Designing a solution for loading data into SQL destination from a single 5/10 GB flat file? If yes, what kind of performance measures you have taken while designing the solution ?
View 3 Replies
Iam trying to load a RR Flat File(Ragged Right) into SQL Server DB Destination.
The file feeds the data into two tables and the logic looks like this..
If Position 30 = ''
Record Set goes into Table 1
Else
Record Set goes into Table 2
I have no clue where to start with my limited SSIS Exposure.. Any Ideas as to what i shud be starting with (Transformations)??
Thanks in Advance.
I writing the data from sql table to flat file destination. I want to insert the record count in the first line of the destination file.
Record count must preceed 00.EX . Writing 4500 records from database should show 004500 in the first line of flat file.
I have an execute task to store the count in a variable now.
It seems I can do the type conversion in two place:
1. The advanced editor for flat file source => Input and output roperties. And I can set the output columns data type properties there.
2. Using a Data conversion box in Data flow transformation.
Any difference between these two? Which one should be used?
I want to use DTS to load from a flat file. But I can't be sure whenthe flat file will arrive. I would like the job to check every 10minutes or so for a couple of hours. If the file is present, then loadthe file and rename it so that it doesn't get overwritten. Anysuggestions?TIA,amorphous999
View 3 Replies View RelatedI have multiple xml data file in a directory say C:XMLData abc1.xml, abc2.xml, abc3.xml etc.
Need to loop through each file in ssis with Foreach loop container, and get the file name say abc1, and load the data of abc1.xml to abc1 table in sql server DB.
Next iteration will pick up the abc2.xml and find the abc2 table in sql server DB then insert the data in abc2 table.
While each iteration, xml source should also point each xsd file correspondingly.
 Tables are already created in DB
I solved my problem up to getting the file name from ech iteration and assigned file name to variable, in oledb destination data access mode I select Table or view name variable, then corresponding table will get selected for data insertation.
Just wanted to know how can I read each xsd file for each xml data files while iteration.Â
While loading the flat file into sql server2005 using SSIS , i am getting error like:
[Source - 20070801PensionPayments_dat [1]] Error: The "output column "Status" (246)" failed because truncation occurred, and the truncation
row disposition on "output column "Status" (246)" specifies failure on truncation. A truncation error occurred on the specified object of
the specified component.
In the EM import wizard, i can see last column [][](blank space similar box type). because of that i unable to load data into table. The delimiter is fixed width.
Please help me - Thanks in Advance.
When you load the data into a new partition table, can it to done online without any downtime? because I have few tables that are around 250 gigs and more.
View 5 Replies View RelatedI have number of csv files in a folder, all of them with same columns, need to be merged into one table and imported to sql server.
-The first row of the csv file is a header.
-The csv files are updated everyday
-The destination table is replace by new table with new info in the csv.
-The new csv files can be created and old csv files may no longer exist, but we are only interested in information contain in current csv files in the folder.
-I need SSIS to combine all the csv files in the folder and merge into one table.
-Other issue is that the field names may change in csv, so can the SSIS package recognize the change in field name and made necessary change in destination table as well.
Any insight on this issues will be greatly appreciated?
Here's what I want to do -
Dynamically load a flat file from a dynamic source table-
The source table metadata is known via the SYSOBJECTS and SYSCOLUMNS tables- I can pull the column names, type and lengths from these tables based on the table name. (my goal is pretty simple- pull data from a table in our database, and save it down to a flat file)
Would this be enough to dynamically create the destination flat file? If so, how do I do it?
Thanks
-rob
I have a text file that loads just fine with DTS 2000, but in SSIS it does not seems to recognize the row delimiter. For example, most rows in the text file have 10 columns, but some have 8 columns. For those with 8 columns, the SSIS is adding the data from next row, not padding the columns with nulls. Please help...
Thanks in advance.
I tried to load a fixed width flat file with around 300,000 rows. However, only the first 8xxxx rows were loaded to the destineation table and the rest row were loading blank records. There was no error message showing during package execution. I've tried to split the file in half and the result was the same. So it wasn't the data file problem.
Would there be any buffering issue I need to cater for inside the package? Thanks!
Can we bulk insert only the desired column from a flat file to a table?
I am using SSIS to bulk insert from a file with more than 200 columns. I am trying to find a way I can bulk insert them to multiples table through SSIS.
The one way I can think is pre map the columns from the file to the destination tables. Build numerous Bulk Insert tasks to achieve that. But not sure if SSIS will let me do that.
I'm in the process of importing a series of flat files into SQL Server. I'm using a ~ to separate the columns and the row delimiter is {CR}{LF}. One of the files has a field that contains the CRLF combination in a few places so that field is split over several rows. This is readily visible when I look at the flat file. However, when I'm importing the file, the Import and Export wizard seems to ignore them and import the files as they should with one row per record.
View 0 Replies View RelatedI have the misfortune of converting a DTS package to SSIS that loads a flat file that has a text fields that can contain embedded text delimiters ("), column delimiters (,) and even new lines (CR+LF i.e.,hex 0D 0A) in it. A sample line from the file is posted here, remember this is just one line though it shows as three lines, since the third field has embedded new line in it:
4,"Sam","EVP; MARKETING PRODUCT MANAGER ""Level I"",
Internet Sales / HELP
8005551212",100
If you open in excel it handles it perfectly showing four fields, as below, and this is what I want ( I cannot get it aligned right in the posting, just save the above line in *.csv and open to see what it should be):
4 Sam "EVP; MARKETING PRODUCT MANAGER ""Level I"", 100
Internet Sales / HELP
8005551212"
Now, SSIS errors on the embedded text delimiters and breaks into two or three lines based on which option I chose. I have tried few options based on postings in the forum:
a). Using undouble and undoubleout: Does not work when there are embedded column delimiters (,) in the text field
b). Modified undouble script posted by lvovg at http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1718225&SiteID=1. Handles the embedded column delimiters (,) perfectly, but the embedded new lines (CR+LF i.e.,hex 0D 0A) are breaking it.
Since, I am using the ragged right format to read from the file then use transform script on the line by lvovg, the line is already broken by the ragged right format at the embedded new lines, hence does not work.
Right now I am stuck. Can someone please help (anyone from MS) ? I am already baffled at the amount of coding required to convert a very basic ( and working ) flat file load DTS package to SSIS. I am willing to persist bit longer to convert this to SSIS, before I give up and stick with DTS and wait for a fix / workaround.
Thanks.
Hey Everyone,
I have a Data-Flow task embedded in a Sequence Container (does not fail component on error) on the Control Flow panel of the SSIS designer. This data flow task contains a connection to a Flat File Source -> A Data Transformation -> Into an OLE Db Destination.
The problem is that the Flat File isn't always delimited properly -> the client cannot be relied on to do this.
My question is when the delimiters are messed up, how can I capture the offending error row(s) from the Flat File Source?
What I've tried:
1) Set every column in the source flat file on error to: Redirect Row
2) Added a Script Transformation to pull the description and the record id out of the offending row
3) Added an Error file flat file destination to the end of the flow.
The package always fails on the Flat File Source and never Redirects the offending Row to the error output - I never see my onError Script Transformation go Green, Red, or Yellow - SSIS doesn't let it get there.
I'm really new to SSIS so sorry if this is a super basic question.
Here is the Error Text:
[Source - InventTable_csv [1]] Error: The column delimiter for column "RECID" was not found.
[Source - InventTable_csv [1]] Error: An error occurred while processing file "C:------InventTable.csv" on data row 15228.
[DTS.Pipeline] Error: The PrimeOutput method on component "Source - InventTable_csv" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
I do have the MaxErrorCount set to 1 on the Data Flow Task but still think I should see my script task execute and a log entry be generated.
Any Ideas?
Matt
I am so new to SQL Server 2005 and just studying. Saying that...
We use SQL Server 2005 Express edition. Some one sent me a file (info.mdb) and asked me to load the data in this file in to a table called Products and also asked me to load in another table (ProdCat) where id = 'X05'.
So being not knowing anyting regarding data loading etc, how should I do this and proceed? The .mdb means its a Access database file? If that is the case, I dont have Access in my machine and what should I do?
I am looking for a way to convert the following format into a sql table. The format it is Bib Tex.
Essentially a new row in the table would be for each entry, denoted by an @ logo and each column is denoted by an =, as you can see from the example data no one contains all the possible columns and some fields can be over two lines long.
To load this I was considering loading it into a table as each line being a row. Adding a row number, then a column counting the @ signs in order and essentially grouping each record, then for each group running through and looking for the column keywords 'author' , 'title' etc then splitting the data out into those constituent parts using substring and charindex.
@Book{hicks2001,
author = "von Hicks, III, Michael",
title = "Design of a Carbon Fiber Composite Grid Structure for the GLAST
Spacecraft Using a Novel Manufacturing Technique",
publisher = "Stanford Press",
year = 2001,
[Code] ....
Hi,
I am interested in writing a stored procedure that will compute and select data from SQL Server 2000 database and store it into a .XLS or flat file.
how can i do that ?
need help.
Thanks.
-- Parag
one of my database data file is 100 GB and the log file is 500 GB.DB is in full recovery model and the transaction logs happen once in 6 hours.Even then, the Database log file isn't reducing in size.
View 9 Replies View RelatedI have a table dbo.Sales that contains all sales records. There is a column in that table called ItemNumber that I'd like to match with ItemNumber in a flat file and update the ItemCost based on the ItemCost column in the flat file.
So while there will be many sales records for each ItemNumber, I need to loop through and update the ItemCost in that sales record based on the corresponding ItemCost in the flat file. Does this make sense? I really need this for court and I can't figure out how to do it. I took a SQL course about 7 years ago but have forgotten everything.
Database Name: BTData
Database Table: dbo.Sales
Database Columns: ItemNumber (match on this), ItemCost (update this)
FlatFile Name: InventoryCosts.txt
FlatFile Columns: ItemNumber, ItemCost
There will be many sales records for each ItemNumber in the database table. I need to update each one with correct cost based on the item number and cost mapping from flat file.
I have some duplicate records in my flat file. But i don't want to load those duplicate rows into my destination.
View 2 Replies View RelatedI'm working on SSIS to load the data from flat file to sql server, I'm getting date in below format, but in sql server I have given data type datetime. how to convert below format to 16-01-15 12.05.19.1234 AM.
View 4 Replies View RelatedI am trying to look into a query thats taking 5 mins to execute on our production. Its an LinQ generated 6000 Line SQL query that the dev team is trying to put into production without any testing. They want me to add indexes to the database( brand new) so that the query will run fast. The execution plan really looks weird. So Just as a starter I tried to tune it using the DTA and I am getting the below error. I am using a .sql query file as the input.
The minimum storage space required for the selected physical design structures exceeds the default storage space selected by Database Engine Tuning Advisor. Either keep fewer physical design structures, or increase the default storage space to be larger than at least 441 MB.Use one of the following methods to increase storage space: (1) If you are using the graphical user interface, enter the required value for Define max. space for recommendations (MB) in the Advanced Options of the Tuning Options tabbed page; (2) If you are using dta.exe, specify the maximum space value for the -B argument; (3) If you are using an XML input file, specify the maximum space value for the <StorageBoundInMB> element under <Tuning Options>
My question is what value is the maximum value that I should consider adding per recommendation (2) in the above error.
I am unable to load data from flat file to sql table using bulk insert sql statement
My code:-
DECLARE @filePath VARCHAR(200)
DECLARE @sql VARCHAR(8000)
Declare @filename varchar(100)
set @filename='CCNVZ_150401054418'
SET @filePath = 'I:IncomingFiles'+@FileName+'.txt'
[Code] .....
Hi,
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
Did someone else faced this issue?
Thanks,
AQ
Hello!! searching information about how to migrate some date from an old data base (any tipe) from SQL I´v found this:
LOAD DATA [LOW_PRIORITY | CONCURRENT] [LOCAL] INFILE 'file_name.txt'
[REPLACE | IGNORE]
INTO TABLE tbl_name
[FIELDS
[TERMINATED BY 'string']
[[OPTIONALLY] ENCLOSED BY 'char']
[ESCAPED BY 'char' ]
]
[LINES
[STARTING BY 'string']
[TERMINATED BY 'string']
]
[IGNORE number LINES]
[(col_name_or_user_var,...)]
[SET col_name = expr,...)]
Does anybody know how does it works and how to use it????I´d like to know because I have to load data from a text file to a SQL Data Base and this seems to be te fastest an easiest way to do it...Thanks!!!!bye!
How do u achieve this -- While SSIS Data Load Execution itself?
Update Col B with Col A value if Col B is NULL in the Data File?
I want to create a XML file with data in my table. I have a question about tags.
SELECT
-- Root element attributes
'http://tempuri.org/Form.xsd' AS 'xmlns',
'http://www.w3.org/2001/XMLSchema-instance' AS 'xmlns:xsd',
(
SELECT
-- Creating a default element
[Code] ....
This is my query. When I use 'xmlns' namespace the result is below:
<Form xmlns="http://tempuri.org/Form.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema-instance">
<Veri xmlns="">
<Satir>
<Id>1</Id>
</Satir>
</Veri>
</Form>
I dont want to see 'xmlns' in 'Veri' tag. When I use xmlna or another word instead of 'xmlns' the result is below:
<Form xmlns="http://tempuri.org/Form.xsd" xmlna:xsd="http://www.w3.org/2001/XMLSchema-instance">
<Veri>
<Satir>
<Id>1</Id>
</Satir>
</Veri>
</Form>
How can I remove 'xmlns' from 'Veri' tag while using it in 'Form' tag
Hi all,
In a foreachloop, I am inserting records into a flat file which is working fine. But the thing is that as the file grows, it takes longer for it to locate the EOF(End of File) of the flat file so as to insert the records.
I have around 70-100 lines written to the file at each loop and there are more than 20k records to be looped. wihich means that at the end I should be having 1400k - 20000k line in the text file.
One solution would be to insert the records at the start of the file itself so that it does not has to lookup the EOF each time before writting.
Another would be to generate separate files and then merge it.
Any idea how can this can be done?
Beside this I have to zip the file and then SFTP to a given address.
Any suggestion or help would be welcome.
Rdgs
David
Hi,
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
Any inputs will be appreciated.
M.Shah
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me  error " cannot open data file" ...
Nothing is wrong with package.