I have one stored proc that uses the Row_number over partition that looks like this:
Select TargetID, Academic_Year_id, Course_Mode, UK_Enrol, Int_Enrol, Notes, Revision_Number from
(SELECT ROW_NUMBER() OVER (partition by [Academic_Year_id] order by [Revision_Number] DESC) as [RevNum],TargetID, Academic_Year_id, Course_Mode, Target_Year, UK_Enrol, Int_Enrol, Notes, Revision_Number
FROM tbl_targets where course_mode=@course_mode) RV where (RV.RevNum=1)
Now the next store proc needs to use the above but i need to add the Academic_year from the tbl_acyear_lookup table also add filter the target_year ='year 1'
(idAuxiliarPF(BIGINT+PK), pf(BIGINT+FK), Data(DateTime), Descr(NVARCHAR))that has aprox. 50k rows.
I need to create a partition of the data to join to another table, the query that i have:
SELECT ROW_NUMBER() OVER (PARTITION BY pf ORDER BY Data DESC, idAuxiliarPF DESC) AS RN, pf, Data, Descr FROM dbo.PFAuxiliar WHERE Data <= GETDATE()This query takes around 40 seconds to return the results
If i remove the Descr column, the query it takes no time.
SELECT ROW_NUMBER() OVER (PARTITION BY pf ORDER BY Data DESC, idAuxiliarPF DESC) AS RN, pf, Data FROM dbo.PFAuxiliar WHERE Data <= GETDATE()I have two indexes, Clustered (idAuxiliarPF), NONClustered(pf).
DECLARE @DatePartitionFunction nvarchar(max) = N'CREATE PARTITION FUNCTION DatePartitionFunction (datetime) AS RANGE RIGHT FOR VALUES ('; DECLARE @i datetime = '2007-09-01 00:00:00.000'; WHILE @i < '2008-10-01 00:00:00.000' BEGIN SET @DatePartitionFunction += '''' + CAST(@i as nvarchar(10)) + '''' + N', ';
[Code] ....
Msg 7705, Level 16, State 2, Line 1 Could not implicitly convert range values type specified at ordinal 1 to partition function parameter type.
However if I change to datetime2 it works
DECLARE @DatePartitionFunction nvarchar(max) = N'CREATE PARTITION FUNCTION DatePartitionFunction (datetime2) AS RANGE RIGHT FOR VALUES ('; DECLARE @i datetime2 = '2007-09-01 00:00:00.000'; WHILE @i < '2008-10-01 00:00:00.000' BEGIN SET @DatePartitionFunction += '''' + CAST(@i as nvarchar(10)) + '''' + N', ';
[Code] ...
Is the data type of the column used for partitioning. All data types are valid for use as partitioning columns, except text, ntext, image, xml, timestamp, varchar(max), nvarchar(max), varbinary(max), alias data types, or CLR user-defined data types.
In this case why isn't datetime works?
version is as follow:
Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64) Dec 28 2012 20:23:12 Copyright (c) Microsoft Corporation Enterprise Evaluation Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
from [URL] .....
Table and index partitioning is supported in this edition
I’m looking for clearity on partition switching. The idea is to use many BULK INSERT statements into table dbo.X_n in parallel and when BULK INSERT for table dbo.X_n is completed, switch dbo.X_n into dbo.bigdaddy. I think this is the fastest way to upload a couple hundred GB of data.
In learning about partition switching (in part) from The Data Loading Performance Guide under Partition SWITCH, I hear the instructions to say copy the main table exactly to become a target. But in that same step (#1), I read that we need to change the default file group of the target (dbo.X_n) from the default file group. Then it says I need to match indexes and lists the filegroup as something we need to match with the main table.
As an overview of the partition switching strategy, I think the whole point of BULK INSERT with partitioning is to have seperate files (in same group) to enable concurrent uploading where each table has its own file. Once the upload is completed to a table (dbo.X_n) then we do the partition switch into the main table (dbo.bigdaddy). The data we just uploaded doesn’t actually move, just the metadata for it.
“Don’t have the same filegroup on your target as the main table. You must have the same filegroup on your target as the main table.”
WITH summary AS (SELECT tu.SequenceNumber, tu.trialid, tu.SBOINumber, tu.DisplayFlag,
[Code] ....
I am having trouble with the RowNumber Over Partition By portion of the query. I would like the query to return only the first occurrence of each sboinumber in the table for each trial id. It is only giving me the first occurrence of each sboinumber. I tried including the trialid in the partition by clause, but that is not working.
Is it possible to show the number of rows and the range for each partition in a table ?
This shows me the range but not the row count per partition
SELECT sprv.value AS [Value], sprv.boundary_id AS [ID] FROM sys.partition_functions AS spf INNER JOIN sys.partition_range_values sprv ON sprv.function_id=spf.function_id WHERE (spf.name=N'myDateRangePF') ORDER BY [ID] ASC
I have 3 columns. I would like to update a table based on job_cd and permit_nbr column. if we have same job_cd and permit_nbr, reference number should be same else it should take max(reference number) from the table +1 for all rows where reference_nbr column is null
How can I make partitions on a table for a particular value and ranges together?
For example, for customer id 12345 i need a separate partition, then for 56789 i need a separate partition, and if i have range of values like 1000 to 1020 then a separate partition for this.
For certain ids i need unique partition, and for certain ids i need Ranges.
How to add some more ranges to existing partition schema and function?
Already My table partitioned on date ranges,
6 partitions , each partition contains 6 moths data, so total data is 3 years.
i.e. 1 partition data- from jan2012 to Jun2012 2 partition data- from july2012 to dec2012 3 partition data- from jan2013 to Jun2013 4 partition data- from july2013 to dec2013 5 partition data- from jan2014 to Jun2014 6 partition data- from july2014 to dec2014 After Jan2015 data will go to Primary file group(Default)
Now customer wants to add two more file groups with these partitions ranges, i.e. jan2015 to jun15 and Jul15 to dec15.
File group and ndf file adding is OK, But
how to alter partition scheme and partition function with these additional ranges to existing partition function and scheme?
With this query i get only the records i need, but i would like to output in this way
1 - 20 21 - 30 31 - 40
of course in the real environment the ID are not consecutive, this is just one example of data.
declare @temp table (ID int) declare @i int = 1 while(@i<1000) begin insert into @temp values (@i) set @i=@i+1 end select ID from ( select ID, row_number() over (order by ID) as rn from @temp ) q where (rn % 20=0) OR (rn % 20=1)
How to create a row number for a consecutive action. Example: I have a listing of people who have either completed a goal or not. I need to count by person the number of consecutively missed goals.
My sql table is this: PersonId, GoalDate, GoalStatus (holds completed or missed)
My first thought was to use the rownumber function however that doesn’t work because someone could complete a goal, miss a goal, then complete one and when they complete a goal after a missed goal the count has to start over.
In a t-sql 2012 select statement, I have a query that looks like the following:
SELECT CAST(ROUND(SUM([ABSCNT]), 1) AS NUMERIC(24,1)) from table1. The field called [ABSCNT] is declared as a double. I would like to know how to return a number like 009.99 from the query. I would basically like to have the following:
1. 2 leading zeroes (basically I want 3 numbers displayed before the decimal point)
2. the number before the decimal point to always display even if the value is 0, and
I am trying to calculate the number of hours a device has been used and I cant find how. I need a query that calculated and does an average of the number of hrs used in a week.
A New Monthly data is being loaded, checked and finally approved after 6 or 7 iteration before approval.Because of this iteration the monthly data set is being added then deleted then added then deleted few times.Because the table is big this process takes time, any thoughts on how to make the delete insert process faster.Keep in mind I cannot do much because it is a production table and is being access by other users to do other analysis.
Delete is done based on trx_date which is a year/month combo, like 201508.
The table has monthly sales by customer aggregated.
The table structure is:
CREATE TABLE [dbo].[Sales]( [batch_key] [int] NOT NULL, [Company_key] [int] NOT NULL, [customer_key] [char](22) NOT NULL, [Trx_Date] [int] NOT NULL, [account] [nvarchar](35) NOT NULL,
IF OBJECT_ID('tempdb..#Test') IS NOt NULL DROP TABLe #Test --===== Create the test table with create table #Test([Year] float, Age Int, ) INSERT INTO #Test ([Year], Age)
[Code]...
I queried below to get additional column
Select *,row_number() over(partition by [Year] order by Age) as RN from #Test as
Below is the scenario which I have currently in my query. I need to write this query without any hardcode values , so that it will work til n number of years without modifications.
Startdate = CASE WHEN Trandate between '06-04-2013' and '05-04-2014' then '06-04-2013' Trandate between '06-04-2012' and '05-04-2013' then '06-04-2012' Trandate between '06-04-2011' and '05-04-2012' then '06-04-2011' Trandate between '06-04-2010' and '05-04-2011' then '06-04-2010' Trandate between '06-04-2009' and '05-04-2010' then '06-04-2009' Trandate between '06-04-2008' and '05-04-2019' then '06-04-2008' END
add a number to the end of an ID to create a series.For example, I have an EventID that may have many sub events. If the EventID is 31206, and I want to have subEvents, I would like have the following sequence. In this case, lets say I have 4 sub Events so I want to check the EventID and then produce:
312061 312062 312063 312064
How can I check what the EventID is, then concatenate a sequence number by the EventID?
For example in a table with this fields "field1, L1,L3,L100" field2 the count is 3
it would be better to match a number into the like but i thinks it cannot be done in the like so i've to add another condition to ensure all the text after L is a number.
is this the best way to do it?
Select count(*) from Information_Schema.Columns Where Table_Name = @Table AND column_name like 'L%' and ISNUMERIC(SUBSTRING(column_name,2, len(column_name)-1))=1
I have to create a table like this across a bunch of servers. I'm thinking that I'm overlooking something with needing two additional CTEs, but maybe not. I have it at 17 seconds, which isn't much faster than a while loop solution that's currently in place.
I have already created a table name 'tblHolidays' and populated with 2014 Holidays. What I would like is be able to calculate (subtract or add) number of days from a date. For example subtract 2 days from 07/08/2014 and function should return 07/03/2014.
CREATE FUNCTION [dbo].[ElapsedBDays] (@Start smalldatetime, @End smalldatetime) RETURNS int AS BEGIN /* Description: Function designed to calculate the number of business days (In hours) between two dates.
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
I am having one store procedure which use to load data from flat file to staging table dynamically. everything is working fine.Staging_temp table have single column.All the data stored in that single column below is the sample Data.
I need to calculate the last two columns (noofgrp and grpsize) No of Groups (count of Clientid) and Group Size (number of clients in each group) according to begtim and endtime. So I tried the following in the first Temp table
GrpSize= count(clientid) over (partition by begtime,endtime) else 0 end and in the second Temp Table, I have select ,GrpSize=sum(grpsize) ,NoofGrp=count(distinct grpsize) From Temp1
The issue is for the date of 5/26, the begtime and endtime are not consistent. in Grp1 (group 1) all clients starts the session at 1030 and ends at 1200 (90 minutes session) except one who starts at 11 and end at 1200 (row 8). For this client since his/her endtime is the same as others, I want that client to be in the first group(Grp1). Reverse is true for the second group (Grp2). All clients begtime is 12:30 and endtime is 1400 but clientid=2 (row 9) who begtime =1230 but endtime = 1300. However, since this client begtime is the same as the rest, I wan that client to be in the second group (grp2) My partition over creates 4 groups rather than two.
