I have a string and i want to get only the numbers from right.
For example if I have the string Like '123756zxfggr123456' then it will show me only 123456 or if i have the string like
'4vbz67xfggr123dfd' then it will show me only 123 or if i have the string like '123756zxfgg43r5' then it will show me only 5.
I got a function where it gives me all the numbers in a string but I don't need that
CREATE FUNCTION dbo.udf_GetNumeric
(@strAlphaNumeric VARCHAR(256))
RETURNS VARCHAR(256)
AS
BEGIN
DECLARE @intAlpha INT
[Code] ....
If I ran the select statement it gives me the result 111123456 but i want only 123456 or if i select
SELECT dbo.udf_GetNumeric('111zxfggr6587fhhfkwee') AS 'Num' it will show me 6587.
One of my varchar columns in a table has multiple key words enclosed in a pattern of special characters.
Eg: William Shakespeare was an English [##poet##], [##playwright##], and [##actor##], widely regarded as the greatest [##writer##] in the English language and the world's pre-eminent [##dramatist##]. He is often called England's national [##poet##] and the "Bard of Avon". His extant works, including some collaborations, consist of about 38 plays, 154 [##sonnets##], two long narrative [##poems##], and a few other [##verses##], of which the authorship of some is uncertain. His plays have been translated into every major living language and are performed more often than those of any other [##playwright##].
I need to write to query to find all distinct key words that are enclosed within [## and ##]. My query should yield the following results from the string in the example above
[##actor##] [##dramatist##] [##playwright##] -- 2 occurrances, but I need it only once in my result set [##poems##] [##poet##] -- 2 occurrances, but I need it only once in my result set [##sonnets##] [##verses##] [##writer##]
I need to run this on a large table, so I am looking for the best possible way to minimize any performance issues.
Just give you sample code, I have provided below 2 separate snippets, one with table variable and another with temp table.
DECLARE @MyTable TABLE (MyString VARCHAR (8000)) INSERT @MyTable VALUES ('William Shakespeare was an English [##poet##], [##playwright##], and [##actor##], widely regarded as the greatest [##writer##] in the English language and the world''s pre-eminent [##dramatist##]. He is often called England''s national [##poet##] and the "Bard of Avon". His extant works, including some collaborations, consist of about 38 plays, 154 [##sonnets##], two long narrative [##poems##], and a few other [##verses##], of which the authorship of some is uncertain.
I'm trying to find a specific string (a name) and replace it with another inside of a VARCHAR(7000) field. Unfortunately, there are names like Ted and Ken that I'm trying to replace. I would like to leave words like Broken, admitted, etc... intact.
UPDATEtbl SETBody = LEFT(REPLACE(tbl.Body, pm.OldFirstName, p.FirstName), 7000) FROM Table tbl JOIN Person p ON p.PersonID = tbl.PersonID JOIN PersonMap pm ON pm.PersonID = p.PersonID AND LEN(pm.OldFirstName) > 2 WHEREtbl.Body LIKE '%[^a-z]'+pm.OldFirstName+'[., ]%
'The problem I'm running into is that the '[, ]%' in the LIKE excludes any record that ends with the FirstName because it is requiring either a space, comma or period after the name. Is there some way to add an empty string to the list of acceptable characters as that would cover any scenario in the data? I would prefer not to add all characters except space, comma and period, but I guess I could do that.
I have a separate list of calendar years with radiocarbon year equivalents in SQL server but no conversion equation. Most but not all of the data I have is in radiocarbon years. I thought at first I could just link the tables but I don't want the data that is already in calendar years to be linked to this conversion table. Is there any way I can either link the two tables with criteria for which data is linked (Only ages that are in radiocarbon years). Or possibly a way to query all ages that are in radiocarbon years and do something similar to a find and replace with a large list of numbers to change?
I have following query which return me SP/Views and Functions script using:
select DEFINITION FROM .SYS.SQL_MODULESNow, the result looks like Create proc create procedure create proc create view create function
I need its result as:
Alter Procedure Alter Procedure Alter Procedure Alter View Alter Function
I used following
select replace(replace(replace(DEFINITION,'CREATE PROCEDURE','Alter Procedure'), 'create proc','Alter Procedure'),'create view','Alter View') FROM .SYS.SQL_MODULESto but it is checking fixed space like create<space>proc, how can i check if there are two or more spaces in between create view or create proc or create function, it should replace as i want?
Given a Table1 with two columns 'Name' with some N rows of data and another Table2 with one column 'SeqNo' with N rows, each of which contains a unique integer which can be ordered monotonically, I want to do an INSERT into some Table3 with two columns 'Name' and 'SeqNo' such that each INSERT'd row gets one of the unique integers.
How can I reference Table2 so that Table2.SeqNo will 'line up' properly? Note that the ordering of the SeqNo values isn't mandatory as long as each SeqNo is assigned to one and only one row.
On edit: Table2 isn't required, it's just the way I started thinking about it. It would be nicer to just have two integer vars, @StartSeqNo = 6000978 and @EndSeqNo = 6000981 for he example above. Either way is fine.
I have a Contact table where I enter a "Parent" (Mother or Father) with IsSubscriber = 1. I also enter all of their children in this same table, with IsDependent = 1.
I then have a Relationship table that relates each child to the appropriate parent record in the Contact table.
I need to assign a sequence number to each child ONLY if they were a multiple birth (twins, triplets, etc.; all have the same DOB). I've been successful at writing a query using ROW_NUMBER(), but it includes the single births (no other child of the same parent has the same DOB).
Stripped down version of Tables and Data and my failed attempt to write a query to do what I want:
IF OBJECT_ID('TempDB..#Contact','U') IS NOT NULL DROP TABLE #Contact CREATE TABLE #Contact ( ContactId INT IDENTITY(1,1) PRIMARY KEY CLUSTERED , IsSubscriber BIT
I am importing an excel spreadsheet into a MS SQL database table. When the spreadsheet is finished importing, I am noticing that some values that were brought in resemble something like this 1.41666666666667. Other values may be shorter or only have 1 digit. The problem is another web application that pulls this data for use in online forms only allows up to 2 digits. How can I round all of the numbers like the above to 2 decimals and replace the existing values?
I know there is the rounding function that could be used like so:
SELECT ROUND ([Hrs Total 2],2) FROM AnnualClassifiedPAFs
How do I then take that rounded value and insert it back into the records?
We have some URLs within a bulk block of text some of which are very long. I need to identify rows where such urls exceed say 100 characters in length in amongst other text.So the rule would be return a record if within the string there is a string (without spaces) longer than 100 characters.
Say you have a table that has records with numbers sort of like lottery winning numbers, say:
TableWinners num1, num2, num3, num4, num5, num6 33 52 47 23 17 28 ... more records with similar structure.
Then you have another table with chosen numbers, same structure as above, TableGuesses.
How could you do the following comparisons between TableGuesses and TableWinners:
1. Compare a single record in TableGuesses to a single record in TableWinners to get a count of the number of numbers that match (kind of a typical lottery type of thing).
2. Compare a single record in TableGuessess to ALL records in TableWinners to see which record in TableWinners is the closest match to the selected record in TableGuesses.
My team is starting to implement error handling in our sprocs. One question we have is whether or not to use unique error numbers for custom errors (ie Errors we throw after doing some sort of validity check, not SQL Server errors). For example, we might check the value of a parameter and then throw an error that says "Parameter State_Date must be less than today, please retry".
We are using SQL Server 2012 and will be using the THROW statement, not RAISERROR, so we don't HAVE to put the numbers in sys.messages. Also, we are going to log the errors in a table, along with the error message, sproc name, line number, etc.
Is it useful to maintain a custom list of error numbers and messages? Or is it just as useful to use one standard error number and add a custom error message (which we can then search for in our code, or use the sproc name & line number we logged)? And if it is worth maintaining a list of numbers plus messages, should we go ahead and put them in sys.messages?
In this case I would like to output a single result for each order, but based on stock availability order 123 is not a complete order and 124 is so the results will need to reflect this.
I have a database that is pre-populated with sequential part numbers.As people reserve the parts I update a flag to show the # is no longeravailable. Now they want the ability to take out a block of "x"number of sequential part numbers - say for example 5.If my database had the following numbers available:101104105110111112113114It should return 110 thru 114 and then I would write an update queryto change the flags to 1 (checked out).I have only been able to return the first "x" number of records - havenot been able to make sure they are stepped sequentially - with thefollowing:SELECT ID_ITEM From PARTNO_CHKOUT_SPECIAL M Where (Select Count(*)FROM PARTNO_CHKOUT_SPECIAL NWHERE N.ID_ITEM <= M.ID_ITEM) >= 0 AND TYPE_REC=1 ANDFLAG_CHECKED_OUT=0 {maxrows 5}The above would return 101, 104, 105, 110, 111I tried using an (N.ID_ITEM+1)-M.ID_ITEM=0 to try stepping and geterrors, probably incorrect syntax. Can I do this in an SQL statement?
A table I'm working with has a varchar column containing a comma-delimited string of numbers, which match up to smallint codes in another table. I gather this is someone's implementation of a many-to-many relationship. :)
Using SQL Server 2008 and wondering if there's a special trick to using a string list of numbers with IN() URL...converting the string into a temp table[/url] but I'd just like to make sure there isn't a quicker, easier approach, or if that's it.
Say I have a string of Numbers eg. "1,2,3,4,5" and in order to split it I use split("1,2,3,4,5", ",") function, what would I get as an answer? My second question is, if I want to pass all 5 numbers in a sub report as if I am selecting from a multi-value parameter, how would I do that? I have tried several different ways of doing it and I still can't get it to work. Please help me...and feel free to email me back if somethign is not clear.
I have a SELECT statement, the result of which populates a datagrid. The first column has consecutive dates in it and I want to hyperlink each date to a seperate Javascript function (the Javascript is created on the fly and is unique for each date). I need a different function name for each function and so tried the date but "/" is not allowed in the Javasript function name. I think the easiest way will be to produce a new column with the date expresses ddmmyyyy, ddmmyy or some such unique number (but not dd/mm/yyyy). I tried :-
"CASE " & _ "WHEN t3.date = t3.date THEN (DAY(t3.Date) + MONTH(t3.Date) + YEAR(t3.Date)) ELSE NULL END AS [javaKey]
but this adds the year to the month to the day - not a unique result as 1/2/06 and 2/1/06 are the same.
I am just getting to grips with VB.Net (as an amature) but am a distinct beginner at SQL!
I have a column in a table which looks like below.
Column ------- AA123 D123 AXC1 QF23
I need to split this value into two part, Alphabets and numeric. How to do this using SQL query.My column value will not have mixed characters like A1D3,G32S,12F.It will always follow the ablve pattern mentioned above.
I've got a string of numbers, say 123456 (the actually number is 12 digitslong). I need to calculate the sum of each individual number in the stringof numbers, so in the example of 123456 the sum would be 21 (1+2+3+4+5+6).Thanks
Yeah, it's pretty simple. Maybe it'll help someone out.
-- USAGE: fn_extract_chars(string_to_search, 'letters' -or- 'numbers') CREATE FUNCTION fn_extract_chars (@x varchar(128), @y char(7)) RETURNS varchar(128) AS BEGIN DECLARE @chars varchar(128) DECLARE @pos int DECLARE @action varchar(32) SET @pos = 0 SET @chars = ''
IF @y = 'numbers' SET @action = '[0-9]' ELSE IF @y = 'letters' SET @action = '[a-zA-Z]'
WHILE @pos < (DATALENGTH(@x) + 1) BEGIN IF PATINDEX(@action,SUBSTRING(@x, @pos, 1)) > 0 BEGIN SET @chars = @chars + (SELECT SUBSTRING(@x, @pos, 1)) END SET @pos = @pos + 1 END RETURN(@chars) END
Hello, I'm having problems with a column of numeric string data coming from a tab delimited CSV file. When a number in the column is negative, it is expressed this way; 1,240.52-
The negative symbol occurs at the end of the numeric string. The destination column is in a SQL Server 2005 table. I've tried to change the data type of the table column, and three or four different data types in a data conversion task, but nothing has worked so far to bring the data over.
I want to send an email two ice a day, from database. So I have planned to make a storedproce which will be called by a job (which will select some record from one table and put it in other table based on a flag) but I want to run it in a transaction so that if email is send successfully then only it should commit else it should rollback.
How can i find that "Mail queued" now i should commit.
