesI get the below error message when I run the stored procedure.'Server : Msg 9002, Level 17, State 6, Line 1 The log file fordatabase 'Customer' is full. Back up the transaction log for thedatabase to free up some log space.'.I checked my log file and it is not full. And I don't know why I amgetting this message. Any help is appreciated.Thanks,Anjula
View 2 Replies View RelatedHi
How to store flash files into the sql server 2000 database and again display them back in asp.net/C# user interface?thanks
Hi All, i want to store the word document files as xml files in the sql server 2000 . then i have to retrive the XML Files in to aspx pages. the document files size are 5 mb , 6 mb like that . plz give the solution that how to do it .Thanks in Advance . Regards ,raja
View 2 Replies View Relatedhi..
I want to store a RMVB file to SQL SERVER 2000 ,and read from it,iwant to play the RMVB file in web,the size of the RMVB file is more than 300MB less 1G.the SQL Field Image can include it.
Now My Quesstion is How can i Store and Read the RMVB file from SQL Server2000?
I used SqlInsertCommand.ExecuteNoquery() in my program,but it Too slow,ao make a unknown error.
Thank you for your help.
Our SQL Server 200 box is getting perflib errors when we get a decentamount of people using an application that I wrote, call queue system,web based. To accomplish a queue type system on a button push I wrotea query like this...BEGIN TRANSACTION;Select top 1...fields here...FROM table with (xlock,readpast)(2 joins)WHERE numerous where clausesORDER BY 2 order bys.Now our sql server starts timing out..then in the app log this showsup....Error: 1203, Severity: 20, State: 1Process ID 62 attempting to unlock unowned resource PAG: 6:1:126407.For more information, see Help and Support Center athttp://go.microsoft.com/fwlink/events.asp.The reason I am doing xlock is to make a record not viewable to 2people if they click the button on the web form that runs the abovequery within the same minute, they would get different records....So to avoid this error which I assume is due to my xlock should Irethink my query?
View 3 Replies View Relatedhi friends
i want to know how to calculate year ranging from 1900 to 2000 using store procedure in sql server
We have mirroring setup for 5 dbs, 4 of which are synchronized and 1 which is in "synchronizing" state on the principal and "restoring" state on the mirror. Mirroring for all dbs has been working fine for the past several months and we have a witness that has allowed automatic failover in the past without problems.
This database has several bulk inserts performed throughout the day and am sure there is some latency due to the size of these transactions.
Not sure as to why this is happening all of a sudden, but the db in question has been in this state for the past 12 hrs. I checked the mirroring status on the principal and it states that it is "synchronizing: data is being transferred from principal to mirror", but the mirror server states that db is in "restoring" state. Can anyone suggest as to how I can get the database on the mirroring server to get back to "mirror, synchronizing/restoring..." state? Or suggest on how I can troubleshoot this?
Thanks in advance.