i want to combine upper two tables data like below result sets. Means they should be grouped by bsns_id and its description should be comma separated taken from 2nd table. In sql server 2012.
I have two totally different tables with completely different data fields. Also, there is no common relationship between these two tables. However, I want to pick few data fields from the each table and merge into a new table! Is this even possible?
There is an error in one of my merge publication. The error is,
The change for the row with article nickname 2336003 (test), rowguidcol {436456F0-F5AD-E411-80CF-5CF3FC1D2D76} could not be applied at the destination. Further information about the failure reason can be found in the conflict logging tables.
When i checked my tables I got following values in rowguid column
1. Take a subset of data from about 100 tables that have multiple references to other tables in this group of 100 from a first DB. 2. Insert the above data into a second DB, a database that already has data in the 100 tables, while maintaining the correct references.
As a general approach, the best way I can think of doing this is as follows:
1. Create mapping tables for every ID that is referenced in a different table (OldID NewID) 2. Insert the old data into the new table and output the OldID and NewID into the mapping table. 3. Use that mapping data to make sure all tables that use those IDs have the new IDs in DB2.
This approach is extremely labor intensive both on initial implementation and would require a fairly substantial amount of work to maintain going forward.
I am currently writing a query to show the quote number and its brand names inside that quote which should be separated with "/" if there are different brands in a quote. see below.
I have a query currently that looks like this . @Month and @Year are supplied as parameters
SELECT -- select the sum for each year/month combination using a correlated subquery (each result from the main query causes another data retrieval operation to be run) (SELECT SUM(SalesofProductA) FROM #ABC WHERE [Year]=T.[Year] AND [Month]=T.[Month]) AS [Sum_SalesofProductA]
[Code] ...
Right now I see an output like this : for a particular value of @Month and @Year
SalesofProductA, SalesofProductB, SalesofProductC What I would like to see is :
I need to make a query that counts installed developer software for all our developers (from the sccm database), for licensing purposes. The trick here is that a license should only be counted once per. developer and that should be the highest version. But in the database, the developers can have different versions of the software installed (upgrades) on the same computer and they often use several computers with different software versions.
So for example: A source table with two developers
------------------------------------------------------------------- | dev1 | comp1 | Microsoft Visual Studio Ultimate 2013 | dev1 | comp1 | Microsoft Visual Studio Professional 2010 | dev1 | comp2 | Microsoft Visual Studio Premium 2010 | dev2 | comp3 | Microsoft Visual Studio Professional 2010 | dev2 | comp4 | Microsoft Visual Studio Premium 2012 --------------------------------------------------------------------
I want the result to be: ----------------------------------------------------- | dev1 | Microsoft Visual Studio Ultimate 2013 | dev2 | Microsoft Visual Studio Premium 2012 ------------------------------------------------------
I have created a query using cursors that give me the correct result, but it's way to slow to be acceptable (over 20 min..). I also toyed with the idea of creating some sort of CRL proc or function in C# that does the logic, but a SCCM consultant from MS said that if I create any kind of custom objects on the SCCM SQL Server instance, we loose all support from them. So I'm basically stuck with using good old fashioned T-SQL queries.
My idea now, is to use a CTE table and combine it with a Temp table with the software and a rank. I feel that I'm on the right track, but I just can't nail it properly.
This is how far I have come now:
IF OBJECT_ID('tempdb..#swRank') IS NULL CREATE TABLE #swRank(rankID int NOT NULL UNIQUE, vsVersion nvarchar(255)) INSERT INTO #swRank(rankID, vsVersion) VALUES (1, 'Microsoft Visual Studio Ultimate 2013'), (2, 'Microsoft Visual Studio Ultimate 2012'),
I have found a bunch of duplicate records in our housing database that ideally I need to delete.There are two tables that I need to remove data from ih_cml_log_entry and ih_cml_log_notes. There is no unique identifier between the tables for a log entry. So I have had to join on the person_ref, log_seq and the date/time of entry.How do I go about deleting the data - I've used the script below to identify what I need to delete -
SELECT * FROM ( select cml.person_ref, cml.open_date + open_time as 'datetime',cml.open_user,cml.log_type ,ROW_NUMBER() OVER (PARTITION BY cml.person_ref, cml.open_date + cml.open_time,cml.open_user,cml.log_type ORDER BY (SELECT 0)) AS RowNo ,n.note FROM ih_cml_log_entry cml
In a Library Management database we have these tables
1) Document ( DocNo , Doc_type , permalink,inDate) 2)Title(id, DocNo,Main_Title, Other_Title) 3)Author(id , Author_Name , Author_Family,Type--Like:main author , translator ,....) 4)Publisher(id,DocNo , Name,Publisedate,address) 5)Subject(id,DocNo,Subject) 6)Description(id,DocNo,ISBN,description)--one document may have some ISBN,etc
In document table I have 500,000 records.
I want to search a word in these tables ,for example i want to search 'Computer' ,this word may be in subject or title or description and etc. How can I do this with best performance?
I have 6 tables which are very huge in row count and records needs to deleted which are older than 8 days.
Little info: Every day, 300 Million records are inserted in below 7 tables. we should maintain only 8 days worth of data in below tables. How to implement Purge script which can delete records in all tables in the same time and with optimized parallelism.
Master table which has [ID],[Timestamp] Table Name: Sample - 2,578,106
Child tables: Foreign key [ID] is common for all the tables. There is no timestamp column in child table. So the records needs to deleted based on Min(ID) from Sample
I need to consume a live data feed from a golf tournament. And by consume, I really mean insert (merge) into our own SQL Server database on a regular intervals as a tournament progresses.This site didn't let me upload an XML file, but you can see a sample of the data feed here: URL....
I need to insert this data into 2 tables, Player_Holes and Player_Shots. But while doing the insert, I need to lookup several things such as our player ID match to theirs on an external_id against the players table. The shot types translation, and some other logic about the process overall.
The columns in my player_holes tables are: id, player_id, hole_id, round, shots (this is a total # of strokes) and date_created/date_modified.Shots table is similar: id, player_id, hole_id, round, shot_number, shot_type_id, club, distance, date_created/date_modified.
The only way I know how to do it, is inefficient. I would parse the XML in ColdFusion (please no comments on ColdFusion, that's what we use for webdev), and then loop over it and do inserts for each player, each hole for each round, and the shots would probably be separate for each hole.
It would be so much better and more efficient if I could do it in SQL directly. I've done some research and SQL Server Data Tools looks promising. I've never used it, so would have to learn, but also I'm not sure if that'd work in this application when we want to run is as a scheduled task every few minutes.
If F.parent_id(101)=T.team_id(101) and T.team_id(101)=T.parent_folder_id (101) then output should come as 'Mobile/c' (this is for f.parent_id=101)
If F.Parent_id=T.team_id and T.team_id!=T.parent_folder_id then parent_folder_id have to start search on team_id column where it got match and pick the Team_name from that corresponding id
Ex: F.parent_id=202 is matching with T.Team_id (202) but this T.team_id(202) is not matching with T.parent_folderid(200) , so this T.parent_folderid (200) have to search on T.id (200) ,if now T.id(200) is matching with T.Parent_folder_id(200) then it have to give the names from the starting hirache
I'm pulling data from XML into tables, but I'm unsure how to link the data after it's imported. This example has names and tasks, and I can pull the data into two tables, but I can't find any way to link the task to the appropriate person. My person and task tables populate without issue, but there's nothing I can find to link the rows together. So in this example Test 1 would go to the first two Tasks and Test 2 would go to the second two work items.
Request is to merge or join or case stmt or union or... from up to four unique columns all in separate tables to new combined table (matrix) of results from said.
I posted the questions in sql forum and got good sql statement to work with it.. However, I want to see if there is a way to do it in SSIS..
May be this is really basic questions but I am having hard time to do it in sql server 2005 SSIS..
I have a flat file that I want to merge with table in SQL server 2005.
1> I have successfully created a data flow task to import data from flat file to Table X (new table I created for this package).
Now here is my question. I have a Table A already in the database with the same column structure as of TableX (Both the tables have 20 columns/same Name/Same design).
I want to merge Table A and Table X and stored the data in TableA. However, I just don't want to merge blindly, I need to insert a new row in Table A only if the same row does not exist in Table A (there is no primary key, i am looking certain fields to see if the rows are same)..
Here is an example: Table A -------------- 1 test test1 test2 test3 test4 test5 2 test test6 test7 test8 test9 test10
Table X ------------ 1 test test1 test2 test99 test4 test5 2 test test98 test97 test 96 test95 test94 -------------------------------------------------------- Now, I want to only insert row 2 of Table X since there is match on 4 of the fields in row1.. The new Table A should look like
NEW Table A' -----------------
test test1 test2 test3 test4 test5 test test6 test7 test8 test9 test10 test test98 test97 test 96 test95 test94
------------------------------------ I think, I could do this using Execute SQL task and write all the code in sql, but that will be cumbersome and time consuming.. Is there a simpler way to achieve this?
Picture tells all what i need. Anyway i want to combine upper two tables data like below result sets. Means they should be grouped by bsns_id and its description should be comma separated taken from 2nd table. In sql server 2012 ....
I have a table with a field called SeqId which is not an identity nor a sequence but a kind of autonumber field (max(SeqId) + 1). Now I have to do a MERGE between 2 tables where the one with SeqId is the target.
How can I get the next SeqId for every row added? I tried this:
MERGE dbo.CRM_MNP_ORIGINAL_NRN AS T USING dbo.seriesnacionales AS S ON (T.RANGE1 = S.RANGOINI ) WHEN NOT MATCHED THEN INSERT (SeqId, Range1, Range2, OPERATORCODE, NRN, StartDate, CreateDate) VALUES((SELECT dbo.FN_GetNextSeqId4CRM_MNP_ORIGINAL_NRN()), S.RangoIni, S.RangoFin, S.IdOperador, 'TEST_M', Convert(DATETIME, FECASIGNA , 103), SYSDATETIME()) WHEN MATCHED THEN UPDATE SET T.Range1 = S.RangoIni, T.Range2 = S.RangoFin, T.OPERATORCODE = S.IdOperador OUTPUT $action, Inserted.*, Deleted.*; where the function just return Max(SeqId) + 1
I have some problem about Merge Replication.i'm trying to merge Database A to Database B in local Server. So Database i want publisher contain this:
Because only Data in Table change therefore so i choosed it 100% Snapshot was generated after that ( Problem not a valid window user i already figured out )After that. I created Local Subscription in same Server ( Pull subscriptions and Subscription type: Client ),now problem is throw out."The schema script 'vwBuyADT_513.sch' could not be propagated to the subscriber."
I tried research so many time in Google but any information i found isn't useful for this problem.This problem still can ignore,Synchronization still running. But after 4-5 Hours running..This messages throw out: "The Publisher failed to allocate a new set of identity ranges for the subscription. This can occur when a Publisher or a republishing Subscriber has run out of identity ranges to allocate to its own Subscribers or when an identity column data type does not support an additional identity range allocation"
My question is: Is there anyway solve 2 probem? : 1. "The schema script 'vwBuyADT_513.sch' could not be propagated to the subscriber." 2. "The Publisher failed to allocate a new set of identity ranges for the subscription. This can occur when a Publisher or a republishing Subscriber has run out of identity ranges to allocate to its own Subscribers or when an identity column data type does not support an additional identity range allocation"
Basically if the type code is 1 one then move the data to column phone1, if the type is 2 then move it to column phone2.
This would be fairly simple if we always have type codes 1 and 2. But sometimes we can have type 1 and not type 2, or we could have type 2 and not type1.
Right now we only have 2 type codes. But, in the future we could be adding a 3rd type. So that would add a 3rd column (phone3).
Below is my code that I have written. I move the data into a temp table then list it. I am thinking of making this a view to my table. It works just fine. My question is, is there a better and more efficient way of doing this?
CREATE TABLE #Contacts ( id INT PRIMARY KEY, phone1 VARCHAR(15), phone2 VARCHAR(15) )
-- Insert the records for type 1
INSERT INTO #Contacts SELECT id, phone_num, NULL FROM test1 WHERE type_code = '1'
-- Insert the records for type 2, if the id does not exist for type 1
INSERT INTO #Contacts SELECT id, NULL, phone_num FROM test1 WHERE NOT EXISTS ( SELECT 1 FROM #Contacts WHERE #Contacts.id = test1.id ) AND test1.type_code = '2'
-- if the id has both type 1 and 2, update the phone2 column with the data from type 2
UPDATE #Contacts SET phone2 = test1.phone_num FROM #contacts JOIN test1 ON test1.id = #Contacts.id WHERE type_code = '2' SELECT id, phone1, phone2 FROM #Contacts DROP TABLE #Contacts
I have created mergse statement using SCD2.where I am inserting the data if my BBxkey is not matching with target and updating the rows if the bbxkey is matching and rowchecksum is different.
Working of Store procedure
There are 2 scenario covered in this procedure on the basis of that ETL happening.
There are 2 columns deriving from source table at run time, one is BBxkey which is nothing but a combination of one or more column or part of column and another column is a Rowchecksum column which is nothing but a Hashvalue of all the column of the tables for a row.
Merge case 1:-WHEN NOT MATCH THEN INSERT
If source BBxkey is not there in Archive table that means if BBxKey is null then those records are new and it will directly inserted into Archive table.
Merge case 2:-WHEN MATCH THEN UPDATE
If Source.BBxkey=Target.BBxkey && Source.Rowchecksum<>Target.Rowchecksum then this means source records are available in Archive table but data has been changed, in this case it will update the old record with latestversion 0 and insert the new record with latestversion 1.
my sp failing when source having more than 1 same bbxkey.
error [Execute SQL Task] Error: Executing the query "EXEC dbo.ETL_STAGE_ARCHIVE ?" failed with the following error: "The MERGE statement attempted to UPDATE or DELETE the same row more than once. This happens when a target row matches more than one source row. A MERGE statement cannot UPDATE/DELETE the same row of the target table multiple times. Refine the ON clause to ensure a target row matches at most one source row, or use the GROUP BY clause to group the source rows.".
We have a table in an SQL Server 2012 database that stores tree-like structures. Simplified for the purpose of my question, it has the following format:
Id int identity, ParentId int, GroupId int
Each record of the table represents an object identified by Id. An object may or may not have a parent in the same table, such that object.ParentId = parentObject.Id. A root object has ParentId = NULL. There are multiple root objects, so the table in fact stores multiple trees. What’s important is that the tree depth is not fixed, i.e. theoretically there can be any number of ancestor generations for an object. GroupId is a property of a root object; in theory none of the children of a root object has to have GroupId <> NULL; it can be assumed that any child has the same GroupId value as its root object.
A sample table having two roots (one grandparent and one parent), one non-root parent/child and 4 child roots:
The table is not normalised, i.e. there’s no separate {root_object : group} table. However I don’t think normalising the table would solve the problem.
Now the problem. We need to set up merge replication from the table above (Master table) to the table of the same format in another DB. We need to replicate only those rows of the Master table that have a certain fixed GroupId value, e.g. 200 in the example above. If we ensure that GroupId in all descendant objects of a root object has the same value in the table as the root object itself that would be trivial. The table would look like this:
However out of performance considerations, we would like to avoid if possible filling GroupId for the descendant objects, because as it must be clear from the above, GroupId for a descendant object is quite easily deducible via a stored procedure or UDF (just need to go up the tree until ParentId = NULL). The problem is, I don’t know how to achieve this in a merge replication filter: it would only allow WHERE conditions and joins. I’ve have not had much luck with joins for merge replication in general, but here we have more complex algorithm, because the number of tree levels can be different for every object. And merge replication would not allow using UDF…
In a t-sql 2012 merge statement that is listed below, the insert statement on the merge statement listed below is not working. The update statement works though.
Merge test.dbo.LockCombination AS LKC1 USING (select LKC.lockID,LKC.seq,A.lockCombo1,A.schoolnumber from [Inputtb] A JOIN test.dbo.School SCH ON A.schoolnumber = SCH.type
[Code] ....
Thus would you tell me what I need to do to make the insert statement work on the merge statement listed above?
I am using the following select statement to get the row count from SQL linked server table.
SELECT Count(*) FROM OPENQUERY (CMSPROD, 'Select * From MHDLIB.MHSERV0P')
MHDLIB is the library name in IBM DB2 database. The above query gives me only the row count of table MHSERV0P. However, I need to get the names, rowcounts, and sizes of all tables that exist in MHDLIB librray. Is it possible at all?
I have resulting rows from a query similar to the following:
The data is coming from a single table that contains only one coverage code column and one coverage code date, but the end user wants the two coverage code types and dates combined into a single row. So the SELECT looks something like this:
SELECT [Employee ID] = emp.employee_id, [Coverage Code 1] = enr.coverage_code, [Coverage Date 1] = enr.coverage_date, [Coverage Code 2] = case when enr.product_type = 'Accident.Accident' then enr.coverage_code else NULL end,
[Code] ....
I basically want to merge the like Employee ID's together into a single row like the following:
I know I have done this before and it is probably pretty simple.
In my source query I want to change the value of Source table ,Destination table and BBX expression dynamically on the basis of input file.
Purpose of making dynamic is that I have created separate sp for all the input, my clients want to have sungle dynamic sp which will execute on the basis of input file.this input file name I wil get fromm variable which i have created in SSIS Package.
Lets consider @File_name is the variable in package which store the file name
if file name is CCTFB then my query should take the Source table ,Destination table and BBX expression value from file master table.
Like that I have 100 of source query and evry query have diffrent number of columns. How can I change the column number in uodate and insert statement dynamically on run time.
CAST(SUBSTRING(Col001,1,6) + SUBSTRING(Col002,1,10) AS varchar(100)) :-It creates a key for comparing, this value i can take it from filemaster HASHBYTES('MD5', CAST(CHECKSUM(Col001, Col002,Col003,Col004) AS varchar(max))) -here numberv of column need to be changed . (SUBSTRING(SOURCE.Col001,1,6) + SUBSTRING(SOURCE.Col002,1,10)) this condition also i can take it from file master.
[Code] ....
I am able to get inserted and updated rowcount, but not able to get the matching records count.
I have created a Dynamic Merge statement SCD2 Store procedure , which insert the records if no matches and if bbxkey matches from source table to destination table thne it updates old record as lateteverion 0 and insert new record with latest version 1.
I am getting below error when I ahve more than 1 bbxkey in my source table. How can I ignore this.
BBXkey is nothing but I am deriving by combining 2 columns.
Msg 8672, Level 16, State 1, Line 6
The MERGE statement attempted to UPDATE or DELETE the same row more than once. This happens when a target row matches more than one source row. A MERGE statement cannot UPDATE/DELETE the same row of the target table multiple times. Refine the ON clause to ensure a target row matches at most one source row, or use the GROUP BY clause to group the source rows.
