Why am I getting message "A valid table name is required for in, out, or format options."
I used the syntax from a tutorial about bcp utility. I am trying to create a format file for flat file import and export.
My server instance is "stat-hpsqlexpress"
The database name is "STATRLO"
Owner is "dbo"
Table name is "PM-allactivity-emaillog_042315"
The bcp comand I am trying to run is:
bcp STATRLO.dbo.PM-allactivity-emaillog_042315 format nul -c -t, -f C:databaseActivity_c.fmt -S stat-hpsqlexpress - T
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. SQL Server Version: Microsoft SQL Server 2012 (SP1) - 11.0.3153.0 (X64) Jul 22 2014 15:26:36 Copyright (c) Microsoft Corporation Business Intelligence Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
Yes I know the instance says sqlexpress...it was upgraded.
I have a table which is updated daily using a MERGE statement. As records are insert, updated and deleted, I am saving the OUTPUT from the MERGE statement into a history table with a timestamp and action$ column appended to the record.
Using this history table, I'd like to rebuild the data based on specific past date. I was able to create a stored procedure that inspects each record in the history table and apply it to the data in a temp table. The stored procedure solution uses multiple queries to rebuild the data at a point in time. I was curious if there was an easier and more efficient solution using a table function.
I have the following code and the result set is coming out as nvarchar. So, when I create a report in SSRS, it is not formatting as a date.
, CASE WHEN isnull(cv2.Accepted,0)='True' AND cv2.Visit ='V2' AND cv2.StepNo='3' THEN 'Y' ELSE CONVERT(varchar,[dbo].[fn_Get_WorkingDays] (co.PlannedGoLiveDt, -10)) END AS 'System Verified'
I am working on a code that will convert the query output into a html query output. That is the output of the query will be along with html tags so that we can save it as a html file.
The stored procedure that i have used is downloaded from symantec website and is working fine. Below is the code of that stored procedure.
/****** Object: StoredProcedure [dbo].[sp_Table2HTML] Script Date: 12/21/2011 09:04:30 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[sp_Table2HTML] ( @TABLENAME NVARCHAR(500), @OUTPUT NVARCHAR(MAX) OUTPUT,
[Code] ....
The code works fine and i am able to get the output with html tags. The problem occurs when i insert stylesheet in the code. I tried to enforce styles using a stylesheet for the table returned in my sql code, so that it will look good. below is the stylesheet code that i inserted between <head> and </head> tags.
If I run the procedure without the style sheet code, it works fine. but when i run the procedure with style sheet code i am getting the below errors.
Msg 105, Level 15, State 1, Line 98 Unclosed quotation mark after the character string '</table></body><'. Msg 102, Level 15, State 1, Line 98 Incorrect syntax near '</table></body><'.
[Code] .....
I checked the code and i am not able to find what is the mistake. I tried changing the quotation mark but it didn't worked.
insert into Test123 values(1,'Name','X') insert into Test123 values(1,'Age',50) insert into Test123 values(1,'Salary',1000) insert into Test123 values(2,'Name','Y') insert into Test123 values(2,'Age',30) insert into Test123 values(2,'Salary',2000) insert into Test123 values(3,'Name','Z') insert into Test123 values(3,'Age',35) insert into Test123 values(3,'Salary','One Hundred')
And I want output in below format.
AttributeValueType ================= AGE | NUMERIC NAME | ALPHABET SALARY | ALPHANUMERIC ==================
I have a table of "applicants" with unique applicant id and another table "reviews" with reviews which has unique id and Emplid and contains general program name like Math and then may contain 3 addition rows for specific program like Calculus, algebra, geometry etc.
There may or may not be a record for each applicant id in table reviews or there can be 1 or more than one record in reviews based on level of review( General or Specific).
All the general reviews has “Math” as Program_code but if there are more reviews, they can have Program_code like “Cal” , “Abr”, “Geo”
I want to join the tables so I can get all the records from both the tables where Program_code in reviews table is “Math” only.
That is I want to join the table and get all the records from reviews table where the program_code is “Math” only How can I do that?
I've the following T-SQL block that I'm executing where I want to print the following output in next line but not sure how to do this:
This is printing everything in one line: SET @BODYTEXT = ' Dear ' + @fname +',We realize you may have taken ' + @course_due + ' in '+ @month_last_taken +'.'
How do I do this: SET @BODYTEXT = ' Dear ' + @fname + ',We realize you may have taken ' + @course_due + ' in '+ @month_last_taken +'.'
Also how can I create a table in this variable, something like this:
(TABLE) LIST THE COURSE CODE, COURSE NAME , EMPLOYEE ID, EMPLOYEE NAME
(Course Name) (Last Completed) (Now due in Month/year)
My T-SQL code:
DECLARE @email varchar(500) ,@intFlag INT ,@INTFLAGMAX int ,@TABLE_NAME VARCHAR(100) ,@EMP_ID INT ,@fname varchar(100)
I have been given a request at work that requires us to run the SQL scripts that are held in a report configuration table and output the results as .csv or.xls files in a desired folder with a file name that is also specified within the report config table.
An example of the table is as per script below with column A being the desired file name to be created and Column B contains the script that will be executed.
Ideally I require a script that i can drop into a Stored Proc that will run down each row in the table and export and create each rows results as a separate file in a desired folder.
------------------------------------------------------------------------------------------ -----SAMPLE TABLE SCRIPT ----------------------------------------------------------- ------------------------------------------------------------------------------------------ /****** Object: Table [dbo].[Test_Table_PS] Script Date: 21/09/2015 09:14:57 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[Test_Table_PS]( [File_Name] [nvarchar](100) NULL,
INSERT INTO Query_results(login_name, total_elapsed_time, total_elapsed_time) SELECT login_name, total_elapsed_time, total_elapsed_time FROM sys.dm_exec_sessions
I need to then kill all sessions at 11:59pm then log all those that are killed. This is so I can schedule a job at that time, I have sessions that are blocking my job.
i m creating one google map application using asp.net with c# i had done also now that marker ll be shown from database (lat,long)depends on the lat,long i wanna display customer,sales,total sales for each makers in html table format.
Row 1 with identity 1 has rolled over to new quarter row 4 with identity 4 ( qtr fields are changed ) Row 2 with identity 2 has rolled over to new quarter row 5 with identity 5. Same with last row as well.
Here, i have another table called "ident_map" with columns like (old identity, new identity ) and during rollover i am supposed to load ident_map table with old and new identity. So after rollover is complete, ident_map table should look like
1,4 2,5 3,6
I know using output clause I can capture the new identity values. 4,5,6 in this case. But is there any way to capture both old identity and new identity during rollover so that i can load the ident_map table with old and new identity.
I have created SSRS report which has many overlapping objects, the output in PDF format seems to good but in word format it is not giving the required output.
I am unable to update the data using record by record below scenario.
Required output:
patient will able to Admit/Re-admit multiple times in hospital, if a patient readmitted multiple times in hospital after the first visit, first visit record will get Re-admission=0 and Index=1. This visit should cal Index_Admission of that patient. using this index_admission should calculate the 30-day readmission.
Current Output:
Calculation: From index_admission discharge date to next admit_visit date,
1) if the diff is having less than 30 days, readmission=1 and Index=0
else readmission=0 and Index=1 should be update.
For checking this every time should check using the latest index_admission discharge_date.
To get this result i written below logic, but it's updating readmission=0 and Index=1 after 30-day post discharge of using first index admission.
UPDATE Readmission SET Index_AMI = (CASE WHEN DATEDIFF(DD, (SELECT Sub.Max_Index_Dis FROM (SELECT Patient_ID, MAX(Discharge_Date_Time) Max_Index_Dis FROM Readmission WHERE Index_AMI = 1 AND FPR.Patient_ID = Patient_ID GROUP BY Patient_ID) Sub) , FPR.Admit_Date_Time) between 0 and 31 THEN 0 ELSE 1 END),
To get the results of a stored proc into a table you always had to know the structure of the output and create the table upfront.
CREATE TABLE #Tmp ( Key INT NOT NULL, Data Varchar );
INSERT INTO #Tmp EXEC dbo.MyProc
Has SQL 2012 (or SQL 2014) got any features / new tricks to let me discover the table structure of a stored procedure output, - i.e treat it as a table
EXEC dbo.MyProc INTO #NewTmp or SELECT * INTO #NewTmp FROM ( EXEC dbo.MyProc )
I want to select all the records, and them them be in alphabetical order first by lastname, then by firstname, then by address. HOWEVER, and this is the tricky part, I want to group names together that have the same address. So, in this example, I want the results to be in this order:
HallC6309 N Olive HallP6309 N Olive <---- grouped with the C record because they have the same address HallE5488 W Catalina <---- back to alphabetical by first name HallJ7222 N Cocopas
I've got an OLEDB DB2 linked server to a db2/AS400 instance and selecting from a table on the server has never caused problems before. One of the columns is a large text field. If I select all the columns but the large text field, it returns as normal, but including the large text field now, I get:
"Transport error: shared memory provider error: 0 - no process is on the other end of the pipe"
The largest entry in the text field is about 5k characters, and there don't appear to be any strange characters.
I have written a SQL statement.There is a table called customer.It contains all customer data with customerid as PK.There is another table called logs and it contains customerid as foreign key and it contains a field to keep more than 90 days older user accounts.That field name is "Checked"
What I need get all records from these 2 tables and remove/hide more than 90 days older customers from record set.See my illustration.
I have written this code but I dont understand how to remove more than 90 days older user from result (because customer table doesnt contain a record called "Checked")
SELECT * FROM [dbo].[Customers],[dbo].[VIESLog] WHERE [dbo].[VIESLog].[Checked] < DATEADD(day, -90, GETDATE())
I am trying to create an ssis package with dynamic csv file as output. and out format contains query output.
sample file name:
Unique identifier + query output + systemdate();
The expression is looking like this.
@[User::FilePath] + @[User::FileName] + ".CSV"
-- user filepath is a variable from ssis package. File name is the output from SQL query. using script task i have assigned the values to @[User::FileName] .
When I debugged the script task the value getting properly but same variable am using for Flafile destination. but its not working.
This store procedure will get some executable queries from the select statement, the cursor will fetch each rows to execute the query and insert the queries into table_3 to mark as 'E'. Until 17:00, this store procedure will stop execute the queries and just get the queries from select statement insert into table_3 to mark as 'C'.
I don't know why the outputs in table_3 are quiet different than I think. This store procedure comes out with two exactly same queries and one marked as C and another marked as E.
CREATE PROCEDURE procedure1 AS DECLARE cursor_1 CURSOR FOR SELECT 'This is a executable query' FROM table_1 DECLARE @table_2
I want to ship 500,000 aged transactions each night to an archive table and delete them from their source table in one or more logical units of work (LUW). Each row is approx 60 bytes and there is only one non clustered index on the source table presently.
I'm trying to weigh the pros and cons of 3 alternatives. One of them would basically insert the non-aged rows into tempdb, ship the aged records, truncate the table and then insert the tempdb records back into their source all in the same LUW.
For this alternative, I'd at least like to turn off logging when the records get inserted into tempdb as I dont see any value in logging that part of the activity. Is this possible?
I'm trying to find a specific string (a name) and replace it with another inside of a VARCHAR(7000) field. Unfortunately, there are names like Ted and Ken that I'm trying to replace. I would like to leave words like Broken, admitted, etc... intact.
UPDATEtbl SETBody = LEFT(REPLACE(tbl.Body, pm.OldFirstName, p.FirstName), 7000) FROM Table tbl JOIN Person p ON p.PersonID = tbl.PersonID JOIN PersonMap pm ON pm.PersonID = p.PersonID AND LEN(pm.OldFirstName) > 2 WHEREtbl.Body LIKE '%[^a-z]'+pm.OldFirstName+'[., ]%
'The problem I'm running into is that the '[, ]%' in the LIKE excludes any record that ends with the FirstName because it is requiring either a space, comma or period after the name. Is there some way to add an empty string to the list of acceptable characters as that would cover any scenario in the data? I would prefer not to add all characters except space, comma and period, but I guess I could do that.
I have an Address column that I need to Substring. I want to remove part of the string after either, or both of the following characters i.e ',' OR '*'
Example Record 1. Elland **REQUIRES BOOKING IN*** Example Record 2. Theale, Nr Reading, Berkshire Example Record 3. Stockport
How do I achieve this in a CASE Statement?
The following two case statements return the correct results, but I some how need to combine them into a single Statement?
,LEFT(Address ,CASE WHEN CHARINDEX(',',Address) =0 THEN LEN(Address ) ELSE CHARINDEX(',' ,Address ) -1 END) AS 'Town Test'
,LEFT(Address ,CASE WHEN CHARINDEX('*',Address ) =0 THEN LEN(Address) ELSE CHARINDEX('*' ,Address ) -1 END) AS 'Town Test2'