SQL Server 2012 :: MERGE Statement Attempted To UPDATE Or DELETE Same Row More Than Once
Mar 12, 2015
I have created a Dynamic Merge statement SCD2 Store procedure , which insert the records if no matches and if bbxkey matches from source table to destination table thne it updates old record as lateteverion 0 and insert new record with latest version 1.
I am getting below error when I ahve more than 1 bbxkey in my source table. How can I ignore this.
BBXkey is nothing but I am deriving by combining 2 columns.
Msg 8672, Level 16, State 1, Line 6
The MERGE statement attempted to UPDATE or DELETE the same row more than once. This happens when a target row matches more than one source row. A MERGE statement cannot UPDATE/DELETE the same row of the target table multiple times. Refine the ON clause to ensure a target row matches at most one source row, or use the GROUP BY clause to group the source rows.
View 4 Replies
ADVERTISEMENT
Jul 25, 2015
I have a four tables called plandescription, plandetail and analysisdetail. The table plandescription has the columns DetailQuestionID which is the primary and identity column and a QuestionDescription column.
The table plandetail consists of the column PlanDetailID which the primary and identity column, DetailQuestionID which is the foreign key attribute of plandescription table and a planID column.
The third table analysisdetail consists of a analysisID which the primary and identity column, PlanDetailID which is the foreign key attribute of plandetail table and a scenario.
Below is the schema of the three tables
I have a two web form that will insert, update and delete data into these three tables in a two transaction. One web form will perform CRUD operations in plandescription and plandetail table. When the user inserts QuestionDescription and planid in this web form, I will insert the QuestionDescription Value in the plandescription table and will generate a DetailQuestionID value and this value is fed to the plandetail table with the planid. Here I will generate a PlanDetailID.
Once this transaction is done, I will show the second web form in which the user enters the scenario and this will be mapped with the plandescription using the PlanDetailID.
This schema cannot be changes as this is the client requirement. When I insert values I don’t have any problem. However when I update existing data, I need to delete existing PlanDetailID in the plandetail table and recreate PlanDetailID data for that DetailQuestionID and planID. This is because, the user will be adding or deleting a planID associated with the QuestionDescription.
Once I recreate PlanDetailID for that DetailQuestionID and planID, I need to update the old PlanDetailID with the new PlanDetailID in the third table analysisdetail for the associated analysisID.
I created a #Temp table called #DetailTable to insert the values analysisID, planid and old PlanDetailID and new PlanDetailID so that I can have them in update statement once I delete the data from plandetail table for that PlanDetailID.
Then I deleted the plandetailid from the plandetail table and recreate PlanDetailID for that DetailQuestionID. During my recreation I fetched the new PlanDetailID’s created into another temp table called #InsertedRows
After this I am running a while loop to update the temp table #DetailTable with the newly created PlanDetailID for the appropriate planID’s. The problem is here. When I have the same number of planID’s for example 2 planID’s 1,2 I will have only two old PlanDetailID and new PlanDetailID for that planID and analysisID.But When I add a new PlanID or remove a existing planID I am getting null value for that newly added or deleted planID. This is affecting my update statement of analysisdetail table as PlanDetailID cannot be null.
I tried to remove the Null value from the #DetailTable by running the update statement of analysis detail in a while loop however its not working.
DECLARE @categoryid INT = 8
DECLARE @DetailQuestionID INT = 1380
/*------- I need the query to run for the below three data.
Here i'm updating my planids that already exists in my database*/
DECLARE @planids VARCHAR(MAX) = '2,4,5'
[code].....
View 2 Replies
View Related
Mar 18, 2015
I have created mergse statement using SCD2.where I am inserting the data if my BBxkey is not matching with target and updating the rows if the bbxkey is matching and rowchecksum is different.
Working of Store procedure
There are 2 scenario covered in this procedure on the basis of that ETL happening.
There are 2 columns deriving from source table at run time, one is BBxkey which is nothing but a combination of one or more column or part of column and another column is a Rowchecksum column which is nothing but a Hashvalue of all the column of the tables for a row.
Merge case 1:-WHEN NOT MATCH THEN INSERT
If source BBxkey is not there in Archive table that means if BBxKey is null then those records are new and it will directly inserted into Archive table.
Merge case 2:-WHEN MATCH THEN UPDATE
If Source.BBxkey=Target.BBxkey && Source.Rowchecksum<>Target.Rowchecksum then this means source records are available in Archive table but data has been changed, in this case it will update the old record with latestversion 0 and insert the new record with latestversion 1.
my sp failing when source having more than 1 same bbxkey.
error [Execute SQL Task] Error: Executing the query "EXEC dbo.ETL_STAGE_ARCHIVE ?" failed with the following error: "The MERGE statement attempted to UPDATE or DELETE the same row more than once. This happens when a target row matches more than one source row. A MERGE statement cannot UPDATE/DELETE the same row of the target table multiple times. Refine the ON clause to ensure a target row matches at most one source row, or use the GROUP BY clause to group the source rows.".
Sample store procedure
DECLARE @Merge_Out TABLE (Action_Taken varchar(8),
TimeIn datetime,
BBXKey varchar(100),
RowChecksum nvarchar(4000),Col001 varchar(8000),Col002 varchar(8000),
Col003 varchar(8000),Col004 varchar(8000),Col005 varchar(8000),
[code].....
How Can I avoid such failure of my sp.
I want to handle those case where S.bbxkey=T.bbxkey && s.rowchecksum=t.rowchecksum
View 2 Replies
View Related
Oct 7, 2015
In a t-sql 2012 merge statement that is listed below, the insert statement on the merge statement listed below is not working. The update statement works though.
Merge test.dbo.LockCombination AS LKC1
USING
(select LKC.lockID,LKC.seq,A.lockCombo1,A.schoolnumber
from
[Inputtb] A
JOIN test.dbo.School SCH ON A.schoolnumber = SCH.type
[Code] ....
Thus would you tell me what I need to do to make the insert statement work on the merge statement listed above?
View 6 Replies
View Related
Feb 13, 2015
I am working on to convert my static Store procedure to Dynamic.
I have created a Store procedure with Merge statement which is inserting new record and updating existing record.
This SP I will use in SSIS Insted of Data Flow Task I will run in Execute SQL Task.
Now my biggest problem is I dont know how to convert static code toi dynamic
Below is my Store procedure code.
As you can see my Source Query
I have a filemaster table as shown below which consist of Input filename,Source table ,Destination table and BBX expression.
Input_FilenameSourceTableName DestinationTableName BBxKeyDerExpr
CCTFB ImportBBxCctfb ArchiveBBxCctfb SUBSTRING(Col001,1,6)
CEMXR ImportBBxCemxr ArchiveBBxCemxr SUBSTRING(Col001,1,10)
In my source query I want to change the value of Source table ,Destination table and BBX expression dynamically on the basis of input file.
Purpose of making dynamic is that I have created separate sp for all the input, my clients want to have sungle dynamic sp which will execute on the basis of input file.this input file name I wil get fromm variable which i have created in SSIS Package.
Lets consider @File_name is the variable in package which store the file name
if file name is CCTFB then my query should take the Source table ,Destination table and BBX expression value from file master table.
Like that I have 100 of source query and evry query have diffrent number of columns. How can I change the column number in uodate and insert statement dynamically on run time.
CAST(SUBSTRING(Col001,1,6) + SUBSTRING(Col002,1,10) AS varchar(100)) :-It creates a key for comparing, this value i can take it from filemaster
HASHBYTES('MD5', CAST(CHECKSUM(Col001, Col002,Col003,Col004) AS varchar(max))) -here numberv of column need to be changed .
(SUBSTRING(SOURCE.Col001,1,6) + SUBSTRING(SOURCE.Col002,1,10)) this condition also i can take it from file master.
[Code] ....
I am able to get inserted and updated rowcount, but not able to get the matching records count.
View 0 Replies
View Related
Jan 9, 2015
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
View 4 Replies
View Related
Aug 13, 2014
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
View 1 Replies
View Related
Nov 11, 2014
I'm new to using SQL Server. I've been asked to optimize a series of scripts that queries over 4 millions records. I've managed to add indexes and remove a cursor, which increased performance. Now when I run the execution plan, the only query that cost is a DELETE statement from the main table. It shows a SORT which cost 71%. The table has 2 columns and a unique index. Here is the current index:
ALTER TABLE [dbo].[Qry] ADD CONSTRAINT [Qry_PK] PRIMARY KEY NONCLUSTERED
(
[QryNum] ASC,
[ID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = ON, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
Question: Will the SORT affect the overall performance? If so, is there anything I should change within the index that would speed up my query?
View 5 Replies
View Related
Jun 20, 2013
Problem Summary: Merge Statement takes several times longer to execute than equivalent Update, Insert and Delete as separate statements. Why?
I have a relatively large table (about 35,000,000 records, approximately 13 GB uncompressed and 4 GB with page compression - including indexes). A MERGE statement pretty consistently takes two or three minutes to perform an update, insert and delete. At one extreme, updating 82 (yes 82) records took 1 minute, 45 seconds. At the other extreme, updating 100,000 records took about five minutes.When I changed the MERGE to the equivalent separate UPDATE, INSERT & DELETE statements (embedded in an explicit transaction) the entire update took only 17 seconds. The query plans for the separate UPDATE, INSERT & DELETE statements look very similar to the query plan for the combined MERGE. However, all the row count estimates for the MERGE statement are way off.
Obviously, I am going to use the separate UPDATE, INSERT & DELETE statements. The actual query plans for the four statements ( combined MERGE and the separate UPDATE, INSERT & DELETE ) are attached. SQL Code to create the source and target tables and the actual queries themselves are below. I've also included the statistics created by my test run. Nothing else was running on the server when I ran the test.
Server Configuration:
SQL Server 2008 R2 SP1, Enterprise Edition
3 x Quad-Core Xeon Processor
Max Degree of Parallelism = 8
148 GB RAM
SQL Code:
Target Table:
USE TPS;
IF OBJECT_ID('dbo.ParticipantResponse') IS NOT NULL
DROP TABLE dbo.ParticipantResponse;
[code]....
View 9 Replies
View Related
Mar 5, 2015
I have a table which is updated daily using a MERGE statement. As records are insert, updated and deleted, I am saving the OUTPUT from the MERGE statement into a history table with a timestamp and action$ column appended to the record.
Using this history table, I'd like to rebuild the data based on specific past date. I was able to create a stored procedure that inspects each record in the history table and apply it to the data in a temp table. The stored procedure solution uses multiple queries to rebuild the data at a point in time. I was curious if there was an easier and more efficient solution using a table function.
View 2 Replies
View Related
Feb 18, 2014
How to Insert,Update and delete through script without using merge.I have simple requirement of Deleting,Inserting and Update from one table to other table...Here is the Sample Data
CREATE TABLE #Table1
(ID INT ,Name VARCHAR(30),DATEKEY INT)
INSERT INTO #Table1 (ID,Name,DATEKEY)VALUES (1,'Mohan',20131231)
INSERT INTO #Table1 (ID,Name,DATEKEY)VALUES (2,'Raj',20131231)
INSERT INTO #Table1 (ID,Name,DATEKEY)VALUES (3,'Majja',20131231)
INSERT INTO #Table1 (ID,Name,DATEKEY)VALUES (4,'Majjaa',20131231)
[code]...
So now i need to update 1st record and add another new record..So i need to update as well as delete the existing data in Target table.
INSERT INTO #Table1 (ID,Name,DATEKEY)VALUES (5,'Macha',20131231)
My output should come like this one :
IDNameDATEKEY
1Mohan20131231
5Macha 20131231
with out using merge how can i handle Update,insert and Delete through TSQL
View 5 Replies
View Related
Feb 14, 2014
I am trying to Write an update string for individual partID's. I wrote this query below but it isn't populating the time to test.
SELECT 'UPDATE Parts SET = [TimeToTest]' + ' ' +
Convert(varchar, (select test From [dbo].[db_PartsCats] as c Join Parts As P on P.category = C.CatID Where PartID = 48727))
+ ' ' + 'WHERE PartID = ' + CONVERT(varchar, P.PartID)
From Parts As P
Where FRID = 0 And TimeToTest = 0 and TimeToInstall = 0 and TimeToProgram = 0 And TimeToTrain = 0 And manufacturer = 187
Order By categoryMy results:
Should get UPDATE Parts SET = [TimeToTest] 0.5000 WHERE PartID = 48871 But getting Nulls instead
View 5 Replies
View Related
Dec 12, 2014
I run the following statement and it will not update beyond 7 million plus rows and I have about 38 million to complete. I keep checking updated row counts and after 1/2 day it's still the same so I know something is wrong because it was rolling through no problem when I initiated it. I need to complete ASAP so it's adding to my frustration. The 'Acct_Num_CH' field is an encrypted field (fyi).
SET rowcount 10000
UPDATE [dbo].[CC_Info_T]
SET [Acct_Num_CH] = 'ayIWt6C8sgimC6t61EJ9d8BB3+bfIZ8v'
WHERE [Acct_Num_CH] IS NOT NULL
WHILE @@ROWCOUNT > 0
BEGIN
SET rowcount 10000
UPDATE [dbo].[CC_Info_T]
SET [Acct_Num_CH] = 'ayIWt6C8sgimC6t61EJ9d8BB3+bfIZ8v'
WHERE [Acct_Num_CH] IS NOT NULL
END
SET rowcount 0
View 5 Replies
View Related
Jun 18, 2014
I am unable to update the data using record by record below scenario.
Required output:
patient will able to Admit/Re-admit multiple times in hospital, if a patient readmitted multiple times in hospital after the first visit, first visit record will get Re-admission=0 and Index=1. This visit should cal Index_Admission of that patient. using this index_admission should calculate the 30-day readmission.
Current Output:
Calculation: From index_admission discharge date to next admit_visit date,
1) if the diff is having less than 30 days, readmission=1 and Index=0
else readmission=0 and Index=1 should be update.
For checking this every time should check using the latest index_admission discharge_date.
To get this result i written below logic, but it's updating readmission=0 and Index=1 after 30-day post discharge of using first index admission.
UPDATE Readmission
SET Index_AMI = (CASE WHEN DATEDIFF(DD, (SELECT Sub.Max_Index_Dis FROM
(SELECT Patient_ID, MAX(Discharge_Date_Time) Max_Index_Dis FROM Readmission
WHERE Index_AMI = 1 AND FPR.Patient_ID = Patient_ID GROUP BY Patient_ID) Sub)
, FPR.Admit_Date_Time) between 0 and 31 THEN 0 ELSE 1 END),
[Code] ....
Expected Result:
View 5 Replies
View Related
Nov 25, 2014
I have a simple update statement (see example below) that when runs, I expect to see the number of records updated in the Results tab. This information shows up in the Messages tab; however, what is displayed in the Results tab is (No column name) 40. From where the 40 is being generated. I have tried restarting SSMS 2012, restarting my computer, turning NOCOUNT on and off.
"UPDATE TableA
SET Supervisor = 'A123'
WHERE PersonnelNumber = 'B456'"
View 4 Replies
View Related
Mar 14, 2014
I am using Merge Statement. Here is my requirement, I don't want to Insert data if Client State is NY, but I want to update all data
When Not Matched
and State not in ('NY')
THEN INSERT
the problem is sometime data NY data is inserted and sometime don't.
View 4 Replies
View Related
Feb 11, 2015
Even rowchecksum is different in target from source then also update is not happening
alter Procedure SP_Archive_using_merge
AS
BEGIN
SET NOCOUNT ON
Declare @Source_RowCount int
Declare @New_RowCount int
[Code] ....
View 1 Replies
View Related
Oct 7, 2014
Msg 4104, Level 16, State 1, Line 13
The multi-part identifier "Fatals_CTE.t_enrollmentID" could not be bound.
Here are the table definitions:
CREATE TABLE [dbo].[Enroll](
[enrollmentID] [int] IDENTITY(10000,1) NOT NULL,
[e_PatientID] [int] NOT NULL,
[e_ProtocolNo] [varchar](30) NOT NULL,
[enrollDate] [datetime] NULL,
[enrollOK] [bit] NULL,
[Code] .....
WHERE enrollmentID = Fatals_CTE.t_enrollmentID;
(I'm trying to update an enrollment's LeaveDate to the date of his Grade 5 event. )
View 2 Replies
View Related
Jul 29, 2015
In the following t-sql 2012 merge statement, the insert statement works but the update statement does not work. I know that is true since I looked at the results of the update statement:
Merge TST.dbo.LockCombination AS LKC1
USING
(select LKC.comboID,LKC.lockID,LKC.seq,A.lockCombo2,A.schoolnumber,LKR.lockerId
from
[LockerPopulation] A
JOIN TST.dbo.School SCH ON A.schoolnumber = SCH.type
[Code] ...
Thus can you show me some t-sql 2012 that I can use to make update statement work in the merge function?
View 3 Replies
View Related
Oct 20, 2014
I have a stored proc that contains an update which utilizes a case statement to populate values in a particular column in a table, based on values found in other columns within the same table. The existing update looks like this (object names and values have been changed to protect the innocent):
UPDATE dbo.target_table
set target_column =
case
when source_column_1= 'ABC'then 'XYZ'
when source_column_2= '123'then 'PDQ'
[Code] ....
The powers that be would like to replace this case statement with some sort of table-driven structure, so that the mapping rules defined above can be maintained in the database by the business owner, rather than having it embedded in code and thus requiring developer intervention to perform changes/additions to the rules.
The rules defined in the case statement are in a pre-defined sequence which reflects the order of precedence in which the rules are to be applied (in other words, if a matching value in source_column_1 is found, this trumps a conflicting matching value in source_column_2, etc). A case statement handles this nicely, of course, because the case statement will stop when it finds the first "hit" amongst the WHEN clauses, testing each in the order in which they are coded in the proc logic.
What I'm struggling with is how to replicate this using a lookup table of some sort and joins from the target table to the lookup to replace the above case statement. I'm thinking that I would need a lookup table that has column name/value pairings, with a sequence number on each row that designates the row's placement in the precedence hierarchy. I'd then join to the lookup table somehow based on column names and values and return the match with the lowest sequence number, or something to that effect.
View 9 Replies
View Related
Dec 11, 2014
We have a SSIS package which loads the data from csv files to DB. It only loads the new entries ie if the row already exists in the tables than it doesn't insert it. For this we load the CSV to temp tables for respective schemas and than those are compared with base tables of respective schemas and inserted new rows. For this we use Merge statement.
View 1 Replies
View Related
Oct 7, 2007
I'm working on a address book where customers can add, edit and delete address book entries. For the life of me I can't figure out what I'm messing up with the Update and Delete statements of this feature. Can someone please help me.Here's my code: <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConflictDetection="CompareAllValues" ConnectionString="<%$ ConnectionStrings:kalistadbConnectionString %>" DeleteCommand="DELETE FROM [Address] WHERE [AddID] = @original_AddID AND [AddNick] = @original_AddNick AND [AddFN] = @original_AddFN AND [AddLN] = @original_AddLN AND [AddCompany] = @original_AddCompany AND [AddAddress] = @original_AddAddress AND [AddCity] = @original_AddCity AND [AddProv_State] = @original_AddProv_State AND [AddPostal_Zip] = @original_AddPostal_Zip AND [AddCountry] = @original_AddCountry AND [AddPhone] = @original_AddPhone AND [CustID] = @original_CustID" InsertCommand="INSERT INTO [Address] ([AddNick], [AddFN], [AddLN], [AddCompany], [AddAddress], [AddCity], [AddProv_State], [AddPostal_Zip], [AddCountry], [AddPhone], [CustID]) VALUES (@AddNick, @AddFN, @AddLN, @AddCompany, @AddAddress, @AddCity, @AddProv_State, @AddPostal_Zip, @AddCountry, @AddPhone, @CustID)" OldValuesParameterFormatString="original_{0}" onselecting="SqlDataSource1_Selecting" OnInserting="SqlDataSource1_Inserting" SelectCommand="SELECT * FROM [Address] WHERE ([CustID] = @CustID)" UpdateCommand="UPDATE [Address] SET [AddNick] = @AddNick, [AddFN] = @AddFN, [AddLN] = @AddLN, [AddCompany] = @AddCompany, [AddAddress] = @AddAddress, [AddCity] = @AddCity, [AddProv_State] = @AddProv_State, [AddPostal_Zip] = @AddPostal_Zip, [AddCountry] = @AddCountry, [AddPhone] = @AddPhone, [CustID] = @CustID WHERE [AddID] = @original_AddID AND [AddNick] = @original_AddNick AND [AddFN] = @original_AddFN AND [AddLN] = @original_AddLN AND [AddCompany] = @original_AddCompany AND [AddAddress] = @original_AddAddress AND [AddCity] = @original_AddCity AND [AddProv_State] = @original_AddProv_State AND [AddPostal_Zip] = @original_AddPostal_Zip AND [AddCountry] = @original_AddCountry AND [AddPhone] = @original_AddPhone AND [CustID] = @original_CustID"> <SelectParameters> <asp:Parameter Name="CustID" /> </SelectParameters> <DeleteParameters> <asp:Parameter Name="original_AddID" Type="Int64" /> <asp:Parameter Name="original_AddNick" Type="String" /> <asp:Parameter Name="original_AddFN" Type="String" /> <asp:Parameter Name="original_AddLN" Type="String" /> <asp:Parameter Name="original_AddCompany" Type="String" /> <asp:Parameter Name="original_AddAddress" Type="String" /> <asp:Parameter Name="original_AddCity" Type="String" /> <asp:Parameter Name="original_AddProv_State" Type="String" /> <asp:Parameter Name="original_AddPostal_Zip" Type="String" /> <asp:Parameter Name="original_AddCountry" Type="String" /> <asp:Parameter Name="original_AddPhone" Type="String" /> <asp:Parameter Name="original_CustID" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="AddNick" Type="String" /> <asp:Parameter Name="AddFN" Type="String" /> <asp:Parameter Name="AddLN" Type="String" /> <asp:Parameter Name="AddCompany" Type="String" /> <asp:Parameter Name="AddAddress" Type="String" /> <asp:Parameter Name="AddCity" Type="String" /> <asp:Parameter Name="AddProv_State" Type="String" /> <asp:Parameter Name="AddPostal_Zip" Type="String" /> <asp:Parameter Name="AddCountry" Type="String" /> <asp:Parameter Name="AddPhone" Type="String" /> <asp:Parameter Name="CustID" /> <asp:Parameter Name="original_AddID" Type="Int64" /> <asp:Parameter Name="original_AddNick" Type="String" /> <asp:Parameter Name="original_AddFN" Type="String" /> <asp:Parameter Name="original_AddLN" Type="String" /> <asp:Parameter Name="original_AddCompany" Type="String" /> <asp:Parameter Name="original_AddAddress" Type="String" /> <asp:Parameter Name="original_AddCity" Type="String" /> <asp:Parameter Name="original_AddProv_State" Type="String" /> <asp:Parameter Name="original_AddPostal_Zip" Type="String" /> <asp:Parameter Name="original_AddCountry" Type="String" /> <asp:Parameter Name="original_AddPhone" Type="String" /> <asp:Parameter Name="original_CustID" /> </UpdateParameters> <InsertParameters> <asp:Parameter Name="AddNick" Type="String" /> <asp:Parameter Name="AddFN" Type="String" /> <asp:Parameter Name="AddLN" Type="String" /> <asp:Parameter Name="AddCompany" Type="String" /> <asp:Parameter Name="AddAddress" Type="String" /> <asp:Parameter Name="AddCity" Type="String" /> <asp:Parameter Name="AddProv_State" Type="String" /> <asp:Parameter Name="AddPostal_Zip" Type="String" /> <asp:Parameter Name="AddCountry" Type="String" /> <asp:Parameter Name="AddPhone" Type="String" /> <asp:Parameter Name="CustID" /> </InsertParameters> </asp:SqlDataSource>
View 2 Replies
View Related
Dec 8, 2006
Suppose your using Merge Replication.
2 Users in 2 locations issue updates to the same table. 1 updating 1 column and the other updating another column. Now in reality the actual Stored Procedure issuing the update statement is passed in all the possible columns that could change and builds an update statement that updates all columns even the ones that havent changed.
Will this break Merge Replications conflict tracking? Or does SQL Server 2005 Merge Replication pickup that in reality the 2 updates only in reality changed the values in 2 columns.
View 1 Replies
View Related
Dec 3, 2014
I have a database with enabling merge replication.
Then the problem is update query is taking more time.But when I disable the merge triggers then it'll update quickly.
View 1 Replies
View Related
Mar 26, 2008
Hi AllgI have problem in using the SQLDataSource. When in VS 2005 I drag and drop the SQLDataSource onto my page and then add a GridView control.I bind the GridView control to the SQLDataSource control. But the problem is it does not generate the INSERT, UPDATE, and DELETE statements. The dialog box is inactive. The screenshots may help. please help me in this regard. I also tried it for Accesscontrol but the same problem. Sorry for my poor English!. thanks in advancehttp://img205.imagevenue.com/img.php?image=27550_1_122_203lo.JPGhttp://img139.a.com/img.php?image=28285_2_122_937lo.JPG
View 1 Replies
View Related
Sep 29, 2015
We have a large number of SSISDB packages running happily, connecting to our SQL Servers using ADO.Net or Sql Native Client, making their connection using NTLM. (We don't have our SQL Server SPNs correctly configured to support Kerberos).
The SSISDB packages are hosted on and run on a dedicated SQL server, different to the SQL Servers they are connecting to.
Very occasionally, the connection attempt is made using Kerberos instead of NTLM, and the connection attempt to sql server fails. (This is going by the Windows Security event log, which reveals a Kerberos login - a successful one at the Windows level - at the precise time that the calling agent job is informed of a connection timeout and fails, approx 23 seconds after the job starts).
The correct configuration of our SPNs is something we may wish to look into for security best practice, and would of course fix this. However, that may not be my decision to make.
View 2 Replies
View Related
Apr 3, 2015
Is there a way in SQL server that can generate stored procedures for select, insert, update, delete on certain tables?
View 4 Replies
View Related
Mar 12, 2015
I'm not even sure this is possible but I'm using MERGE in a process that has 3 source tables (the process steps through each source table sequentially) and I need to delete from the Target database occasionally.
My current code is
sqlMerge = "MERGE " + TableName + " AS target USING @CData AS source" +
" ON target.TotRsp = source.TotRsp AND target.ClientRef = source.ClientRef AND target.dbPatID = source.dbPatID" +
" WHEN MATCHED THEN" +
" UPDATE SET dbPatFirstName = source.dbPatFirstName, dbPatLastName = source.dbPatLastName,
[Code] ....
The Target db data is made up from several different clients and when the MERGE runs it uses TotRsp, ClientRef and dbPatID to uniquely match a source row to the target row and if no match it inserts the source row.
My problem is that when this runs with Source A first, it will delete all merged data from Source B & C. Then when Source B runs it will insert all Source B data but delete all from A & C and so on.
Is there way that that I can include additional clauses into NOT MATCHED BY SOURCE THEN so it knows only to delete when data has come from say Source A. Once the data is in the target table there is no reference to which source table it came from tho.
If there isn't a solution I suppose I could always add an extra column to the target db to indicate which source it came from and then have something like
NOT MATCHED BY SOURCE AND t.Source = 'SourceA'.
That's quite a bit of work my end to do that tho so I'd like to be sure it works.
View 1 Replies
View Related
Sep 9, 2015
My current proc updates(updates using joins of two or three tables) millions of records as per the condition provided for each department.
However, when the proc fails it writes to a ErrorTable, ERROR_MESSAGE(), ERROR_SEVERITY() and which department has failed.
Since the records are updated keeping the selected departments in loop, I get the department in a temp variable.
Now, I was asked to log the specific record where the failure was occured.
Something like log the identity column value or primary key value which record has failed.
View 4 Replies
View Related
Jan 7, 2014
I have a table with a field called SeqId which is not an identity nor a sequence but a kind of autonumber field (max(SeqId) + 1). Now I have to do a MERGE between 2 tables where the one with SeqId is the target.
How can I get the next SeqId for every row added? I tried this:
MERGE dbo.CRM_MNP_ORIGINAL_NRN AS T
USING dbo.seriesnacionales AS S
ON (T.RANGE1 = S.RANGOINI )
WHEN NOT MATCHED THEN
INSERT (SeqId, Range1, Range2, OPERATORCODE, NRN, StartDate, CreateDate)
VALUES((SELECT dbo.FN_GetNextSeqId4CRM_MNP_ORIGINAL_NRN()), S.RangoIni, S.RangoFin, S.IdOperador,
'TEST_M', Convert(DATETIME, FECASIGNA , 103), SYSDATETIME())
WHEN MATCHED THEN
UPDATE SET T.Range1 = S.RangoIni, T.Range2 = S.RangoFin, T.OPERATORCODE = S.IdOperador
OUTPUT $action, Inserted.*, Deleted.*;
where the function just return Max(SeqId) + 1
but I always get the same value for that field.
View 2 Replies
View Related
Oct 20, 2014
I have some problem about Merge Replication.i'm trying to merge Database A to Database B in local Server. So Database i want publisher contain this:
Because only Data in Table change therefore so i choosed it 100% Snapshot was generated after that ( Problem not a valid window user i already figured out )After that. I created Local Subscription in same Server ( Pull subscriptions and Subscription type: Client ),now problem is throw out."The schema script 'vwBuyADT_513.sch' could not be propagated to the subscriber."
I tried research so many time in Google but any information i found isn't useful for this problem.This problem still can ignore,Synchronization still running. But after 4-5 Hours running..This messages throw out: "The Publisher failed to allocate a new set of identity ranges for the subscription. This can occur when a Publisher or a republishing Subscriber has run out of identity ranges to allocate to its own Subscribers or when an identity column data type does not support an additional identity range allocation"
My question is:
Is there anyway solve 2 probem? :
1. "The schema script 'vwBuyADT_513.sch' could not be propagated to the subscriber."
2. "The Publisher failed to allocate a new set of identity ranges for the subscription. This can occur when a Publisher or a republishing Subscriber has run out of identity ranges to allocate to its own Subscribers or when an identity column data type does not support an additional identity range allocation"
View 7 Replies
View Related
Feb 1, 2007
Hi seniors
there are two tables involve in replication let say table1 and replicated table is also rep.table1.
we are not deleting records physically in table1 so only a bit in table1 has true when u want to delete a record but the strange thing is that replication agaent report that this is hard delete operation on table1 so download and report hard delete operation and delete the record in replicated table which is very crucial.
plz let me know where am i wrong and how i put it into right way.
there is no triggers on published tables and noother trigger is created on published table.
regards
Ahmad Drshen
View 6 Replies
View Related
