For the above string, which string function can be used to find the number of occurences of a particular character, for example, ','? For this example, the answer should be 4. Is there any built-in function in SQL to do this?
Create table DBInfo (Path varchar (500)) Insert into DBInfo values('/Data Sources') Insert into DBInfo values('/Data Sources/SALES') Insert into DBInfo values('/PRODUCTION') Insert into DBInfo values('/PRODUCTION/SERVICE') Insert into DBInfo values('/PRODUCTION/SERVICE/MAINTENANCE') Insert into DBInfo values('/PRODUCTION/SERVICE/LOGISTICS')
My Expected Output
Column1,Column2,Column3 Data SourcesNullNull Data SourcesSalesNull PRODUCTIONNullNull PRODUCTIONSERVICENull PRODUCTIONSERVICEMAINTENANCE PRODUCTIONSERVICELOGISTICS
I have a problem where I want to write a function to remove recurring characters from a string and replace them with a single same character.
For instance I have the string '12333345566689' and the result should be '12345689'. In Oracle I could do this with "regexp_replace('12333345566689', '(.)1+', '1')", but in T-SQL the only solution I could think of is something like this:
DECLARE @code NVARCHAR(255) SET @code = '12333345566689'; SET @code = REPLACE(REPLACE(REPLACE(@Code, '1', '~1'), '1~', ''), '~1', '1');
and repeat this for 2 - 9. But I'm sure there is a more elegant version for this in SQL Server 2012.
I have a string and i want to get only the numbers from right.
For example if I have the string Like '123756zxfggr123456' then it will show me only 123456 or if i have the string like '4vbz67xfggr123dfd' then it will show me only 123 or if i have the string like '123756zxfgg43r5' then it will show me only 5.
I got a function where it gives me all the numbers in a string but I don't need that
CREATE FUNCTION dbo.udf_GetNumeric (@strAlphaNumeric VARCHAR(256)) RETURNS VARCHAR(256) AS BEGIN DECLARE @intAlpha INT
[Code] ....
If I ran the select statement it gives me the result 111123456 but i want only 123456 or if i select
SELECT dbo.udf_GetNumeric('111zxfggr6587fhhfkwee') AS 'Num' it will show me 6587.
I'm new to SQL and I've been trying this for a while now.
I have let's say a loop of numbers from one to ten. It appears like this:
1 2 3 4 5
What I want to do is to have it appear on one column like this: 12345, the problem is I can't seem to figure out if I need to only have one variable or I'm missing something else, I figured you need to convert them into a string character but I'm still unable to do it.
add a number to the end of an ID to create a series.For example, I have an EventID that may have many sub events. If the EventID is 31206, and I want to have subEvents, I would like have the following sequence. In this case, lets say I have 4 sub Events so I want to check the EventID and then produce:
312061 312062 312063 312064
How can I check what the EventID is, then concatenate a sequence number by the EventID?
One of my varchar columns in a table has multiple key words enclosed in a pattern of special characters.
Eg: William Shakespeare was an English [##poet##], [##playwright##], and [##actor##], widely regarded as the greatest [##writer##] in the English language and the world's pre-eminent [##dramatist##]. He is often called England's national [##poet##] and the "Bard of Avon". His extant works, including some collaborations, consist of about 38 plays, 154 [##sonnets##], two long narrative [##poems##], and a few other [##verses##], of which the authorship of some is uncertain. His plays have been translated into every major living language and are performed more often than those of any other [##playwright##].
I need to write to query to find all distinct key words that are enclosed within [## and ##]. My query should yield the following results from the string in the example above
[##actor##] [##dramatist##] [##playwright##] -- 2 occurrances, but I need it only once in my result set [##poems##] [##poet##] -- 2 occurrances, but I need it only once in my result set [##sonnets##] [##verses##] [##writer##]
I need to run this on a large table, so I am looking for the best possible way to minimize any performance issues.
Just give you sample code, I have provided below 2 separate snippets, one with table variable and another with temp table.
DECLARE @MyTable TABLE (MyString VARCHAR (8000)) INSERT @MyTable VALUES ('William Shakespeare was an English [##poet##], [##playwright##], and [##actor##], widely regarded as the greatest [##writer##] in the English language and the world''s pre-eminent [##dramatist##]. He is often called England''s national [##poet##] and the "Bard of Avon". His extant works, including some collaborations, consist of about 38 plays, 154 [##sonnets##], two long narrative [##poems##], and a few other [##verses##], of which the authorship of some is uncertain.
I'm trying to find a specific string (a name) and replace it with another inside of a VARCHAR(7000) field. Unfortunately, there are names like Ted and Ken that I'm trying to replace. I would like to leave words like Broken, admitted, etc... intact.
UPDATEtbl SETBody = LEFT(REPLACE(tbl.Body, pm.OldFirstName, p.FirstName), 7000) FROM Table tbl JOIN Person p ON p.PersonID = tbl.PersonID JOIN PersonMap pm ON pm.PersonID = p.PersonID AND LEN(pm.OldFirstName) > 2 WHEREtbl.Body LIKE '%[^a-z]'+pm.OldFirstName+'[., ]%
'The problem I'm running into is that the '[, ]%' in the LIKE excludes any record that ends with the FirstName because it is requiring either a space, comma or period after the name. Is there some way to add an empty string to the list of acceptable characters as that would cover any scenario in the data? I would prefer not to add all characters except space, comma and period, but I guess I could do that.
I have a text field which has entries of variable length of the form:
"house:app.apx&resultid=1234,clientip" or "tost:app.apx&resultid=123,clientip" or "airplane:app.apx&resultid=123489,clientip"
I'm trying to pick out the numbers between resultid='...',clientip no matter what the rest of the string looks like. So in this example it would be the numbers:
1234 123 12389
the part of the string of the form resultid='...',clientip always stays the same except the length of the number can vary.
I'm trying to quantify the number of times folks use SQL Server Management Studio to change client data in one of our production databases. Does SQL Server keep this statistic? How do I get to this data?
I have following query which return me SP/Views and Functions script using:
select DEFINITION FROM .SYS.SQL_MODULESNow, the result looks like Create proc create procedure create proc create view create function
I need its result as:
Alter Procedure Alter Procedure Alter Procedure Alter View Alter Function
I used following
select replace(replace(replace(DEFINITION,'CREATE PROCEDURE','Alter Procedure'), 'create proc','Alter Procedure'),'create view','Alter View') FROM .SYS.SQL_MODULESto but it is checking fixed space like create<space>proc, how can i check if there are two or more spaces in between create view or create proc or create function, it should replace as i want?
I have a request where i would like to get the start date/time and end date/time and flag (with an int) which hours (24 hour clock) have values between the two dates. Example car comes into service on 2013-12-25 at 0800 and leaves 2013-12-25 at 1400 the difference is 6 hours and i need my table to show
As i'm working away at it i'm trying to figure out how i could use a Time Dimension table for this but dont really see much. So far i have the difference between the two times in hours (hour_diff) and the start hour (min_hour) so i would like to do something where i update the first hour (min_hour) and update columns based on the numbers of hours (hour_diff)
I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
Now for the complicated part, a person can take absence(sick,holiday,other) for any part of a day or whole day(s). For these absence periods only the worked time on that day needs to be negated off, not the whole period of time.
So for example
If this person
had a days holiday on the 22nd, shown in the HOLIDAY table as
The 'Leave of Absence' on the 20th had no effect on the total for the day as it was between planned work times. how to do this within T-SQL, as simple as possible as I've got to had this code over to other staff members to maintain, who have not had much SQL experience yet?
I've tried doing it as a temp table, with dual insert/select commands, splitting the times over midnight, which partially worked but missed some of the combinations.
I am trying to figure out how I can find the names of people who have a double occurrence or more of characters either in their first name or last name.
I am trying to insert a row into a table of Microsoft SQL Server 2000.
There are various columns.
[SNO] [numeric](3, 0) NOT NULL , [DATT] [char] (32) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [DATTA] [char] (3000) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [CODECS] [char] (32) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
The [DATTA] column is causing a problem. Even if I am trying to put only 1700 character string into [DATTA], the java code throws the following exception:-
StaleConnecti A CONM7007I: Mapping the following SQLException, with ErrorCode 0 and SQLState 08S01, to a StaleConnectionException: java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Connection reset
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
Why is it throwing an exception even though the sum-total of this row doesn't exceed 8000 characters?
create table data_set (id int primary key, col1 varchar(10)) go insert into data_set values (1,'a'), (2,'b'),(3,'c'),(4,'d'),(5,'a'),(6,'b'),(7,'e'),(8,'f'),(9,'a'),(10,'a') select * from data_set
I tried this below
Declare @child_ids int @col_val varchar @count int
select @child_ids, @col_val, @count, count(col1) as records from data_set group by col1 order by col1
I am getting a tab character at the end of my query fields, been trying various things to fix, such as using the replace function below but still i get the tabs!
select CAST(REPLACE(NAMEALIAS,CHAR(9),'')AS CHAR(40)) + ',' as PRODNAME, CAST(REPLACE(ISNULL(GLOBALTRADEITEMNUMBER,0),CHAR(9),'')AS CHAR(18))as EANNO,LTRIM(cast(ISNULL(GLOBALTRADEITEMNUMBER,0) as char(18))) as KONSEAN ,LTRIM(CAST(I.ITEMID AS CHAR(8))) AS PRODCODE,'00' from INVENTTABLE I LEFT JOIN INVENTITEMGROUPITEM IG ON I.ITEMID = IG.ITEMID
We have some URLs within a bulk block of text some of which are very long. I need to identify rows where such urls exceed say 100 characters in length in amongst other text.So the rule would be return a record if within the string there is a string (without spaces) longer than 100 characters.
I need to write a SQL to find number of hours between a begin time and end time. The fields are varchar. There are several date functions in sql, but I am not able to figure out how to get the hours between two times that is not in date format.
Is there a way to get the number of occurances of a word within a specific row?
I want to query a dataset and have a column act as the number of occurances of a word within that row. I also need to use Full-Text searching... Is this possible?